Need a list of disk management programs start.
I need a list of startup disk management programs. auto\manual\delayed automatic, please
Hello See Autoruns: How to troubleshoot a problem by performing a clean boot in Windows Vista Autoruns - free - see what programs are configured so that it starts automatically when I hope this helps. Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it=""> Tags: Windows Disk Manager (disk C or prolong the increase space) Ideas: need help useful in disk management. I had 3 partition on my drive hard C, D, and F, then I miss the space on drive C (hand) and then I deleted drive (volum) F. NOW; can someone to me how add the space unallocated to drive c. Hello Be careful because you don't want to change your recovery partition, where system manufacturer How to resize a partition on Windows Vista
How delete and extend a Partition with Vista disk management Change or resize Partition (NTFS, FAT or FAT32) size in Windows Vista How to resize, extend, reduce, remove, Merge Partitions in Vista. I hope this helps. Disk management does not allow me to create the simple volume I have a 60 GB SSD and a 1 TB drive. I reinstalled Windows 7 and partitioned md SSD for the OS. I want to use my hard drive for storage. How can I fix it? Go to http://www.easeus.com and download free Easeus Partition Master. It is much easier to use and works when the Windows disk management program is not. Good luck. I know how to stop most of the programs running in the back ground by using the Task Manager and the process tab. But, I click "Show processes from all users" list is double what it was. I need a list of what I can finish process without going through the computer off and restart or with on dreaded blue screen. So I ask if anyone has a list of processes that are sure to stop? Thanks in advance, Frankster195 Hi Frankster 195, Welcome to Vista forums. You can try to perform a clean boot. Check the mentioned below of items. How to perform a clean boot procedure to determine if background programs are interfering with a game or a program that you currently use http://support.Microsoft.com/kb/331796 How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7 http://support.Microsoft.com/default.aspx/KB/929135 Hope this information is useful. Thanks and regards. Thahaseena M I need Recovery Manager or start the recovery within Windows Stupid boring history: I work in a local store of pawn and we also miss a place ebay store. Some people are not the brightest. We have a HP Pavilion A6400Z that origionally came with Vista Home Basic. Apparently at some point they thought it was too slow, so they took an acer recovery disk and put XP on there. There is no drivers / whatnot. I put vista Home premium on there to see how he could play, and it works well. The recovery partition is surprisingly intact, with all of the HP Preload files there. What I do: Only I have a disk of vista Home premium and want to the factory restore using the recovery partition that is always there. Pressing F11 at startup is not in recovery mode, I need to get the software HP Recovery Manager, or find a file on the partition recovery that will do it for me. Thank you in advance! By pressing F11 on HP Invent blue screen, as soon as it presents, should start the Recovery Manager. If it isn't, there are two other ways to get it started. (1) try to start in Safe Mode, tapping F8 (not now) after the blue HP screen. Then go on the recovery partition and mark it as active in the "disk management", then restart. Back in safe mode, and it must ask that the installation of Windows you want. If it does not order them HERErecovery Kit. You can see several items that apply but do not require the "Vista Business". 5092-7398 or 5092-7399 should work. Original title: problems of Windows 8 I have Windows 7 (32 bit) and Windows 8 (64-bit) is installed in a dual boot. I tried to extend the partition of Windows 8 with a third party partition manager. Subsequently, I restarted after having learned so much. Later, the first thing I saw was that the locked screen image is replaced by a blue color. Photos of the user are also missing. Once connected, it took a long time for windows everything ready, and I'm stuck in a black screen with the mouse pointer. I entered in Safe Mode and found that the drive for Windows 8 letter has been changed (C: = Windows 7;) D: = recovery partition; E: = Windows 8, new drive letter; F: = Windows 8, old drive letter), I tried to change the drive letter, but it does not work. Partition of Windows 7 works well (it is what I currently use to put this problem), and I can access the data in the partition of Windows 8. I tried the methods of different repair without result (such as chkdsk and sfc/scannow). Can someone help me with this please? Any help would be appreciated. Hello I understand that you have a problem of black screen with Windows 8 and the drive letter for the partition of Windows 8 is also changed. This problem is due to the use of the third party partition manager program because it affects the registry files and causes the instability of the system. Try to run auto repair from the Windows recovery environment and check if that helps. Method 1: start the recovery environment with installation of Windows 8 media. It is another way to boot the PC and launch recovery tools when something goes wrong with the operating system. Please follow the steps below. Insert the DVD to install Windows 8 on DVD-ROM and restart your computer. (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any. (b) select the good time and the type of keyboard . (c) click on repair your computer in the lower left corner. (d) select Troubleshooting to Choose an option screen. (e) click on advanced options in Troubleshooting screen. (f) click Auto repair of Advanced Options screen. (g) following, choose the operating system by clicking on its button. (h) Windows 8 will be looking for problems on the hard drives and verify that all required files are intact. Follow these steps: (a) once you start your computer by using the Windows DVD or the system repair disc, a black screen is displayed with the gray text "Press any key to boot from CD or DVD". Press a button on any. (b) select the good time and the type of keyboard . (c) click on repair your computer in the lower left corner.
(d) select Troubleshooting from the Choose an option screen. (e) click on advanced options in Troubleshooting screen. (f) select System restore. After the system restore your documents and files will always remain to their previous state. If you do not install Windows 8 media, I suggest you connect to any other computer and create a floppy disk to install Windows 8. Using this disk, you can run the troubleshooting provided methods. http://Windows.Microsoft.com/en-us/Windows-8/create-reset-refresh-media You can also try the same steps using the bootable USB key. You must select USB as the first boot to the BIOS device.
Note: Microsoft don't recommend any third-party partition manager program because it corrupts the registry files and cause the instability of the system. Write to us if you're still having problems. We will help you. Kind regards Mac Disk Manager Pro 2009 does not start I have Mac Pro 4.1 2.93 Quad-cord. I look on the net for a solution to the question I had, without success. I recently updated my graphics card to an NVIDIA GTX 960. I connected through HDMI on my monitor. Now, with my old factory graphic card I could just hold the option key to bring up start between 10.11.3 OS and Windows 10 disk management. Now (with the new graphics card), when I take the key Option, it monitor does not turn. But I hear my Mac Pro work. If I let him start normally, without anything hold the monitor will stay a 'sleep' mode until load OSX. Could I get some ideas what could be the problem? Of course, it looks like you have a PC (not not flashed with Apple EFI). A card flashed not Apple will not display anything until loading drivers that is right in front of the login screen. This means that you can not use special startups as Option (Boot Manager) or recovery. 'Logical disk manager' found at the start of Win xp all the time Hello, all the... I get a 'logical disk manager' found to boot Win xp message all the time on start or restart... 100% of the time. I can use all the facilities of the computer from the disk management, but I' like this message to go. It is anotebook with a connected external USB drive sometimes. I also use an ethernet to usb tot internet connectivity device. Would appreciate a solution. Hello I suggest you to refer to the following Microsoft article and check if it helps. The logical disk Manager Administrative Service hangs as it begins: http://support.Microsoft.com/kb/307309 Warning: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 ) Hope the information is useful. I got a new hard drive in my computer and the old a subscribed. I then had to reinstall Windows XP Pro. In disk management, it shows only a single hard drive and it's C, but it lists the size than what my old drive was that I took out. The new shows of unallocated hard disk without a drive letter and has a black bar above it. How do I show my new hard drive that is 1 TB instead of one that was a 250 GB is not yet in my computer. Hi Reta, · The drive appears like 250 GB even if it's a terabyte? · Is the remaining 750Go showing as unallocated disk space? If this is the case, you can refer to this article on how to use disk management in Windows XP: How to use disk management to configure dynamic disks in Windows XP You can follow the directions to extend a Simple Volume so that your 250 GB turns into a single terabyte. I wanted to delete some files to my sd card. Deletion was not available because the files have been write protected. This is what I found and need help; This sd card in my computer as drive H: properties show that the - STORAGE THAWED and the FILE SYSTEM - TYPE FAT32. First of all, I tried to restore the site, it did not work because the disk is write protected. I have unlocked next to sd Card reader and tried again. This did not help. I then looked at disk management and removable disk 1 3.6 GB read-only (h :)) Primary Partition.) I don't know how it happened and I want to be able to use the sd card, so I need help please. The card SD gives the same error if inserted in another computer? The manufacturer of the card provides a utility to try to wipe/format cards capricious? The type of error that you describe usually happens when a card is defective or failed and usually nothing you can do will remedy the situation.
I wanted to delete some files to my sd card. Deletion was not available because the files have been write protected. This is what I found and need help; This sd card in my computer as drive H: properties show that the - STORAGE THAWED and the FILE SYSTEM - TYPE FAT32. First of all, I tried to restore the site, it did not work because the disk is write protected. I have unlocked next to sd Card reader and tried again. This did not help. I then looked at disk management and removable disk 1 3.6 GB read-only (h :)) Primary Partition.) I don't know how it happened and I want to be able to use the sd card, so I need help please. Need help installing a Raid0 in Win7Pro disk management. I had a raid but only one drive died and I'm trying to get a new will raid0. I have an SSD for the boot drive and two new Sata Seagate 3TO disks for the raid. They are installed and the Intell Rapid Storage Technology Software sees them and I used that to create a new switched-on and both drives are chosen as members. Now I go to disk management in Windows, but I forgot what to do now. Initialize disks, make them dynamic with GPT partitions and choose them as striped readers? Just not sure of the procedure. I have a motherboard Asus P9X79 WS with UEF Bios. Personally, after seeing the problems, I use raid, except that using a third party hardware raid card and for redundancy, I more than two disks, at least one more of a resumption of the fall-over A decent raid card costs about $500 RAID 0 is a striped raid configuration Help manual Asus has instructions I don't know about whether the raid controller you are using supports a resumption of the fall-over with additional disks VCB & backup exec 12.5 w / vmware option - list of disks in disk management Hello I have an EMC SAN (CX3-20 and CX4-120) and I welcomed a LUN to be shared between in the backup server. Backup server has VCB, backup exec 12.5 This is a normal behavior? 1 - when I click on disk management in the computer management and then the LUNS which I shared appears as a partition 'unknown '. 2. when I right click it now allows me to delete. When I remove, it basically caused me a lot of problems on my esx environment. My other question is: Is it away so that I can still share this LUN so that my Backup Exec + VCB can always make backups, but this lun are not not in computer management? I'm just afraid something would go wrong and the LUNS can be accidentally deleted (which will create the biggest problem for me in my production environment) Please find attached the screenshot. Best, Ahmed Yes (if you mean State disc 4). André Why my recovery disk creation program cancels after 50% of creating files I'm doing a recovery disc for my Compaq laptop. It has Vista OS. I use the recovery disc creation program. The program starts and shows that it is creating files. When the indicator progress says 50%, the program seems to stop, and after a few minutes, I get a message say that the process is canceled. What can I do to create a recovery disk? Hello This recovery process belongs to HP Compaq, not Microsoft. They are the ones to ask about problems when you attempt to make the recovery of the disks. http://WWW8.HP.com/us/en/contact-HP/contact.html Or you could ask in their Forums: Here is the HP Compaq information on how to make recovery disks:
See you soon. How can I delete a drive letter that does not appear in disk management? After updating my firmware of dvd writer has been assigned a new drive letter (j), however the old letter (f) always watch under 'my computer' but does not appear in disk management. How can I remove or remove (f) so that I can reassign my dvd burner? Windows xp sp3. Thank you- Try to run, type: cmd cmd type: diskpart in diskpart, type: list disk Type: HELP to handle the letters. Also, technical material, highlight the hardware, R.click, select listed "uninstall." for all that is needed, w/o reboot pc, once thru, output, pc shutdown. Change the connection on the material to another (moving pins connector thereon if necessary, slave/master), once through, start pc. XP will reinstall it at startup. Original title: Media Center 2005 Edition I was watching TV using Media Center on my PC HP Media Center m7367c PC (running Windows XP Professional Version 5.1.2600 Service Pack 3) when the power went off. Now whenever I try to watch live TV, the program starts normally but freezes as soon as the audio starts. The audio works fine, but no picture, the small rotating circle of progress hangs and the screen is frozen. I can click the X (close Box) and the program closes. I expect there are only one or two corrupt files that need to be cleaned or replaced. HP support is to use recovery discs to clear the system and return it to the original configuration. Given all the software, data and updates, I have to restore, I don't want to go down this road. I tried running SFC/scannow but Windows XP system discs are needed and the PC vendors ceased to provide systems with their PC discs there are many moons. I bought Windows XP Professional with Service Pack 3, but he came on one drive and requests SFC disk #3 while parsing. I go back to the original driver TV tuner and then updated to the more recent but not joy. I think that the problem is with a program or file Media Center. Now when I try to configure the TV signal my cable box is recognized and then as soon as the audio lights, MCE 2005 hangs and the tiny TV screen remains black. I expect a file Media Center must be cleaned or reset but before I realize FUBAR I thought that he better come on this Microsoft forum and see if someone who knows what they are doing can provide the solution. Hi, Rudy386MS, Sorry for the late reply. Do you have the problem solved? If Sfc/scannow solicits the disks, then you have corrupt or missing files whose analysis cannot replace or repair. The alternative is a complete recovery of Windows. Open the control panel and select Media Center Click on uninstall Select the repair option Click next Click Finish when you are prompted See if that helps. If not, then the recovery process will be needed Startup of HP systems to screen recovery (repair) when you reboot and start typing the F11 key. According to me, that it gives you the choice to 'Fix' that leaves your files intact or 'Recover' system that will put you back to 'out of the box' condition. There is a Recovery Manager in the folder all the HP programs which includes Disc Creator. You can create your own recovery discs. I suggest using DVD instead of CD - R. They allow more memory space. I don't want to lose the mail before today, help keep some of the old mail. It seems that previous post to today has disappeared. I don't want to lose the old messages. How do I keep it? Error 0 x 80280803 - the BitLocker TPM Hi all I had the problem by adding the BitLocker protection key so that I have read the hard drive. Now, when I try to encrypt again, I encounter the error below. Error 0 x 80280803 The command I use is cscript manage - bde.wsf - on c: and the messag the glass is not flush with my e420s I just got a new e420s and it works well, but I noticed that glass on the kind of bumps to the top screen and I have to push it back into place. This would replace Lenovo? or fix this somehow? I got this phone 5 days ago. SyncToy 2.1 suddenly don't synchronize my EFS encrypted files I have just upgraded to Windows 7 Ultimate (64 bit) on my laptop and desktop. Until recently, I used Synctoy 2.0 on my laptop to synchronize the files with my office. On my laptop, the files are encrypted using EFS in Windows; While my desktop files Hello Recently, I updated my momentics 10.3 10.2 momentics SDK. Now, I work with a database to get the data from database, but I don't get all the data from database. QSqlQuery DBUtil::getTitles(QString catgName) { QString name; QString query = "SELE
http://support.Microsoft.com/kb/929135
How to check and change Vista startup programs
http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html
your system boots and you connect. Autoruns also shows you the complete list of the registry
and where applications can configure Auto-start for the files settings.
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxSimilar Questions
Put your recovered files (if you have), Restore Points, and other routine functions.
http://www.vistarewired.com/2007/02/16/how-to-resize-a-partition-in-Windows-Vista
http://wiki.answers.com/Q/How_do_you_remove_a_partition_on_your_hard_drive
http://www.mydigitallife.info/2006/11/27/change-or-resize-partition-NTFS-FAT-or-FAT32-size-in-Windows-Vista/
http://www.WinVistaClub.com/T11.html
Rob - bicycle - Mark Twain said it is good.
So now I have the SSD as my drive (C :) with only the OS and installed programs important. When I go to disk management, it shows my disk 0 looking fine, then it shows my disc 1 (my 1 TB HHD) empty, not even let me create a simple volume.
Whenever I do a right-click on disk 1 I only get the option "change drive letters and paths...» »
Microsoft Answers Support Engineer.
Visit our Microsoft answers feedback Forum and let us know what you think.
Method 2: Run the restoration of the system of the Advanced Options screen.
System Restore to restore your computer to a previous state, quickly and easily without losing any of your files and personal settings. Sometimes when you install programs or drivers, they can affect some system settings and prevent other programs to function properly. You can use system restore to restore these settings to their previous state
How to create the installation media for a PC refresh or reset:
and enter the recovery in the field of research. Select Recovery Manager in the list to open the HP Recovery Manager window. Allow the action to proceed, if you are prompted. , all programs , Recovery Manager , and then Recovery Manager . Allow the action to proceed, if you are prompted.
Maybe you are looking for