Files opened in the OneNote notebook

Similar Questions

• All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work.

  Original title:. Nothing works.

  All my .exe files have been removed. as well as system32\rundll32.exe... How can they be retrieved when no file opens and the system restore will not work. I can't install a fixit program or run anything at all.

  Safe mode?

  Looks like you have a virus/trojan/worm infection pretty good...

  Actually, even if you get executables run again - you can be (read as "will be") better off the coast of a new facility.  Wipe and install media with your product key and other serial numbers and installation for other products media you own and restore your last recognized reliable backup for your files.

• Is it possible to have TWO Wordpad files open at the same time?

  It is possible to have TWO working Wordpad files open at the same time?  I tried 'cutting' nothing doesn't.  With Windows XP, it wasn't a problem...

  Thank you...

  Totally forgot the thing to-do bar, you can also a way to click on it to open a new

• When my raw files open in the original window in Ps, they are simply yellow, when I click on open a picture, they open up fine, but I miss the initial settings of type Lr. This happens to my raw files in Lr I used a Nikon 5300 and a Panasonic TZ

  When my raw files open in the original window in Ps, they are simply yellow, when I click on open a picture, they open up fine, but I miss the initial settings of type Lr. This happens to my raw files in Lr I used a Nikon 5300 and a Panasonic TZ60.

  Hi ericv,.

  For Photoshop (Camera raw): -.

  1 > Open Photoshop

  2 > click on Edit > Preferences > Camera Raw

  3 > please uncheck CPU graph using.

  

  4 > then click on OK.

  5 > restart Photoshop and check

  For Lightroom: -.

  Please go to preference > Performance > uncheck "use graphics processor.

  

  Let us know if that helps.

  Kind regards

  Assani

• I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

  I can't have multiple files open at the same time! I need to compare the content from one to the other. How to display two files at the same time?

  Hi sindres79946597,

  Open Acrobat Reader DC, navigate to the Edit-> Preferences-> General-> uncheck "Open Documents in the new tab in the same window.

  Now, reboot your system, when you open multiple PDFs that all will open in a new window so that you can easily compare.

  Kind regards
  Nicos

• GlassFish > view log file opens in the editor instead of the console

  How to reproduce:

  1. Open the view servers and make up the context menu for a GlassFish Server
  2. Select GlassFish > view log file

  Real: The log file is open in an editor. Whenever the file is changed, a popup appears asking if the content needs to be recharged (unusable)

  Expected: Log file opens in the console and provides the usual and reloading or scrolling behavior

  Eclipse: 4.3.0 (Kepler) (Platform 4.3.0.I20130605 - 2000)

  GlassFish tools: 6.0.3.201306271729

  The question is: this bug can it please be corrected?

  Hello

  Please update to the latest version of EPCO 12.1.2.0.0. This question has been address in this version.

  http://www.Oracle.com/technetwork/developer-tools/Eclipse/downloads/index.html

  Thank you

  REDA

• can't have 2 files open at the same time PS? !!

  I just upgraded to cs3 to cs6.  I open a file photoshop very well, then I click on another PS file so that I can drag a layer from one to the other.  but when I click the second file it opens - but it closes the first file!  This cant be right.  How to make 2 ps files open at the same time?

  User error.

  Just acheck "Documents open as tabs" in Photoshop preferences.

• Why attached used pps files opened after the latest Automatic update of the ie8?

  Attn: Microsoft Brainiacs; IT IS VERY ANNOYING!
  attached pps files won't open if clicked in outlook express/ie8 after automatic update more recent.
  When I try to open files pps attached, this is what I get.
  a box with a red x will appear and this is the message;
  "this file has no program associated with it for performing this action.
  Create an association in the FOLDER OPTIONS Control Panel."
   
  Before the automatic update, this function worked fine.
  Also, the association for pps files is still there in the Folder Options Control Panel.
  and more if I save the pps file attached somewhere / anywhere and then click on it, it opens fine.
  .. This failure to launch opening pps files attached, that happened after the latest Automatic update,
  .. just one more why people hate automatic updates or updates of any kind.
  like the previous functions of work suddenly and inexplicapbly no longer work after the update took place!
  So what's the cure for this annoying problem?
  E-mail address is removed from the privacy *.

  I have XP SP2 and PPS PPViewer 7 NOT VISTA
   
  That's what my watch key

  HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
   
  not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
   
  I also tried renaming it as shown below, and it will not let me NOW WHAT?
   
  where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
   
  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

    Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files PPS (Microsoft PowerPoint slide show)

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

  For. PPT (Microsoft PowerPoint Presentation) files

  • Click Start, type regedit.exe and press ENTER
  • Navigate to the following branch:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  • Click view , and then click Rename
  • Type the word Open so that the show is replaced with the Open command
  • If you have the PowerPoint 2007 Viewer is installed, repeat the steps above in this key, thus:

  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  • After having changed from Show to Open, close the Registry Editor window.

    For more information, please click on the following link:

    http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

    For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

    I hope this helps. Let us know if you need help.

  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Why attached used pps files opened after the latest Automatic update of the ie8? I have XP SP2 and 7 PPViewer

  I have XP SP2 and PPS PPViewer 7 NOT VISTA
   
  That's what my watch key

  HKEY_CLASSES_ROOT\.pps\PowerPoint.slideshow.8
   
  not HKEY_CLASSES_ROOT\PowerPointViewer.SlideShow.11\shell\Show
   
  also I tried to rename it as shown below, and it won't let me NOW WHAT?
   
  where can I find IE7 to down load? all I see on the web and the site of MS is downloads for IE8
   
  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files (Microsoft's PowerPoint slideshow) PPS

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  After the change of show to open, close the Registry Editor window.
  For. PPT (Microsoft PowerPoint's presentation) files

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  After the change of show to open, close the Registry Editor window.

  For more information, please click on the following link:

  http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

  For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

  I hope this helps. Let us know if you need help.

  Hi wwollmuth,

  I'm not sure from your post what version of Vista you are using or if you use the Viewer for Powerpoint as opposed to full Powerpoint (2003 or 2007?), but I can try to give you help to fix.

  For. Files (Microsoft's PowerPoint slideshow) PPS

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.slideshow.12\shell\Show

  After the change of show to open, close the Registry Editor window.
  For. PPT (Microsoft PowerPoint's presentation) files

  Click Start, type regedit.exe and press ENTER
  Navigate to the following branch:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.11\shell\Show

  Click view, and then click Rename
  Type the Word Open before the Show is replaced by the command open
  If you have PowerPoint Viewer 2007 is installed, repeat the steps above in this key, thus:
  HKEY_CLASSES_ROOT\PowerPointViewer.show.12\shell\Show

  After the change of show to open, close the Registry Editor window.

  For more information, please click on the following link:

  http://www.Winhelponline.com/articles/149/1/Unable-to-open-PPS-attachments-directly-from-Windows-mail-in-Windows-Vista.html

  For now, the only 'solution' which is known to 'cure' this problem is to uninstall IE8 and go back to IE7.

  I hope this helps. Let us know if you need help.

  --------------------------------------------------------------------------------
  Dave D
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  Hello

  This forum is for Windows Vista updated Threads. Please post here:

  http://www.Microsoft.com/windowsxp/expertzone/newsgroups/reader.mspx?DG=Microsoft.public.windowsupdate&lang=en&CR=us

  Thank you for your visit,

  Rick

• How can I make my files open with the section 'files' (on the left) already enabled (in Windows Explorer)?

  I'm on Windows XP with Service Pack 4.  The "show common tasks in folders" checked in folder options and my windows Explorer opens with the "common tasks" bar on the left side.  I have to click on 'files' (in the top tool bar) to get my files to display on the left.  If I click on "use Windows classic folders" instead of "Show common tasks in folders" my explore opens with no left bar at all and I still click on 'files' to have folders appear in the position of the left side bar.  Can I solve this case everytime I open windows Explorer opens on the side bar of folders on the left and content on the right?  If Yes, where and how do the default every time I open windows Explorer?  Thanks for any help, that all the world can offer.

  Thank you very much.  This has not only had what I wanted, but also extend this ability to any file folder I click on.  What I was really doing was: I saved a link to a set of "my computer" window microsoft explore my d: drive (my data partition) so it automatically goes to what I look at in explore more often rather than having open 'my computer' and go through several steps to get to the open D: partition.  But I still had to push the button of "folders" at the top of the page to open the view in the left bar of my directories - every time.  With your help my link now opens windows Explorer set up exactly the way I want every time!  You have saved me from countless steps repetative in the future for every time I open windows Explorer.

  Thank you once again,
  David Myers

• Fuse will not music files open in the converter

  I am trying to add music to my fuse, but I can't open any file of music in the converter, I tried to drag and drop, and that does not work either.  This is what happens, I connect my fuse to my PC open the converter and works even if there to get my music - when I open the file - it is empty! I always receive my pix and videos... I deleted the re-uploaded load software and still does not work!

  Can someone help me please?

  TIA

  You don't need to run your music through what I guess is Sansa Media Converter. Just videos and photos. Adding your music can be done in two ways,

  1 open your rocket through my computer, and then in another open window the file with your music to find the files that you want to drag and drop them in the music folder.

  2 open Windows Media Player, or another similar program, and then use it to synchronize with your player

• Problem with the file opened in the application via InvokeRequest

  Hello

  my application opens the file and reads its binary content. I have a small problem to open a file from a navigation or an attachment.

  But first here's how my app works. I have a signal/slot-connection in my applicationUI constructor:

  ApplicationUI::ApplicationUI(bb::cascades::Application *app) : QObject(app), m_invokeManager(new bb::system::InvokeManager(this)) {
  
    bool ok;
  
    // Since the variable is not used in the app, this is added to avoid a
    // compiler warning.
    Q_UNUSED(ok);
  
    ok = QObject::connect(m_invokeManager, SIGNAL(invoked(const bb::system::InvokeRequest&)), this, SLOT(handleInvoke(const bb::system::InvokeRequest&)));
  
  }
  

  So if the user clicks on a file it can open in the following C++ function:

  void ApplicationUI::handleInvoke(const bb::system::InvokeRequest& request) {
  
      QString workingDir = QDir::currentPath();
  
  // Initiate the appropriate target based on the invoke.target-key
      if (request.target() == "com.myapp.card.previewer") {
  
          m_uri = request.uri().toString();
  
          QString FileToOpen = m_uri.replace(QString("file://"), QString(""));
  
          bb::cascades::Page* PageToOpen = ApplicationUI::doLoadPageDetails(FileToOpen);
  
          if (PageToOpen != NULL) {
              initPreviewerUI();
          } else {
              ShowToast("FEHLER! Seite kann nicht geladen werden");
          }
      }
  }
  

  The doLoadPageDetails () - function creates a page and filled with binary content of reading a file. If the file contains errors or is corrupted an exception is thrown.

  And here is my problem. When I opened a file corrupted first the screen becomes darker before opening the app. The I get error messages, exactly as I want. But the screen stays dark. I can't take another navigation element. Also, I can't use the back button. The only solution is to wipe the screen and then use the active frame to close the filebrowser and reopen it.

  That I can't use it with attachments to emails. When I open on and the screen is dark, I can't close the view for emails. So to see the mails again I have to restart the BB decive.

  I'm not fluent in English, but I hope you understand my problem. Is it possible to cancel the invokeRequest when the file is corrupted? Or what can I do here?

  Well, the solution was to use a Toast message but the dialog box. Because that prevents the application and I can't and shows just the message, with the button on this dialog box, I cannot tell the app to close.

• Adjust overall color of the process used in multiple files open at the same time?

  I often draw series of illustrations (maps) using the same overall color of the process and later to adjust the value of the color in all the files.

  In previous versions of Illustrator I just all the open files and adjust the color values in a single file and all other files automatically got the same values and could still be saved.

  This does not work in Illustrator CC 19.1.

  How to do this in a way effort now?

  Please tell the history of the ease of sharing 'lost in versions '.

  I asked at the start of the best technical sharing and setting/editing of uniform colors between multiple documents.

  We cannot link to a shared color palette and just edit this palette because the colour palettes apply only to the actual document when used.

  I tried a work-around, which probably works for my needs, is the attached illustration.

  I work with a set of four-color CMYK defined as Global colors, so I only need to adjust the CMYK values in the color chart to affect all the colors used in the document.

  But this only applies to the actual document and does not, when objects are copied/pasted between similar files.

  Instead, if I name the Global CMYK color chart (e.g.Pink) definition instead of simply use process values (0-70-20-0), give me a change to update a definition when copying objects between similar documents. If I choose "Merge swatches" in the dialog box "Swatch Conflict", the old 'Rose' (original) color will be updated to the new definition of the "Rose".

  This could be useful for others?

  

• The button file opens in the saving location, but does not open in the new location.

  I created a simple button that shows an error messeage: "error opening"url"when I test the movie, but play and opens in the browser after the publication. However, it will not open in the browser in a different location. I pasted the html code in a web page, but it does not work it or will open in the browser in a location of differnet from where it was originally published and recorded. Why is this?

  You have not provided anything whatsoever for anyone to check, except for the code of integration that you posted earlier.

• Can't see the different files open at the same time

  Hi all!

  I have this serious bug which is very difficult to describe... I'll use a picture to explain it better.

  Normally, it is possible to open different types of files on the same desktop and see them at the same time (such as writing on a file texedit during playback of a PDF one), but unfortunately whenever I click on the pdf file, the text disappears and vice versa (see figure 1 and 2 - in figure 2 the normal desktop would show two files not only one alone).

  

  

  This bug is not related only to these types of files... It also happens with files, images...

  I remember this strange behavior began after an update of Snow Leopard, continued after a clean installation of Lion and the following improvements (Maverik and, now, Yosemite).

  Accordingly, also mission control is affected as you can see on picture 3 (in the upper part, you should see two documents open, not one).

  

  I looked for a similar problem anywhere on the web, but I couldn't find any solution.

  Thank you all!

  Try going to your Preferences Library home folder and the removal of com.apple.dashboard.plist, com.apple.desktop.plist, com.apple.dock.plist files. It will recreate it.