Fingerprint Logon Manager program
I remove the program by chance how I get it back?
Visit the support Web site of the manufacturer of your PC and search for your PC model and in the download section, find and download and install it.
Tags: Windows
Similar Questions
-
How can I change the fingerprint logon?
I had a local guru clean my Dell laptop. He called and said he was not able to connect and I gave him the password to get connected. When I took the computer he told me that he had changed the fingerprints to a fingerprint logon. I want to erase her and put my own printing.
Hey O J Collins,.
You will first need to contact the same person who you contacted to connect to the computer.
In addition, you can consult the following articles that might help you change the way in which you want to connect.
You cannot connect to a computer by using the fingerprint reader
-
Fingerprint logon Windows 8 for HP 6560 b
Hello
I try to configure the fingerprint logon to my HP 6560 b with windows 8.
There is no software on the HP site for windows for fingerprints digital so I tried the software for w7 x 64.
Installation and configuration is no problem, but after restarting my 6560 b to test the will of the blue screen of FLICKR and I cannot connect or try to fingerprints.
Is this a known issue? is there another way to get logon windows 8 fingerprint for HP 6560 b?
THX
Hello:
My recommendation is to use the fingerprints W8 driver (if you only have a W7 driver installed) and W8 software protect security of 6570b Manager tools.
-
Satellite A300 - stopped to ask fingerprint logon
Hello
I have a Toshiba A300 with Windows Vista on what I bought late last year.
Everything worked very well and in order until 2 months ago, when he stopped suddenly to ask fingerprint logon.I don't really know what caused it to stop working. Could someone help please?
Try to update the software of fingerprints. I think that her place at v2.5.29 (Authentec).
Also have a look in the settings of Authentec fingerprint, make sure that blow on Windows logon is enabled.
-
Biometric fingerprint logon is not available after Windows update
Hello
I have a HP ProBook 4540 S with Windows 8 (not Pro) preinstalled. I activated the fingerprint reader to log in to the biometric applet when I got it, and it worked very well.
Recently, after a scheduled Windows Update, he stopped to offer the option of connecting biometric fingerprints. I opened the HP security settings and the settings of fingerprints are still all there. Sliding my finger on the scanner brings up the settings as well. So the device works and the OS recogizes it. However, all the instructions I read that indicate how to enable fingerprint scanning for connection say go to the control panel and find the applet biometric parameters. There is no applet in my control panel which has the word 'Biometrics' in there.
So I'm at a loss on how to reactivate the connection of fingerprint scan. Can anyone help?
Thank you
Mark
OK, I reinstalled these items, but the function does not appear. However, I found another clue published somewhere in the forum suggesting to go to HP ProtectTools > Administration > administration Console > increase the security of the system. From there, I checked "Windows logon security" and which brought the fingerprint logon.
-
Original title: HELP! Problem 'open with '.
I also have a problem of 'Open with', that has happened before. I open a file with the Microsoft Office Picture Manager program. Now I can not escape and it's the tilt all my documents of the image. Even the new emails are now coming this way. How can I get rid of this or the reverse?
Hi Patti Gunderlock,
· You receive an error message or error code?
Follow the suggestions below for a possible solution:
Method 1: Follow the steps in the following article, and check, if that helps.
How to change or choose the program that starts when you double-click a file in Windows XP
http://support.Microsoft.com/kb/307859
Method 2: If the method above is not enough, then you can follow the steps described in the article and check.
When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
http://support.Microsoft.com/kb/950505
Let us know if that helps.
-
Need a list of disk management programs start.
I need a list of startup disk management programs. auto\manual\delayed automatic, please
Hello
See Autoruns:
How to troubleshoot a problem by performing a clean boot in Windows Vista
http://support.Microsoft.com/kb/929135
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.htmlAutoruns - free - see what programs are configured so that it starts automatically when
your system boots and you connect. Autoruns also shows you the complete list of the registry
and where applications can configure Auto-start for the files settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
Cannot download file in Adobe. Every time I try to download image manager program appears
I try to download a presentation, but everytime I try instead of the program from adobe, or microsoft word, the photo manager program is open and I can not locate the Conference. I need to download and conpy the text, but I'm having a problem to do so. Please help
Hello
· What type of file you are downloading, it's an adobe document or a word document?
· This only happens with this file or all the files you download?
· What happens when you try to open the file in the Adobe document or word after you have saved the file on the desktop?
· What site Web you try o download the file?
· Is adobe reader or word document installed on the system?
Step 1:
To view the PDFs on the system, you should have Adobe reader installed on your system, if you do not have Adobe installed on the system, then, I suggest you install on the system from the link below.
http://www.Adobe.com/downloads/
Step 2:
Change to the point of Adobe's PDF format file associations. Click on the link below.
Change defaults to programsWindows
http://Windows.Microsoft.com/en-us/Windows-Vista/change-which-programs-Windows-uses-by-default
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
GPS Garmin 'Trip & Waypoint Manager' program chanage of Windows XP to Windows 7
GPS Garmin 'Trip & Waypoint Manager' program used with Windows XP works is no longer with my new Windows 7.
Is there a solution for this problem
Hello
Thanks for posting your question in the Microsoft Community Forum.
According the information, you are facing problem to start the Gps Garmin 'Trip & Waypoint Manager' program used with Windows XP in Windows 7.
It seems that the program is not compatible with Windows 7.
For more information, see the link:
GPS Garmin Windows 7 compatibility
You try to install and run the program in Windows XP compatibility mode and check if it helps.
Make older programs in this version of Windows
You can also check with the support of Garmin to download and install the version that is compatible with Windows 7.
Hope that the information provided is useful.
Using the windows-related issues feel free to post on the Microsoft Community Forum.
-
Original title: problems of Windows 8
I have Windows 7 (32 bit) and Windows 8 (64-bit) is installed in a dual boot. I tried to extend the partition of Windows 8 with a third party partition manager. Subsequently, I restarted after having learned so much.
Later, the first thing I saw was that the locked screen image is replaced by a blue color. Photos of the user are also missing. Once connected, it took a long time for windows everything ready, and I'm stuck in a black screen with the mouse pointer.
I entered in Safe Mode and found that the drive for Windows 8 letter has been changed (C: = Windows 7;) D: = recovery partition; E: = Windows 8, new drive letter; F: = Windows 8, old drive letter), I tried to change the drive letter, but it does not work.
Partition of Windows 7 works well (it is what I currently use to put this problem), and I can access the data in the partition of Windows 8. I tried the methods of different repair without result (such as chkdsk and sfc/scannow).
Can someone help me with this please? Any help would be appreciated.
Hello
I understand that you have a problem of black screen with Windows 8 and the drive letter for the partition of Windows 8 is also changed. This problem is due to the use of the third party partition manager program because it affects the registry files and causes the instability of the system.
Try to run auto repair from the Windows recovery environment and check if that helps.
Method 1: start the recovery environment with installation of Windows 8 media.
It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system.
Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer.
(a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
(b) select the good time and the type of keyboard .
(c) click on repair your computer in the lower left corner.
(d) select Troubleshooting to Choose an option screen.
(e) click on advanced options in Troubleshooting screen.
(f) click Auto repair of Advanced Options screen.
(g) following, choose the operating system by clicking on its button.
(h) Windows 8 will be looking for problems on the hard drives and verify that all required files are intact.
Method 2: Run the restoration of the system of the Advanced Options screen.
System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous stateFollow these steps:
(a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any.
(b) select the good time and the type of keyboard .
(c) click on repair your computer in the lower left corner.
(d) select Troubleshooting from the Choose an option screen.
(e) click on advanced options in Troubleshooting screen.
(f) select System restore.
After the system restore your documents and files will always remain to their previous state.
If you do not install Windows 8 media, I suggest you connect to any other computer and create a floppy disk to install Windows 8. Using this disk, you can run the troubleshooting provided methods.
How to create the installation media for a PC refresh or reset:http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media
You can also try the same steps using the bootable USB key. You must select USB as the first boot to the BIOS device.
Note: Microsoft don't recommend any third-party partition manager program because it corrupts the registry files and cause the instability of the system.
Write to us if you're still having problems. We will help you.
Kind regards
-
ESSO Logon Manager works only with FireFox 3.5
Hello
I uses Oracle ESSO Logon Manager (v.10.1.410), but it does not detect my browser FireFox 3.5.3.
I am not able to connect using Connection Manager to one of the web sites while browsing using Firefox 3.5 +.
Kind regards
S.Vasanth Kumar.
Published by: vasanth.s.kumar on October 6, 2009 12:37Hello
This is planned for a future version of the connection manager. Currently 3.0 is the latest version supported.
There is a demand for improvement (8652660) connected to Firefox 3.5 supportConcerning
-
automatic invoice management program
Hello
I have a requirement I need to submit pl/sql automatic invoice management program.
Our process is in 3 steps
procedure 1 load invoices in table scene
2 charge process invoices from sales to Interafce table ra_interface_lines_all
3. start the auto invoice management program
the 3 steps above were 3 two concurrent programs. Now we want to merge all these three in 1 and also we include a simultaneous program to more (4th).
4th concureent program must print invoices that are loaded into oracle AR in step 3.
I tried to do, but the thing is when I submit step 3 auto invoice master program it resubmits the auto invoice import program.
So when I try to print invoices based on step 3 request id I couldn't do that, because the Bills are loaded in oracle AR with automotive invoice import program application IDs.
My question is can I submit the import auto invoice program directly or y at - it another way to do this?
Please help me.
Thank you
MHow do you call programs (step 1-4)? I guess the load to the staging in the RA interface can be made in only 1 concurrent program?
In any case, have you tried to set up an application set for it? Overall demand, define your process 1-4 and have them bound to order that this fails 1, 2 and 3 will not be started... and so on... Here, you can also set to wait for the completion of the Autoinvoice programs (laid)... The last part would be invoices invoice print (New/Selected)... (identify the settings on how you want things to run - in this scenario, I see no reason why you need the ID of the request of autoinvoice.)
Kind regards...
-
Hello
We have oracle 10g database system.
We need database management program to create databese, table, user, to put in place a procedure stored, to run the query etc.
Where can I download the software like this?
Thank you.SQL Developer: http://www.oracle.com/technology/software/products/sql/index.html
DB management: Oracle Enterprise Manager -
Portege M700-106: unable to start the task manager & programs after Vista sleep
Hello
In fact I am facing problem like below...
Configuration: Portege M700-106 with upgrades (Hynix Kingston 4 GB, WD Scorpio 320 GB with jumper default config doesn't = no jumper)
Reinstalled system from Toshiba DVD recovery, all updates possible on web too.However, when I wake Vista from the suspense Task Manager I think I can't start (continuous report) some programs (e.g. ThunderbirdPortable of SDHC), all other programs works well enough.
Anyone can know the reason, solution for this?
Thanks for help
Staszek
Hello
As far as I understand, you are not able to use some 3rd party applications after the awakening of Eve Vista but other applications running ok only software Thunderbird Portable to the SDHC card.
Well, I have come to the conclusion that the card reader can hangs after the awakening of the stand by mode or the ThunderbirdPortable should be repeated. Probably it s not a problem of Vista, but question ThunderbirdPortable.
Have you tried to search if this is a known issue with this software?I would recommend this review!
-
Tecra S5 - fingerprint logon stopped working when I chanaged password
I have a laptop Toshiba Tecra S5 and I use logon of fingerprints from the beginning.
It stopped working when I have chanaged my password.
Fingerprints are associated with the old password.I looked everywhere to find where to change it without success.
Can someone point me in a right direction?
Thanx
Hello
I think you should remove the old prints and need to configure this new.
As far as I know, you can use the new password to connect.
Then access the setting of Trusuite software, remove old prints and reconfigure using new digital prints.Theoretically, this should work.
Maybe you are looking for
-
Pavilion 15n005tx: ralink rt3290
I need driver for ralink rt3290, driver of my laptop does not way direct link to download this driver.
-
Software driver and C4280 install for Windows 7 error
Try to download the latest version of the software and drivers for the HP Photosmart C4280 printer. The download seems to fill correctly, but I get the following during the installation process. Help! Process stops with "" fatal error during instal
-
I have no idea how to fix this and right now I can't connect to xbox live because 2 days ago from microsoft came out with a new update system and I cannot download the
-
Need new video/graphics than available games PC card
Hi, I'm looking for a new graphics/video card that would be fine PC games. Preferably something that isn't crazy expensive. I have a Dell Inspiron 530 computer. Thanks for any help.
-
Problem with the start menu of windows 8.
So my type of computer is Windows PC. My windows 8 Start menu automatically brings me too my "Apps". Then I have to click an arrow button and it brings me to 'start '. I can't find a way to 'lock or PIN' from the menu 'Start '. So, whenever I push th