Sound not working after reinstalling Windows XP

Similar Questions

• my keyboard does not work after reinstalling windows xp home addidion, it workrd for a short time but seemed to stop when I was in a session of powerpoint.

  When I look in hardware/keyboards, it confirms that a keyboard is connected, keyboard Standard.

  I susspect keyboard is u/s Strawberry is not another computer to try out it.

  Its aps2 not a usb connection.

  ?

  Hello
  It sounds like you need to reinstall the drivers for this keyboard. It is likely that when you reinstalled Windows, all the old drivers have disappeared as well. So, I recommend two things.

  First, visit the website of your computer manufacturer and update all the drivers. For example, if you have an HP computer, go to the HP site and find your specific computer it. Then download all the drivers that have been updated for the PC.

  Secondly, you may need to download the drivers for this specific keyboard. In this case, you will do the same as above. Go to the website of the factory (on the keyboard) and find this specific model. Then download the drivers

  I hope this helps. Just reply to the results.

• Network connection does not work after reinstalling Windows XP.

  Original title: problems with reinstalling XP.

  I had re format and re install windows xp but now my network connection does not work.  I have no IP address, even if my router and the pc are on DHCP. Device Manager tells me that the controller Ethrnet on the motherboard has no drivers, but I can't find a driver.  Any thoughts appreciated.

  Hi John Fisher_888,.

  You can download & install the drivers for the adapter from this link & check if it helps

  http://support.Dell.com/support/downloads/devices.aspx?c=us&l=en&s=Gen&SystemID=DIM_PNT_P4_8400&OS=WW1&OSL=en

  Hope the helps of information.
  Please post back and we do know.

• Pavilion Dv7-3110ea: Dv7-3110ea wifi not working after reinstalling windows

  Hello.  I reinstaled windows on my laptop and now the wifi does not work... I cannot turn on wifi... only bluetooth...  I think I need to reinstall the drivers, but I don't know where I can find them.

  Any help please?

  I have had no problem the two wifi driver download available. I chose the download-only, without using the wizard to download from HP. See the following pictures.

  

  

• Sync does not work after reinstalling Windows 7

  Sync works great between my Windows 7 Desktop and 8.1 tablet. The PC got a clean installation of Windows this weekend and now Sync does not work. I do not receive my bookmarks/history/etc on the desktop.

  -Two versions of Firefox are updated (40.0.2)
  -J' read the troubleshooting and installation FAQs
  -I am able to sign in sync on both computers
  -For the signature, I get a popup saying that Sync will begin momentarily and an e-mail notification. Nothing happens tho.

  I suspect that the problem is related to this 'new' version of Sync. I tried to follow the FAQ "Updated to the new version of Sync", I took off the two devices, I checked both are on the latest version of Firefox, but the next step is to create a new account to sync and it doesn't let me do, I plug my email and get "account already exists." What Miss me?

  The new profile created from the clean windows installed a fusion with other devices? Check the device to see if it retains profile data.

  Have you changed the password? This would stop all data from previous synchronization that was not local.

  If you go down this road of troubleshooting, the account must be deleted first. However to prevent data loss, you can click on remove account from accounts.firefox.com and then re - sign up.

• Business app does not work after reinstalling Windows XP

  Original title: program programs application Applications compatibility

  I have an application that runs on the client computer with XP.  When I run the application, it will be all first authenticates the user by collecting the ID of the system that must be registered with the key to series given by the owner.  Once the registration takes place, then only, the application should open. Recently, I had to reinstall XP Pro (SP3) on my PC. Now, the same application when it is running on my PC with XP or laptop with Windows 8 with compatibility to XP, it does not jump the authentication window, instead, directly opens the application.
  Without authentication, the application should not open. What is the solution.

  Hi Santosh,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows XP Networking forum.

  http://social.technet.Microsoft.com/forums/Windows/en-us/home?category=windowsxpitpro

  I hope this helps.

• Satellite Pro U400-15I - wheel of sound not working after installing Windows 7

  The wheel of sound on my Satellite Pro U400 - 15l does nothing after the clean install of Windows 7 to XP pro.
  I used the recommended software update tool downloaded from Toshiba. The VolumeIndicator.exe process is running and the sound works OK - but not under the control of the wheel! The Toshiba power control is not here, but this isn't a problem.

  Any suggestion is welcome.
  Bob Sheppard

  Hello

  Have you tried to update the audio driver of your laptop? You can check from Toshiba Web site for an update:
  http://EU.computers.Toshiba-Europe.com-online decision-making supported Downloads & => Download drivers

  You may notice any yellow exclamation mark in Device Manager?

• Windows Update does not work after reinstalling Windows XP due to the infection by the virus

  Hello

  I have a system of Windows XP with IE8.

  I can't get Windows Update to work. Just crossed another reinstall due to a virus problem and trying to get my operating system again.

  Any help would be appreciated.

  Thank you

  We need to know what type of CPU you have. Follow the instructions in Tricky again. You will see a window that looks like this:

  
  http://KB.Epson-Europe.com/PF/12/WebFiles/article%20Images/operating%20Systems/win%20XP%20-%202000/System_Properties_XP.jpg
  I suspect you have an AMD processor. If so, please read the following:
  The computer restarts after a Stop error message display 0x0000007E (after update with Service Pack 3 for Windows XP)

  Microsoft Windows XP SP3 Upgrade utility for systems with AMD processors.

• CD/DVD drive not working after reinstalling Windows

  CD driver error

  Hi, I had recently formatted my pc (laptop) and everything was fine until I tried to use my cd/dvd driver. I tried to run a disk .iso that I burned and used in the past, but with no succsess. I thought that maybe it was damaged or something like that, but when I tried to play the Cd or other Dvd it them played normally... It also seems that I can't burn to cd/dvd do anything now... then it's a hardware or software problem? How can I solve it?
  PS.i check the cd in my other computer and Word very well...
  System: computer laptop vista 32 bit driver cd/dvd TS-L633A ACOO

  Hello

  you start from an ISO file

  Make sure you have the latest vista drivers for your computer which you can get your computer manufacturers Web site

  go to their website and look for a driver and software download section

  Enter your model number for the last look drivers vista then download and install

  If only it does not correct

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• My norton 360 will not work after reinstalling. error 104 8504

  My norton 360 will not work after reinstalling. error 104 8504 norton crossed the settings there and said it was a problem of microsoft framework. any suggestions?

  Cannot be said with certainty, I do not use Norton, but a google found many reports like this, see - http://www.google.co.uk/search?hl=en&q=%22norton%20360%22%20%22error%208504%20104%22 for example.

  Usually like - http://community.norton.com/t5/Norton-Internet-Security-Norton/Error-8504-104/td-p/790378 or http://community.norton.com/t5/Norton-360/Norton-360-v6-Error-8504-104/td-p/672815

  If not, sorry, but after back with a little more information like the version of Norton 360, what OS W7 (starter home, home premium etc., 32 or 64-bit) and other clues that people Norton gave you as that "framework"? (For example .NET). The more information the better. So I hope someone can help.

  Good luck.

• VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7.

  I work in the field environment.
  Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).
  but it runs on the Windows XP computer.
  For example:-Inventory.exe (work), Sales.exe (does not work)
  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• Sound not working after bios update

  Hello

  My sound stopped working after HP automatically updated my Bios today. I already tried to uninstall and reinstall the audio drivers and ensure that everything has been started and automatic under services for

  Audio service

  Multimedia class Scheduler

  Windows Audio

  Windows Audio endpoint Builder

  I also rebooted each one for good measure, but still no sound with or without headphones. And I made sure that it is not on mute! : )

  Thank you

  Hello

  Try the following.

  Shut down the laptop, unplug the AC adapter and then remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Kind regards

  DP - K

• Stream HP X 360: touchscreen does not work after updating windows on HP Stream 10 x 360

  Hello

  I have a problem with my HP Jet x 360 after doing the update of windows 10. Seems that there are no drivers for touch screen in windows 10 again, even a generic driver.

  I checked the Device Manager and found 6 Uknown devices with no driver.

  I installed the HP support Assistant, but found no driver. Windows Update No.

  Under Human Interface devices group I can't see the touch screen and in the settings app is also absent.

  I also checked the diagnostic tool in the BIOS, but the touch screen works very well.

  Please help me!

  Thanks four your help.

  You can correct the touchsreen windows version 8.1 of 'Serial IO driver without connected sleep Support Intel'. As someone discovered in this treat: http://h30434.www3.hp.com/t5/Notebook-Hardware/touch-screen-on-stream-11-x360-not-working-after-windows-10/td-p/5188892

  You can find the driver here under pilot-Graphis-Intel: http://support.hp.com/us-en/drivers/selfservice/HP-Stream-x360-Convertible-PC/7439377/model/7579371#Z7_3054ICK0KGTE30AQO5O3KA30R1

  However this does rest not correct the prolbem completely! The Touschreen works but not the accelorometer. I hope HP suport can provide some real suport at some point and release drivers that make accelometer works in windows 10.