Firefox hangs when I try to log-in to ebay. After the shot, I have to restart because neither Firefox or IE6 will begin.
Whenever I try to log on to Ebay, I get my name of user and password and Firefox crashes. Simply has nothing. I have to restart my laptop to be able to browse after you it. He is certainly linked Firefox because it is fine with IE6.
I have disabled all add-ons, removed them all, UN-installed Firefox, re-installed and still the problem persists. Tried the mode without failure, but still the same thing.
Windows 7, Firefox 17.0.1.
Problem is caused by software Trusteer report.
You can turn it off and wait for them to get out an automatic update, or uninstall it completely and then download the latest version of its Web site (latest is 1207.40).
Tags: Firefox
Similar Questions
-
I have updated and now when I try to log on to Web sites with fingerprint reader, I get "Firefox doesn't know how to open this address, because the Protocol (dpql) is not associated with any program."
What is the Digital Persona fingerprint scanner? If it's that they have abandoned, for more details, see https://support.mozilla.com/en-US/questions/799388
-
I've logged on this particular site, http://www.springairsystems.com/SpecAndQuote/User/Login/View.aspx a number of time's recent past. When I try to log in now, I get a prompt in red letter indicating, "proxies cannot be captured by a stateless session." What should I do to open a session? I set my privacy settings to allow cookies from Firefox, but is not alleviate the problem.
See this - http://en.wikipedia.org/wiki/Proxy_server
-
Robocopy hangs when you try to copy a file which in use
Hello
I find that Robocopy hangs when you try to copy the file using, for example an Outlook .pst file. The behavior of Vista was not to copy the file according to the retry and wait switches from command line, which allowed the backup race move to the next file and finally finish. With Windows 7 the Robocopy session is suspended and resumes ever, even if the file she is trying to copy is closed.
Is this behavior under Robocopy in Windows 7? Is it possible to get Robocopy to move to the file according to when he's trying to copy a file that is in use?
Thank you
Jason.
"There is no need of me a pause in my script"-Yes, I understand [and should have done before].
I just tested a network for the first time operation. It hangs forever as your done even after I closed Outlook & waited for the w: 30 I put. {I also ran with closed Outlook the first time just to make sure that the network itself had no problems}
I read that you have provided the link. This suggests that there is no solution.
- - - - - - -
You seem to be doing a lot more & probably more structured than mine operation, this workaround might not be of any use to you. The other open files issue concerns a simple hourly backup of my kernel files that includes pst files.
1 I xcopy all the files in a folder internal InterimBackup first. Can I use XCopy or RoboCopy to send InterimBackup to the real destination.
2 If Outlook is open then it will copy on InterimBackup and, if the previous Outlook.pst is still in InterimBackup she gets deleted by the attempt of xcopy. [conclusion - XCopy verifies the existence of the replacement of a file, deletes it and only then discovered that the source file is locked and cannot be copied.]
So I precede this with
0 I run [if exists] copy D:\InterimBackup\Outlook.pst to D:\InterimBackup\Outlook2.pst
The result is that whole process always ends but it only includes the last Outlook.pst that was available. So I always make a point of Outlook to quit at some point during the day so that he could take part in this backup.
If you have also tried this as a two part operation, your xcopy / robocopy in the folder InterimBackup would always succeed but would include only Outlook.pst if you had first closed the application. Subsequent operation of RoboCopy would always succeed with the same possible omission.
The downside of this might not suit your overall goal. You'd have to RoboCopy separately all your others folder trees but keep the Outlook.pst in a tree that has not been included. You could do this either by restructuring of your data or using RoboCopy exclude switches for the file Outlook.pst file.
You have to accept that you might not be sure about the last time that the Outlook file had been included unless you had deliberately run the RoboCopy closing.
I have reviewed this improvement by using Task Scheduler to respond in the event of closing Outlook and use it to initiate the copy outlook.pst to InterimBackup, then by running the part of the main operation on RoboCopy to this folder. But my needs are so simple that I've never felt it's the logs of the events that I would have to put in place.
As I say, it may not meet your needs.
-
my iphone hangs when I try to open the content of the email
my iphone hangs when I try to open the content of the email
What ios version do you have? It's 9.3? Because there is a bug in the most recent update, which can freeze your mail and Safari.
Apple should have an update out before the end of week
Fingers crossed
-
"socket error".
When I try to log the p2p soulseek site, I get the error message "connection failed: socket error.» change the connection settings. How can I fix it? Is - this type of error called a winsock error? It keeps happening to me on this site. What I've read, it happens when you make changes to a program before concluding that under its weight. Could it happen because I'm deleting files, I don't think that will be completed while the other files are D/Ling? That's what I'm doing wrong? I found a solution to correct an error in Winsock that is to enter the "command prompt" and type "netsh winsock. Will this work? (I'm sorry I have so many questions in this post, but I have had TO KNOW!!)Hello
I suggest you send the question here for best support about the issue.
-
Hi, I had the age of empires of the steam, and when I try to log in, I have a product key... can you guys please help me?
original title: age of EmpiersHello Hiddenxin,
I would recommend posting your question on the forums of Steam for Age of Empires: -
When I try to log on I see a pop-up that says: this copy of Windows must be activated with Microsoft you can connect. -Enable yes/no? When I click on Yes my screen go black and that's it. Nothing happens. I have windows xp professional. For PC refurbished
Hi Blue85angel,
· What is the number and the model of the computer?
· You did changes to the computer before the show?
See the following articles in the Microsoft Knowledge Base and check if that helps.
You are prompted to activate Windows XP or Windows Server 2003 every time that you start the computer
http://support.Microsoft.com/kb/312295
Blank page to activate Windows in the wizard of Windows Product Activation
http://support.Microsoft.com/kb/314935
To do: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
How to back up and restore the registry in Windows
http://support.Microsoft.com/kb/322756/
You can also contact Activation of Microsoft technical support for assistance:
Activation and registration of a Microsoft product
http://support.Microsoft.com/kb/326851
I hope this helps.
-
Computer hangs when you try to watch live TV through windows media centre__
Computer hangs when you try to watch live TV via windows media Center
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.0.6001.2.1.0.768.3
Locale ID: 3081
More information about the problem:
BCCode: a
BCP1: FFFFFA600C193FF8
BCP2: 0000000000000002
BCP3: 0000000000000001
BCP4: FFFFF8000233499E
OS version: 6_0_6001
Service Pack: 1_0
Product: 768_1
Files helping to describe the problem:
C:\Windows\Minidump\Mini112509-01.dmp
C:\Users\user\AppData\Local\Temp\WER-132569-0.SysData.XML
C:\Users\user\AppData\Local\Temp\WERCC53.tmp.version.txt
Read our privacy statement:
http://go.Microsoft.com/fwlink/?LinkId=50163&clcid=0x0409Hi Eddie Hunt
Welcome to the Microsoft Answers Forum!
I suggest you try this method and check if it is helpful
Method 1:
Start your computer in a clean boot and check what third-party software or program is at the origin of the problem. To help resolve the error and other messages, you can start Windows by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to run check and clean boot if you have the problem.
i. Click Start, type msconfig in the search box and press ENTER.
II. If you are prompted for an administrator password or a confirmation, type the password, or click on continue.
III. in the general tab, click Selective startup.
IV. under Selective startup, clear the check box load startup items.
v. click on the Services tab, select the hide all Microsoft Services check box, and then click Disable all.
VI. click OK.
VII. When you are prompted, click on restart.
VIII. after the computer starts, check if the problem is resolved.
If the problem is solved, check what third-party software or program is at the origin of the problem, referring to the link given below:
Reset the computer to start as usual
When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
i. Click Start, type msconfig.exe in the start search box and press ENTER.
II. If you are prompted for an administrator password or for confirmation, type your password, or click on continue.
III. on the general tab, click the Normal startup option and then click OK.
IV. When you are prompted to restart the computer, click on restart.
Method 2:
Install the latest codec package and check if that helps, link below will help you with the same:
Method 3:
Update the graphics card. Steps to update the graphics card:
i. click on start, type devmgmt.msc and then on enter.
II. develop the graphics card and right click on the sub element and click on update driver.
Link for reference: problems with watching TV on your computer
Thank you, and in what concerns:
Samhrutha G S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
User login problem
I have only one user, and the user name is messed up, so when I try to log on the user name does not match the password. So, I just can't. I tried the F8 key it didn't have anything to help me. All the answers? Please, I beg you. I have my Vista Ultimate cd, but I have a lot of photos and stories I wrote. I don't want to lose these.
Hello
I suggest you go through the following links.Microsoft's strategy concerning lost or forgotten passwords
http://support.Microsoft.com/kb/189126What to do if you forget your Windows password
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-you-forget-your-Windows-password -
Error message: MatsGetSapCatalogue failed when I try to log on to Fixit Center.
Original title: MatsGetSapCatalogue failed
Why do I receive the message > MatsGetSapCatalogue failed< when="" i="" try="" to="" log="" on="" to="" fixit="" center?="">
Hi Malgaff,
Since you get this message when you try to log on to Fixit Center, you can post your query on Microsoft Fix center for assistance.
-
When I try to log on; the message indicates that the profile of the user didn't log in
Original title: user profile
Hi there, anyone know how to recover a Windows Vista administrators password. Currently I am locked with when I try to log in. the message indicates that the user profile is not the newspaper.
Using standard Microsoft shows a procedure to copy and paste the profile to fix it, but this assumes that the broken account is a standard user account and not the administration. When the system asks the admisistrator password access details - of course it does not work because of the problem of user profile. Any help would be great.BHello
I suggest you to follow the steps in troubleshooting this article and check if it helps
Error message when you log a computer Windows Vista-based or Windows 7 by using a temporary profile: "the user profile Service has no logon. Unable to load the user profile. -
original title:
When I try to log in to my admin user, a screen appears and says ' the user profile service has no logon. User profile cannot be loaded. "I can't spend anything for users of our families because they ask for approval from the admin and it won't work. What can I do to correct the admin user?
You have another admin account , you can connect?
If so, please do it and then run the Microsoft Support tutorial below.If you don't have another admin account, go into safe mode.
Here's how to get safe mode:
Shut down your computer > turn it back on and immediately and repeatedly tab key F8 until you see a black and white screen. The top/down arrow and selectSafe Mode with network.In the window of logon in safe mode...
1 can connect to your account administrator in safe mode?
If so, run the Microsoft tutorial support listed below.2. If you can't log into your own account, you see another admin next to your account in the logon screen?
If you do, that one is the built-in Administrator account. By default, there is no password. Opening of session and run the tutorial from Microsoft technical support below.3. If you are able to log on in safe mode, do a system restore. Choose a date when you were able to log in NORMAL MODE as your restore point.
How to do system restore: System Restore tutorialtutorial from Microsoft support :
http://support.Microsoft.com/kb/947215
There are several methods,go through one by one.
Method 3 has a "fix it for me" application
For the benefits of others looking for answers, please mark as answer suggestion if it solves your problem. -
MMC hangs with print server when I try to print a test page for the server.
Windows Server 2008R2
Printer HP1606n
Signature of the problem:
Problem event name: BEX64
Application name: mmc.exe
Application version: 6.1.7600.16385
Application timestamp: 4a5bc808
Fault Module name: hp1100su.dll
Fault Module Version: 0.3.1.36655
Timestamp of Module error: 4dba6516
Exception offset: 00000000000159bd
Exception code: c0000409
Exception data: 0000000000000000
OS version: 6.1.7601.2.1.0.272.7
Locale ID: 1033
Information additional 01:00 c 6
More information 2: 00c62f6d4134d9a2c3306d7c5b5b94b0
3 more information: c9eb
Additional information 4: c9eba0fb841db4dab90b359385c03455The module that seems to be the cause of the accident is the hp1100su.dll:
Fault Module name: hp1100su.dll
Fault Module Version: 0.3.1.36655The hp1100su.dll is a part of the driver for the printer.
What you could try is uninstalling and reinstalling the driver of printer using the version of HP.
I believe that the following may be the printer:
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&lang=en&LC=en&product=4110410
-
Creating cloud 2015 said that I was disconnected when I try to log
Creating cloud 2015 said that I was disconnected when I try to log in. What it means?
Sign by sign in http://forums.adobe.com/thread/1450581?tstart=0 can help
- and http://helpx.adobe.com/creative-cloud/kb/unable-login-creative-cloud-248.html
- and the "loopback" https://forums.adobe.com/thread/1504792
Maybe you are looking for
-
New Yoga 14 stops when the lid closes
I just got a new series of Yoga 14. Sometimes, but not always, the laptop stops when I close the lid, even when it is plugged. I already looked at the option to 'choose what happens when the lid is closed' and it is set to sleep, no downtime. Any ide
-
Hello, I want my data to be reversed but my x axis remains the same. When I use the switch button in properties, it reverses the two. Any ideas? I'm using LabVIEW 2009. and I'm plotting with a waveform graph. Thank you!
-
Windows XP refuses to install fonts open Type (OTF)
I tried to understand why this does not work for some time without success. OTF fonts are supposed to a native XP supported, but everytime I try to install various OTF fonts, if I install through the record or copy paste and no matter how many differ
-
Error code 31 with Windows 8.1
Get an error code 31. Windows 8.1. Installed a security software update version and now can't access wireless network. Having run all troubleshooting patches but the adapter from network. Can you help me?
-
Trying to find out if my software work and what happens if I load the wrong software?
Just ordered my HP Pavilion yesterday so I have not yet used. Some the sofware as 'Adobe Photoshop Elements 7' which is on my xp desktop I want to load on my new laptop. On the side of the box does not list windows 7 but it does not list xp and vista