Finished win 7 corrupt c drive after updates.

Similar Questions

• Satellite 4100xcdt does not recognize HARD drive after update BIOS version 8.20

  My laptop is a satellite 4100XCDT with windows xp and I want to install linux.
  Have the cd bootable linux (tested on other computers) but laptop doesn't not boot cd shape so I updated the bios with version 8.20 from the toshiba support site.
  Tried the disks formatted 1.44 and 7.20 such as recommended in the manual of the 4xxx series. BIOS has been updated successfully

  Result: after pressing the switch of the usual screen Toshiba appears, after the disc hard led flashes for a few seconds then windows except modus menu appears. After I made my choice (all tried) a few seconds later (and hard drive led light) flashes a blue screen (not enough long to read the message) and the computer is restarted. When starting from a back bootable floppy, I can't reach the (cd rom) drives (hdd) C and D
  But in my opinion that Windows Save menu modus is called from the hard drive (so I think that the hard drive still works)

  Hello

  Well, in my opinion a part on the HARD drive or bootable partition might be corrupted.
  You are right, if the windows save mode appears therefore HARD drive has been recognized by the BIOS and the HARD drive is bootable.

  I think there must be something wrong with the data on the HARD drive.
  Something similar happened on my laptop several weeks ago. After you use the chkdsk/r, I was able to run the operating system again. But then I installed everything again.

  On the Toshiba page I found the companion disc.
  The accompanying disk is capable of detecting your CD-ROM drive on the
  Toshiba during the boot process. If you need access to your CD-ROM
  Hunt, then delete "rem" Word the following lines in the Autoexec. BAT
  and CONFIG. SYS on the accompanying disk.

  REM if exist toscd001 a:\mscdex D:TOSCD001 /M:10 (AUTOEXEC. BAT)

  REM device = a:\toscdrom.sys (CONFIG. (SYS)

  It may be useful

• Difficulty finding a WD external hard drive after update to 10.11.4

  Hello
  last week I updated my OS to El Capitan 10.11.4.
  After that, I have problems, make a backup on my external drive (Wester Digital MY Passport Ultra).
  After reset total of my iMac, the backup runs once, but the hourly automated backup stops.
  A manual start is not successful.

  The external hard drive is visible in the finder, but clicking the map Backups.backupdb, nothing happens. After a reboot all backups are still visible.
  It seems that the external hard drive is dismantled after the initial backup.

  Time Machine is running, HD connected properly.
  Latest version of the WD software is installed.

  Does anyone know the solution for this problem.

  Hi wots36,

  Thank you for using communities Support from Apple! I'm sorry to hear you're having these problems with your iMac and your external hard drive. If you continue to have problems with your Time Machine backups, you can find information and troubleshooting procedures described in the following articles useful:

  If you cannot back up or restore your Mac with Time Machine - Apple Support

  OS X El Capitan: If Time Machine can't find your backup disk

  Concerning

• EMCC OUI(Win 2012) does not restart after updates.

  Hello

  I am trying to install the EMCC 12.1.0.4 on a virtual machine in Windows Server 2012 hosted on an ESXi server. Previously installed without getting updates completed without any problems. Because some features did not work properly, I decided to install once more and also get updates from Oracle. I followed the directions of advanced installation. The virtual machine has been reset to the stage before. So no installation is dirty.

  After getting updates and display the patches Oracle Setup calls a Windows saying that the installer will be restarted. But it's not. I waited and waited, but nothing happened.

  Newspapers shows the first steps after the restart and no other error. I tried several other approaches:

  1. download the updates from the server to install and use my credentials for Metalink

  2. use the option - ignoresysprereqs

  3 use the option - showProxy

  4. download updates on another server using the option - downloadUpdates as the copy on the server to win 2012.

  In all cases the same behavior:

  After you click OK in the windows message saying that will follow a restart of the installation, the installation program restarts, a command window is displayed for 1-2 seconds, then everything stops.

  I have everything running as administrator.

  See below the last lines of my log file of the inventory from the last test.

  INFO: 18.05.15 13:12:05 CENTRAL: already downloaded updates is selected.

  INFO: 18.05.15 13:12:05 CENTRAL: validate the variable: STAGE_LOCATION

  18.05.15 13:12:05 CENTRAL: STAGE_LOCATION = C:\temp\OraInstall2015-05-12_09-51-47PM\updates

  INFO: 18.05.15 13:12:05 CENTRAL: all the fields are valid

  INFO: 18.05.15 13:12:05 CENTRAL: POPUP of WARNING: Das Installationsprogramm wird neu gestartet.

  INFO: 18.05.15 13:12:17 CENTRAL: the ID of the Bug 14045804 YES

  INFO: 18.05.15 13:12:17 CENTRAL: the ID of the Bug OPatch-1

  INFO: 18.05.15 13:12:17 CENTRAL: XML download location: null

  INFO: 18.05.15 13:12:17 CENTRAL: the file path is C:\Users\Administrator\defaultProperties.PROPERTIES

  INFO: 18.05.15 13:12:17 CENTRAL: Scratch Path = C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46 h

  INFO: 18.05.15 13:12:17 CENTRAL:-scratchPath

  INFO: 18.05.15 13:12:17 CENTRAL: C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM

  INFO: 18.05.15 13:12:17 CENTRAL:-sourceLoc

  INFO: 18.05.15 13:12:17 CENTRAL: C:\temp\emcc_install\install\... /stage/Products.Xml

  INFO: 18.05.15 13:12:17 CENTRAL: sourceType.

  INFO: 18.05.15 13:12:17 CENTRAL: network

  INFO: 18.05.15 13:12:17 CENTRAL:-timestamp

  INFO: 18.05.15 13:12:17 CENTRAL: 2015-05-18_01-07-46 H

  INFO: 18.05.15 13:12:17 CENTRAL:-ignoresysprereqs

  INFO: 18.05.15 13:12:17 CENTRAL: RESTART command: line cmd /c C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/install\setup rscratchPath - C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM - rtimestamp 2015-05-18_01-07-46 h - rstartupLoc c:\temp\emcc_install\install-redemarrer - ouifromLocation C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/stage\products.xml - ouiResponseFile C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1/stage\Response\oracle.swd.Complete.rsp - ignoresysprereqs - paramFile C:\Users\ADMINI~1\AppData\Local\Temp\2\ OraInstall2015-05-18_-07/01/46 PM/temp.ini - jreLoc C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM\jdk/jre - J - Doracle.installer.extjre = false

  Test auto-updates to date: using paramFile: C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM\temp.ini

  Check the swap space: must be greater than 150 MB.   Real 5625 MB passed

  Monitor: must be configured to display at least 256 colors.    4294967296 real past

  The command line to decompress:

  C:\temp\OraInstall2015-05-12_09-51-47PM\updates\LatestUpdates\Shiphome\14045804\cd\Disk1\install\unzip - qqqo... \stage\Components\oracle. SWD.oui\12.1.0.1.0\1\DataFiles/"*.jar" d "C:\Users\ADMINI~1\AppData\Local\Temp\2\OraInstall2015-05-18_01-07-46PM" INFO: 18.05.15 13:12:22 CENTRAL: validate the variable: STAGE_LOCATION

  18.05.15 13:12:22 CENTRAL: STAGE_LOCATION = C:\temp\OraInstall2015-05-12_09-51-47PM\updates

  So, if someone met sam ahint problem would be appreciated.

  Best regards

  Cantemir

  Hello

  a realization to the description in my question:

  The list of patches to install was the following:

  Patch 19337487 for the Service of management of Oracle for 12G

  Patch 19003055 for the Service of management of Oracle for 12G

  Patch 19519190 for the Service of management of Oracle for 12G

  BASIC 20392036 ENTERPRISE platform MANAGER - SGD 12.1.0.4.3 PSU (GENERIC)(System Patch)

  Updated 14045804 YES

  And I was able to capture the contents of the command window that appears for 1-3 seconds prior to YES.

  Are more errors saying:

  ...

  error: cannot remove the old c:\Users\Admini~1\AppData\Local\Temp\2\OraInstall2015-05-18_02_04_18PM\oui\jlib\xml.jar

  ...

  YES updates patch would probably come in conflict with the running configuration.

  In any case have not yet no solution.

  Cantemir

• Photos of deleted the external hard drive after updating Lightroom

  I just installed the new update.  Wish I had read some of the forums before hand.     Of the photos on external hard drive and I wanted to add them to the catalog.  After that I added to an existing catalog, I don't see pictures on the external hard drive.     If I click on the folder on the external drive, there is nothing in the folder.     If I unplug the external drive, I see the question mark by the photos.

  In addition, if I take the external hard drive and plug it into my laptop (Macbook Pro), Lightroom detects photos and does not watch the point mark.  However, I can not see the pictures on the external hard drive.

  Where can I watch, or how to find them.   This seems very odd.

  Thanks for any help.

  Thanks for the reply Akash.

  I did as you asked.

  When to disconnect the drive and click on ""?, "it shows the external drive as the previous location."

  Where to plug the hard drive and search using the finder, that nothing is found.

  When I connect the drive, Lightroom see files and works normally.

  Lightroom sees the files if the external hard drive is connected which leads me to believe that they are still on the drive.    However, they are able to access by Lightroom.  I see nothing in the files on the external hard drive.

  This really baffled me.

  Kind regards

  Birdie

• Firefox on Win XP does not connect after update! Possible causes?

  Two weeks ago Firefox auto-installé the latest version. The browser immediately lost the connection with the internet. I can't open new sites t and already open tabs cannot be updated.
  I have since trip, where the late issue.

  For better or for worse the Windows Firewall is not enabled.

  I am running Windows XP Pro on an AMD dual-core computer.

  The strange thing is a previous instance used Opera as your primary browser seems to work perfectly, I use it now to write this.

  An attempt to install of Google Chrome has failed due to internet connection issues?

  Latest Firefox on a Linux partition works perfectly afaics.

  A new upgrade of a downloaded installation file did not resolve the issue, nor has an uninstall and a clean reinstall.

  I have in any way tinkered with the options of the browser, or the internet connection before the problem.

  Grateful for the advice.

  Best

  Phil

  As far as I KNOW, the only way to really disable the Windows Firewall is by installing another firewall program.

  12 ways to be fooled by the firewall:
  
  http://forums.mozillazine.org/viewtopic.php?p=2295421#p2295421

  http://KB.mozillazine.org/firewalls

• Tecra S1: After update Win XP SP3, install Bluetooth driver crashes!

  Hello

  after update the Win XP Professional from SP2 to SP3
  Bluetooth doesn't work anymore.

  I tried to reinstall Bluetooth drivers.
  It crashes during installation,
  If you need to cancel the installation.

  There is nothing to get the correct installation finished.

  Someone has solved the problem?

  Thank you.
  Patrick

  I'm also using XP SP3 and it works. So, try the following:
  S ' ensure that the wireless switch is turned on.
  -Ensure to that Bluetooth stack is correctly uninstalled (answer all questions during the uninstallation with yes).
  -Download the latest Bluetooth stack.
  -Install it.

• Impossible to create recovery USB Drive After Win 8.1 pass on Lenovo Twist

  After the upgrade to Win 8.1 and try to create the recovery usb disk, I get this error:

  "We cannot create a disc of reccovery on this PC. Some required files are missing. To trouble shoot startup of your PC problems, use your installation window or media disc»

  Can some give me a clue as to how to solve this problem? THX.

  I contacted Lenovo who sent me a series of 4 recovery disks. These drives solved the problem, but it meant wiping the hard drive and reinstall the same thing from scratch. A new recovery partition is created and the disc reinstalled Win 8, which was to be updated. So to win 8.1 can be installed. Now, everything works as it should.

• On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  On Win 7 after update itunes Error Message error 7 (Windows error 127) whenever I have start download iTunes

  HI MikeGeorgen,

  I understand that you have updated iTunes on your Windows 7 computer, but now you see an error when you try to open it. I know it's important to have iTunes working properly, so you can sync your device, so I'm happy to help you.

  Make sure that you logged in as an administrator on your computer, and that you have the latest Windows updates. Then check out the additional troubleshooting steps that are listed here:

  Remove and reinstall iTunes and the components of the software for Windows 7 and later versions

  Thank you for using communities Support from Apple. See you soon!

• Beats Audio Control Panel has been removed from my PC after update audio driver.

  Pavilion dv7-6052er (Windows 7 x 64). Beats Audio Control Panel has been removed from my PC after update audio driver.
  Tried to reinstall manually with 6.10.6345.0 version (http://ftp.hp.com/pub/softpaq/sp55001-55500/sp55094.exe) and another randomly chosen by some. Nothing has worked.
  My actions:
  1. remove the driver and its software.
  2 restart the computer.
  3 Windows Installer some driver after reboot (I can't disable or cancel installation)
  4 reinstall the driver.
  5 restart my computer.
  Just after the start of Windows driver trying to implement something else (or to continue installation), but it causes an error: _Error: Error = error Undefined...
  Tried to do without step 2 - to reinstall the driver right after having been deleted - without success.
  Tried to remove the driver and then restore an old via Recovery Manager - Beats audio control panel is displayed but there is no sound at all!
  I think I tried all possible combinations of actions. Beats Audio Control Panel works without noise and noise without BACP. But never together.
  Please help me with some advice. Thank you.

  Hey guys! Tried once more to remove the driver and install it with the Recovery Manager. Don't know how, but this time it worked.

  In fact I've disappointed with HP updates, won't be tester for you. I'm tired of these bugs after updates (utility Cool sense, Beats Audio etc.).

  Turn off automatic updates on my PC, seems I don't need your "improvements".

• Must the updates and hot fixs remain on the hard drive after having been loaded? Is the information provided in the operating system?

  Must the updates and hot fixs remain on the hard drive after having been loaded?  Is the information provided in the operating system? Or do the lonely stand.

  Original title: need for disk space

  Here are the official specifications of Toshiba for your PC...

  http://support.Toshiba.com/support/staticContentDetail?ContentId=638405&isFromTOCLink=false

  All interface PATA (IDE) connectors are a standard 40 pin.

  I know that there is no restriction on the mixture of ATA drives with different speed capabilities and no restrictions on what cable you use, whether 40 wire or 80 strand (but still 40 pins).

  Faster drives will only work at the speed of the slowest car on any cable and 80 strand cables are needed to make ATA66 or higher drives run at their native speed.

  In addition, no player can work faster than the motherboard chipset permits, in your case ATA66.

  My provider of trade has still some disks 3.5 '' PATA in stock, but these are becoming harder and harder to find. Indeed, it is possible that production has ceased and that suppliers are just exhausted stocks.

  I can certainly say that, when repairs this technology were more frequent, I never had problems with discs theoretically faster on the same cable as slower drives, nor by using faster on 40 cable strands discs. In fact, of many penny pinching manufacturers (some of them major) regularly used for the optical drive and hard drive on the same cable as the motherboard has two connectors, resulting in a decrease in performance on the disk hard (although most of the people would not have noticed the difference). Sometimes, the cable would be 40 strand (understandable if you are penny pinching) and sometimes the cable would be 80 strand (laughable if you are penny pinching because they are [were] more expensive).

  Pass your question about vacant below the sound card. Unless your text confused me, this space is for expansion cards no disk drives. Space that you reference is probably to the back of the PC. Hard drives are normally located toward the front of the dedicated PC "berries". Unfortunately, I could find no photo on the Toshiba site, and still less those internal.

  Tricky

• After the new installation of hard drive and a reinstall of Windows XP on I: function used Drive, Windows Update

  After the new installation of hard drive and a reinstallation of Windows XP I: Drive, Windows Update continually responds with: "Files required to use Windows Update are longer registered or installed on your computer" by clicking on the option to register or reinstall results by bike to the same error.

  Hi TedWie,

  Windows update no longer works for systems with SP2 or less. To check your systems service pack level, click on Start, run and typeWinver in the Run dialog box. If your system does not already have Windows XP SP3 installed, download and install XP SP3 from the link below. (Ignore warnings about professionals of computing and network facilities).

  Windows XP SP3.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=24

  Windows XP SP2. (According to THE level of SP)

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=28

  Note:
  If your system has a Processor AMD, download and install before installation of the SP3 of XP, theUpgrade utility Microsoft for processors not intel

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?CC=UK&LC=en&softwareitem=PV-60484-2

  If you encounter problems installing XP SP3, you can refer to the procedure described in the link below to resolve an installation failure.

  How to troubleshoot a SP3 Installation fails.

  http://support.Microsoft.com/kb/950718

  Let us know if this solves the problem.

• Should we format the C drive after you install this update

  I use service pack 2 automatic update to download service pack 3. Does it format the C drive after installing this update?

  No..........

• User profile corrupted after update requiring a reboot

  Corrupted after update user profile

  Thank you
  I found that the only way to open a session is shutting off the power and I rstarting in safe mode that will accept my password of user profile and then select a restore point prior to download, and then he accepts my user profile and password.
  Is there a problem with the windows updates that are the cause as this has now happened twice.

  I have not tried to change update settings as I put it to advise me updates and let me choose.

  Other thoughts?

• Win 7 Pro 64 install, after good connection install & internet Microsoft Update hangs forever

  A failed hdd on HP 6515 b required new hdd & install Win 7 Pro 64. After the proper installation & connection internet Microsoft Update hangs forever. Otherwise the computer works fine. We need .net updated for special application.

  Unfortunately, this happens to a lot of people lately.

  Windows Update problem (new)

  The following procedure applies in the case of installation (reinstall) Windows 7.  It does not apply to a usual, normal day.

  I'm afraid that you will do the reinstall again.  Not a terrible penalty to pay.  Usually takes less than an hour.  Then immediately proceed to the next procedure.   It's strange, but it really does work and many people have proved it.

  NEVER install anything other than Windows updates until your system is up-to-date.  Once you have the list update, install all together.  Installation of updates in batches is not expedite the process or do better.

  1. Before you begin to re - install, download (32 or 64 bit) KB3083710 and KB3102810 in advance and store on a USB
  2. Start and end the re - install Windows 7 SP1
  3. Before that the newly installed system can go online for the first time, Disconnect the computer from the Internet.  This chronology is essential.
  4. Install KB3083710 and reboot manually.
  5. Install KB3102810 and reboot manually.
  6. Restore the Internet connection, and run Windows Update as usual.
  7. After a few minutes, you should have a lot of updates to download and install.

  Thanks to Ken Morely

  Note: When you search for the 64-bit version of these KB specify 64-bit.  The 32-bit versions do not say what version they are.