Firefox already running, cannot find the profile
I got the msg posted in my question, created new profile (3.6.19), old does not appear in my profile folder. Its still listed in the text of the notebook "profiles.ini" however. I made suggestions help here & on the mozillazine site, but no luck. Is anyway to recover the old profile now? If he doesn't then I have w0n can't must start all over again with the introduction of a new to be like the old. Thank you for your help.
-> Close Firefox (ALT + F-> exit). Delete all profiles user of Firefox that is mentioned below:
-> Start the Profile Manager
Firefox - choose the profile of the user window will appear. Select a profile and then delete. It will ask for confirmation to delete the profile, click on 'Delete files'. Also REMOVE ALL THE PROFILES one mentioned in the window and output profiles manager.
-> Click on the Start button, select run... Type
AppData%\Mozilla\Firefox\Profiles\
and click OK. A window will open containing profile folders. Delete all the folders inside the profiles folder (even if none of them is still there because you have removed every Firefox user profile). Your computer.
-> Start Manager profile again and CREATE a NEW USER PROFILE.
Check and tell if its working.
Tags: Firefox
Similar Questions
-
Using OSX 10.5.8 on macbook 2.1 GHz Core 2 duo, 1 GB 667 MHz DDR2 SDRAM
Firefox previously worked flawlessly 16.0.2,Thanks, I found the file in a different location, but it works
-
After turning on my computer, I try to connect with our user account. an icon appears and says that the user profile is damaged and there could be a security issue. the following icon says that it cannot find the profile of the user and that a temporary profile has been put up. I'm trying to get back access to the user profile because he has sensitive information at the time that must be consulted, photos of family and passwords important programs. I need to know that if there is a way to restore the user profile and retrieve information, the user profile of temporay gives access to certain programs and software, but not the critics.
The following procedure, you should get pretty quickly:
"How to recover damaged Windows XP user profile"
<>http://support.Microsoft.com/kb/555473 >Damaged profiles are almost always accompanied with alteration of the disc. In addition to the above (or sometimes instead of him), a check disk with the /f or/r option is highly recommended. Note that on a large drive or a drive with a lot of problems this audit can take hours and you cannot use your machine while it is in progress. In addition, there is a small chance that it may be worse, so now is a great time to update your backups.
"How to perform disk error in Windows XP check"
<>http://support.Microsoft.com/kb/315265 >HTH,
JW -
I'm unable to start Firefox. To get the message that it is already running. Cannot find my profile using '% APPDATA%\Mozilla\Firefox\Profiles| '. Restarting my computer did not help. Because I had this problem I also noticed that all my favorites that I had copied in Windows Internet Explorer also disappeared. I use Firefox as my main search engine and usually do not use Internet Explorer. I am running Windows 7 on my machine.
Try this add on the profile folder
-
Hi, I'm new developer on the Blackberry platform.
I make the first application, but there is a problem when I wanted to install in the Simulator.
My application has several screen and each take the server data, analyzing the data and displays on the screen.
My problem is any executable thread.
When I'm using the code below, it is fine. My application can work perfectly on a simulator.
public TestingScreen() { // Runnable thread = new Runnable(){ // public void run() { // TODO Auto-generated method stub // my code get data from server Dialog.alert("Hii"); // } //}; //new Thread(run).start(); }
but, if you use floor area or UiApplication.getUiApplication (.invokeLater), I got error "i/o Error: cannot run program"jar": CreateProcess = 2 error, the system cannot find the file specified"
public TestingScreen() { Runnable thread = new Runnable(){ public void run() { // TODO Auto-generated method stub // my code get data from server Dialog.alert("Hii"); } }; new Thread(run).start(); }
I have the 11 screen and all have executable statement and works perfectly. Can run in the Simulator, can get data from the server. But when I create the new #12 screen (copy paste other on-screen), page couldn't use an executable statement. Each I use Runnable/thread, I got error. But when I remove an executable statement my work normally requires.
I already have Google but I do not get the answer.
Please advice. Thank you very much.
Kind regards.
hrnt, thanks for your answer on this issue. It helped me solve my problem as well.
Just to add, for someone else, I use the 32-bit and changed Java SDK my way to the bin folder where the SDK was installed.
-
Cannot find the function edit that was on my old computer and firefox. When you click the Firefox icon you can extract the text that was deleted by accident.
Hello, you can press the alt key to display the menu bar with the Edit menu temporarily. or you can press ctrl + z which is the shortcut for "undo"...
-
Often, I get the message error "Firefox cannot find the server.
Often, I get the message error "Firefox cannot find the server. Page normally, refresh the page to load, even if sometimes it takes more than one try.
I checked my connection settings. IPv6 and DNS prefetching are disabled, according to the recommendations in this article: https://support.mozilla.com/en-US/kb/Firefox%20cannot%20load%20websites%20but%20other%20programs%20can?s=Firefox+can%27t+find+the+server+at & r = 1 & as = s
See also:
- http://KB.mozillazine.org/Error_loading_websites
- https://support.Mozilla.com/kb/error+loading+Web+sites
You can try to reset (power off / on) of the router.
-
original title: access to Movie Maker
I am running xp sp3 and cannot find the movie maker software in the all programs list, how can I access this software application?
You are welcome and thank you for the comments.
-
Vista cannot load RealPlayer/FireFox message "the system cannot find the environmental option". Any ideas?
Hi Magnusopus,
· You receive this message when you use Real player or Firefox?
· You did changes to the computer before this problem started?
You can try to uninstall Real player and firefox to the computer and reinstall and check if that helps you solve the problem. Access the link below and follow the steps to uninstall the program from your computer.
http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program
Subsequently access the links below to download Firefox and Real player and even install and check if it works very well.
Link to download Firefox:http://www.mozilla.com/en-US/firefox/ie.html
Link to download Real Player:http://www.real.com/realplayer
I hope this helps. Let us know the results.
Thank you and best regards,
Srinivas R
Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I use Windows 7 on a computer to which a printer is connected directly by a USB cable. I am able to print, but cannot find the printer when I run control/devices and printers Control Panel. In fact, no devices appear at all.
Can someone help me with this?
Thank you.
See http://www.winhelponline.com/blog/fix-devices-and-printers-completely-empty-windows-7/
If this does not help, there is a very long thread here, which may include other suggestions--> http://answers.microsoft.com/en-us/windows/forum/windows_7-hardware/devices-and-printers-dialog-box-empty/353707a4-bcb0-4334-98bc-aab84747fecd?page=1
-
Hello
My apps works very well for the current code, but if I add a new function or class in my eclipse application code indicates the error of
Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified
I searched the forum and google for this problem, certain solutions are related to java path but myjava path is ok as the current code works very well
So what problem here? and whats solution for that?
has got the solution to the problem of its need for .jar files path previously I did not understand why he neede path of pot now his reason is here
-
I/o Error: Cannot run program "jar": CreateProcess = 2 error, the system cannot find the file specified
Why is the error, how to fix?
File jar.exe. For example, I have a copy of it in C:\Program Files (x86)\Java\jdk1.6.0_24\bin
-
When the update of Windows XP is install SP3, the sequence is abandoned at the location of the process. After you download the SP3, the progresses set install through the normal initialization sequence, inspection, creating list of 3rd drive part, backup files, etc., begins to install the files but when to reach the "UNIDRV. The installation of the file "DLL" stops and I get a message "the system cannot find the file specified". The close message will invalidate all the installation and possible automatic restart. I did not locate a UNIDRV. DLL file and copy it to my C:\ root directory but have tried almost everything in the 22/01/12 'terribrownQF' and the response "Tommy Stanley" 22/01/12 no change where the installation of SP3 crashes. Should I try to put the UNIDRV. DLL file on my computer? Any other ideas?
Please respond to each of the following diagnostic questions in a numbered list type in your very next answer (no need to quote this post):
1. What is the full name of your application or the installed antivirus security suite and when (date about) is your subscription current expires? What (other than Defender) anti-spyware applications are installed? What third-party firewall (if applicable)?
2 a Norton or McAfee application ALREADY installed on the computer?
3. do you have a free trial Norton or a test of free McAfee [CHOOSE ONE ANSWER] come preinstalled on the computer when you bought it? (No matter if you have never used or activated).
4. why has not been installed SP3 years? [1]
5. is Firefox, Chrome or any other alternative browser installed?
6. are you familiar with "Registry cleaners" (e.g., Registry Mechanic;) System Mechanic; RegCure; RegClean Pro. Advanced SystemCare. Registry Booster; McAfee QuickClean. AVG PC TuneUp. Norton Registry Cleaner; PCTools optimizer; SpeedUpMyPC; PC Doctor; TuneUp Utilities; WinMaximizer; WinSweeper; Comodo System Cleaner. Advanced System Optimizer. CCleaner)?
7 have you ever had the opportunity to do a repair install or clean install of Windows XP for some reason any?
=====================================================================
[1] note: support for WinXP SP2 ended the July 13, 2010! "Computers running WinXP SP2" will no longer receive software updates from Windows Update "[i.e., updated on and after August 2, 2010 so now that you're missing more than two years worth of updates to security critical! ] until SP3 has been installed. -
Build error cannot find the distribution under construction
I had a similar problem like this thread.
http://forums.NI.com/T5/LabVIEW/build-error-can-t-find-distribution-being-built/TD-p/1462842/page/2
My old guard Installer and ask for copy of the installation is finish. Quite annoying because it takes so long to get there. Any advice would be appreciated. I've attached a screenshot of my error message.
You created this problem by running a build already install on your development computer. If you are distributing drivers with your installer you should NEVER run the installation program on the machine on which you build.
Here's what happens:
All software shops NOR where it was installed since in the Windows registry. When you initially installed it note where you install (DVD, network drive, etc.).
When you build an installer in TestStand will prompt for this location if it cannot find the original installation files (that is, if you take the DVD from the drive disconnected from the PC from the network, etc.)
What happened on this PC is you have to build a Setup program, and then you run this installer on the PC, and because the pilots were already present it replaced the path stored in the registry with the path where your Installer (e.g.) was C:\Temp\long path)
I'm guessing that you have now deleted this former Installer. That means that you have to re - run installers for ALL the software to, OR that you have installed on this machine so the registry is updated to point to the path of DVD or the network path.
-
Everytime I try to log in my original admin. Account, it is said that it does not find the profile, then product to load a temporary profile instead, one without personal settings or memory. What is that?... and how can I solve this problem?
Hello
These methods should help for Windows 7 or Vista.
References to Vista also apply to Windows 7.
You can try to fix it with Safe Mode - repeatedly press F8 as you bootup. THE ADMIN
Safe Mode account has no default password (so unless someone changed
the password should be available).Some programs such as the Google Updater (if you've added the Google toolbar,
Chrome or Google Earth) has been known to cause this problem.Error message when you log on to a Windows Vista-based or Windows 7
computer by using a temporary profile: "the user profile Service has no logon.Unable to load the user profile.
http://support.Microsoft.com/kb/947215Difficulty "the user profile Service has no logon. User profile cannot be loaded. "Error in Windows 7
http://www.SevenForums.com/tutorials/186131-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "the user profile Service has no logon. Could not load user profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/130095-user-profile-service-failed-logon-user-profile-cannot-loaded.htmlHow to fix error "your user profile was not loaded correctly! You have visited
logged on with a temporary profile. "in Vista & Windows 7.
http://www.Vistax64.com/tutorials/135858-user-profile-error-logged-temporary-profile.htmlBE VERY CAREFUL IF YOU USE THIS ONE:
DO NOT USE THE ACCOUNT HIDDEN ON A DAILY BASIS! If it corrupts you are TOAST.
----------------------------------------------------------------------------------------------------------
For Windows 7:
http://www.SevenForums.com/tutorials/507-built-administrator-account-enable-disable.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.How Boot for Windows 7 System Recovery Options or use a Windows 7 boot disk.
http://www.SevenForums.com/tutorials/668-system-recovery-options.htmlWhat are the system recovery options in Windows 7?
http://Windows.Microsoft.com/en-us/Windows7/what-are-the-system-recovery-options-in-Windows-7How to create a Windows 7 system repair disc
http://www.SevenForums.com/tutorials/2083-system-repair-disc-create.html----------------------------------------------------------------------------------------------------------
For Vista:
How to enable or disable the real built-in Administrator account in Vista
http://www.Vistax64.com/tutorials/67567-administrator-account.htmlUse the hidden administrator account to lower your user account APPLY / OK then
Raise it to ADMIN. This allows clear of corruption. Do the same for other accounts
If necessary after following the above message.You can use the hidden - administrator account to make another account as an ADMINISTRATOR with
your password even (or two with the same password) use a test or difficulty to another.You can run the command Admin account hidden from the command prompt
from there if necessary.This tells you how to access the System Recovery Options and/or a Vista DVD
http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspxWhat are the system recovery options in Windows Vista?
http://Windows.Microsoft.com/en-us/Windows-Vista/what-are-the-system-recovery-options-in-Windows-VistaHow to create a Vista - free methods recovery disk
http://www.Vistax64.com/tutorials/141820-create-recovery-disc.html---------------------------------------------------------------------------------------------------------
If you can't access your old account you can still use an Admin to migrate to one
new (remember to always leave an account Admin who is not used except)
to test and difficulty).Difficulty of a corrupted user profile
http://windowshelp.Microsoft.com/Windows/en-AU/help/769495bf-035C-4764-A538-c9b05c22001e1033.mspxI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="">-><- mark="" twain="" said="" it="">->
Maybe you are looking for
-
File firefox_RASAPI32.log daily increase
Firefox_RASAPI32.log increase in daily file (C:\Windows\tracing\firefox_RASAPI32. (LOG). It is now 697 MB. How can I stop this?
-
How can I restore the default new tab of Mozilla Page
Firefox used to have a screen of my opening of sites visited when I open a new tab. Now, after installing and uninstalling of software Incredibar (malware is better that way), I can't seem to get the page MyStart opening when I create a new tab. Is i
-
Qosmio G20-108 Windows recovery problem.
Hello I just purchased a Qosmio G20-108 of ebay and the seller said that the laptop is ok but I had a virus previously and it wiped the HARD drive. The DVD player has so replaced it by a new one, but he couldn't just load the recovery of Windows Medi
-
Compaq v3000: need to press the power on button repeatedly
Hello My compaq must support the switch several times, and lengthwise, press. Sometimes, but sometimes not. im not using batery because it totally dead, so im used directly to adapter charger.please help to understand
-
HP laserjet pro 200 color mfp m276nw
I try to install the drivers for the above printer and the installation fails. So, here are my findings: -the printer driver has been downloaded from the HP website. -the installation process stops at exactly 80% of the first ' stage '. -during the r