finger 2 roll

Similar Questions

• HP G6 2225TU finger singal roll does not

  Hello fields,

  m using HP G6, 2225TU, Win7 x 64.

  His finger singal roller does not work after restoring the system, how two finger roll is very good. I changed my touch pad settings several times.

  The Device Manager status is OK.

  ....................................................

  Any help?

  Hello, @SheikhSahib

  It seems that you are having problems with the functionality of scrolling one finger of the touchpad, after having done a restore of your laptop. I will try to help you with this.

  First make sure that the drivers are current, you can do this with the HP Support Assistant.

  So take a look to see if this can help: use and configure the TouchPad (Windows 7 and Vista).

  If those who do not work, try to go into Device Manager and uninstall the driver, reboot the laptop.

  Please let me know how it goes for you.
  Thanks for posting on the HP Forums.

• Disable the finger on the button Rollover

  I was wondering if someone can help me to disable the finger when rolling a Flash button.
  
  Thank you!

  instanceName.useHandCursor = false;

  .. .apparently sound called the hand don't finger not... is it Friday yet?

• HP Pavilion 15 laptop: Touchpad scroll not working not

  I opened my laptop and I can not more two finger suddenley roll. I tried to open up
  Settings - Options of additional devices mouse - mouse and touchpad.
  But when I click it, it says "control panel extension is incompatible with the version of the driver," and once I click ok it kicks me out of the next page.
  
  How to restore two scrolling settings figure?

  Hi Bianca96!

  I understand that you are having problems with your two fingers to scroll contact on your tablet.

  Did you take a glance at our article on the HP support site that treats of the "If use you the touch pad or click in win 10? You can find this article at http://support.hp.com/us-en/document/c04648748

  If this is not enough, I would suggest that you uninstall the device (via Device Manager) and software, and then reinstall. You can also run your HP Support Assistant to ensure that all of your drivers and firmware are up to date.

  Finally, I would go into the BIOS on the main tab and press the F9 key to restore the default settings.

  I hope this helps.

• EliteBook 8470w: 8470w WIN 10 elitebook

  Hi, I think in upgarding and wanted to check the compatibility of the elitebook 8470w with win10?

  Problems with the hardware compatibility?

  In particular, intend to set up a HP 120W docking station, so I wanted to make sure that it will work with Win 10.

  Thank you, David

  It should work only HP didn't release driver patches for:

  Bluetooth

  Fingerprintscanner

  Some say that spirit the touchpath problems, but it works, but not all functions

  as the finger 2 roll, side scrolling...

  With a little research, you can manage on fixing problems like I did!

  But your system is ready to go...

  Greetings

  Sam

• How can I change the settings for my touchpad of Windows 8? Scroll and click on the problems.

  I have an Acer Aspire V5 - 571P and I don't like the operation of the mouse.

  I want to change the touchpad so that it doesn't click, I accidentally double - tap twice. (I want just one click to save when I click the mouse pad actually)

  I also want to make sure he that when I 'finger 2 roll' down a Web site or in the menus, it goes the same direction instead of reverse (currently, I drag it to go down and left to go right, I want 2 fingers down to go down and right to go right)

  I couldn't find it under the control of the settings panel and mouse. The only thing I saw was double clicking.

  Thanks for your help, I hope I'm not the only one having problems

  I had the same problem and was able to operate the momentum, but the only thing that works is the reverse of scrolling... my reverse option is grayed out so I can't uncheck it and it makes me crazy... Please help

  I found the answer in another thread! YAY it works for me now.

  That's what the answer was:

  "Go to the 3-rd - 'extra' tab - and choose the last option left -"effect of gesture '; There, change the setting of "ZoomPerfect" to "Microsoft touchpad modern experience." and then return to the 2nd tab (multi-doigt) and choose "Scrolling" again once and voila - now you will be able to change all settings here, including setting "Reverse"! »

• How to disable the index to the rows of the table updated

  Hello world

  I have a problem on a table with Oracle11g.

  I would update a table a lines opposite two in a table. This table has an index, and during the inversion, the index is duplicated.

  So, I turn off the index and then rebuild all indexes like this: How to disable the index in oracle

  However, I can't update a table when my index finger is rolled unusable.

  I create my table:

  CREATE  TABLE MY_TABLE(
    ID                         NUMBER(5) NOT NULL,
    TYPE                        NUMBER(1) NOT NULL,
    PRIO                       NUMBER(4) NOT NULL,
    CONSTRAINT PK_MY_TABLE
      PRIMARY KEY (ID, TYPE )
  );
  
  CREATE INDEX  PRIO_UK
      ON MY_TABLE(TYPE, PRIO);
  
  
  
  

  Then I selected all the elements and the results is:

  ID	Type	Prio
  1	1	10
  2	1	11

  Then, I tried to update this list with this script:

  UPDATE MY_TABLE set PRIO = 11 WHERE ID = 1 AND TYPE = 1;
  UPDATE MY_TABLE set PRIO = 10 WHERE ID = 2 AND TYPE = 1;
  
  
  
  

  I have an error on the first line, because the subscript for type 1 and 11 priority already exist.

  You have another solution to solve my problem?

  I thank you very much.

  Do not disable your index. Just perform your update with a single blow. Like this

  SQL> select *
    2    from my_table;
  
          ID       TYPE       PRIO
  ---------- ---------- ----------
           1          1         10
           2          1         11
  
  SQL> update my_table
    2     set prio = case when id = 1 and type = 1 then 11
    3                     when id = 2 and type = 1 then 10
    4                end
    5   where (id = 1 and type = 1)
    6      or (id = 2 and type = 1);
  
  2 rows updated.
  
  SQL> select *
    2    from my_table;
  
          ID       TYPE       PRIO
  ---------- ---------- ----------
           1          1         11
           2          1         10
  
  SQL>
  

• G4-1350br Pavilion: Touchpad two finger roll

  Hello

  My Pavilion laptop g4 1350br is with a little problem since I've updated for Windows 10, every time I turn on my computer, the scrolling of the finger defects two touchpad is reversed (when I try to move to the top of the screen down), I always access settings and back to normal, but it's just off that it reverse. I want to you help me with this.

  Thank you!

  Hello

  Try the following.

  Hold down the Windows key and press R

  In the run box, type regedit and press enter

  In the registry editor, navigate to the following

  HKEY_LOCAL_MACHINE\SOFTWARE\Synaptics\SynTP\Install

  Inside, look for a key named DeleteUserSettingsOnUpgrade

  If it is present, right click on the key and select Edit

  Set the field data of the value 0 (zero) , and then click Ok.

  Close the registry editor.

  Make the Synaptics setting changes you need in the usual way and save them, and then check if they are now kept after a reboot.

  Kind regards

  DP - K

• Two finger roll suddenly does not work

  Hello

  Suddenly, my two fingers scrolling doesn't work. I don't remember not recently updated, so if someone could help I would appreciate it a lot!

  Model: HP Envy spectrum-xt, eo 13-2000

  Windows 10 pro

  Thank you

  Mike

  Windows 10 updates on its own default. Microsoft has given a choice between automatic update or refuse all updates, unlike previous Microsoft operating systems.

  Enter the control panel and click on the Synaptics section and fix option here.

• Sierra + Magic Trackpad 2 = Force click with a single finger no longer works

  Since the upgrade to Sierra, did someone else, difficulties with the Magic Trackpad 2 and using the force click to pull up definitions? If I turn it back to "tap with three fingers," it works, but is not the "click with one finger. In fact, I'm not sure I can get this intermediate response click at any point that used to be present in El Capitan.

  Hey Lonnie Warpup,.

  If I understand correctly, you are using macOS Sierra and you try to use the power of touch, but it does not perform this action.
  I would recommend that you read these articles, they explain if your device supports the Force Touch, with a setting to enable and disable the Force Touch and how to set the sensitivity and how to turn the Look up feature words.
  
  

  The Magic Trackpad and Magic Trackpad 2 supports all available on laptops Apple trackpad gestures.

  Sierra macOS: use a trackpad Apple wireless

  1. In the Apple menu, choose System Preferences.
  2. Click Trackpad.
  3. Click on the tab 'Point & Click '.
  4. Find "Click pressure" and adjust the slider according to your preferences. Note that the sound of the click of Exchange with the click pressure adjustment.

  To turn off the click Force function, uncheck the box 'Force Click and haptic feedback'. This will disable the functionality described in the Trackpad preferences pane.

  With the help of a touchscreen trackpad Force - Apple Support

  • Look up a word: CTRL-click on the word or phrase (in some applications, you may need to select all first), then select find from the context menu. Or type the word or the sentence with three fingers (if the gesture is selected in the Préférences Trackpad).

    If your trackpad supports force by one click, you can set the gesture of looking up to use it instead of a tap. (To force the click, press firmly until you hear a click deep.)

  macOS Sierra: search for words

  Thank you for using communities of Apple Support. Have a good.

• SE - 10 IOS IPhone: finger rests to open

  IPhone SE

  IOS 10.0.2

  Problem:

  -wake-up iphone with sleep/wake button. Then finger rest to unlock. IPhone unlocks, but stay on the lock screen. We need to press the Home button to go to the main screen. It works sistematicaly.

  -wake-up iphone by pressing the home button. Then finger rest to unlock. Two things can happen (randomly):

  (a) iphone unlocks and stay at the lock screen. We must then press the Home button to go to the main screen

  (b) iphone unlocks and go directly to the main screen

  This happens randomly, without any logical behavior (I tried to understand by repeating the process in different conditions, but without success).

  For daily use of the base, it's boring. You never know were are we...

  Anyone with the same "problem"? Is this a bug?

  Thank you

  I found that if I lay my finger on the home button to make sure you have contact with Touch ID and then press the home button, it seems to work as it did before. However, if you press the home button before getting the right contact, this can sometimes cause you need to press the home button. I seems to have gotten better and better with my iPhone 6s.

• Finger rest open iOS10 iPhone 5

  iPhone iOS 10 5

  10 for iphone iOS 5 does not provide the function "Rest finger to open", I won't click on Home Button 2 times to unlock the screen. It will be broken someday.

  I just want that my "slide to unlock" back, please help how to deal with this issue.

  Thank you.

  Tell Apple: http://www.apple.com/feedback/iphone.html

• 4 finger swipe does not work under macOS Sierra!

  Hey all, I upgraded to macOS Sierra and noticed that one of my function used more regularly on Mac OS, 4 finger swipe to switch between desktop computers does not work! Mine is an April 2011 MacBook Pro.

  Earlier, 2 fingers sliding back in the files, similar to switching back and forward for the Web pages in Safari, has been abandoned without reason penetrable. I hope that's not the same fate for 4 finger swipe to switch between desktops.

  I probably use hundreds of times every day for switching between desktop computers because I have safari, MS Word and open the mail outside of iTunes on separate workstations. I hope that a fix is released soon!

  Apple, do not bite of useful outdoors features!

  Ravi Reddy

  4 finger swipe works for me and appears as the 2nd part of the Trackpad Control Panel.

• cannot use three finger view Preview

  cannot use three finger check to open in the preview pdf

  If you mean that you can't have three fingers tap the trackpad for Quick Look, a file, I got that too. One of the best features of Mac OS x, so I hope they fix very soon!

• Finger remains open does not work

  I am very concerned by exhaust on my 6s iphone home button so I put "Rest finger to open" but it doesn't work? Am I supposed to do something else?

  Just to clarify - when you say that it does not work you can answer with more details.

  If the phone is locked, you must physically, press the home button or the sleep/wake button and then rest your finger on the button Home. If you physically push the Home button, it should wake up and unlock the phone in virtually a single step, as the press wake up the phone and the finger being almost immediately this button indicates the contact id and unlocks the phone. Note that before iOS 10 physical pressure on one of the buttons was also required.