Satellite Pro S750: No gesture touchpad

The S750 Pro Satellite is specified as having a control of the gesture touchpad. Toshiba has replaced my Satellite A660 with a S750 Satellite Pro, and I thought it was a don't drive test... no gesture control. I visited the driver page, and there is no driver for the synaptics touchpad. Instead, a pointer ALPS driver device is displayed. I tried to download it, but he warned during the installation I was replacing a driver for that which is identical.

Is the description of the control touchpad gesture simply a mistake? I am the only one without it?

Post edited by: Bookworm123

Hello

You might be right.
I visited this page http://support.toshiba.ca/support/isg/center/en/index.asp, but found no information in the user manual that gesture control would be available otherwise that there is no synaptics driver to download.

But you can visit the Synaptics page to download the latest driver:
http://www.Synaptics.com/resources/drivers

Thanks for posting comments after installing this driver

Tags: Toshiba

Similar Questions

  • Satellite Pro S750 - Bios password unknown. How can I fix?

    Hey

    We have a Toshiba Satellite Pro S750 with a Bios password which is unkowen for us, we never tried the password we can think and always know luck.
    One of the user who has used some how put either them as I read on the forms Toshiba sattlights have a bug which sets the bios password with informing them the user.

    If anyone has any help would be much apprecated.

    This bug only affected one or two Satellite models for many years, there are hundreds of models Satellite now with completely different hardware. The only way to remove the password on the S750 is to send the laptop to a Toshiba Service Center and to pay for the work.

  • Satellite Pro S750-008 diskpart ' all don't own "is suspended, no HARD disk activity

    I'm following the instructions at sevenforums to erase my entire HD before sending my laptop somewhere.
    In particular, I publish the diskpart command "prompt at startup.

    I only have a single HD on the laptop, disk 0, and I chose it before "clean."
    The page above says that it takes about 1 hour for 300GB and I have 300 GB, but it is not yet done after 2 hours. However, I also note that the HD LED shows not all activity.

    The hung process due to the fact I clean the HD even I am operating from?
    Is it advisable to either stop the machine, and then carry the HD on in an external enclosure so I can use another computer to look/see what has been deleted?
    Will it hurt the HD to interrupt such a procedure (possibly hung) deletion?

    I'm running Windows 7 Pro 64 bit on a Toshiba Satellite Pro S750-008 (aka PSSERC-00800)

    Hello

    Why you n t use a DVD recovery or a floppy from Win 7 to format the HARD drive?
    Boot from the Toshiba recovery disc. The recovery disc formats the HARD drive and partitions and redefines the laptop to factory settings.

    You can also start Win 7 disc (or other Microsoft) and can format the HDD too.

  • Satellite Pro R50 - B - feature touchpad does not work

    Hello guys,.

    I have a problem with the touchpad of a Toshiba Satellite Pro R50 - b pssg1e - basically, I can move the cursor, but I can't use it to scroll or anything else.

    I encountered this problem of first on windows 8.1 and I thought he was not yet a driver for the touchpad. Now, I have installed Windows 7 64 bit and still the same problem. Idon't understand the problem, I installed all the drivers from the Web site, including «touch pad driver made by Alps» Electric

    In Device Manager, the mouse is recognized as just a Ps/2 compatible mouse. And in the mouse settings, I did not advance tab where I can activate additional functions of the touchpad.

    PS. the touchpad is enabled, so no, the solution is not fn + f5.

    Thank you in advanced!
    Andrei

    Hello

    Laptop Satellite Pro R50 - B should support the touch pad with gesture function.
    In the 40 user manual page, you can find information about the movements that are supported (tap, pinc ir stretch and two fingers scrolling).

    Two fingers scrolling present works as follows: place two fingers down and drag them vertically or horizontally anywhere on the touchpad. This allows you to use the window scroll bars.

  • Satellite Pro A100/P100 - compatibility touchpad

    Hello

    I have a Toshiba Satellite Pro A100 and I saw pictures and videos on the internet of people have these keyboards LCD that illuminate blue and have shortcuts but only touchpads I can find like that correspond to the P100 and ino models some of the parties each other as I was ve documented but I can t can't find if the touchpads do or not but I think that s what other people I saw someone do any ideas?

    Thank you to

    Hello

    The two models of laptops are old enough, is not easy to find some useful information on this subject. I remember that some P100/A100 and A200/P200 / X 200 models were offered with these keyboards.

    I m not a technician but I think these keyboards with keys have two cables must be connected to the motherboard and keys touchpad without buttons have a flat cable only.
    (I also believe that models with and without this touchpad have different numbers) model numbers) so it is possible that they have different mothers.

    What you need is a professional help with this. I mean, if possible, try to contact nearest Toshiba authorized maintainer and ask for help. They have access to the database of Toshiba and can check the specification for your laptop model but also data base for all hardware components of portable.

    They may be able to help you with this.

  • Satellite Pro S300-ez2502 - sometimes touchpad stops resonding

    Hello

    I use Toshiba Satellite Pro S300-ez2502 with Windows Vista Business.
    Sometimes my touchpad doesn't work for a couple of seconds at least 1 time a day.
    It becomes a bit annoying, because the mouse pointer move by moving the finger on the touchpad.
    Can someone please suggest a solution? Hoping to hear from you soon.

    Thank you
    Adil

    Hello Adil

    Apply for solution is simply but it will be interesting to know when that will happen. Usually, if the mouse is frozen it can be because of a background activity or HARD drive busy.
    Have you noticed the HDD activity (HARD drive flashes) when this happen?

    I mean when you wrote sometimes that's not easy to say why this happens and what you can do about it.

  • Satellite Pro C50-A-153 - Touchpad does not work properly

    First, sorry for my bad English.

    I have a Toshiba Satellite Pro C50-A-153, the problem is its touchpad and not work correctly, the mouse does not move when I move the finger on the pad, it seems that if I had to roll the bar "or the mouse wheel.

    Sometimes, the 'mouse' works for 20 seconds and then again the same thing. An external mouse works fine.

    It is not the problem of the functions "Fn". I tried to stop, reset the battery and press the power button to 50seconds. I also tried to uninstall the drivers for the Touchpad, and I think that I tried to change all the properties on the 'Control Panel - mouse'.

    Can someone help me with this?

    Thank you.

    On most computers laptop Toshiba is installed the Synaptics touchpad driver. With this driver, there are available additional touchpad settings. Try it please change these settings and turn off the features you don't need.

    How to do that you can read on https://aps2.toshiba-tro.de/kb0/HTD3101Z30000R01.htm

    Check it out.

  • Satellite Pro A210 - keyboard and touchpad stop working after hibernation

    I installed Windows 7 (32 bit) on my Satellite Pro A210 and have a similar problem. When it starts OK but after hibernation the keyboard and touchpad stop working after 3 minutes. The only way to fix it is a re-boot of the force.

    Anyone have any ideas?

    Hello

    You have installed all the drivers for your laptop? I mean especially the chipset driver.
    Check this box!

    If you have yellow exclamation points in Device Manager, you must install all the missing drivers.

    Last but not least don't forget to install all Windows 7 updates available that you can get thorugh Windows Update.

    Sorry, but that's all I can say at the moment

  • Satellite Pro L300 - keyboard and touchpad issues

    Hello

    I just baught my GF a PC Toshiba laptop refurbed for his 21st birthday from a reliable source, it's a Satellite Pro L300.

    I started it until all the setup stuff, me there only to find that the keyboard and the touchpad work not AT ALL.
    The keyboard caps lock key is not even lights up when I press it.
    I downloaded all the latest drivers for EVERYTHING Inc. the touchpad, it makes no difference.

    I'm quickly running out of ideas and come to accept the fact that the keyboard and the touchpad is maybe defective and therefore evil must give my GF a defective laptop for Denise 21st, not happy :(

    Any1 have any ideas?

    Thanks :)

    Edit: OK, OK very strange, after that I sent this message, I tried the keyboard once more and it works fine?
    Could this be something 2 do with the download of the VFR package?

    The touchpad is always tired, even when I try the fn + f9 combo?

    2nd edition: Ok now the keyboard stopped working again!

    ON EARTH!

    Hello

    Looks like a keyboard problem. who knows why it doesn t work looks like something would be wrong
    I recommend you visit your dealer and replacement request
    Otherwise, you may contact the ASP in your country for a fix

    I think it's everything you could do

    Good luck

  • How to disable Toshiba Fingerprint Utility on Satellite Pro S750?

    I am running Windows 7 Professional 64 bit on a S750 Pro Satellite. Is there a way to permanently disable the Tohisba footprint?

    I don't want to uninstall it, just to prevent it from running at startup.

    > I don't want to uninstall it, just to prevent it from running at startup.

    Yes, it's possible just type msconfig in the search and launch the tool.
    Now, go to the Startup tab and uncheck the line where is mentioned the Toshiba Fingerprint Utility
    Click on apply and restart the laptop.

    After restarting again the laptop does not load (starts automatically) the utility of fingerprints

    If you want to use again, go to msconfig and recheck this line.

    Welcome them

  • Satellite Pro M70: disable the touchpad when you use a USB wireless mouse

    I want to disable the touchpad when you use a USB wireless mouse. Can someone tell me how to do what you please?

    Hello

    Open the control panel-> mouse. There should be an option to disable the touchpad.

    Good bye

  • Satellite Pro A100 PSAACE - the touchpad buttons do the same action

    Hello

    I have a problem with my left button touchpad keys. Although the affected software the left click function, he always does the same action as the right button.
    Drivers and installation of Windows are new. Is this a hardware or a software problem?

    Kind regards
    Oliver

    Hello

    > Is that the hardware or a software problem
    It's not easy to say, but have you checked the touchpad features using the OS preinstalled Toshiba?

    Usually, the touchpad should work without problems using the original image of Toshiba.

    May I ask what model of laptop and what OS do you have?

  • Satellite Pro P100 - Synaptics touchpad problem with Win 7

    Satellite Pro P100 with Synaptics Touchpad, was now running Vista, Win 7 64 bit.
    The original driver had an option "disable when the external pointing device connected.

    I installed a Synaptics Synaptics_v14_0_3_C_XP64_Vista64_Win7 driver - 64_Signed_default.exe that does not have this check box.

    It works fine except that sometimes the Microsoft Mouse becomes works all the seconds that she or the touchpad to fight everyone. I have to disable the touchpad.
    So the next time I turn. If I do so without a mouse, I can't use the touchpad until I plug the mouse, turn it back on, then disconnect the mouse.

    Thank you

    Hello

    Try to install the Synaptics drivers and Alps touchpad page pilot European Toshiba.
    Choose the touchpad Win 7 drivers out for a satellite L500 series.

    By the way; the touchpad can be enabled and disabled by using the FN + F9 button combination. It is not necessary to have all the options if FN + F9 works very well.

  • Satellite Pro L300 - touchpad does not work

    Hi all that I need help urgent because it drives me crazy. First of all, I use XP PRO. My laptop is fairly new, only around the age of 4 months, I had no problem with it at all. I formatted my laptop yesterday and reinstalled all the drivers that I downloaded here:

    http://www.ISD.Toshiba.com.au

    and everything works fine except the touchpad. I have already installed shared, utilitarian toggle the touchpad Module and I have the latest BIOS installed and reset all default settings and I made sure that the touchpad is enabled in the BIOS, but also pressing FN + F9 to enable during Windows.

    I installed the latest touchpad driver Synpatics I downloaded from the homepage of Synaptics. But for some reason any, that it does not work, I don't know what is the problem here. My touchpad worked before I formatted my laptop, it worked fine and has never had any problems. Will you please tell me what is wrong because I need to use my touchpad sometimes as well, so I can't use a mouse all the time.

    Hello

    > I installed the latest Synaptics touchpad driver that I downloaded from the home page of Synaptics
    I think that you question refers simply to the driver for the touchpad that is missing or incorrect.
    I put t know how it works on Toshiba notebook Australian, but the Toshiba European Satellite Pro L300 units needs touchpad different drivers. some use the Toshiba touchpad driver and some units need a driver for the Synaptics touchpad.

    In your case, I recommend this controlled again.

    By the way; My touchpad is always disabled so that en external mouse is connected.
    It is parameters that control it. Please check in your touchpad properties too!

  • Touchpad Synaptic on Satellite Pro A100

    I have a satellite Pro A100 equipped the touchpad above 2 weeks of age.
    I find that using this touchpad is very difficult to learn.

    It is designed to pass a large window to a small if it is typed into a corner and active or disables the return if she is engaged again. The idea is fine, but it is too sensitive and is not easy to control everything.
    Is question - possible to disable this feature? New driver perhaps?

    If this is not the case, is it possible to get a compatible touchpad which does not have this feature, I really wouldn't sell like a new computer.

    The Synaptic it mounted on my last computer did not have this feature and has been very easy to use.

    Hi guys

    All the features of touchpad could be a bit confusing for someone who has never used the extra functions of touchpad.
    I have disabled all the touchpad has because I don't need all the features of this and I mainly use the mouse

    But I think that if someone goes to work and uses the features an extended period then usage will be much easier.

    Best regards

Maybe you are looking for

  • Airport Time Capsule device not found

    I have the time Capsule on the airport of the TB 3 802.11ac (bought 9/2014).  It integrates the latest version of the 7.7.7.  Just last week, I received the error device not found (.. .has been previously a part of your network... etc.).  The interne

  • How to connect to the list of the pins for a redeclenchables pulse train

    Hello I'm relatively new toDAQmx, especially for the counters. I have problems to determine what pins to plug on the DAQ card. I would like to run the vi described here, but am not sure how to connect the card. I looked at the manual of the X series

  • VISA driver for serial connection

    When I try to open the Instrument i/o assistant, I get an error telling me that it is not installed correctly. I think it's because I'm using a serial port, not GPIB. I can't find the right driver. Can someone point me in the right direction?

  • Errors on Windows Vista KB2470478 ESENT

    I am running Windows VISTA Ultimate SP2.  I've had this laptop for about 4 years and have upgraded memory and drives without incident selection until I recently updated to a new 1 TB of HARD drive.  I now receive errors of ESENT this update of Window

  • Letter of reference for my work that I did in Dell

    Hello Am Anil Pakina, a former employee of Dell. I'm looking for a reference letter from HR for projects I've been working in Dell during my tenure. Please let me know to reach out for the same thing. It is very important that essential for me to rec