Filter aid AND

Similar Questions

• Hearing aids and this TV

  My Sony XBR55X850B arrived the other day, and this morning I tried to set up my sound.

  I wear hearing aids and have a gadget that puts the sound of television through my hearing aids.

  With my old Mitsubishi, I took the sound of my cable box from Cox and fed with a surround sound system and had no problem to have my hearing device plugged in at the same time.

  I tried to plug into the output of the hearing on the new TV and it works very well - but he cut the TV speakers

  DESIGN DECISION VERY POOR.

  I want to get rid of the sound surround (my owner complains it's too loud and hurt his ears even when put down path) and use the TV speakers.

  Since I have the camera for my hearing aids I can hear the TV fine and won't really miss the sound surround... much... good.

  But if I pull the sound of the hearing directly from the cable box there is a delay between the hearing and the sound of television. I hear my hearing aids until I hear the sound of the TV and it creates a terrible echo effect.

  UNUSABLE

  In the menu that I found, there only an option to use the speakers or an external audio system.

  Is it possible to use the internal TV speakers and the headphone jack at the same time?

  If I knew we couldn't do it I would not have bought this set. I hope that this can be and I have not fully understood how and some knowledgeable people here can show me how.

  I guess that, in desperation, that I could plug the sound surround until new which would induce a period equal to the TV... at least he did it with the old configuration there is no obvious response.

  But the receiver got dropped last year and now from time to time, I hear a noise like a large truck outside the House, but it is not a truck... it is the sound system. While I was looking for not to use.

  The headphone jack on the side of the TV has options in the main menu under preferences sound.

  In addition, the optical output on the back of the TV feed line, audio to your receiver level, without cutting the two-way speaker.

• When to use a DSL filter? And what is static on regular telphones?

  When to use a DSL filter? And what is static on regular telphones?

  'Computer' and voice communications through a telephone line active DSL work on different frequencies. However, there is often a frequency in these ranges overlap, that means DSL performance can be degraded and phone calls can suffer with audible interference. A DSL filter simply uses an electronic filter to keep things separate. To answer your question of when to use a DSL filter then it whenever the hardware and ordinary phones are used on the same LAN enabled phone line.

  Static on phone lines would just be crackling or other similar non desired audible signal interference.

• Filter paper and the Agents Web Monitor for Windows 2012

  Hi all

  We are being followed by a new requirement of filter paper and URLS to track for windows server 2012. From now on, we use foglight 5.6.4, but even in the more recent versions, I can see that these filter paper and WebMonitor agents support only Windows 2008. Could someone help me in this? What can be the workaround in the follow-up to this Windows Server 2012?

  Please suggest me as soon as POSSIBLE.

  Kind regards

  Shiva G

  Hello

  Just make sure we are not duplicate the effort on the same thread.

  There is a similar thread that has recently been opened which has had some answers

  http://en.community.Dell.com/TechCenter/performance-monitoring/Foglight-administrators/f/4788/t/19562461.aspx

  Golan

• Need to hide options "filter, search and list of exports.

  Hi, we can hide the filter, search and list export options in the user interface. Please see the summary below.

  

  You cannot change the user interface for existing objects of vSphere.

  You do not have your own list of objects in support of these options:

  -Sort and export icons will not be displayed if you specify no sortProperty or exportProperty in your list of ColumnDataSourceInfo.

  -The filter box will always be there but will be inactive if your data provider does not support a node PropertyConstraint with Comparator.TEXTUALLY_MATCHES (see example of frame-app)

• Filter effect and layer the layer in the same Style vs the separate layers

  I set a photographic image and uses both a filter effect and a layer style in the same layer to a smart object.  I want to separate the two effects in two layers, one layer has the effect of filter (Nik) and a layer is the layer style (Chromakey) (in order to merge/pixelation unmerged Nik filter effect with the smart object but keeping the layer style).  I can make two layers and move an effect without problem, but the Visual result of each effect on a separate layer is very different for these two effects in the same layer.   For all my layers blending Mode is Normal.  In the color overlay Panel, the blending mode is linear burn.

  I don't understand why the Visual result is different.  I'm not an advanced user of Photoshop, so maybe I'm missing something.  It is a trial of CS6 I use.

  Layer 1: layer style and a filter effect, stacked

  looks very different from...

  Layer 2: a layer style

  Layer 1: a filter effect

  If you want two separate layers, and then click the layer duplicated with the color overlay layer style you can try different layers, blend modes.

  For example, below is looking the same the Chromakey with linear burn on the second layer and change the blending mode of layers in Hue.

  

  You can also put the layer in a group and apply the layer for the group style.

  

  (I deleted the previous post because of the pilot error)

  Post edited by: R_Kelly

• quickly create with filter-date and initialize it with the current date

  Oracle BI 11 g
  
  Hello!
  
  I need to create guest of dashboard with filter-date and initialize it with the current date. How can I do?
  
  I tried to create the repository initialization block and add a variable. But I don't know what should I write to DataSource? I tried using the Current_Date, Now(), sysdate functions (for example, SELECT Now() FROM tbl_Calendar) but without results - when I pressed the button "Test"... "I have errors - something like 'Now() is unknown function' or 'incorrect syntax near keyword Current_Date.
  
  After that, I made to use presentation Variable in the command prompt, but also without success (())
  
  Please, help me.

  Use "Server Variable.

• Filter values and to_date interactive report

  Hello world

  I am trying to add a filter in an interactive report on a field that is defined in the query as follows:

  Select TO_CHAR (TO_DATE (comm. MONTHS, 'MM'), 'MONTH') AS 'MONTHS' from sometable

  Comm. month is a date field

  It works properly when it shows values, they have the name of the month.

  The problem is when I try a filter to aid 'to' article. I can see the different names of months in the drop-down list and I can add to the list of filters (i.e.: MAY, JUNE) but when I click on Apply I behaving strangely, as always by selecting all the lines or not if you select anything.

  Any idea? Oh, I'm using Apex 4.0.2 btw.

  Try it here: Page 1

• Problem of Bluetooth connectivity with Oticon hearing aids and 10 of the IOS.

  I use the Oticon Streamer Pro 1.3 to connect my hearing aids to my iPhone 6 more via bluetooth.  With the IOS 10 update the streamer keep disconnection, reconnection and disconnect.  I tried forgetting the device and once again pairing with the iPhone.

  Hi, Dick

  I have similar problems with my hearing aids Starkey.  iOS 10 broke the bluetooth.  I've been working with Apple, he's broken, no solution until the next update.  Incidentally 10.0.2 is not the solution

• Hearing aids and ios9.2

  RRecently updated my mini iPad 2 and iPhone 6 s.  Now I can no longer control my Kirkland Signature 6 hearing aids which are specifically designed to work with Apple products. They will pair to the top, but I can't control volumn or preset program.  I can control only streaming to the left or right and if streaming music or phone as well. Why Apple would remove this feature.  It was the main reason I bought the iPhone 6 s.

  Have you checked to see if their devices are compatible with the latest version of iOS with Kirkland? Discrete changes can be made in the iOS and as a result, device manufacturers have access to copies of beta from before the software to test their products to ensure that they still work with the latest iOS. Although this is not necessarily the question, I think that Kirkland would be able to better respond to your question here, since no one from Apple is here on the forum. This is a user to user forum. While no one here would know what Apple does or does not, speculation is forbidden, so I think that Kirkland would better solve your problem.

• Filter warning and ascii except error

  Hello

  I am the scene modal analysis using a hammer, the USB NI 9233 cRIO DAQ and the Sound and Vibration assistant. The steps were set in Signal on purpose as DAQ acquire-Trigger online-online-online-online FRF power spectrum filter => save in Ascii.

  I am facing two problems that I don't understand. Despite the selection of data for the record in the form of ascii file, it keeps giving me an error indicating that the data file must be selected. I chose the coherence of the filtered data, FRF, in Save as ascii steps separately. The filter also deliver me a warning that triggered data are not contiguous. What does that mean? I selected the option of continuous samples tab acquisition DAQ. I have to change something? I tried to use filters IIR and FIR, and it still shows the error that the Signal is not contiguous.

  Thank you.

  Hello StuMtu,

  Thanks for your post!

  To save it to ASCII file problem, I would say to make sure you have a path specified in the tab settings of the file backup at the file ASCII/LVM. See the attached picture. The warning you get on the data also, "contiguous" means that the information you send to the filter step are not a continuous time stamp data. I assume here that you send the 9233 release data to the filter step. So for example, if your event happens at 1 second intervals, then the data will filter is not continuous/contiguous. The data past the filter are continuous but timestamps fall just after the other. It's OK and its is not always filter your data but its just letting you know that your data is not continuous for each block of filtered data is not a consistent timestamp. Let us know if this clears up your problems or concerns and have a great day!

  See you soon!

  Corby_B

• The filter string and value some strin

  Hello!!! Alls

  I have a string code and I have messages and numbers, I want to filter in the chain, because I need graphic values

  Please help me!

  Thank you

  Hello

  If you have a string which you want digital data, you can use certain features of the range of the chain. For example, if you know the exact location of the numerica data in the string, you can use the String subset function (just specify the character in which we will start the research and the amount of characters to be read). Once you have the string, you can use the analysis of string function, which allows you to format the string to a numeric value that you can graph. I have attached the image of functions.

  

  You can find them in the channel Palette in the block diagram. If you want to know how they work, you can use help, by pressing Ctrl + H and by moving the mouse on the functions.

  I hope this is useful,

  Kind regards

• Filter ActiveAutoTextEditField and phone

  I have the following code for an ActiveAutoTextEditField with telephone line filter.

  ActiveAutoTextEditField befPhoneVal = new ActiveAutoTextEditField("","",20,BasicEditField.FILTER_PHONE);

  There is a problem with what the first push of button is always shown as alphabet and the next typing are correctly reported under the number.

  Please let me how can I add phone filter to the ActiveAutoTextEditField field.

  I tried to PhoneTextFilter, but the result is the same.

  Thanks for the reply.

  I used the following format to solve my problem.

  PhoneTextFilter (PhoneTextFilter.ACCEPT_CONTROL |) PhoneTextFilter.ACCEPT_FORMATTING | PhoneTextFilter.ACCEPT_EXTENSION);

• Where are the lines/margins of the Radial filter tools and Spot Removal?

  The lines/lines of the Radial filter and the spot removal tools have disappeared. What has gone wrong?

  I use Lightroom 5 and no update is necessary.

  Press the [H] key.

• Adjustment layer filter photo and dropper

  Hi all

  I'm sure there is a simple solution for this, but here (BTW I use a Windows 7 machine and a variety of versions of the PS).

  Someone showed me an interesting way to address dominant in the photos of the color, and it showed with my CS2. I tried at home on Photoshop CC, CS6 and CS5.5 with no joy. I then tried on CS2 (at home - so on the same machine with the other versions) and it worked as I showed.

  The method is as follows.

  Load the image that has a color cast.

  Select the adjustment layer and add an adjustment to the Photo layer

  Select "Color" rather than one of the predefined filters, and then click the color box to activate the eyedropper.

  Eye dropper using select part of the image that is closest to the distribution you want to delete

  Then in the 'a' and 'b' in the dialog boxes to do the numbers, the opposite of what they are (for example if the number is 32-32 change, if the number is - 32 change to 32).

  Then click OK to change the color.

  Then you should be able to use the density slider to increase or decrease the color cast.

  Now, it all works fine if I use CS2 - but if I try in CC, CS6 or CS5.5 when I try to use the pipette, I can't select all colors in my picture. No matter what I click on I get white, he's not going to look for the color.

  I'm sure I'm doing something wrong, but I can't for the life of me think what!

  Any ideas?

  See you soon

  John

  With the photo filter adjustment layer, hold down the Ctrl key while using the Eyedropper to sample the color