Computer starts up initially with a temporary connection
original title: prepare your desktop computer problem
After 1 year my laptop HP with Vista 64 bit, began "Preparing your desktop" during boot which creates a connection to temporatory. I stopped it, reboot and it my fine profile loading. This error occurs on all the 3 times I start up.
Hello
As a general rule, a temporary profile is created when the user profile has undergone a corruption. There is no way to repair a corrupted profile, the solution is to create a new old before becomes it completely unusable. What might happen in your case, is that repeated attempts lead to a restoration of previous versions of user files that quickly get corrupted again. Try to create a new profile and migrate your documents and files into it, see if it loads ok on a regular basis. If this isn't the case, then you can have a hard drive damaged in need of replacement. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org
Tags: Windows
Similar Questions
-
Captivate 7 starts no problem with a temporary file
Hello. It seems that I'm not the only one having a problem when you try to launch Captivate (7) (7, 64-bit) Windows. See other thread here:
Captivate used to launch without a hitch. Then I took a break in the program for a few months (could also have downloaded some Captivate 7 about Add-ons then too: App Packager, Quiz results Analyzer, reviewer).
Now when I try to open the program, my antivirus AVG says that one automatically generated "CP" file in user > AppData > Local > Temp folder has a 'unknown' moderate risk and should be removed. After that she did this, the Captivate launch window remains suspended until a dialog box asking if I want to force close.
If I scan with AVG Temp folder, he found no threat. I also scanned it with a Microsoft tool that has found no threat.
The file which seems to cause the problem seems to be generated at the time of the launch (so need the temporary Captivate file for the session, which would be naturally stored in Temp).
I can assume there is a compatibility problem with an update of the Windows 7 system. If everyone in the world with Windows 7 and 7 Captivate now has this problem, we can probably assume that this question.
I tried uninstalling and reinstalling Captivate (after ask Adobe if it would be ok, because I can not open the program to disable the first license). - But still have a problem after a new installation CD.
The Adobe Captivate team - is anyone following this topic? Comments would be appreciated because I don't know what to do next and need support.
@ Erik Lord, thank you, but it was not a question of AVG.
In the case where others facing this problem, I will describe my experience.
I had already tested the Captivate launch with the Temp folder excluded in AVG anti-virus (which is not ideal, because other viruses could find themselves there and not projected). That did not work. AVG has always presented the message.
I tried to temporarily disable all AVG (right click on icon in the toolbar View menu for this). That did not work. The program just hung.
A beautiful Adobe technical person remotely took control of my computer to make a diagnosis.
At the end of the day, it deleted all of my fonts (except system fonts that would not remove) and the program successfully launched after that. (I had installed recently many new policies - as well as brushes Photoshop, actions & bosses. Interestingly, the PS had been much slower to boot, which I thought was due to the new 'active', but I had not considered loading in Captivate fonts, as they would in most all other programs. It turns out that at least one of them had corrupted code.)
Unfortunately, I still have a small problem, but it is manageable until I have to remember Adobe. The Tech support guy had an account administrator to troubleshoot issues where Captivate launches beautifully. After I removed this connection (at startup) and just use my normal user account, Captivate has got the same message error AVG - but this time, not with the launch but a minute or so later. Also, when I said AVG to fix the problem, Captivate is not stopped and I could continue to work in it as usual. I would say that I need to go back and look at the fonts that were left, but at least it's type of work at the moment. This will not mark as resolved immediately in case there is more to add soon.
-
My computer starts slowly, infected with the virus. Microsoft Security does not work
Original title: keep the slow start
How do I remove trozens in the computor & to I have no few of them didn't have on this computor Microsoft Security Essentrials keep turning off as his red everrytime I restart the computorHello
If you need search malware here's my recommendations - they will allow you to
scrutiny and the withdrawal without ending up with a load of spyware programs running
resident who can cause as many questions as the malware and may be harder to detect as
the cause.No one program cannot be used to detect and remove any malware. Added that often easy
to detect malicious software often comes with a much harder to detect and remove the payload. Then
its best to be thorough than paying the high price later now too. Check with them to one
extreme overkill point and then run the cleaning only when you are sure that the system is clean.It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
the regular windows when you can.TDSSKiller.exe. - Download the desktop - so go ahead and right-click on it - RUN AS ADMIN
It will display all the infections in the report after you run - if it will not run changed the name of
TDSSKiller.exe to tdsskiller.com. If she finds something or not does not mean that you should not
check with the other methods below.
http://support.Kaspersky.com/viruses/solutions?QID=208280684Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/products/malwarebytes_freeSuperAntiSpyware Portable Scanner - free
http://www.SUPERAntiSpyware.com/portablescanner.HTML?tag=SAS_HOMEPAGERun the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with others
security programs. It is a single scanner, VERY EFFICIENT, if it finds something to come back
here or use Google to see how to remove.
http://www.prevx.com/ <-->
http://info.prevx.com/downloadcsi.asp <-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
-----------------------------------
Original version is now replaced by the Microsoft Safety Scanner
http://OneCare.live.com/site/en-us/default.htmMicrosoft safety scanner
http://www.Microsoft.com/security/scanner/en-us/default.aspx----------------------------------
http://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
After the removal of malicious programs:
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing
system files.Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
======================================
If necessary AFTER you are sure that the machine is clean of any malware. (DO NOT USE IF)
MALWARE IS STILL PRESENT).You can try a repair install or an upgrade in Place.
You can use another DVD that aren't copy protected but you you need to own
Product key. It must be the same version 32 or 64 BIT Vista OEM. Also the system
machine to usually sell the cheap disk since you already own Windows. Don't forget to make a
good backup or 3 (security in redundancy).On-site upgrade
http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htmThis tells you how to access the System Recovery Options and/or a Vista DVD
http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-consoleHow to perform a repair for Vista Installation
http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html=======================================
For extreme cases:
Norton Power Eraser - eliminates deeply embedded and difficult to remove crimeware
This traditional antivirus analysis does not always detect. Because the Norton Power Eraser
uses aggressive methods to detect these threats, there is a risk that it can select some
legitimate programs for removal. You should use this tool very carefully and only after
you have exhausted other options.
http://us.Norton.com/support/DIY/index.jsp================================
If you are in North America, you can call 866-727-2338 for virus and spyware help
infections. See http://www.microsoft.com/protect/support/default.mspx for more details. For
international information, see your subsidiary local Support site.I hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
my computer is the signature with a temporary profile and I can't access any of my files how to fix this?
Hello
Please post in the forums for your version of Windows.
Ask a question in a select Technical Forum here appropriate injector:
Microsoft Community - Forums
http://answers.Microsoft.com/en-usPlease provide all the information we need to help us help you.
How to ask a question
http://support.Microsoft.com/kb/555375=================================
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.
Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in
Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 - free methods system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty to a Vista - corrupted user profile
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profileDifficulty to a corrupt user - Windows 7 profile
http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profileI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
I'm having a problem with my wireless connection. I have to keep in with zero wireless configuration to connect to the internet almost whenever I start the computer. Usually, you must configure only once and his game, but I have to keep on my new Dell Precision 6400 reconfigure it. I use downgrade XP on vista.
Hi Susancav,
Welcome to Microsoft Windows Forums!
I'll be your message to the category of xp windows for a better answer. You can always find your message by going to my Threads in the section My Forum links at the top right of the page. http://www.Microsoft.com/windowsxp/expertzone/newsgroups.mspx
Thank you and best regards,
Bindu S - MICROSOFT SUPPORT
Visit our Microsoft answers feedback Forum and let us know what you think. -
I run Windows Vista. Recently on commissioning the first thing that appears on my screen is a 'Windows Live Mesh' message, "there could be a problem with your internet connection.
connection. Ensure that the computer is connected to the internet and try again".
My computer is connected to the internet, and it works very well. How can I get rid of this annoying message.
I tried all means to find this file on my computer, but it does not appear to be
Can you help me please
Mike Gray
Hello
Were there any changes (hardware or software) to the computer before the show?
Perform the check and the boot if the problem persists.
To help resolve the error and other messages, you can start Windows XP, Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
Note: Follow step 7 to reset the computer to start as usual after the boot process.
Hope that helps. -
Windows keeps connect me with a temporary account
I use windows vista and everytime I log in, I try to connect with my account that it connects me with a temporary. I tried a disconnection and rear connection, but the same thing happens. What should I do to stop this!
Hello
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).These problems and similar bugs can help:
Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215A temporary profile is loaded after you connect to a Windows Vista-based system
http://support.Microsoft.com/kb/947242How to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlSome programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.html-----------------------------------------------
Try these to erase corruption in the case where it plays a role.
1. run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
2. start - type in the search - box COMMAND find top - RIGHT CLICK – RUN AS ADMIN
sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/9282283. then run checkdisk - schedule it to run at next boot, then apply OK your way out, then restart.
How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------
Other methods:
Use the hidden administrator account to lower your user account (to the lowest level) APPLY/OK then go back
and reset it to the Admin APPLY/OK - this clearly allows corruption. Do this several times. Do the same for others
accounts that may be difficult. If necessary you can also reset your password in the accounts.
Do not forget to leave your Admin account and the other to the desired level.Make another Admin account with your password and use it to fix the others if necessary. (just for
repair, don't use regular account, not a safety valve) always keep a spare ADMIN account.DO NOT LEAVE THE ENABLED LSA OR USE DAILY. If it corrupts you are toast!
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlYou can run the Admin account hidden from the prompt by if necessary.
This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxIf you cannot access your old account, you can still use an Admin to migrate to another (do not forget to always
not that an Admin account that is not used except for testing and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">
-
"Your user profile was not loaded correctly! You have been connected with a temporary account.
Last night I shut down my computer like I usually do. Today when I woke up, I turned on the computer, entered my password, it took forever to load and then it was just a blue screen with a few icons. All my documents, pictures, music, etc. have disappeared and it's as if I use my computer for the first time. I immediately thought that I had a virus, ran a scan and nothing came. Then I checked my memory, and it's the same as last night, I felt a little hope that my files have to be somewhere. Did a system restore, but that did not help. I found the files when I clicked on "Start" then "search" then "c: / users I found everything, but don't know how to get back into that account." I am only connected under a temporary account. Help, please! I have no idea how to solve this problem!
Last night I shut down my computer like I usually do. Today when I woke up, I turned on the computer, entered my password, it took forever to load and then it was just a blue screen with a few icons. All my documents, pictures, music, etc. have disappeared and it's as if I use my computer for the first time. I immediately thought that I had a virus, ran a scan and nothing came. Then I checked my memory, and it's the same as last night, I felt a little hope that my files have to be somewhere. Did a system restore, but that did not help. I found the files when I clicked on "Start" then "search" then "c: / users I found everything, but don't know how to get back into that account." I am only connected under a temporary account. Help, please! I have no idea how to solve this problem!
Hey
Kimberly9701
Here are the tips from microsoft on a temporary profile loading
"Your user profile was not loaded correctly! You have been logged on with a temporary profile.
Changes to this profile will be lost when you log out. Please see the the event log for more information or contact your administrator. »
http://support.Microsoft.com/kb/947242
Walter, the time zone traveller
-
"you have been connected with a temporary profile.
I can't find the words to express the degree of anger with microsoft! I use W7 for a few weeks and just started getting the message "you have been connected with a temporary profile" and lost everything that was on my desk (shortcuts application, saved files and settings). I scoured internet (including MS help/support/etc.) and found the HUNDREADS of comments on this problem but with NOT a SINGLE solution that works and WITHOUT EXPLANATION of why or how it happened. This simple question is W7 TOTALLY USELESS and I'm trying to figure out how to recover my money on buying. If I could get my hands on the neck of the W7 developers, I'd be more than happy to squeeze the @$ % # out of them and they could keep my money. It's PATHETIC and a technology CRIME! All comments with a value of manufacturing?
Hello
Data is not lost and is accessible from any ADMIN including the hidden Admin account.
Check the C:\Users\Your user name.You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. The ADMIN account in trunk
Mode has no default password (unless someone has changed the password so it should be available).Some programs such as the updated Google (if you added the toolbar Google, Chrome or Google Earth)
has been known to cause this problem.Error message when you log on a Windows Vista-based or Windows 7 using computer a
Temporary profile: "the user profile Service has no logon. Unable to load the user profile.
http://support.Microsoft.com/kb/947215How to fix error "the user profile Service has no logon. User profile cannot be loaded. »
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have been connected with a
temporary profile. "in Vista
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
How to enable or disable the built-in Windows 7 Administrator account
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK and then lift it to ADMIN.
This allows clear of corruption. Do the same for other accounts if necessary after following the above message.You can use the hidden - administrator account to make another account as ADMINISTRATOR with password even
(or two with the same password) use a test or fix the other.You can run the Admin account hidden from the prompt by if necessary.
How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.htmlIf you cannot access your old account, you can still use an Admin to migrate to another (don't forget
always leave to an Admin who is not used except for testing and difficulty account).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">
-
Connected with the temporary profile "I can't access all the windows apps or my personal files.
OT: Connected with the temporary profile.
When I log on my ASUS laptop, I tells me that I am being logged on with a temporary profile. I can't access windows applications or my personal files. It started after my laptop suddenly stopped while on internet explore. According to the event log, event ID 4608 created a change of security status and it is logged when LSASS. EXE starts and the audit system is being initialized. Is there anyway to stop this temporary profile/access and return to normal use?
Many things in Windows Vista and Windows 7 is still applicable to Windows 8.
Difficulty of a corrupted user profile
-
Started MacBook and not charging with the charger connected. Charger works. Keyboard does not not except the power button / stop. Restarted ex drive no available help hoping that it was a matter of SW. SW and the operating system works very well. Read some info online. Tried to reset the SMC. Now, the MacBook does not start. Can U help me please. Thanks in advance.
MacBook, 2010, Mac OS X 10.6.8
Hi Veronica Steward,.
I understand that you have turned into a series of questions about your MacBook and want help getting the computer to turn on. Here is an article that can help you through the steps to fix this problem:
If your Mac will not turn on - Apple Support
Let us know how it goes and thanks for coming to Apple Support communities.
See you soon.
-
Is connected with the temporary profile
Windows keeps connect me with a temporary profile, only on my account not the other two, I want to just access my files, the links using microsoft in other issues do not work and if I create a new user who logs with a profile temporary, just also want to know how I can access my files so I can get out them of this user account
THESE LINKS I TRIED BEFORE DO NOT WORK:
http://support.Microsoft.com/kb/811151/en-us
http://support.Microsoft.com/kb/555473Thank you.
Hi Alisha,
You said that didn't happen on your account and not the other two. And you said you tried these links, I hope you don't delete all users according to the instructions...
in any case, you can easily have access to your files on the account that you have trouble accessing via two other accounts work. Navigate to C:\documents and settings\ this folder contains all the user profiles and all the documents and the data is stored in the profile folder name. Find the folder with the name of your account on it and inside you will find all the documents, Favorites, etc.
To get to C:\documents and settings\ open my computer, double-click the drive that you installed Windows, and Documents and Settings will be a folder you will see in the beginning of the hard disk.
-Alex
-
Error Msg: "you are logged on with a temporary profile. Restart your computer and try again.
Try to start Windows Easy Transfer, but I get the an error msg saying I am connected with a temporary profile.
I use Windows XP and have 2 user accounts settings; each with administrator privileges. What is going on? How can I connect to avoid this problem?
I found this information.
http://voices.Yahoo.com/TECHTIPS-Windows-7-easy-file-transfer-tool-error-you-7098418.html
-
Windows does not load correctly, starts with a temporary profile
Yesterday, I used my laptop and it worked fine I close it correctly went to the store, when I returned an hour later and turned on my computer Windows Vista home 64 bit would not at all be responsible. I used my cell phone to get online and tried a few things and now 24 hours later became Windows to load, however he began with a temporary profile and all my photos, documents and programs are gone except via the box has changed mrecently, they are there. I tried to restore a system but all my restore points have been deleted even the ones I did today. I tried using recovery discs and it won't work. I would like to pick up my items, I contacted Microsoft support and they will help me unless I pay $99. I don't have a lot of money for advice on everything I can do to help. I can't get connected to my regular profile that tells Windows to check the event log, which I did and of course, do not understand what he says. Please help to solve this problem, I'm afraid to shut down my computer as it is not sure that I will be able to return.
Hello
"However, he began with a temporary profile.
See if that helps you.
It is the Microsoft information when loading a Temp profile.
"A temporary profile is loaded after you connect to a Windows Vista-based system.
http://support.Microsoft.com/kb/947242
And how to fix a corrupted user profile:
"Fix a corrupted user profile.
http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile
See you soon.
-
I use a Toshiba Satellite with windows vista. My father gave it to me, but instead of creating a new user account, I have renamed the original administrator account. two years later, I have 3 accounts on the laptop, which only the original is still the sole Director and has access to all partitions on the hard drive as well.
A week ago, my computer laptop power had reported issues so I immediately sent for repair. I came home today and the Standard 2 user accounts work perfectly. However when I connect to my original administrator account I get this pop - up message:
"The user profile was not loaded correctly. You have been logged on with a temporary profile. Changes to this profile will be lost when you log out. Check the log of the events for more information or contact your administrator "
I lost all my profile settings, including internet bookmarks, music playlists, etc. The office looks like a brand new installation of Vista and all the customization disappeared. I can't afford to lose all data. It is seriously important and was on my desk and in my documents.
How can I get my profile without losing any data?
Hi Salman91,
Thank you for visiting the Microsoft Windows Vista Community. New profile created, try browsing to the old profile (C:\users\username). You should see all the old user data. If this does not work, try to copy the files in Safe Mode.
Please let us know if that helps.
Dena
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Maybe you are looking for
-
Hello, I want to start by saying that I had a repair done by HP in March that went beautifully, they have been so helpful, the repair was perfect and the whole process was effortless! I am hopeful but scared about it. I also got the hinge on my desir
-
Tecra A6 - screen flipping 90 deg
Inadvertently, I managed to turn on display thru' 90 deg. The only way I managed to get it back was to do a restore of the system on the same day. A call to the helpline who said maybe ctrl + shift + 'R' or Ctrl + alt + 'R' can switch & this. None of
-
there as a direct fit replacement for the amd radeon 8760?
-
Error: "one of the drives should be checked for consistency" to start the computer
The original title: disk space My laptop is an Acer Aspire 5000 running with XP Home Edition. At a hard 100G drive with 2 partitions fat. Recursively shows problem at startup. The message displayed is "one of the drives should be checked for consiste
-
Download Norton off my Windows Sidebar Gadgets