Fingerprint reader dell vostro 3750 is not detected after reinstalling windows 7

Similar Questions

• B50-30 AIO - SD card reader not detected after upgrading Windows 10. Solved.

  AIO B50-30 (F0AU002US) SD card reader was not detected after that I upgraded to Windows 10. I have installed all the appropriate drivers found on the page for assistance with on Lenovo a fix. Device PCI Device Manager had no driver.

  I installed the driver below and my problem has been fixed.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  I hope this helps someone else?

  Mod edit: System model added to the front of the subject line to improve visibility / clarity

  Thank you for the help with the Forum. I find the help I need with my new Lenovo.

• HP Dm1 3025DX network controller drivers are not installed after reinstalling windows

  Hello

  I have a laptop HP Dm1-3025DX Windows 7 home premium 64 GB and after reinstall windows from the network controller and Ethernet controller both say the drivers for the device are not installed. I can't understand how to solve this problem or download either. I don't have access to the internet on this computer so I use another computer for this post, and I'll have to use this computer to download drivers also. Help, please!

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-100668-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-102448-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-90955-1&cc=us&DLC=en&LC=en&OS=4063&product=5094553&sw_lang=

  Judging people, see if they install.

• (Redirected) Dell Vostro 1510 does not restart after the replacement motherboard (CPU the question!)

  Dear,

  I have a problem with my laptop (dell vostro 1510). For the second time my screen went completely black. I couldn't see anything, but the computer was not working. I assumed it was for the same reason as the first time (burnt video card). I have replace it with it and when I try to start the laptop I just get three led among that flashes on the left. It is not go further and I don't have access to the bios. The diagnostic led codes say it is a problem with the processor. How can I test if the processor work? For me, it's weird with the old motherboard, it began. I also tried to reset the CPU on a different time slot. I don't know what to try anymore.

  If you have any suggestions please let me know

  Have a nice day

  Gian

  As you have a laptop, better make this laptop in the computer Forum post here:

  http://en.community.Dell.com/support-forums/laptop/default.aspx

  Bev.

• Satellite A500 - 18Q - battery not detected after installing Windows

  I have Satelite A500 - 18Q (PSAR3E) and Windows 7 32 bit

  Windows is not detected battery. What should I install to the Windows recordnize the battery?

  Hi marnin,.

  Have you installed Windows Toshiba Recovery disk or normal drive of Microsoft?

  Normally for the battery you n t need an additional driver. He will be recognized automatically.

  Can you charge the battery when the laptop is turned off?

• [E530] GPU NVidia not detected after installing Windows 10

  Hello.

  I have upgraded to Windows 10 a month but noticed now that NVidia gpu is not detected. I tried to disable and re-enable it in the bios but nothing helped. Is - this common problem (I guess not, since I have not found similar positions) or is there something wrong with my hardware or something? What should I do?

  Well, I installed Win 10 once again and now it seems to work.

• WIFI device not detected after installing Windows updates.

  Original title: WiFi stops working when loading Windows (Win7).

  After that the last series of Win7 update is more my Wi - Fi works.

  My computer is the only one in the affected House. Wi - Fi is on (the radio light is on) when you start up loads of Windows, and then he went. More my factory installed Atheros wireless network card is no longer visible in the device, only the Ju Fast Ethenet controller Marvell Manager. I have re-installed the Atheros driver in the hope that the system would then find the device. No luck. Even the F8 key is operable, so using the FN + F8 key to activate the Wi - Fi is a bust.

  We know that the camera is good, but Windows doesn't see a reason any. This seems to be a matter of Win7 and not a hardware problem.

  • Please let know us if there is a FIX to this problem - I spent the last 4 days of research on this and I'm not alone.
  • I can re - install Win7 or y at - it a patch that I can use? With the help of a cable Ethernet is well when you're used to a Wi - Fi connection!

  & Devices:

  Toshiba Satellite P305D-S8818

  Atheros AR5BXB63

  Hi CDanahy,

  1. What are the updates recently installed?

  How to find the number of update:

  a. click Start, type windows update and press enter

  (b) in the left pane, click view update history and find the updates recently installed.

  2. are there any yellow listed under network adapters, Device Managerexclamation?

  To check:

  a. click Start, type devmgmt.msc and press enter

  b. expand the network adapters and make sure that the exclamation points.

  Method 1: Run the Microsoft fixit

  See the following site:

  Hardware devices do not work or are not detected in Windows

  http://support.microsoft.com/mats/hardware_device_problems/en-us.

  Method 2: Disable any security software

  See the following site:

  Disable the anti-virus software

  http://windows.microsoft.com/en-us/windows7/Disable-antivirus-software.

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 3: Clean boot

  See the following site:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.microsoft.com/kb/929135.

  Note: to set the computer back to start normally, use the step 7 in the same link.

  Note: If in case you are connected through a wireless connection and then when you start the System Configuration utility to perform the clean boot, click Startup and Services tab one time and check see topic wireless are turned on (Enabled).

   

  I would say as you to see the site mentioned below:

  How can I troubleshoot network card?

  http://windows.microsoft.com/en-US/windows7/fix-network-adapter-problems.

• I get the message "Windows is not genuine" after reinstalling windows

  4 years ago, I bought my laptop (HP ProBook s 4310) with Windows 7 pre-installed, without any disk. A month ago, I formatted my HDD and reinstalled windows. First of all, I found my key windows (using "magical jelly bean"), then downloaded an iso of Windows 7 from Digital River, installed and used my previous key.

  Now, I get this non-genuine message. Since I initially bought windows and that the seller does not gives me any drive, I think not that I did something wrong. Someone knows a solution to this problem?

  Option 1:

  If the COA sticker is damaged, you must use the recovery partition to reinstall Windows 7, it will be exempt from the need to use the product key to activate your installation of Windows 7.

  Option 2:

  If your recovery partition is not available or damaged, you must contact the manufacturer of your computer, and request that a defined recovery disk you can use to reinstall Windows 7. They could practice a small shipping and handling. This will exempt the need to also use the product key.

  Option 3:

  If neither options 1 or 2 is possible, then you will need to invest in a new license of full version of detail.

  New computers coming often pre-installed with Windows 7 have what is called a recovery partition. This is used to reinstall an operating system in the case of a system failure. To access it, you need to start when you start your computer by pressing a function key. This can be either F1, F2, F9, F10, F11, F12 key DEL or tab. See the manual that came with your PC for instructions on how to reinstall Windows.

  This is how the recovery partition is accessible to most popular brands...

  For Dell, press F8 on the keyboard until the Advanced Boot Options menu appears on the screen.

  For HP, press F11 directly after switching on the device

  For LG, press F11 directly after switching on the device

  For Toshiba, press and hold "0" BEFORE and during the power upward

  For Acer, press and hold ALT + F10, as soon as you see the logo

  For Asus, press F9, as soon as you see the Asus logo.

  For Samsung, press F4 to the power upward...

  For Fujitsu, press the F8 key directly after the power

  Advent, restart your computer. Then, press F10 repeatedly until the message "Starting system recovery"

  Sony VAIO, reboot and press "F8" or "F10" repeatedly until the screen "Advanced Boot Options".

• Windows Update does not work after reinstalling Windows XP due to the infection by the virus

  Hello

  I have a system of Windows XP with IE8.

  I can't get Windows Update to work. Just crossed another reinstall due to a virus problem and trying to get my operating system again.

  Any help would be appreciated.

  Thank you

  We need to know what type of CPU you have. Follow the instructions in Tricky again. You will see a window that looks like this:

  
  http://KB.Epson-Europe.com/PF/12/WebFiles/article%20Images/operating%20Systems/win%20XP%20-%202000/System_Properties_XP.jpg
  I suspect you have an AMD processor. If so, please read the following:
  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  Microsoft Windows XP SP3 Upgrade utility for systems with AMD processors.

• Business app does not work after reinstalling Windows XP

  Original title: program programs application Applications compatibility

  I have an application that runs on the client computer with XP.  When I run the application, it will be all first authenticates the user by collecting the ID of the system that must be registered with the key to series given by the owner.  Once the registration takes place, then only, the application should open. Recently, I had to reinstall XP Pro (SP3) on my PC. Now, the same application when it is running on my PC with XP or laptop with Windows 8 with compatibility to XP, it does not jump the authentication window, instead, directly opens the application.
  Without authentication, the application should not open. What is the solution.

  Hi Santosh,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=windowsxpitpro

  I hope this helps.

• my keyboard does not work after reinstalling windows xp home addidion, it workrd for a short time but seemed to stop when I was in a session of powerpoint.

  When I look in hardware/keyboards, it confirms that a keyboard is connected, keyboard Standard.

  I susspect keyboard is u/s Strawberry is not another computer to try out it.

  Its aps2 not a usb connection.

  ?

  Hello
  It sounds like you need to reinstall the drivers for this keyboard. It is likely that when you reinstalled Windows, all the old drivers have disappeared as well. So, I recommend two things.

  First, visit the website of your computer manufacturer and update all the drivers. For example, if you have an HP computer, go to the HP site and find your specific computer it. Then download all the drivers that have been updated for the PC.

  Secondly, you may need to download the drivers for this specific keyboard. In this case, you will do the same as above. Go to the website of the factory (on the keyboard) and find this specific model. Then download the drivers

  I hope this helps. Just reply to the results.

• Sound not working after reinstalling Windows XP

  Hello!! I recently formatted my hard drive and reinstalled Windows XP. I get not all sounds, even the normal beeps and boops and not even my moniter.

  When I look inside Start--> Panel--> sounds and Audio devices, it says I have no audio device.

  I checked my set of external speakers, and they seem to be plugged into the computer and power (the light on East)

  Any suggestions?

  Hello Merry_Girl,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to the XP community, and would be better suited to the XP community.  Please visit the link below to find a community that will provide the support you want.

  Windows XP newsgroup community

  Try installing the drivers from the manufactures website.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Pavilion Dv7-3110ea: Dv7-3110ea wifi not working after reinstalling windows

  Hello.  I reinstaled windows on my laptop and now the wifi does not work... I cannot turn on wifi... only bluetooth...  I think I need to reinstall the drivers, but I don't know where I can find them.

  Any help please?

  I have had no problem the two wifi driver download available. I chose the download-only, without using the wizard to download from HP. See the following pictures.

  

  

• Dell Vostro 200 does not start after installing the SP2 for Windows Vista Business

  I have to keep which dates back to the system restore to get my computer on the road.  Whenever the update is installed I don't get past the first Screen Microsoft with the arrows.  Now, my computer is very slow and I have not been able to install SP2. I need very simple instructions I'm no computer expert!

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support, initially planned to end on November 26, 2009, has been extended until February 26, 2010. Availability of support chat or messaging differs depending on your location. Some questions may require that more support for which he is advanced a charge.  Go to http://support.microsoft.com/oas/default.aspx?prid=13014&gprid=582034 & select appropriate category (i.e., download problem;) Installation problem; Problems after installing a service pack). ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Battery not detected after upgrading Windows 10

  Improved my Aspire 5738 of Win 7 to 10 to win. After upgrade, no battery is detected by the laptop. I like to win 10, but if no solution is found, I'll neeed to roll back to Win 7 fast enough, or I'll be stuck with a laptop that is always running in an office environment.

  I tried the old standbys (unplugging everything, release the power button, then restart, then adding back battery), but does not work. Someone at - it any other ideas / suggestions /directions?

  Thank you!

  Please check if you can make a battery driver reset. Here are the steps: go to the currency manager. Windows with your left hand and hold and then press the key for the letter X with your right hand. Then select Design Manager in the list. Right-click on compatible ACPI Microsoft control method battery and choose uninstall. Click the ACtion tab on the top of the search window and chose any material changes. Let us know if you notice a change after following the steps above. +++ If I have been helpful, a KUDOS is to enjoy and don't forget to mark "Accept it as the Solution", the post that solved your problem. Thank you.