Filter + a sustained loading APC cache

Similar Questions

• Question about the lazy loading the cache

  Hello

  First turn off please forgive my ignorance, this if my first time with a database that is put in cache.

  I'm trying to set up SQLFire so that it will be a cover for a traditional back-end RDBMS (p.6 that is applied on the RDBMS which will appear in the SQLFire cache).

  In the vFabric SQLFire user, Chapter 22 'Cache SQLFire strategies' Guide mentions that this can be done through deferred data loading into the cache. I do not understand completely how to set this up and I don't see any other details in the User Guide or anywhere else.

  Anyone would be able to point me to a more detailed explanation of lazy loading the cache (or be able to explain more)?

  Thank you.

  Hi, there are some problems with having obtained documentation out of sync from the GA version. Also based on your question, that I passed by this yesterday and hit a few challenges, so I wrote a blog post that shows how to use SQLFire for the caching of end to end. I hope it will be useful to you.

• Filter plugin not loaded every time

  Hello

  I'm writing a plug-in filter for Photoshop, but I'm having a problem and have found no idea what is the cause.

  My plugin is sometimes loaded by photoshop and sometimes not. When it is not the case, remove the 8bf file and do a rebuild of the project works, without changing anything in the code. Sometimes I have to rebuild several times until the plugin is loaded, which is annoying...

  First, I checked the version of the sdk in the file caviggia was correct: Version {(latestFilterVersion << 16) | latestFilterSubVersion}, the entry point is the same as in the example to dissolve.

  I thought that photoshop may cache of plugins to load more quickly and that the new version is not seen (like when I'm building several times per minute), but I figured out that when a plugin is loaded only once, he is always recognized.

  One thing I noticed is that when my plugin is loaded, if I go to help > System Info..., there is no version number for my plugin, which can cause the problem but I can't find in the dissolve example this version 13 origin. So, I thought that perhaps the resource is not compiled correctly sometimes but it's strange and unlikely I think (maybe still worth mentioning).

  Does anyone have an idea / suggestion? It's been 2 days that I try to understand what is happening and he starts to drive me crazy...

  Hello

  You develop for Windows or Mac?

  I had a similar problem with Windows.  I found that I was not compile the files correct pipl (my .rc file was not including the correct pipl files).  Tidy up/remove all pipl files and make sure that 100%, you are including the correct pipl files.

  I also had a problem when switching between 32/64-bit versions.  For example, when you compile a 64-bit plug-in, VS2010 would sometimes force a rebuild of the file caviggia (generate .pipl for 64-bit), and would include the pipl 32bits (rest of the 32-bit version).  This means that my plugin would not appear in 64-bit Photoshop (because the pipl was invalid).  For me the solution is to remove the old pipl files before compiling, either being aware of do a reconstruction of pipl files during the passage of 32/64 bit builds.  I could also have created pipl distinct generations for 32/64-bit and of course reason were included.

  When the plug-in does not appear in Photoshop, remove all obvious bits (for example, the plugin paths), watch your DLL exports, then check the pipl.  I don't think it's the version number, but someone with more experience than I can point you in a better direction.

  Jamie

• problem with tabs and filter the lines of memory cache

  Dear all I have a problem with the oaf page has two tabs under two of them consists of a table and add the button to the row. Second tab, it's a detail of the first tab, which means that each line in the first tab may refer to one or more lines in the second tab, my problem is when I add the line in the first tab and go to the second tab to add lines to this line of the display of the page added all lines not only the matching lines.

  my code:

  1 - controller

  When press Tab of Lot lines (partial action)
  If (goLotsTab".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}

  String trxLineId = "38";//row.getAttribute("TrxLineId").toString(); "
  AddLotParam serializable [] = {trxLineId};
  am.invokeMethod ("getTrxLot", addLotParam);
  }
  What press Add button lines of lots (partial action)
  If (addLot".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}
  String trxLineId = "38"; row.getAttribute("TrxLineId").toString ();
  AddLotParam serializable [] = {trxLineId};
  am.invokeMethod ("addTrxLot", addLotParam);
  }

  When press Add a tab line (partial action)
  If (addLine".equals (pageContext.getParameter (OAWebBeanConstants.EVENT_PARAM))) {" "}
  am.invokeMethod ("addLine", params);
  }

  Methods 2 - am

  public void getTrxLot (String pTrxLineId)
  {
  OAViewObject vo = (OAViewObject) getXXSiteLotsVO1 ();
  LinVo OAViewObject = (OAViewObject) getXXSiteLineVO2 ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
  pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  If (!) VO.isPreparedForExecution ())
  //{
  try {}
  String existringWhereClause = vo.getWhereClause ();
  vo.setWhereClauseParams (null);
  vo.setWhereClause("trx_line_id=:1");
  vo.setWhereClauseParam (0, (pTrxLineId) Number);
  vo.executeQuery ();
  vo.setWhereClauseParams (null);
  vo.setWhereClause (existringWhereClause);
  }
  catch (Exception exceptionl)
  {
  throw OAException.wrapperException (exceptionl);
  }

  // }
  following line is commented, but I think that it will contribute to the memory of the filter
  cached data to be mapped.

  Rank [] lotRows = vo.getFilteredRows ("TrxLineId1", pTrxLineId);
  }

  /////////////////////////////////////////////////////////////////
  public void addTrxLot (String pTrxLineId)
  {
  OAViewObject vo = (OAViewObject) getXXSiteLotsVO1 ();
  LinVo OAViewObject = (OAViewObject) getXXSiteLineVO2 ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");
  pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  If (vo.getFetchedRowCount () == 0) {}
  vo.setMaxFetchSize (0);
  // }

  VO. Last();
  VO. Next();
  Line = vo.createRow ();
  row.setAttribute ("TrxLineId", pTrxLineId);
  vo.insertRow (row);
  row.setNewRowState (Row.STATUS_INITIALIZED);
  }

  

  OK, I'll share my latest code using other

  public void createTransaction() {}

  OAViewObjectImpl vo = getXXSiteHeaderVO1();

  If (! vo.isPreparedForExecution ()) {}

  vo.executeQuery ();

  }

  If (vo.getFetchedRowCount () == 0)

  {

  vo.setMaxFetchSize (0);

  }

  String status = "incomplete."

  OADBTransaction txn = (OADBTransaction) getOADBTransaction ();

  • oracle.jbo.domain.Date currentDate = txn.getCurrentUserDate ();

  Line = vo.createRow ();

  row.setAttribute ("TrxStatus", status);

  1. row.setAttribute ("TrxDate", currentDate);

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

  {} public void addLine (String pTrxHeeaderId)

  OAViewObject vo = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  VO. Last();

  VO. Next();

  Line = vo.createRow ();

  int linNum = vo.getFetchedRowCount () + 1;

  row.setAttribute ("TrxHeaderId", pTrxHeeaderId);

  row.setAttribute ("LineNum", String.valueOf (linNum));

  row.setAttribute ("SelectLineFlag", "Y");

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

  Public Sub getTrxLot()

  {

  LinVo OAViewObject = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");

  String pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  linVo.setCurrentRow (linRow);

  OAViewObject vo = (OAViewObject) this.getXXSiteLineLotsVL1 () .getDestination ();

  }

  Public Sub addTrxLot()

  {

  LinVo OAViewObject = (OAViewObject) this.getXXSiteTrxVL1 () .getDestination ();

  Line linRow = linVo.getFirstFilteredRow ("SelectLineFlag", "Y");

  String pTrxLineId = linRow.getAttribute("TrxLineId").toString ();

  linVo.setCurrentRow (linRow);

  OAViewObject vo = (OAViewObject) this.getXXSiteLineLotsVL1 () .getDestination ();

  VO. Last();

  VO. Next();

  Line = vo.createRow ();

  row.setAttribute ("TrxLineId", pTrxLineId);

  row.setAttribute ("RowKey", new oracle.jbo.domain.Number (1));

  vo.insertRow (row);

  row.setNewRowState (Row.STATUS_INITIALIZED);

  }

• Force the browser to not load the cache js files

  Hi all

  I am familiar with the use of a query string to force the css and js files to be downloaded and not called cache (I hear it is not strictly a good way to address the issue).  However, I'm not sure a method to set this up inside Edge animate.  Certainly, I can see browsers not completely updated of changes made to the edgeActions.js file (and indeed all of the html files that she invites to add in the animation).  Forget to empty the browser cache took me out in my design process, but how can I be sure that the end user cares to the correct version of updates?  Clearly we cannot ask our customers to do this on every change to their project.

  I assume that there must be a way...?

  Thanks for your help.

  Joel

  Dear Joel

  I know two ways to prevent caching of files of your browser

  First: The Hard way

  Just add? + Math.Random () at the end of your file

  Like this:

  in HTML:

  instead of this line in HTML created by EA:

  ExpiresByType text/json "access plus 1 seconds".

  ExpiresByType text/plain "access plus 1 seconds".

  ExpiresDefault "access plus 1 month".

  You can type what ever type of file that you want to prevent caching in the browser

  Advantage: after this in your .htaccess file not cache all files with the type you want in your browser

  Easy does not appear there?

  Zaxist

• on the Startup Document error message: service Manager could not be started. Please check that filter Vault is loaded and executed.

  Is there a way to fix this?

  Hi ReyXimenes,

  1. did you of recent changes on the computer?

  2 when was the last time it was working fine?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Cache - database at the request of loading

  We implement a TRADE-CACHE that stores the TRADE_ID as key and a TRADE object as the value
  I have a question related to that.
  Currently, we load the cache with only 60 days of trades and rest of the trades are in the database. I use an implementation of dumps for this cache that will load data from database in the absence of cache.
  
  I have a module in the history of trade that retrieves trades from the cache and displays them in the grid.
  I can query the history of current trade in 60 days of cache using filters. But if I need to make requests for trades more than 60 days (for example 6 months before), so how should I do? Because the filter will not raise the load method of the dumps. And I don't know the TRADE_IDs in advance for these historic trades.
  
  Did someone come on something like that? I need to know how to design the cache to handle scenarios like this
  
  Thank you!

  .. query the db for the keys, and then use them to extract the data in the cache.

  It is a model that we see used quite often, especially for when all of the data is the database and as a part of this same series of data in the cache.

  Peace,

  Cameron Purdy | The Oracle coherence
  http://coherence.Oracle.com/

• CACHE PROBLEM: How to avoid the browsers to load the version of the old site?

  Hi, I am wondering how to avoid browsers to load a cache version o a Web site. Whenever make us changes and upload them via FTP directly from Muse, the only way to see the changes visualizes the site in a private browser tab or wait a few days to see the normal mode.

  Is there a possibility of adding metadata in the properties of the page (html for the head) or something to push the browser not to save versions of cache and refresh constantly?

  Maybe... what I have to delete in FilleZilla all content and load again to see the changes immediately or that does not work either?

  Thank you!

  We cannot control the behavior of the browser for end of fonts of the site for users accessing the site, but about the refresh of the page, you can add snippet of javascript for automatic page refresh.

  http://StackOverflow.com/questions/4644027/how-to-automatically-reload-a-page-after-a-give n period of inactivity

  http://StackOverflow.com/questions/19807665/auto-refresh-for-every-5-mins

  Thank you

  Sanjit

• Loads PHP vars loading cache

  Hello

  I have a program that loads the PHP variables.  At the end of the day, I will be responsible for producing the PHP but I have to be sure that the flash load variables.  In my own tests using a simple PHP file, once the variables are laoded, subsequent changes to the variables don't have not recorded until I cleared my cahce.  I was leading these test on my local server so maybe that is not a question online.

  But if anyone has any knowledge about this or knows how to make sure new variables are loaded each time the flash application to load PHP, I'd be gateful for the information.

  Best,

  Chris

  If you asssign a random variable to the url string for the php file it does not load the cache... something like...

  var fileToLoad: String ="http://www.domain.com/yourData.php?nocache=" + Math.Random ();

• Help! Mysterious exception during load tests (call on a cache item)

  Under load, we are witnessing the track below: DistributedCache$ BinaryMap.onMissingStorage is thrown an exception.
  
  We do:
  o = nc.invoke (cacheKey, proc);
  
  If the key exists in the cache (it's a control block that is reused over and over).
  
  It started just show up under load.
  
  Anyone know what this means?
  
  ----
  
  Configuration: 2 storage nodes, 15 client and JMX nodes, each node storage on its own machines, other nodes distributed on 4 machines.
  
  -Follow-up of the newspaper:
  
  
  java.lang.RuntimeException: Service ended
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.onMissingStorage (DistributedCache.CDB:9)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.ensureRequestTarget (DistributedCache.CDB:34)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ BinaryMap.invoke (DistributedCache.CDB:20)
  to com.tangosol.util.ConverterCollections$ ConverterInvocableMap.invoke (ConverterCollections.java:2110)
  to com.tangosol.util.ConverterCollections$ ConverterNamedCache.invoke (ConverterCollections.java:2565)
  to com.tangosol.coherence.component.util.daemon.queueProcessor.service.grid.DistributedCache$ ViewMap.invoke (DistributedCache.CDB:11)
  at com.tangosol.coherence.component.util.SafeNamedCache.invoke(SafeNamedCache.CDB:1)
  at com.tangosol.net.cache.NearCache.invoke(NearCache.java:413)
  to ourstuff. MultiSeqCacheUtils.doEnqueueAndUnlock (MultiSeqCacheUtils.java:360)
  
  ...

  Hello

  Ideally, needs to see all newspapers to try to make specific decisions, but there seems to be enough to see in charge of the communication delays

  2010-03-10 06:50:15.830 [consistency] [WARNING] [Logger@9233091 3.4.1/407] [] 2010-03-10 06:50:15.821/10439.291 GE of consistency Oracle 3.4.1/407 (thread = PacketPublisher, Member = 14): * have experienced a delay of communication ms 16849 (GC distance likely) * member (Id = 10, Timestamp = 2010-03-08 03:12:04.382, Address = xxx.xxx.xxx.17:33392, MachineId = 27153,

  2010-03-10 17:10:00.488 [consistency] [WARNING] [Logger@9233091 3.4.1/407] [] 2010-03-10 17:10:00.361/47623.831 GE of consistency Oracle 3.4.1/407 (thread = PacketPublisher, Member = 14): experienced a delay of communication ms 12745 (GC distance likely) with members (Id = 10, Timestamp is 2010-03-08 03:12:04.382, Address = xxx.xxx.xxx.17:33392, MachineId = 27153, rental = site: yyy.yyy, xxx04, process:15007); 78 packets reprogrammed, PauseRate = 0.0015, threshold = 1250

  2010-03-10 17:37:55.879 [consistency] [WARNING] [Logger@9266502 3.4.1/407] [] 2010-03-10 17:37:55.879/49281.934 GE of consistency Oracle 3.4.1/407 (thread = PacketPublisher, Member = 17): timeout while offering a package; asking the confirmation of departure for Member (Id = 3, Timestamp = 2010-03-10 03:45:03.816, Address = xxx.xxx.xxx.16:33390, MachineId = 27152, rental = site: yyy.yyy, xxx03, process:22060)
  by the member set (size = 2, BitSetCount = 2
  Member (Id = 2, Timestamp = MachineId 16:57:00.681, Address = xxx.xxx.xxx.17:33389, 2010-03-07 = 27153, Location = site: yyy.yyy, xxx04, process:4977, Role = PegsRvcUswRvcUswAdapter)

  These initiated very long communication delays probably death detection logic. There are a few possibilities for the delay. GC is a likely scenario and would need more logging to confirm information. Often the pile is not big enough and JVM spends time trying to free the memory. This is a link to a control area which includes a section on the JVM tuning including GC Monitoring & Performance Tuning

  http://coherence.Oracle.com/display/COH35UG/performance+tuning

  Increase can help and is documented as follows:

  The maximum time one or more nodes can be insensitive before be removed from the cluster is configured using the
  subitem of and by default a minute for production configurations. This increases
  value will allow the cluster to wait longer for connectivity to return. The downside to increase this value, it can also take more time to handle the case where a single node has lost connectivity.

  There is also an entry in the forum with a nearly identical stack dump, the only exception is the use of 3.5 of coherence which introduced the function of guardian of coherence.

  Re: Command fails only under high load and cache APP store.

  In this case, the APP store is reported as a bottleneck and reducing the and the increase has helped reduce this bottleneck.

  Dave

• Bulk loading cached using dumps

  Hello
  I can load the values from table in my application at startup using dumps adapter. do we not have any method in the cache
  store.
  
  Thank you
  -Trapani

  Hi thiru,.

  If you know all the keys of the table must be loaded into the cache, then you simply issue a cache.getAll () keys into manageable pieces.

  If you do not know the key, then you will need to write an application of custom loader which acts as a cache client and updates the data in the cache.

  You must also notify the cache store in advance that it is a preload, there is NO need to rewrite the data in the DB. This can be done either by an attribute that is designated for this indicator in the value of the cache itself, or the cache store cannot read a specific key replicated a cache to see if the phase preload is ongoing or not.

  Also, please see the following page:

  http://wiki.tangosol.com/display/COH34UG/pre-loading+the+cache

  Best regards

  Robert

• Near Cache update

  We currently have a relative-cache with a Cache partitioned on the Cluster.
  It contains about 60K objects that are quite large (they take about 60ms to load).
  We load the objects into the Cache by using get (key) - the key is of type Long
  Periodically, the objects are changed in the cache, which causes they expire and be removed from the front NearCache.
  We do not want delay of 60ms when multi-threaded application next comes touch this object.
  
  Essense, we need a near cache that actively supports its working set in a State to date, instead of the current «refresh on demand» approach
  We are very sensitive to the need to minimize the number of block outputs network and latency.
  
  -We want all the benefits of a NearCache (we use HighUnits/expires/Invalidation etc.).
  NOTE: It is not possible to use a continuous Query Cache because the keys do not confirm a filter and are loaded on an ad hoc basis by key.
  
  There are two options for possible implementation:
  
  Plan has. When it receives an event to update the cache support, instead of immediately remove the key from the card before, it should re - ask the new value from the cache to support and update the map before with this new value. Insertions and deletions proceed as usual. This ensures uninterrupted access from the point of view of the customer.
  
  Plan B. They will say that it can leave the cache in an inconsistent state, while we await the new value (especially if it is done asynchronously). In this case, we can proceed to the removal of the key from the card before, in the expectation that it will be reinserted when we receive a new value. This can impact the customer with a delay, while we wait for the new value. However, the probability of such a lack of cache is rather small, unless the client requests the same keys very frequently and repeatedly. We can set up with occasional delays, but with the current implementation we incur a guaranteed period.
  
  (We could use a listener on the FrontMap and use a JavaThreadPoolExecutor that loaded the object by key).
  We might have a beforeUpdate on the FrontMap event, so that the value doesn't go away until we have had time to update (the old object is pretty good until we get the new value and better than a delay of 60ms)
  
  Published by: andrew.wilson on August 4, 2009 08:11

  Hi André,.

  I just wanted to share the results of our conversation in offline mode for the benefit of everyone following this thread.

  Jon Purdy
  Oracle

  "My main goal here is to avoid creating something that creates many questions (from complexity) it solves."

  I _think_ the best approach is probably to leave the near cache as it is currently and wrap an another "cache" around him (for get-only read-only access to the potentially stale data). Your application code must decide what cache for access, but I think it's a good thing that you should be explicitly recognizing the different models of competition (for example between a cache coherent and voluntarily reducing consistency in order to increase the availability of data). I think it would be better for this "cache" to actually expose a traditional CAD - ish interface (for example, something like PotentiallyStaleCustomersDAO.findByPrimaryKey (long key)) rather than the more generic NamedCache interface; in part because more implementation of some methods of the NamedCache interface will get very tricky due to the unique semantics involved here.

  Your DAO implementation must maintain a small card thread-safe internally. This map contains outdated values (exclusively) during the window between when an invalidation removes an element from the near cache, and when the prefetch sets a new value in the car. Your DOA will make a look-aside in this card, and if it finds a value will return that; otherwise, it will forward the request to the cache close.

  You will need to create a custom listener and register it on the near cache (not sure if you want on the cache close itself or only the card internal before).
  -On near cache "invalidate" send the 'old' value in the cache, DAO (he will be "reference") and send an asynchronous read-ahead task
  -On another near the cache removal, remove the value from the cache DAO (just ensure that the DAO is not implemented cache data that is not the cache near)

  Use the same task "Prefetch" providing for 'Plan B', but extend it to remove the item from the cache, DAO as soon as the call to "get" the near cache ends. This will result in a benign race condition if another thread asking the same key, but you can be sure that each "invalidation" will be matched by a corresponding 'prefetch', that will keep the own DAO cache (you can also do DAO to cache a local cache of limited size, if you want to, but that the size of it will be indirectly limited by the size of the cache close should not be necessary).

  If you really want the NamedCache interface, you can configure a local cache and specify a CacheLoader then wrap you this CacheLoader around the above search method and set an infinitesimal size / time (for example 1 input and 1 ms expiry) on the cache. However, I would avoid it as you expand your API and hide the semantics of the strange concurrency data. "And most of the NamedCache methods would be useless to you."

• FF 12.0 records the images of every webpage I visit my cache files. Is this a feature or a malware?

  12.0 FF is save images at the top of every Web page I visit in my profile cache folders.
  I'm on Mac OS X 10.6.8 build 10K 549, MacBook Intel Core 2 Duo 2 GHz, 1 GB RAM, 160 GB HD, and Intego VBX6, updates on a daily basis.
  In the Terminal, the command 'file' with the path to an image file, for example shows:
  .../Cache/7/63/DB1B8d01: PNG image, 201 x 127, 8-bit/color RGBA, non-interlaced
  If the images are small, someone might be able to see, for example, a user-entered credit card number!
  In the Finder, quick look shows each image at the top of each visited Web page, but for Web pages external loaded, it is an image of only the portion of the Web page of the window, not the toolbar of the window and the status bar.
  The images of Web pages are saved two seconds after the loading of the page (by look which, contrary to get information, watch the time updated, including the seconds).
  The problem occurs in Safe Mode even after a reboot.
  It is present in FF 12.0 at the level of the user account administrator and 12.0 FF running in standard user accounts.
  After saving my profile and remove the update 24/04/2012 installed 12.0 FF (from 11 FF) and download a new version today 04/29 http://mozilla.org/firefox (the cache was already deleted last session of FF), I tested it again, via the Help menu Firefox Help. The page loaded, and cache contained the normal icons of pages and images, AND a picture of the top of this Web page.
  The images do not match those used by tab groups, and those that are used when the tabs are moved around each other (by comparing images of shows they are not quite a).
  Keeping the width of the window go the same, but by pulling the bottom of the browser window, until only a few inches of the page is visible, the image to show only the upper left corner of the Web page.
  If the addons page is also open and another page is visited (when a new tab is created), a picture of the newly created page AND an image of the Add-ons is created also, but NOT the page, the user sees, but instead the Firefox window more old style with the color tab buttons gray in the toolbar list 4 tabs "Get Add - ons. ", Extension, themes, Plugins (which is depressed). In the toolbar of the window to the left are the three normal buttons, each gray, as if the window is inactive, then the Add-ons title, with the touch of the pill on the right. Here are some plugins that you have installed with the icons of blue lego block to the left and their related text, listed below in the rows. The top row is highlighted in yellow and that only the row has a button "disable." This image includes even a white background around the window. Yet this image does NOT match what the user displays, which matches the style full-page new modules, where the tabs are in a column on the left side and Add-ons are listed in the right column with a hardware button above, on a blue background.
  BTW: I just pasted the data of the troubleshooting information in the field below, but copy and paste does not show legs between preferred names and their values, or return characters, while everything works together.

  Which will probably not help.
  Firefox has coded a minimum of 50 MB for the cache.

  We put a lower limit of 50 MB and an upper limit of 1 GB.

  • http://MXR.Mozilla.org/Mozilla-central/source/NETWERK/cache/nsCacheService.cpp#569

  You can create a new pref Boolean browser.pagethumbnails.capturing_disabled on the topic: config page and set to true if you want to disable thumbnails altogether.

  • http://KB.mozillazine.org/about:config

• How to disable the cache of police presentation

  My computer takes 220 seconds to load the cache of police presentation.

  How can I get rid of this program?
  What do I lose when I uninstall it?
  Thanks - Mark

  Hello

  Method 1:

  PresentationFontCache.exe service is only useful if you use WPF (Windows Presentation Foundation) applications.

  If this is not the case, try the following steps:
  a. click Start type services.msc in the start search box.
  b. search for Windows Presentation Foundation do a right-click on the same service and disable the service.

  Method 2: Try these steps and check if it works:

  a. click on Start click on my computer.
  b. go to C:\Windows\ServiceProfiles\LocalService\AppData\Local\ delete all Font*.dat and restart the computer.

  You can also consult the vis with a similar problem and check if it helps.
  http://social.msdn.Microsoft.com/forums/en/WPF/thread/a2598b1a-3d96-4861-b7f1-f97c0e559581
   
  If you're still having problems with the police cover Windows Presentation you can post your request in the below forums.
  http://social.msdn.Microsoft.com/forums/en/WPF/threads

  Response so that we can better help you.

  I hope this helps!

• Agent cached job places

  Question: Web Sites is cached to the agent when you first load them.  Whenever I load a page that contains dynamic data, it loads the page caching first and don't update until my second 5 refresh interval.

  I want the agent to retrieve the page when it is called and not load the cached version.  Does anyone know if Cisco has a registry entry that controls this?  I found where it stores pages, but says that these pages are in use if I try to do something for auto remove them.

  Thanks in advance! -Bill

  Cisco Unified Contact Center Express 8.5

  Cisco Agent Desktop 8.5 (1) (Premium Version)

  Build: 8.5.1.214

  Post edited by: Bill Brown

  Hello

  as far as I know the CAD incorporates an Internet Explorer, so this is to Internet Options settings-, you can try caching for 0 days?

  In addition, if you control these web pages, you might want to try to send the appropriate response HTTP headers)

  Cache-Control: non-cache, non-magasin) or HTML meta tags (Expires, Cache-Control).

  G.