Find the device - MacBook Pro stolen-

Similar Questions

• MacBook pro stolen the question, 'Find my mac' still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my phone app stop working when I change the password?

  MacBook pro stolen the question, 'Find my mac' app still works to erase personal information if I put it before changing the icloud/itunes account password?  or is my mac app stop working when I change the password?

  Unless you fully active 'find my Mac' BEFORE that your mac has been stolen, it can't do anything for you now. It is not active, and there is no way to make it active after the fact.

• LaserJet Pro M127fn Installer cannot find the device on the network

  Hello

  I just bought the product, but during the installation - setup is unable to find the device on the network. Device is properly registered to the address 192.168.0.14 (with static IP address), I can see the dashboard configiration at the same address via browser and all works well with the network itself.

  Try to ping the IP - it's ok. Tried to install without active firewall - also fails.

  Double checked the installation process - with automatic search and provide the IP address of the printer - both failed.

  Also, I rebooted the router and the switch and the computer. Is not new. I also tried downloading the last executable configuration on the site - and even once, it fails with 'device not found on the network.

  Then what do I do to fix this?

  Thank you

  Finally found a solution. It is strange as it may seem, but after all, it's a solution.

  -Rinse your DNS and your ARP cache (see the Google if you don't know what that means)

  -Reboot the router (or, where appropriate - switches)

  -Change the IP address of the device on your network. Try with round numbers like (192.168.0.20)

  -Restart your router (and if applicable - switches)

  -Restart your computer (s)

  -Don't run the Setup again and the hoprefully you will have no errors and everything works perfectly for you

  If your problem, similar to mine, persists, repeat the above process again and again... and again...

  Good luck

• The latest Macbook Pro supports final Cut Pro 7?

  think of the upgrade, but cannot find anywhere that will tell me if you can run Final Cut Pro 7 on the latest Macbook Pro or iMac.  Thank you

  Http://roaringapps.com/apps?platform=osx , you can display the software compatibility with the version of Mac OS X. According to their announcements, Final Cut Pro 7 and Final Cut Pro X will run on El Capitan, which is the latest official version of Mac OS X. The latest MBP runs the latest version of the software.

  Your answer is Yes.

  HTH

  Leo

• trying to install from the disc image on the new macbook pro, I get a' configuration error: 6

  Hello, I created a disk image that includes an installed version of Adobe CS5, trying to install from the disc image on the new macbook pro, I get a' configuration error: 6 ". Is it possible to correct the error and install cs5?

  Thank you

  Dominique

  Adobe applications must be installed using files of facilities.  Uninstall, use the cleaning tool, and then reinstall.  If you need a download link is provided below.

  Adobe Creative Suite cleanup tool

  helps resolve installation for CS3 thru CS6 and creative cloud problems

  http://www.Adobe.com/support/contact/cscleanertool.html

  CS5 - http://helpx.adobe.com/creative-suite/kb/cs5-product-downloads.html

  You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

  Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

  CS5: http://prodesigntools.com/all-adobe-cs5-direct-download-links.html

  Quickly find your serial number

• Problems with the new Macbook pro 15' maxed out

  Here's a quick post about my experience so far with the new macbook pro. I just got a brand new fully maxed out in spec macbook pro 15 inch 1 to SSD 16 GB RAM AMD R9 370 m GPU (set to automatic switching is not always) and a 2.8 to 4 GHz i7. I turned on and set it up which was nice and took 2 minutes. Then experience decreased a little when I saw an EST 05:36 hours of battery life remaining to 94%. So I loaded 100% and it is still 60% of battery life announced and no program running that I literally just signed a brand new machine.

  Then I tried to use the migration wizard to import a backup of my iMac 5 k so I can do everything on this clone for my laptop. After having successfully connected (he told me if my password for time machine was incorrect or not) it froze and did nothing, continue did nothing.

  Then place had to call support, was a guy on the phone in 30 seconds and I unplug and restart the machine time, always that same question so I transferred to a guy with "more training". The new guy I could say knew a little more and knew that I knew how to set my password or if I walked in their properly for a bit but they all have been set for the same password just for this. I created a second admin account called "test" under his leadership, and when the migration assist froze on this account, he was surprised and proceeded to transfer me off.

  I preceded to restore fully the machine into thinking that my account setup is causing trouble with the migration assistant, and it turns out that the closure of that laptop it can only continue to 'download additional components', while that connected for 30 minutes so all last night was wasted, and now I guess he's got 5 left 12 hours to download original 'things '. Keep in mind that I can download 5 GB in one hour... After he wake up this morning and ending up where I left it last night :/ he says 84 hours go, now 72 and 51 and it is not updated even once in seconds, it took 20 minutes to 84 minutes to 51, it's literally a day 2 reset extravagance or what? Just to download it I can only imagine the actual plant until I can install my programs.

  The cost of the laptop was about $3600 but paid ~ $2900 after headphones were included and $250 off for delivery to students and other issues on the agenda of the process itself that is not my complaint, what happens, but sitting with a new camera and support useless just to ask me if I can use actually tomorrow at this price are unacceptable.

  I would like to continue using it for a while.

  You can try to reset the SMC http://support.apple.com/kb/ht3964

• How to change the name of the device (MacBook Air) to a new owner?

  How can I change the name of the device (MacBook Air) to a new owner?

  You change the name of the computer in the sharing preferences, if that's what you ask the subject. If this isn't the case, then be clearer on what you need to know.

  If it is a computer newly purchased but used, then wipe you the drive and reinstall the original version of OS X that comes with it. So let the new owner set it up: what to do before you sell or give away your Mac - Apple Support.

• How to find the device ID?

  How to find the device of my CAN ID card and RIO (or card for something else)?

  I use MAX 4.5 and LabView 8.6.

  Thank you.

  Open MAX and go to the section:

  My system > devices and Interfaces > NOR-DAQmx

  It should list all your DAQ devices and say something like

  DAQCard-xxxx: "Dev 0.

  DAQCard-xxxx: "Dev 1.

  etc.

  Just look at your device

• Find the device based on serial number

  Hi all

  I got a spot on place to locate the Cisco gear in our (hundreds of them), got the serial number but wonder if there is a smart way to find out where is this piece? rather than 'show version' on each device, then look for the serial number. Please teach me. Thank you very much.

  Hi Duke,

  Thank you for using the Cisco Small Business forums. My name is Cristian, I'm a developer of electronic content, and I'm part of the small community of business support.

  Unfortunately, I don't know of a method where you can directly find the device via the serial number. However, I know that Cisco's FindIT uses the CDP of Cisco protocol to detect Cisco devices in a network. You could hover over with the mouse device names and the serial number will be displayed.

  I hope that this response will be useful, and I hope that you respond with questions or concerns.

  * Please answer question mark or note the fact other users can benefit from the TI *.

  Kind regards

  Cristian Gonzalez

  EContent Cisco Developer

• Need advice. Weather a small wacom tablet will be adequate for photography photoshop, or should I buy way. I want to use with the 13 "macbook pro

  Need advice. Weather a small wacom tablet will be adequate for photography using photoshop, or should I buy way. I want to use with the 13 "macbook pro

  If you carry your computer in a bag that is made for a 13 "laptop, the small tablet will fit as well. I have done this and found the small tablet to work properly. However, I found a screen 13 inches of being terribly cramped for using Photoshop.

• LR 5 doesn't work is not on the new Macbook Pro.

  LR 5 doesn't work is not on the new Macbook Pro.  Have tried 2 CC downloads, download licensed 5.6 and 5.5 download licensed, all the results in the same thing.  It comes up with the screen base but no signs and gives that an error occurred when changing the modules.  Nothing I have tried seems to help.  He also said "start with lightroom mobile at the top on the left, although it said it's Lr 5.6.  Anyone else having problems?  Calls to adobe are no help and have to wait until Monday for technical support.  Surely this must run on a NEW laptop with any other installed software!

  Setup logs was very good.  Application installed but is not working properly.  Finally got Adobe support and it turns out be a file permissions error.  Had to add applications and myself as accessors of the Lightroom folder under ~/Library/Adobe/ path and set permissions to read & write (was read only for everything except system) and apply to all the cases closed.   Works fine now.  Including this here in case when someone else is going through this issue.

• I have elements 9 Prime Minister, now have the new macbook pro with no disk drive, can I download the software?

  I have elements 9 Prime Minister. I now have the new macbook pro with no disk drive. can I download the software on the net, carry serial numbers?

  Hi Annie p.

  Please use the link below to download first elements 9

  http://prodesigntools.com/Photoshop-elements-9-premiere-elements-9-direct-download-links.h tml

  Please be sure to complete the section very important before you click on the download link.

  Thank you

• Can not find the driver for Deskjet 4180 with the new MacBook Pro and OSX10.9.4

  I can only find 4100 series that does not install.

  Ideas?

  Hi sensho.

  Welcome to the HP Forums!

  I see you are trying to find the driver for your HP Deskjet 4180, with a new MacBook Pro with OS X 10.9.4, and I am happy to help you with this driver issue!

  Please take a look at this website, OS X Mavericks v10.9: installing and using the printer on a Mac.

  Hope this is what you are looking for and have a great day!

• MacBook pro stolen, need to download photoshop on the new computer

  Are there no such thing as a support download page more? My laptop was stolen, and I am trying to replace my software on the new computer, an another macbook pro. I already own photoshop and dreamweaver, just need to re-download the .dmg. Having my serial numbers and all that, but it seems that now I have to join the cloud just to never use it again. Is this fair? And, if so, is it right?

  So, anyone have a download page in their bag? Buy Photoshop in 2012, probably CS6 v.12. Not sure about Dreamweaver.

  All the answers?

  Thank you happy, Anish and Jeff who responded to me. Awesome!

• Find my iPhone (MacBook Pro)

  My Macbook pro has been stolen. I used find my iPhone and the computer was off. I put the "notify me when it is recognized. After a few days, he was always off so I put the "lock". Last night, I got the email that says

  "The Mac has been blocked 22:52 December 21, 2015." If you retrieve your Mac, unlock using the access code that you created at the time where you locked. »

  It does not show a place, if it should show a place even for a locked computer?

  Thank you!

  Hi cjedwards,

  Sorry to hear that your MacBook Pro has been stolen. I hope that report you it to the police.

  Regarding the location, see If your Mac is lost or stolen - Apple Support

  Lock your Mac
  You can use find my Mac remotely lock your Mac with an access code. Alternatively, you can display a message on its screen. If you lock your Mac, you will not be able to follow.

  However, iCloud: use lost Mode

  States:

  You can lock a Mac or an iOS 5 device, but you cannot follow him. If you lock a Mac, you can not locate if it's not close to a WiFi network used previously, and you will not be able to remotely wipe.

  Hope you find.