final cut stop recognizing my external hard drive when updating to yosemite

Similar Questions

• Do I USE creative cloud as an external hard drive pour update my operating system?

  Do I USE creative cloud as an external hard drive pour update my operating system?

  The main cloud Creative program must be installed on your system's main drive - then you can't have the whole installation on a separate disk.  Applications can be installed on a different disk.

• FireWire devices are most recognized. External hard drive and the camcorder will not connect.

  My computer no longer recognizes the firewire devices that I connect to it.  The Device Manager shows the driver 1394 work very well.  I even deleted and reinstalled Windows XP.  My external hard drive so my camcorder are more recognized when I plug them cold or hot plug.  Two of them have worked very well for more than 4 years and now for some unknown reason, that they stopped just recognized.

  How can I get Windows XP to see again them?   I've tried everything.

  Hello Stevec5375.

  See the link below.  There is a fix for those running XP with multiple Firewire devices, thus causing a problem.

  http://support.Microsoft.com/kb/830987/en-us

  Please let us know if it did or did not help to solve your problem.

  See you soon

• Can't restore Vista backup - backup zip files are not recognized, on external hard drive

  I backed up my files with Windows Backup, which divide into 200 MB zip files.  Now I am unable to restore the backup because it is not recognized when I try to use the backup to restore.  It's on an external hard drive and Windows for some reason any do not recognize.  I tried to move it to the desktop, but it is not always recognized as a backup.  I tried to use the advanced restore, windows recovery, and it won't work.  Must the file with the zip files be in a specific location on the disk so that it can be recognized, or should it be named something specific?  Please help me, I really need these files.

  Hello

  Refer to this link and try the steps proposed by Divya.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/00aea6aa-5aac-4647-BA6B-24eac423da66

  It will be useful.

• Windows stopped Toshiba Canvio external hard drive because it has reported problems (code 43 error)

  This ext drive works on a notebook of friends (windows 7) and works also on the desktop (windows XP) but work on that notebook (windows xp). I realized problems as recommended by a number of times.  Problem remains.

  Hello

  -What diagnosis made?

  One of the motors controlling the unit does not work.

  First, run the troubleshooting material the Article from Microsoft fixit.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/

  Failure to fix, then uninstall and reinstall the device drivers.

  1. Click on Start then RUN and type Devmgmt.msc in the RUN box.
  2. Click disk drives in the list of hardware
  3. Click on the USB external hard drive with the question and click Uninstall.
  4. Once the hard drive is uninstalled, disconnect the USB cable.
  5. Wait 1 minute and then reconnect the USB cable. The driver should load automatically
  6. Search the external hard drive in Windows Explorer

  You can view the documentation for the hardware for more information about diagnosing the problem

  For reference:
  Explanation of error codes generated by Device Manager in Windows XP Professional

  http://support.Microsoft.com/kb/310123

  Hope this information is useful.

• Difficulty finding a WD external hard drive after update to 10.11.4

  Hello
  last week I updated my OS to El Capitan 10.11.4.
  After that, I have problems, make a backup on my external drive (Wester Digital MY Passport Ultra).
  After reset total of my iMac, the backup runs once, but the hourly automated backup stops.
  A manual start is not successful.

  The external hard drive is visible in the finder, but clicking the map Backups.backupdb, nothing happens. After a reboot all backups are still visible.
  It seems that the external hard drive is dismantled after the initial backup.

  Time Machine is running, HD connected properly.
  Latest version of the WD software is installed.

  Does anyone know the solution for this problem.

  Hi wots36,

  Thank you for using communities Support from Apple! I'm sorry to hear you're having these problems with your iMac and your external hard drive. If you continue to have problems with your Time Machine backups, you can find information and troubleshooting procedures described in the following articles useful:

  If you cannot back up or restore your Mac with Time Machine - Apple Support

  OS X El Capitan: If Time Machine can't find your backup disk

  Concerning

• Data being deleted on my external HARD drive when I copy it

  I have a hard drive of 160 GB extertnal USB and when I copy new data he deletion of old data. What's wrong with it and how can I stop it delete all my old data?

  Neil

  HI Neil,

  The only way, your data can be removed is if you copy new data to the same file/folder name to him and then click 'Yes' or 'Yes to all' in the warning box that appears informing you that the file/folder already exists.

  If you use a third party application to do the copy for you (such as bckup/restore utility) then this will also have a similar warning window if such a situation arises, and you also have to confirm that you want to overwrite your existing data.

  Short of a malfunction of the external hard drive, there are no circumstances in which the operating system can 'accidentally' too write your data.

  Kind regards

• My Windows XP Dell computer does not recognize the external hard drive when it is placed in a port of USP to work.

  I can't get my external hard drive to be recognized by my computer, a Dell PC running Windows XP, SP3. Any suggestions?

  Hello

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  A computer that is running Windows XP cannot detect a USB, an Apple iPod flash drive or an external hard disk drive

  http://support.Microsoft.com/kb/925196

  Hope this helps,

• Restoring data of Vista (from backup/restore) does not recognize my external hard drive, when I request a restore from a backup of data

  It does not recognize the HD during backups. The backup files are visible in date of..., and I believe they exist. HD is a new Maxtor external

  Hello

  ·          Windows recognizes the external hard drive?

  ·          How you back up files?

  ·          You get the error message?

  ·          It is visible in Explorer? Disk management how about you?

  You can put your system to boot and try to run the backup. This disables antivirus software and other third parties to eliminate conflicts.

  See the article below on how to place your system in the clean boot state.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:http://support.microsoft.com/kb/929135

  Note: Please make sure that the computer is configured to start as usual by following step 7 of article.

  Diana

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Photos of deleted the external hard drive after updating Lightroom

  I just installed the new update.  Wish I had read some of the forums before hand.     Of the photos on external hard drive and I wanted to add them to the catalog.  After that I added to an existing catalog, I don't see pictures on the external hard drive.     If I click on the folder on the external drive, there is nothing in the folder.     If I unplug the external drive, I see the question mark by the photos.

  In addition, if I take the external hard drive and plug it into my laptop (Macbook Pro), Lightroom detects photos and does not watch the point mark.  However, I can not see the pictures on the external hard drive.

  Where can I watch, or how to find them.   This seems very odd.

  Thanks for any help.

  Thanks for the reply Akash.

  I did as you asked.

  When to disconnect the drive and click on ""?, "it shows the external drive as the previous location."

  Where to plug the hard drive and search using the finder, that nothing is found.

  When I connect the drive, Lightroom see files and works normally.

  Lightroom sees the files if the external hard drive is connected which leads me to believe that they are still on the drive.    However, they are able to access by Lightroom.  I see nothing in the files on the external hard drive.

  This really baffled me.

  Kind regards

  Birdie

• PC stopped recognizing 3.5 hard drive external Toshiba

  Hi all

  I have a 3.5/250 GB Toshiba hard drive external. I use Windows XP as my operating system and for some reason, my PC stopped recognizing saying 'USB not recognized '.
  It is supposed to be taken & play and I'm sure that I didn't have a driver, when I installed it.
  If anyone can help or has any suggestions, I would be grateful.

  Thank you

  Malc

  Hallo Malc

  It is possible that you have removed the external device without using the option remove the device safely. Restart the machine and try again.

  Otherwise, you can remove all ports USB device manager and start option to add material on the list. After detection and installation it should work again.

• Computer does not recognize LaCie external hard drive when it is connected.

  Should I just a 'driver' of the manufacturer so that windows recognize? Help, please.

  The device is a hard drive (250 gb) bought in 2006.   LaCie support has provided relevant solutions.

  I disconnected the USB line, reconnected with the power of the unit it turned on and off while only plugged, unplugged, and made all possible combinations of many times. My computer does not recognize anything.

  I can't find it in my computer, and also, the computer does not list the device in the Device Manager utility.

  I have disabled the Windows Firewall.

  The computer with which the external drive worked and one that currently does not recognize are model computers windows XP (2008).

  Thank you very much for your help.

  Thanks for the reply.

  In the meantime and after reviewing all similar positions, it turns out that find the 'live' usb device does the trick.

  So, other people with similar problems, try the usb cables at the back of the computer (all), then by restarting the connection there.

  It worked for me.

  Thanks again for the reply!

• Vista boot from the external HARD drive when 7 is installed on the internal HARD disk

  I had windows Vista pre-installed on my HP laptop, now I installed the new hard drive and downloaded windows 7 on it. and I use my drive HARD back as my external storage medium and it came with vista pre-installed. is it possible to start fromUSB and use vista alternately without remove current HDD with 7 and keep their replacement on a vice versa. I already changed the boot order, but it shows the blue screen and then goes out... help me if you think you have the solution for me...

  Hello

   
  You can not install Windows vista on a USB hard drive. The reason is that manager (Bootmgr) boot will always be on the internal hard drive and will not read the USB drive letter properly and it continues to change.
  However, you can install the two HDD internally, and then you can have a dual boot option by adding the entries in startup of the operating system Windows Vista, Startup Manager (boot mgr).
  You can check the following thread:
   http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-windows_install/dual-boot-with-two-hard-drives-one-with-Windows-7/7e27ef71-e093-441F-AC97-ffd212c20368

• update my laptop stop recognizing the driver of Bus controller universal external hard drive.

  Recently my laptop stop recognizing the external hard drive. It was working fine before. The MFG. external IOMEGA Hardrive said universal Bus controller driver to be upgraded. It is Intel (R) 82801DB/DBM USB 2.0 Enhanced Controller pipe - 24CD. My several attempts to install an automatic update of the driver from the Intel Web site has failed.  What to do next?

  Hello

  1. which is the version of the service pack installed on the computer?

  2 have you made any changes to the computer before the show?

  3. What is the exact error message?

   
   
  I suggest you perform the steps described in the document:
   
   
  How to get and install the USB 2.0 drivers in Windows XP Service Pack 1
  http://support.Microsoft.com/kb/329632
   
   
   
  I hope this helps.

• It seems my time machine and external hard drive are wiped clean this morning I started my computer. Is there a way I can know for sure if anything is salvageable?

  I started my iMac this morning find a message that I didn't stop my Seagate external hard drive properly. I always just shut down my computer, I do not close the hard drive first. Now the computer says disc is not readable by this computer. Looks like it's a goner but maybe not, I don't know. I can't tell if it's the same thing to my Lacie Time Machine. There are no backups on it. How will I know what to do? Nothing is salvageable?

  

  Try to run a disk utility to repair your disk of TM. It seems that there are 757 GB of backup data it me.