filtering data for temperature measurement

Similar Questions

• without using DAQ how a PID controller for temperature control

  Mr President.

  IAM trying to make a PID controller for temperature control in labview. But I have no devices data acquisition. Then without using DAQ how a PID controller.please suggest some useful block diagram.plz give me an answer. I tried one, but not working.below attached is my work.

  as a learning exercise, some devices can be simulated in the Explorer to measure (performance measure explore, right click on devices, select Create new.) Select simulated device and choose your device, you can search by product code for example 4070 for a dmm)

  I hope this helps you begin to learn labview, depending on how advanced you can I strongly suggest looking in training of core 2 and core 1 but also by looking at the examples that come with labview

• Satellite M70: access to the data of temperature and fan

  While we did not have these problems with other laptops, we found a way to access the data of temperature and fan on a Satellite M70.

  A friend has tried this on Linux but have failed and also with XP I do not find a way to read data (current temperature of the CPU, or State of the fan-cooler).

  Given that I noticed several irregularities when using (the fan is that the CPU load is very minimal), work sometimes is going to be a little uncomfortable.

  Thanks for the advice / gw

  I put t know if it will help you, but in this ad, someone managed to run a control application of the material.
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=14284

  Maybe it will work on your laptop.
  But to my knowledge Toshiba doesn't support this request and I'm not sure it will work.
  Anyway, try it's free ;)

• Data for the graph economy waveform

  Hello

  I'm trying to collect the data of temperature with the attached VI. Everything works fine until I open the exported file that contains only the last point of the chart. I already had this problem and I think that it is quite common, but I can't find how to solve it.

  Thank you very much for your help!

  Here's what you do.  The central loop is where you get several waveforms.  You want to write each waveform in the output file, which means you want the wave form to write to the worksheet in the Central loop.  Look at its inputs and outputs - put three of them, the file Path/New path, add to the file? and the header? on the shift registers.  Initialize (wants to say wire the register shift outside the While loop) the path of the file to "data\test" (as you've already done), with the new path towards the "output" Shift Register Terminal.  False (the default) of thread to add to the file? and true (if you want headers) to headers?  On the side of the "output" of these two SHIFT registers, wire to 'Add to the file?' "True" and "False" to "Headers?

  For the first time you run the intermediate loop, the file will be opened in a new file (since add to the file? is false) and a possibly written header.  All subsequent calls will add data in the same file (because you wired "True" to add to the file on the output terminal) and no header.

  And to get rid of the unnecessary frame at the end – data flow will be responsible for sequencing.

  Bob Schor

• Convert unequal sampled data dynamic XY data for use in other subVIs of signal processing

  Hello everyone. I wonder about this and have searched some topics of discussion, but all seem to point to do so, to re - sample the signal with the dt as low as possible. However, for me, I got the data using another instrument and its treatment and analysis using LabVIEW. Are there sub-VI/methods that can be used to convert a given without having to re - sampled or interpolated, XY train that is to maintain the measured signal and convert the pair in a dynamic type?

  Thank you

  If it is unevenly sampled he cannot be given dynamics.  Of course, you can keep a copy of the original data for later comparison, but you must resample or interpolation in a way to make any type of treatment that requires uniformly sampled data.

  Lynn

• CYC can be used for several measures thermocouple?

  Hello

  I intend to use a PCI 6221 with the SCB-68 to 3 temperature measurements (2 on a surface of copper that will be controlled at 40 ° C) and 1 for air at 20 ° C using thermocouples T and cold welding of the SCB-68 Compensation. From what I understand, once that the switches were properly set, AI0/AI8 are used by the CCM. So I have to use AI1/AI9 in differential mode for my first Thermocouple.

  (1) will be Thc n ° 2 and n ° 3 (respectively placed in AL10/AI2 and AI3/AI11) be Thc also compensated by CCM?

  (2) does anyone otherwise a kind of accuracy can I expect with thermocouple T + CJC allowance? Ideally, I would like to join a +/-0.2 ° C accuracy.

  Thank you very much

  User

  (1) will be Thc n ° 2 and n ° 3 (respectively placed in AL10/AI2 and AI3/AI11) be Thc also compensated by CCM?

  Yes

  (2) does anyone otherwise a kind of accuracy can I expect with thermocouple T + CJC allowance? Ideally, I would like to join a +/-0.2 ° C accuracy.

  First, take a look in the spec 6221.  in the CCM SCB - 68 spec and finally to the specification of the TC used.  Rough estimate: +-2 ° C without individual calibration.

  To meet the uncertainties of 0.2 ° C for type T TC (without the CJC and EMF meter) only you would need a calibration of liquid bath agitated the point of interest.

  0.2 ° C is for RTDS like Pt100...

• Dashboard of data for LabVIEW with ad-hoc wifi?

  Hello

  We have a laptop and we run a LabView control and acquisition of data on this subject program. We would like to have access to some of the values of the "indicators through an android tablet, so during an operation manual tap on our facilities, we could see remotely what happens with some measured values in our application LabView.

  The ethernet port is not available on this laptop, it is used for a sensor. It has wifi and bluetooth adapter. What would be the easiest solution to access the LabView app on this laptop from the Android device by using the "dashboard of data for LabView" android app? For security reasons, this laptop can't access internet, but of course, we could all just put a near wireless router (and not connect to the internet), and the laptop computer and the android Tablet access the same wifi network. I guess it should work, Yes?

  Or is it possible to make a connection to wifi ad-hoc between the laptop and the Tablet and use the DataDashboard? Anyone has any experience with such a solution?

  Last question: or what a Bluetooth connection? Might work?

  Thanks a lot for the tips!

  Kind regards

  Hi man,

  I recommend you connect your tablet as you described.
  _________

  |                   | ---> Network---> sensor cable

  | DAQ App |

  | Windows | ---> WiFi---> gateway---> Tablet

  |                   |

  ---------------

  I don't think that it is possible to use the Bluetooth with the application of the dashboard of data for Android. I can't find any information on Bluetooth, only for the WiFi.

  Best regards, Stephan

• Need help with the function or metric derivative to calculate percentages of threshold for a measure

  Hi, first post to the community that I am a n00b Foglight needing help.

  A thing (in fact the only thing) I like Microsoft SCOM is how this graph of the availability of a metric, and I want to do the same thing in Foglight. I understand that this could be a derived measure or a function, I need, but am a bit lost right now.

  Let's say I have a metric and created thresholds as follows: normal included 0, 50 inclusive, warning critical 75 inclusive, fatal 100 inclusive + 9999 included. The metric is measured every so often and more often (99%) of the time it's normal. I want to visually represent that fact, together with the percentage of time that he spends in the strips of quick, critical and fatal alert threshold.

  For the dashboard but mainly reports I am looking for the percentage of time that the metric through each of the bands of threshold and put them in some form of chart, preferably very similar to how SCOM it: -.

  

  I would also like to increase this visually with a quantification for the oriented numercally, in order to insert values in the report for clarification would be great too, for example:-Normal:-99% 0.5% warning critical Fatal 0.1% 0.4%

  I think of what I have already learned that we have to include a 'blue' band for threshold indefinite in order to operate on a regular basis for any measure.

  I do not seem to come up with this concept in Foglight but I think it could be very useful to have something. Any help is most appreciated.

  Health and alarms is a standard display which can be used on any object topology.  You can access it from the data browser and should also be able to specify this dashboard as a preference in personalized dashboards.

  

  Here it is in a custom dashboard:

  

• HOW TO SET THE TIME AND DATE FOR MALAGA SPAIN 29130

  TIME AND DATE FOR MALAGA SPAIN

  Hi Colin,

  Thanks for posting your query in Microsoft Community.

  • Are you referring to a zip code when you say 29130?

  I would refer to the procedure described in the article below to set the date and time in Windows 7.

  Change the display of dates, times, currencies, and measures

  You can also view: set the clock

  Hope this information is useful. Please feel free to answer in the case where you are facing in the future other problems with Windows.

• To display the year when no data for this line

  Hello
  
  I am trying to achieve more,
  
  When I "No Data" for my year, the year should be displayed in chart (line/Bar) with "Zero" as a measure. (currently it removes my year with data '0' ie. 2009)
  
  I have the following data:
  
  
  Sales Rev year
  2008 100 1000
  2009 0 0
  1500 150 2010
  1750 175 2011
  
  
  I tried following the advice of blogs... but I guess I could miss a step IMP.
  
  Any help is appreciated.
  
  Kind regards
  Jitendra

  Hello

  Try the implicit column

  http://OBIEE.nl/?tag=dimensional-modelling&paged=2

  Thank you
  deep

• Data for an empty value in a report formatting

  Hello world
  
  
  I've created a report of a region with four measure. In this report, I have no data for some areas. But still I want to display "Zero" instead of the empty value.
  
  
  Please any one help me for that matter.
  
  Scenario is:
  
  A B C D
  
  US 12 23 0
  UK 34 56 in white
  White Asian 67 67
  
  
  
  Concerning
  REDA

  Jin
  With the HELP of Filter (IFNULL(MEASURE_NAME,0) cal_month between ' 2009 - 04 - 01 00:00:00.000' and ' 00:00:00.000' 2009-12-01)

  If you found this useful award of points

  Thank you
  Angelique

• Unable to display data for the date where there is no entry in the table

  Hello
  
  I need a urgent, described below:
  
  I have a table named as 'dirty', consisting of three columns: empno, sale_amt and sale_date.
  (Please ref. The table with data script as shown below)
  
  Now, if I run the query:
  "select trunc (sale_date) sale_date, sum (sale_amt) total_sale of the sales group by order trunc (sale_date) by 1.
  It then displays the data for the dates there is an entry in this table. But it displays no data for the
  date in which there is no entry in this table.
  
  If you run the Table script with data in your schema, then u will see that there is no entry for the 28th. November 2009 in
  sales table. Now the above query displays data for the rest as his dates are in the table of the sale with the exception of 28. November 2009.
  But I need his presence in the result of the query with the value "sale_date' as '28. November 2009 "and that of"total_sale"as
  « 0 ».
  
  Y at - there no way to get the result I need?
  
  Please help as soon as POSSIBLE.
  
  Thanks in advance.
  
  Create the table script that contains data:
  ------------------------------------------
  
  CREATE TABLE SALE
  (
  NUMBER EMPNO,
  NUMBER OF SALE_AMT
  DATE OF SALE_DATE
  );
  TOGETHER TO DEFINE
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (DECEMBER 1, 2009 10:20:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 30, 2009 10:21:04 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 29, 2009 10:21:05 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 26, 2009 10:21:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (100, 1000, TO_DATE (NOVEMBER 25, 2009 10:21:07 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 5000, TO_DATE (NOVEMBER 27, 2009 10:23:06 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 4000, TO_DATE (NOVEMBER 29, 2009 10:23:08 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 3000, TO_DATE (NOVEMBER 24, 2009 10:23:09 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (200, 2000, TO_DATE (NOVEMBER 30, 2009 10:23:10 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 7000, TO_DATE (NOVEMBER 24, 2009 10:24:19 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 5000, TO_DATE (NOVEMBER 25, 2009 10:24:20 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 3000, TO_DATE (NOVEMBER 27, 2009 10:24:21 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 2000, TO_DATE (NOVEMBER 29, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  Insert into SALES
  (EMPNO, SALE_AMT, SALE_DATE)
  Values
  (300, 1000, TO_DATE (NOVEMBER 30, 2009 10:24:22 ',' DD/MM/YYYY HH24:MI:SS'));))
  COMMIT;
  
  Any help will be necessary for me
  
  
  Kind regards

  WITH tab AS
    (SELECT TRUNC(sale_date) sale_date,
      SUM(sale_amt) total_sale
       FROM sale
     GROUP BY TRUNC(sale_date)
     ORDER BY 1
    )
   SELECT sale_date,
    NVL(total_sale,0) total_sale
     FROM tab
     model
     REFERENCE refmodel ON (SELECT 1 indx, MAX(sale_date)-MIN(sale_date) AS daysdiff , MIN(sale_date) minsaledate FROM tab)
       dimension BY (indx)
       measures(daysdiff,minsaledate)
     main main_model
     dimension BY (sale_date)
     measures(total_sale)
     RULES upsert SEQUENTIAL ORDER ITERATE(1000) until (iteration_number>refmodel.daysdiff[1]-1)
     ( total_sale[refmodel.minsaledate[1]+iteration_number]=total_sale[cv()] )
  ORDER BY sale_date
  

  using a clause type

  Ravi Kumar

• How can I get the filtered data from the first form

  How can I get the filtered data from the first form in a second form to make an update of the multi.
  Thank you very much

  William,

  I would use for this collections. A link is good if you need to pass a single value.

  1. create a collection
  2 fill the collection with your result set
  3. go in the page target and uses a method of a query in your link to this page
  4. your target page receives a request and allows you to edit documents.

  Denes Kubicek
  -------------------------------------------------------------------
  http://deneskubicek.blogspot.com/
  http://www.Opal-consulting.de/training
  http://Apex.Oracle.com/pls/OTN/f?p=31517:1
  -------------------------------------------------------------------

• When can I know the delivery date for my Nike Apple Watch?

  IM just curious to know when I should know about the ship date for the new Nike Apple Watch. I just keep seeing end October for shipping. I'm just excited and cannot wait any longer to find out when I get there...

  Hello

  You will receive a shipment notification when your order has been shipped, and to access the tracking information.

  I'm afraid that no one here can tell you when it will be.

  It is a community of support based on the user.

  In the meantime, you can monitor your order status and date of delivery here:

  https://Secure1.store.Apple.com/order/list

• Cannot delete items in documents and data for each application

  I want to delete unnecessary files in several applications under general > use storage and iCloud > manage storage, but the section documents and data for the respective applications will not operate.

  I have it several times but it doesn't work.

  Can someone help me?

  Thanks in advance

  Omari says:

  I want to delete unnecessary files in several applications under general > use storage and iCloud > manage storage, but the section documents and data for the respective applications will not operate.

  I have it several times but it doesn't work.

  Explain what you do and what happens when you try to delete the data.