Missing files in the Application directory.

Similar Questions

• reproductive Extender invalid files in the installation directory - how to correct?

  My computer Guard stops. When it restarts, it displays a message 'invalid or missing files in the installation directory. Please reinstall Extender Player". How can I fix it?

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to boot in safe mode?
  3. do you have the Extender player installed on your computer?

  If so have you tried to re - install?

   

  
  Method 1.
  If you are able to boot to the desktop then disable automatic reboot.

  My computer properties > Advanced tab > startup and recovery settings > uncheck automatically restart.

   

  Method 2.
  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.

  Note: Configure the computer to start in the State of clean boot to Safe Mode and check.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

   

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  
  I hope this helps.

• "Invalid or missing resource in the installation directory files. Please reinstall Extender player. "

  Original title: I recently started getting this message; "Invalid or missing resource in the installation directory files. Please reinstall Extender player. "What that means and how to fix it?

  No message at this time.

  Hey Terrie,

  Put the computer in a clean boot State to determine what software or program is the cause of this problem.

  http://support.Microsoft.com/kb/331796?WA=wsignin1.0

  Note: When finished troubleshooting, turn the computer back to normal mode by following the steps in "how to regain a normal Windows startup mode.

  In the start-up of the system configuration utility box tab, see if you have "GPlayer" or "EXTender". If Yes, then uncheck the boxes and if you do not use these programs, so go ahead and uninstall them.

  http://Windows.Microsoft.com/en-in/Windows7/uninstall-or-change-a-program

  Let us know the results once you have finished troubleshooting.

• Among application components are missing from the Application directory, please reinstall the application.

  Among application components are missing from the Application directory, please reinstall the application.

  Hello

  Please use clean tool to uninstall the application-

  https://helpx.Adobe.com/creative-cloud/KB/CC-cleaner-tool-installation-problems.html

  see the help document for install it again-

  https://helpx.Adobe.com/creative-cloud/help/manage-apps-services-desktop.html

  You can also check I get a message "among application components are missing from the application directory, please reinstall the application. .

  I hope this helps!

• Photoshop CS5, I get the message: some application components are missing from the Application directory, please reinstall the application.

  Trying to open Photoshop CS5 I get the following Message: among application components are missing from the Application directory, please reinstall the application.

  Can I get these downloaded components that my optical drive is broken.

  Download the CS5 products

• After you have reinstalled Photoshop CS5, among the components of the application are missing from the application directory. Put it back, didn't work

  After you have reinstalled Photoshop CS5, among application components are missing from the application directory. Reinstall the application does not work.

  UINSTALL cs5, clean and reinstall then by, use the CC cleaning tool to resolve installation problems. CC, CS3 - CS6

• Photoshop CC - components of Application in the Application Directory

  Hello - I would appreciate help from the Adobe community.

  I'm trying to install Adobe Photoshop CC (2015), but continue to receive the error:

  "Some of the application components are missing from the Application directory, please reinstall the application." whenever I try to launch the app (see screenshot below).

  Download / Extraction / installation process runs successfully whenever I have attempt it... I have reinstalled the application six times, as well as followed the instructions to use the Adobe cleaning tool to remove all components of Creative Cloud and redownloaded the creative cloud application as well as the CC of Photoshop...

  I restarted my computer every time... still nothing does not.

  I looked through the logs in the PDApp.log file and found these two error messages:

  [ERROR] |  | USS | OPM | P7Native |  |  | 7372 | OOBElib returned error: 1

  [ERROR] |  | USS | OPM | CryptEngine |  |  | 6512. Build failure key3List

  System information:

  I am running Windows 7 Enterprise - Service Pack 1; 64 bit

  Intel i7 - 2640 M CPU @ 2.8GHz

  16 GB OF RAM

  Version of Adobe Creative Cloud 3.6.0.248

  Help, please. Really have no idea what to do next...

  

  Contact adobe support using a Web browser that accepts cookies and allows pop up windows, click here and as soon as it is available, click "still need help," https://helpx.adobe.com/contact.html

• TENS of installation in the application directory--> cannot find directory RTE

  Hello

  I couldn't find an answer of fitting about my problem using search, so I'll try my luck by asking.

  First of all: I'm using Labwindows/CVI 8.5

  I created an installer for my application using the Distribution Kit Wizard. Under the tab drivers & components I chose only the 'standard Run-Time'.

  On the Advanced tab, I left the option "Install Labwindos/CVI Run-Time Engine in the application directory" unchecked.

  This installs and works fine at my PC clients.

  Now the problem:

  My client does not want that all files are installed in the Windows\System32 directory...

  So I checked the option "Install Labwindos/CVI Run-Time Engine in the application directory" and created a new installation routine.

  This installs fine and the cvirte folder is also be copied into the directory of the specified program and not Windows\System32... but now whenever my client tries to run the application, it gets called with the following messagebox:

  Cannot find the directory RTE:

  C:\Windows\system32\cvirte

  Which is actually very good, because I wanted to RTE must be installed in the folder of my program, but somehow my request is always pointed toward the search in system32.

  Is there a way to fix this without copying the RTE in Windows\System32 again?

  Given your explanation, I can understand why you see the error message. When you try to locate the resource (bin) and directories of fonts, DLL RTE search in the directory of the process that loaded, then in the system directory. As RTÉ is not installed in one of these locations (instead, it is installed in the same directory as your DLL file), we do not find the directory "RTE". There is nothing particularly wrong with what you're trying to do, except that we can't do well. I'll drop a request to fix this for a future version. In the meantime, you have a few options:

  1. let the RTE to install in the system directory, as it normally would.

  2. manually copy the directory cvirte of your repertoire of the DLL in the system directory.

  3. ask the client install your package DLL in its application directory. The target directory can be changed by the customer at the time of installation.

  I know these aren't the major options. I personally highly recommend the first option, despite protests from your customer. Is there a good reason that it is forbidden to use the system directory?

  A. Mert

  National Instruments

• Save the file without the application of effects?

  Forgive me if it's dense - my first experience with audio with soundbooth CS5 was so am new and now relearning with hearing.

  If I have audio charge up and I handle the effects to try to get perfect results, it seems that I can't save what I'm doing and come back later? If I close or save the file without applying the effects on the grid, they all disappear.

  It's just mind-boggling because all other programs Adobe Photoshop, After Effects, first, etc allow you to configure effects, save, open, and reconfigure.

  Knowing that I can assume I am doing something wrong because this simply makes the hearing as a musket - do or die right now, otherwise start again - and I know what that is impossible.

  What am I missing?

  TIA

  Paul

  Well Yes, that's all.

  Change display is for destructive processes that modify the file for good, whether they are physically cut the file or the application of permanent changes.

  View Multtrack's mixes real-time and process that can be used to do what you have the final product without changing the file.  As long as you save the Session that you use, all your changes are retained for the next time that you open it, but the track itself is unchanged... and when you're done, you mix your session (even if only a trace) to a new file that contains all of your effects.

  In defence of Adobe, this way of working is logically to anyone who comes to the hearing of the sound aspect.  Change the workflow to match Photoshop or whatever it would probably result in loud home audio guys (who, until this version, were 99.9% of the user base).  Even when I was doing audio post production for television (a Soundstation DAR and then with the formidable Protools) it was the kind of workflow I was used.

  I hope this helps.

• Can .air install some files with the application?

  I have an installer.air created by Adobe Flash. I have another file called settings.cfg that is necessary for my application from running. How to let the computer auto install settings.cfg in installation as well as the application directory when I run installer.air? Currently, I need to manually place the settings.cfg in the directory of the installed application.

  Click your appliction settings/general edit button and add the included files.

• an error occurred trying to rename a file in the destination directory code 5

  When I try the installed software on this time its error getting
  ; an error occurred trying to rename a file in the destination directory code 5

  Hi Sissi,

  1. What is the full error message do you get?

  2. This only happens when you try to install a particular program?

  3. using the administrator account?

  Step 1:

  You can try to take ownership of the file or the folder and check.

  How to capture a file or a folder in Windows

  Step 2:

  I also suggest you temporarily disable the antivirus software third and firewall on the computer and check to see if that fixes the problem.

  If disabling the antivirus software solves the problem, you may need to configure the settings of the antivirus as a result program. Please contact the software vendor for assistance in this regard.

  Note: Make sure that you enable the antivirus software, other security and firewall after the test programs.

• BlackBerry App World Smartphones gives files of the application of the old version of whatsapp

  Hello

  First of all...

  • Your carrier-> OF Vodafone
  • Your BlackBerry model-> Bold 9700
  • Your BlackBerry OS (can be found in the Options->)-> v5.0.0.545
  • Version of App World (can be found by going to Options-> Advanced-> Applications)-> v1.1.0.33
  • If you have BIS or BES (personal use or business use)-> BES

  I bought Whatsapp about 2-3 weeks - at this point Whatsapp performed v2.1.

  A few days ago I resetet my camera (there were some problems with the connection to BIS) and wanted to install whatsapp worldwide app - download worked and everything has been installed very well - but app world give me the files to v2.0.1 but claims to be v2.2 - so whatsapp couldn't initial step correctly and does not work!

  I've already sent with the support of whatsapp and they say that it is a bug in the app world.

  Support WhatsApp: "Yes, it's a bug of AppWorld. He gives files of the application of the old version, but claims that it is the new version. »

  also take a look at these screenshots:

  http://www.lcd0711.de/Capture1.jpg

  http://www.lcd0711.de/Capture2.jpg

  Someone has any idea how to fix this?

  thanking you in anticipation

  Everyone - please read my response above. There is no formal AppWorld press here - zero. If the developer of the app wants to have users try to introduce the issue with RIM, only channel users to do so is through your official support - which is provided by your operator.

  Good luck.

• Media Encoder CC 2015.3 missing files during the export

  Hi guys,.

  After the upgrade to 2015.3, I've noticed on several PP exports to ME that sometimes a video clip will not export.  It will happen every time, lack the same clip or two with a certain sequence, and when I export directly from PP, the clip will be in the final export.  If anyone has experienced this type of problem, and someone at - it other than just export directly from PP solutions?  Thank you.

  Double post, please see the original post here:

  Media Encoder CC 2015.3 missing files during the export

  Thank you

  Ilyes Singh

• How to *. ZIP has *. CSV file in the Oracle Directory?

  Hello! How are you doing guys?

  I have a question;

  How to Zip, a CSV file in the oracle directory?

  I use this method, but a mistake;

  Error; Invalid file operation, this line: utl_file.get_raw (v_arquivo_out, strbufferdd);

  ___The Script___

  v_arquivo_out: = utl_file.fopen ('ORA_DIR',-/ oracle/files/ORA/ORADIR /)

  "DOC. CSV', - file name

  "WORLD BANK");

  UTL_FILE.get_raw (v_arquivo_out, strbufferdd);  <-this line a mistake.

  strbufferdd: = UTL_COMPRESS.lz_compress (strbufferdd, 6);

  V_SDIRECTORY: = TO_CHAR (SYSDATE, ' DD_MM_YYYY_HH24.MI.) SS') | "_RETORNA. ZIP';

  psDsc_File: = v_sDirectory;

  v_arquivo_out2: = utl_file.fopen ('ORA_DIR',-/ oracle/files/ORA/ORADIR /)

  psDsc_File,

  'W');

  -as_zip.

  Utl_File.Put_Raw (v_arquivo_out2, strbufferdd);

  UTL_FILE.fclose (v_arquivo_out);

  UTL_FILE.fclose (v_arquivo_out2);

  ___End SCRIPT___

  Help me?

  Thank you to all the world, I have the solution;

  Please see the procedure;

  CREATE OR REPLACE PROCEDURE 'PR_RELAT_CSV '.

  (

  peCod_Prog in DOCUMENT. Type of Cod_Prog %,

  psDsc_File out varchar2

  )

  IS

  -variaveis para land

  v_arquivo_out utl_file.file_type;

  v_separator varchar2 (1): = "";

  v_sDirectory varchar2 (200);

  src_file BFILE.

  v_content BLOB;

  v_blob_len INTEGER.

  v_file UTL_FILE.file_type;

  v_buffer RAW (32767).

  v_amount directory: = 32767;

  v_pos INTEGER: = 1;

  BEGIN

  -DADOS PREENCHIDOS. ABAIXO, CRIAR PREENCHER E O LAND CSV

  V_SDIRECTORY: = TO_CHAR (SYSDATE, ' DD_MM_YYYY_HH24.MI.) SS') |

  ' _RETORNA. CSV';

  psDsc_File: = v_sDirectory;

  v_arquivo_out: = utl_file.fopen ('ORA_DIR',-/ oracle/files/oradir/ora /)

  psDsc_File,

  'W');

  cabecalho - write

  UTL_FILE.put_line (v_arquivo_out,

  "Organize" | v_separator | ' OPTIONS / Options'.

  v_separator | "AP" | v_separator | "CODE" |

  v_separator | 'Description of the PN | v_separator |

  "Station". v_separator | "Initial SN | v_separator |

  "Final SN | v_separator | 'Note ' | v_separator |

  'Pos ' | v_separator,

  (FALSE);

  -write linhas

  / * n : = 0 ; Contador * /.

  for rec_ (SELECT DISTINCT a.*, d.DSC_ITEM, e.COD_PN_MAT

  OF pcm_subestacao one

  LEFT JOIN (select b.cod_prog,

  c.num_arj,

  c.cod_itens,

  c.DSC_ITEM,

  c.COD_SEST_CONJ

  of pcm_desenho b

  INNER JOIN TABLE (fu_pcm_Combinar_Subestacao ('SYSTEM', b.cod_prog, b.num_arj, 0, null, null, null,)) c

  ON b.num_arj = c.num_arj

  and b.cod_prog = peCod_Prog) d

  ON a.cod_sest_conj = d.cod_sest_conj

  INNER JOIN pcm_mat_geral e

  ON e.cod_cemb_mat = a.cod_cemb_estc

  WHERE a.cod_prog = peCod_Prog

  loop of the order of a.num_arj, num_ns_i, num_ns_fn)

  / * n : = n + 1 ; Contador linhas * /.

  UTL_FILE.put_line (v_arquivo_out,

  Chr (34) | Chr (32) | rec_. NUM_ARJ | Chr (32) |

  Chr (34) | v_separator | Chr (34) | Chr (32) |

  rec_. DSC_ITEM | Chr (32) | Chr (34) | v_separator |

  Chr (34) | Chr (32) | rec_. COD_PN_SEST | Chr (32) |

  Chr (34) | v_separator | Chr (34) | Chr (32) |

  rec_. COD_CEMB_SEST | Chr (32) | Chr (34) |

  v_separator | Chr (34) | Chr (32) | rec_. DSC_PN_SEST |

  Chr (32) | Chr (34) | v_separator | Chr (34) |

  Chr (32) | rec_. COD_PN_MAT | Chr (32) | Chr (34) |

  v_separator | Chr (34) | Chr (32) | rec_. NUM_NS_I |

  Chr (32) | Chr (34) | v_separator | Chr (34) |

  Chr (32) | rec_. NUM_NS_FN | Chr (32) | Chr (34) |

  v_separator | Chr (34) | Chr (32) | rec_. DSC_OBS |

  Chr (32) | Chr (34) | v_separator | Chr (34) |

  Chr (32) | rec_. IND_POS | Chr (32) | Chr (34) |

  v_separator,

  (FALSE);

  end loop;

  UTL_FILE.fclose (v_arquivo_out);

  src_file: = BFILENAME ('ORA_DIR', psDsc_File);

  DBMS_LOB. FileOpen (src_file, dbms_lob.file_readonly);

  v_content: = utl_compress.lz_compress (src_file);

  v_blob_len: = DBMS_LOB.getlength (v_content);

  V_SDIRECTORY: = TO_CHAR (SYSDATE, ' DD_MM_YYYY_HH24.MI.) SS') |

  ' _RETORNA. CSV. ZIP';

  psDsc_File: = v_sDirectory;

  v_file: = utl_file.fopen ('ORA_DIR',-/ oracle/files/ORADIR/ORA /)

  psDsc_File,

  "WORLD BANK");

  Everything v_pos< v_blob_len="">

  DBMS_LOB. READ (v_content, v_amount, v_pos, v_buffer);

  UTL_FILE.put_raw (v_file, v_buffer, TRUE);

  v_pos: = v_pos + v_amount;

  END LOOP;

  UTL_FILE.fclose (v_file);

  EXCEPTION

  WHILE OTHERS THEN

  IF UTL_FILE.is_open (v_file) THEN

  UTL_FILE.fclose (v_file);

  END IF;

  LIFT;

  END PR_RELAT_CSV;

• Illustrator crashes when saving files in the default directory not in Mac OS 10.10 or OS 10.11. What is the solution?

  Illustrator crashes when saving files in the default directory not in Mac OS 10.10 or OS 10.11. What is the solution?

  There is no solution.

  If that is your only question, you should be happy.

  El Capitan Yosemite and CS5 are not compatible. For some people it can run more or less, for others not so much.