Files in the adump directory

Similar Questions

• an error occurred trying to rename a file in the destination directory code 5

  When I try the installed software on this time its error getting
  ; an error occurred trying to rename a file in the destination directory code 5

  Hi Sissi,

  1. What is the full error message do you get?

  2. This only happens when you try to install a particular program?

  3. using the administrator account?

  Step 1:

  You can try to take ownership of the file or the folder and check.

  How to capture a file or a folder in Windows

  Step 2:

  I also suggest you temporarily disable the antivirus software third and firewall on the computer and check to see if that fixes the problem.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

• reproductive Extender invalid files in the installation directory - how to correct?

  My computer Guard stops. When it restarts, it displays a message 'invalid or missing files in the installation directory. Please reinstall Extender Player". How can I fix it?

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to boot in safe mode?
  3. do you have the Extender player installed on your computer?

  If so have you tried to re - install?

   

  
  Method 1.
  If you are able to boot to the desktop then disable automatic reboot.

  My computer properties > Advanced tab > startup and recovery settings > uncheck automatically restart.

   

  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  Note: Configure the computer to start in the State of clean boot to Safe Mode and check.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

   

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  
  I hope this helps.

• How to *. ZIP has *. CSV file in the Oracle Directory?

  Hello! How are you doing guys?

  I have a question;

  How to Zip, a CSV file in the oracle directory?

  I use this method, but a mistake;

  Error; Invalid file operation, this line: utl_file.get_raw (v_arquivo_out, strbufferdd);

  ___The Script___

  v_arquivo_out: = utl_file.fopen ('ORA_DIR',-/ oracle/files/ORA/ORADIR /)

  "DOC. CSV', - file name

  "WORLD BANK");

  UTL_FILE.get_raw (v_arquivo_out, strbufferdd);  <-this line a mistake.

  strbufferdd: = UTL_COMPRESS.lz_compress (strbufferdd, 6);

  V_SDIRECTORY: = TO_CHAR (SYSDATE, ' DD_MM_YYYY_HH24.MI.) SS') | "_RETORNA. ZIP';

  psDsc_File: = v_sDirectory;

  v_arquivo_out2: = utl_file.fopen ('ORA_DIR',-/ oracle/files/ORA/ORADIR /)

  psDsc_File,

  'W');

  -as_zip.

  Utl_File.Put_Raw (v_arquivo_out2, strbufferdd);

  UTL_FILE.fclose (v_arquivo_out);

  UTL_FILE.fclose (v_arquivo_out2);

  ___End SCRIPT___

  Help me?

  Thank you to all the world, I have the solution;

  Please see the procedure;

  CREATE OR REPLACE PROCEDURE 'PR_RELAT_CSV '.

  (

  peCod_Prog in DOCUMENT. Type of Cod_Prog %,

  psDsc_File out varchar2

  )

  IS

  -variaveis para land

  v_arquivo_out utl_file.file_type;

  v_separator varchar2 (1): = "";

  v_sDirectory varchar2 (200);

  src_file BFILE.

  v_content BLOB;

  v_blob_len INTEGER.

  v_file UTL_FILE.file_type;

  v_buffer RAW (32767).

  v_amount directory: = 32767;

  v_pos INTEGER: = 1;

  BEGIN

  -DADOS PREENCHIDOS. ABAIXO, CRIAR PREENCHER E O LAND CSV

  V_SDIRECTORY: = TO_CHAR (SYSDATE, ' DD_MM_YYYY_HH24.MI.) SS') |

  ' _RETORNA. CSV';

  psDsc_File: = v_sDirectory;

  v_arquivo_out: = utl_file.fopen ('ORA_DIR',-/ oracle/files/oradir/ora /)

  psDsc_File,

  'W');

  cabecalho - write

  UTL_FILE.put_line (v_arquivo_out,

  "Organize" | v_separator | ' OPTIONS / Options'.

  v_separator | "AP" | v_separator | "CODE" |

  v_separator | 'Description of the PN | v_separator |

  "Station". v_separator | "Initial SN | v_separator |

  "Final SN | v_separator | 'Note ' | v_separator |

  'Pos ' | v_separator,

  (FALSE);

  -write linhas

  / * n : = 0 ; Contador * /.

  for rec_ (SELECT DISTINCT a.*, d.DSC_ITEM, e.COD_PN_MAT

  OF pcm_subestacao one

  LEFT JOIN (select b.cod_prog,

  c.num_arj,

  c.cod_itens,

  c.DSC_ITEM,

  c.COD_SEST_CONJ

  of pcm_desenho b

  INNER JOIN TABLE (fu_pcm_Combinar_Subestacao ('SYSTEM', b.cod_prog, b.num_arj, 0, null, null, null,)) c

  ON b.num_arj = c.num_arj

  and b.cod_prog = peCod_Prog) d

  ON a.cod_sest_conj = d.cod_sest_conj

  INNER JOIN pcm_mat_geral e

  ON e.cod_cemb_mat = a.cod_cemb_estc

  WHERE a.cod_prog = peCod_Prog

  loop of the order of a.num_arj, num_ns_i, num_ns_fn)

  / * n : = n + 1 ; Contador linhas * /.

  UTL_FILE.put_line (v_arquivo_out,

  Chr (34) | Chr (32) | rec_. NUM_ARJ | Chr (32) |

  Chr (34) | v_separator | Chr (34) | Chr (32) |

  rec_. DSC_ITEM | Chr (32) | Chr (34) | v_separator |

  Chr (34) | Chr (32) | rec_. COD_PN_SEST | Chr (32) |

  Chr (34) | v_separator | Chr (34) | Chr (32) |

  rec_. COD_CEMB_SEST | Chr (32) | Chr (34) |

  v_separator | Chr (34) | Chr (32) | rec_. DSC_PN_SEST |

  Chr (32) | Chr (34) | v_separator | Chr (34) |

  Chr (32) | rec_. COD_PN_MAT | Chr (32) | Chr (34) |

  v_separator | Chr (34) | Chr (32) | rec_. NUM_NS_I |

  Chr (32) | Chr (34) | v_separator | Chr (34) |

  Chr (32) | rec_. NUM_NS_FN | Chr (32) | Chr (34) |

  v_separator | Chr (34) | Chr (32) | rec_. DSC_OBS |

  Chr (32) | Chr (34) | v_separator | Chr (34) |

  Chr (32) | rec_. IND_POS | Chr (32) | Chr (34) |

  v_separator,

  (FALSE);

  end loop;

  UTL_FILE.fclose (v_arquivo_out);

  src_file: = BFILENAME ('ORA_DIR', psDsc_File);

  DBMS_LOB. FileOpen (src_file, dbms_lob.file_readonly);

  v_content: = utl_compress.lz_compress (src_file);

  v_blob_len: = DBMS_LOB.getlength (v_content);

  V_SDIRECTORY: = TO_CHAR (SYSDATE, ' DD_MM_YYYY_HH24.MI.) SS') |

  ' _RETORNA. CSV. ZIP';

  psDsc_File: = v_sDirectory;

  v_file: = utl_file.fopen ('ORA_DIR',-/ oracle/files/ORADIR/ORA /)

  psDsc_File,

  "WORLD BANK");

  Everything v_pos< v_blob_len="">

  DBMS_LOB. READ (v_content, v_amount, v_pos, v_buffer);

  UTL_FILE.put_raw (v_file, v_buffer, TRUE);

  v_pos: = v_pos + v_amount;

  END LOOP;

  UTL_FILE.fclose (v_file);

  EXCEPTION

  WHILE OTHERS THEN

  IF UTL_FILE.is_open (v_file) THEN

  UTL_FILE.fclose (v_file);

  END IF;

  LIFT;

  END PR_RELAT_CSV;

• Illustrator crashes when saving files in the default directory not in Mac OS 10.10 or OS 10.11. What is the solution?

  Illustrator crashes when saving files in the default directory not in Mac OS 10.10 or OS 10.11. What is the solution?

  There is no solution.

  If that is your only question, you should be happy.

  El Capitan Yosemite and CS5 are not compatible. For some people it can run more or less, for others not so much.

• Read the csv file in the Windows directory

  Hi all
  
  I have a requirement to fill an Oracle table with the CSV file in the Windows directory.
  Please help me to achieve this goal.
  
  Thank you.
  
  Published by: Amit1cs on June 4, 2013 08:46

  Then I suggest you mark this thread as answered and repost on the SQL/PLSQL forum. This forum is for Developer SQL related questions.

  Good luck in your task!

• you have to copy a file to the root directory...

  IM using winscp to copy a netapp host utility, but it must be copied into the directory "root" and run it from that directory.

  Of course, using winscp, as I can only log in with a user account that I created in esx and not root. How to copy a file to the directory root?

  That's what the Solution says to do, does that mean that I have to copy the files in the root directory?

  ESX host utilities install script fails when it is called in 'su' environment

  Keywords: VMware ESX host utilities

  Solution

  Utilities of the host needs to the environment of the root, or by logging in as "root" or by switching to the root with su - environment Installing the utilities of the host in the root environment by running the command: su -

  You can use root - as long as you allow root ssh access - what is advised.

  Another alternative is to download Veeam FastSCP (free) and use it - with this you can authenticate with your user account non-root, but you can elevate your privileges specifying the root account. It is the method and the tool I use. You'll have to excuse my lack of terminology Linux

• OMB * Plus the command to the list of files in the current directory

  UNIX-based OMB * more customer supports the command 'ls' for a list of the files in the current directory (OS).
  
  Does OMB non-windows * more customer have a similar command? I tried the two 'ls' and 'dir' without a bit of luck.
  
  I use the Windows OMB 11.2.0.2 version * more customer.
  
  Thank you.

  Use tcl commands to get the platform independence, so, for example, you can use
  glob *.
  to list all the files or
  *.XML glob
  for all XML files in the directory.

  See below for details of the glob command
  http://www.tcl.TK/man/tcl8.4/TclCmd/glob.htm

  You can use cd to change directories because I think that the version of TCL used is older and does not support the - directive of the directory on the glob command.

  See you soon
  David

• Why finder hide Documents and office files in the home directory of the user by activating iCloud drive? What about the behavior of Time Machine backup or third-party applications?

  I'm under MacOS Sierra. I am connected to my iCloud account. I activated the option Desktop and Documents, but I did NOT activate the option optimize Mac storage, because I wanted to make sure that all my files would be available locally, just in case, I would need to work without an internet connection.

  -J' noticed there now a menu iCloud in my sidebar in the Finder, with links to Documents and desktop.

  -J' also noticed that Documents is no longer presented in my favorites in my side bar of the Finder.

  -This last suggests that files saved in 'Documents' are not saved more on my HD... but only in iCloud, which isn't what I want.

  -Then, sailing in the Finder Macintosh HD/users / 'My account' /, I noticed that my Documents and desktop folders are more visible, as if these files are not saved in my home folder most. Which raises the question: where are My Documents and files on my HD, so they are still?

  -Using a shell session in the terminal and again navigate to/Users / 'My account' /, I noticed that my Documents and desktop folders are still there. Which suggest that records and records of office reside actually still in my home folder under users, but Finder actually hide it and present them as being stored in iCloud only disc. It's very confusing.

  This raises several questions:

  -In the first place, why Apple hide Documents and office files in the directory? Why not view these folders in iCloud and directory?

  -Whence the iCloud folder or drive, reside actually on my hard drive?

  -What time Machine. Is it still back up my document files and folders?

  -What games third-party app mirroring backup of My Documents files and folders? They still work properly? (I use Livedrive backup and Sugarsync for files mirrored across several macs).

  -How can I understand that Apple is doing with my folders and files? Some users might be happy with the iCloud drive concept, without worrying about how it works, but I don't take chances, and I want to keep a good understanding about the functioning of my system.

  Could someone explain what is exactly happening?

  With office and selected Documents, access to these files are now in the iCloud Drive, not in your home folder.

  My guess would be that they do not appear in your file because it would be confusing for many people to make them in two places.

  If you want in the Favorites, open iCloud Drive and drag them in the sidebar here.

  All about iCloud drive has been saved on your Mac. With the exception of the office and the Documents, they are in ~/Library/Mobile Documents. However, if you choose optimized storage, older documents are removed from your Mac. I don't know what is "old".

  ~/Documents and ~/desktop have new metadata indicating probably Finder does not display them in a Finder window, only in iCloud drive. They are not hidden in one of the normal methods of unix.

  I have not tested Time Machine or any other backup program. The folder still exist in your directory home, and they still have all the files, I don't think that changes anything.

• iTunes not finding files in the same directory

  I have about 350 missing files in my library of thousands of songs iTunes music - I do not know how iTunes lost track of them, because I did not move, but I replace the hard drive that my library had a few weeks back.  Apart from that, if I find a single file to an album, iTunes then asks the standard question, "would you live iTunes to use the < name of track > location to find other missing files in your library?  When I click on the "Search files" button in this dialog box, iTunes allows you to easily search the rest of the album that was missing.  However, he is not doing this and now impossible to find one of my other missing music.  I'll have to match every file missing one at a time, which will be incredibly tedious.

  Is this a bug introduced in a recent version of iTunes?  This feature is used to work properly, although I have not used in the better part of a year now.  My PC is running Windows 10 and iTunes v12.4.1.6.  I've probably will eventually present it as a question to the support of iTunes, but wanted to see if another person had this same experience first and might know what is happening.

  Thank you!

  The "missing file" error occurs if the file is no longer where iTunes is expected to find. Causes possible is that you or a third-party tool has moved, renamed or deleted the file, one of its parents, or the reader, records it feeds has been a change in the letter of the drive or you have moved a non-portable library to a different path (see make a split cell library for more details). It is also possible that iTunes has changed from waiting for the files in the presentation of pre-iTunes 9 post-iTunes 9 layout, or vice versa, and so looking for a bit in the wrong place.

  Select a track with an exclamation point, use Ctrl - I to get the information, and then click No when asked to try to locate the track. Look under the file tab for the location that iTunes thinks that the file should be. Now look around your hard drive. I hope you can locate the track in question. If a part of your library has just been moved, renamed a folder or a drive letter has changed, it should be possible to reverse actions. If the difference between the two railroads is an additional music directory in a path, then it is a problem of layout. I can explain more if this is the case. If everything is where it is supposed to be trying to fix the security permissions for iTunes for Windows.

  In some cases, iTunes may be able to repair itself if you go through the same steps with Get Info, or during playback of a track, but this time, click on search and browse the lost track. Then, it can offer try to automatically correct the other broken links. Although he said something like 'use the same location' I think he expects to find titles in the same provision, artist / album, they were previously, with a systematic change to the path.

  If another application like Windows Media Player has moved/renamed files, or the library was moved from OS X to Windows, then chances are that subtle differences in naming strategies it will be difficult to restore the media to the precise path that iTunes is pregnant. In this case, as long as the missing files somewhere, you should be able to use my FindTracks script for reconnecting to iTunes. See this post for an explanation of how it works.

  If you want me to try to provide specific advice, please post back the following details:

  1. The location of the media under Edition folder > Preferences > advanced

  2. The location of a sample of missing follow indicated under Get Info > file > location that begins file://localhost/

• The real path to the file which you gave 2 details

TT2

• Can I delete files in the root directory

  Just look at my root directory and trying to clean up what is not needed.  I have Win7 64 bit.  Can I delete one of these files?

  . RMD
  {45F28847-516F-40B7-9C6C-7A08E848927B}
  {03793A 38 - AB8E - 48AB - B8DE - C78202EOFC83}
  {97782997-1B5D-4500-8514-8DCC63EFF45E}
  app_messagelog.scvlog
  install.exe
  Setup.ini
  install.log
  java_log.txt
  Msdia80.dll

  Hi paulboca,

  Thanks for posting your query on the Microsoft Community.

  Description number, I want to know if can delete files as Setup.ini, install.log, etc.

  I suggest you not to remove all the files in the root of the drive because they are system files and they are necessary for windows works properly.

  If he wants to free up space, you can delete the temporary files.

  Follow these steps.

  a. press the Windows key + R.

  b. now enter hit and type temp

  c. now delete all the temporary files.

  d. Similiarly, you can delete the prefetch and %Temp% files by repeating the steps above.

  You can also check this link.

  http://Windows.Microsoft.com/en-us/Windows7/optimize-Windows-7-for-better-performance

  Hope the above information helps.

  Do get back to us and let us know the State of the issue of your next post or in the cases where you need assistance about Windows.

• Workgroup Windows 7 - can see the folders, but not files in the shared directory

  I have three windows on the same workgroup machines (2 machines Windows 7 [A, B] and [C] XP machine). I have a shared folder on the [A], with many subfolders. When I created first the part, [B] has been able to see all files and folders in the shared directory on [A]. Next, I added several subfolders on [A]. Now, [B] can see new subfolders but not the files in the breast. Why is that happening and how can I solve this problem?

  [A] and [B] are capable of full access to the shared folders on [C]. The permissions on the shared folder on [A] are set to "Everyone" + read/write. I tried several reboots of each machine. Hit "Refresh" on [B] does not make the files appear. It is not password-protected. It turns out that [C] has exactly the same problem as [B], that makes me think there is something to do with the share on [A], but I can't understand it.

  On [A].

  Under sharing advanced > caching, I chose only "the files and programs that specify users are available in offline mode."

  Under [advanced sharing] > permissions, "Everyone" is given full control, change, and read them.

  Under [advanced sharing] > permissions > Add > locations, machine [A] is visible, but are not machines [B, C].

  Any thoughts? Thanks in advance!

  Hello

  Thanks for the reply and keeping the status updated.

  There are options of shares with different depending on whether your PC is connected to a network and what type of network is.

  To share the points with a particular person, choose the account of this person.

  To share with all members of your home group, choose one of the options Group of the House .

  To select libraries to share with all the members of your home group, swept from the right edge of the screen, tap settingsand then tap Change PC settings. (If you use a mouse, point to the upper right of the screen, move the pointer of the mouse down, click settingsand then click change PC settings). And then tap or click home group.

  To prevent a file or a folder shared with anyone, press or click the share tab and then press or click stop sharing.

  To change the level of access to a file or folder, press or click on the sharing tab, and then select Home group (view) or collective (view and edit) home.

  If you need to share a location such as a disk or system file, use the Advanced sharing option.

  Change the settings for network, file sharing discovery, sharing public folders, sharing protected by password, home group of connections and file sharing connections.

  To turn on network discovery, file and sharing printers, and public folder sharing in Windows 7

  Control Panel > network and sharing Center > change advanced sharing settings > public folder sharing.

  -Turn on sharing so anyone with network access can open files.

  -Turn on sharing so anyone with network access can open, change and create files.

  Hope this information is useful. Just reply with the results. We will be happy to help you. 
  

• Unable to save the files in the root directory of windows 7

  When I try to save a file in the directory root (c:\) on a Windows 7 PC I get a message saying "you have not ti permission to save in this location." Contact the administrator for permission.

  On this PC, I am a member of the Administrators group.

  Any suggestions on how I can gain read/write access to the directory root

  You can't because C:\ is considered a system folder. It is a question of UAC and is here on a daily basis - see here: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/permissions/1821b1b7-19ae-4e15-b414-dd63635e5f94

• Missing files in the Application directory.

  I just installed Adobe CS6 (I'm more used to it) on my computer. However, whenever I try to open the app, it just says, "some of the application content are missing from the Application directory. Please reinstall the application. "When I try to reinstall the application, it says simply,"Installer failed to initialize. This could be a missing file. Someone at - it solutions to this problem?

  Gus.Alves are you continue to receive this error?  If Yes, then I recommend Creative Suite 6 to uninstall and reinstall.  If you need a new copy of the retail installation files, they are available to Download Adobe Creative Suite 6 applications.

  If you continue to receive errors or have questions feel free to update this discussion.

• Automatically copy the files in the output directory

  Hello
  
  I had two files of fonts (e.g. a.ttf and b.ttf) I want to automatically be copied inside ViewController\classes when I run the application.
  I copied them into ViewController\src, but it did not work. What should I do? Is there something to wear?
  Currently, I make the copy manually every time I have ordered a new copy of the project.
  
  In any case, I use JDev 11.1.1.4.0
  
  Thank you
  Will do

  Your can check this if you add the file suffix ".ttf" for the types of files that are automatically copied to the output directory.
  To do this, open the project properties and select the node "Compilation".
  Here, you add ".ttf" to filter "Types of files to copy to output directory" and all files with the suffix '.ttf' are automatically copied to the output directory.

  Timo