Firefox is not recognizing that its update for firefox 4

Similar Questions

• Windows not recognizing that the updates are already installed

  Running Vista 32-bit. keep them advised/offered (daily) as the following updates are available: 2533523 KB; 2468871; 2539636 and 2487367. However, these were all installed several times and installation was successful, as evidenced by the updated history file. Help!

  PETER HOWARD

  Hi Peter,.

  In addition, check to see if this article helps you.

  Troubleshooting Windows Update or Microsoft Update when you are repeatedly offered an update

• My flash player has been updated and still does not recognize that its been updated

  My flash player has been updated and still does not recognize that its been updated on sites like facebook. I restarted my computer several times, tried to reinstall the latest version of flash player, active manage add ons and clicked active x (all windows instructions). But while that in facebook, I can't download the images as I used to on my old laptop, its me to download 1 by 1, because it says that I don't have the latest version of flash player, BUT I DON'T!

  Flash Player in Windows 8 is embedded you do not download it and all updates are are through Windows Update. Hope this helps and if you need any additional aid station and we will be happy to help you.

  The above opinion is mine and mine nothing and does not necessarily reflect that of Microsoft, it employees, or any other Member of this forum.

  "When you try to pick out anything by itself, we find it hitched to everything else in the universe."-John Muir

• I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I can not install the "Security Update for Microsoft Silverlight (KB2636927) ' get the error code"656»»"

  I would like to reinstall the version the most recent, but before to do that click on the "fixit for me" button on the bottom of the page to

  http://support.Microsoft.com/kb/2608523

  Latest version

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

• ALT + scroll stop do not work since being updated for firefox 17.0

  Usually, I use a single line of Alt + mouse scroll to scrolling in firefox, but updated for firefox 17.0, it works no more, even in safe mode.

  Hello pikashi, the scrolling behavior has been overhauled in firefox 17 (for technical reference information see https://wiki.mozilla.org/Gecko:Mouse_Wheel_Scrolling).

  It must still be possible to define a frame rate different when you press the ALT key you can enter Subject: config in the address bar of firefox (confirmed the message information where it appears), search preferences starting with mousewheel.with_alt.delta_multiplier_ ..., you can double-click on these parameters and assign a different value to - then a restart of firefox is required for the changed settings take place in the browser.

  I don't know exactly how they work, but for example by defining all 33 instead of 100, the scrolling speed is greatly reduced. You can play around a bit to find the ideal values which correspond to your needs...

• Why do you put a restriction on facebook in my browser not recognized as its driving me crazy. His facebook and bigger than anything

  recently I noticed that when I log on facebook there is an icon near the lock of the top bar which restricts Facebook. you tell her not to work on every page on fb, connect you to. Facebook is so great and yet it says the icon is there as the https for facebook is not recognized as a place sure enough site. how ridiculous. its as big as the planet facebook. Firefox can solve this problem and remove and accommodate somehow better facebook because if this is not fixed I have to go to use google chrome and I don't want to. its driving me crazy. Thank you

  This thread is a bit confusing! I'll try to summarize.

  Block some content unsecured to secured pages is a trend; I think that Internet Explorer has done this for a while.

  Content integrated into the pages of Facebook is supposed to have already a secure URL, according to developer FB, but that is not running or this problem would not exist. I hope over time this problem will disappear.

  For now, you can use the extension of the toggle joint active content quickly turn your unsecured on and outside content protection. This is a global setting, not site specific, so it's best to leave it on as much as possible.

  After installing the extension, you should find a new icon in the bar of the add-on: an 'A' on a green or red square. Green means Firefox protects you, and red, that it is not.

  If the icon is not in the bar of the add-on (which you can also show or hide by pressing Ctrl + /), you may need to drag it out of the Customize dialog box and drop it in a perfect location. You can open it using one of these:

  • Right click on a zone empty of the tab bar > customize
  • Press the Alt key > menu view > toolbars > customize

  You can get configured as you wish?

• USB printer not recognized after Windows update

  OT: usb device not recognized

  After that suddenly stop, reboot, done, the device is plugged in where the printer indicates that it does not recognize the device. I said abattissent unplug it and reconnect it and if it doesn't work me to replace... I re install the driver for the Hpdeskjet940c but nothing works...

  Hello grasshopper.

  This problem may be caused mainly by broken printer drivers, this could have been caused when you installed the updates. I suggest that you start with a restoration of the system on the computer by choosing a restore point when it was working fine.

  a. Click Start, type system restore in the search box and then in the list click on the system restore program.

  b. If you are prompted for an administrator password or a confirmation, type your password or click on continue.

  (c) in the System Restore dialog box, click on choose a different restore point and then click Next.

  d. in the list of restore points, click a restore point created before you started having the problem, and then click Next.

  e. click Finish.

  You can see the following article for reference:

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  You can also try driver restore on the computer and check if it helps.

  To roll back a driver in Windows send the driver to the version that was finally installed for the device. Restoring a driver is an easy way to return a driver for a working version when a driver update fails to fix a problem or maybe even a new problem.

  a. open the Device Manager. To do this, click Start, type device in the area Manager search and then click on Device Manager in the list programs.

  b. right click on the device for which the previous version of the driver is desired and then click Properties.

  c. click the tab drivers.

  d. click on Roll Back Driver.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit ourMicrosoft answers feedback Forum and let us know what you think.

• error code 80072efd, not able to install updates for Microsoft put updated or Anti virus

  I tried to update my laptop with Windows Vista Ultimate Edition with the latest updates of security etc from Windows.  I can't update.  When I try to go to the site it blocks just the pop up with a page download page as mif I am no longer connected to the internet.

  When I try to download updates for the anti-virus software, I get the same problem.  I've followed all the advice available online to those problems, s.  Disabling the firewall and make sure wondowsupdate.com et al. are allowed through the firewall, but nothing helped.

  Please please I need to sort my fear that my laptop is in jeopardy.

  Adam

  It's happened since Sept/Oct 2009... have previously had installed mcafee who started do not work/update

  Believe me: AVG was not installing properly & is not working properly and that you are dealing with an infection hijackware well-rooted here!

  See...

  Cleaning a compromised system
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  Personal data backup (which none should be considered 100% reliable at this point) then format the HARD disk and do a clean install of Windows.  Please note that a repair installation (upgrade AKA on-site) won't fix this!

  HOW to do a clean install of Windows XP: see method 1 and http://michaelstevenstech.com/cleanxpinstall.html#steps in http://support.microsoft.com/kb/978307

  Once installed the clean, you will have the equivalent of a "new computer" in order to take care of everything on the next page before connecting the machine to the internet or one local network (i.e. other computers) otherwise and before using a flash drive or the SD card that is not brand new, or has not been freshly formatted:

  4 steps to help protect your new computer before going online
       http://www.Microsoft.com/security/pypc.aspx

  Other useful references include:

  HOW to get a computer that is running Windows XP Gold (no Service Pack) fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.windowsupdate/MSG/3f5afa8ed33e121c

  HOW TO get a computer that is running Windows XP SP1 (a) or SP2 fully patched (after a clean install)
  http://groups.Google.com/group/Microsoft.public.WindowsXP.General/MSG/a066ae41add7dd2b

  Tip: After getting the computer fully patched, download/install KB971029 manually:http://support.microsoft.com/kb/971029

  NB: No matter what Norton or McAfee free trial which is preinstalled on the computer when you bought will be reinstalled (but invalid) when Windows is reinstalled. You MUST uninstall the trial for free and download/run the removal tool before installing updates, Windows Service Packs, or updates IE and before installing your new anti-virus application (which will require WinXP SP3 must be installed).

  Norton Removal Tool
       FTP://ftp.Symantec.com/public/english_us_canada/removal_tools/Norton_Removal_Tool.exe

  McAfee Consumer product removal tool
       http://download.McAfee.com/Products/Licensed/cust_support_patches/MCPR.exe

  See also:

  Risks & benefits of P2P file sharing
  http://www.Microsoft.com/protect/data/downloadfileshare/filesharing.aspx
  http://blogs.technet.com/MMPC/archive/2008/10/06/the-cost-of-free-software.aspx

  Measures to help prevent spyware
  http://www.Microsoft.com/security/spyware/prevent.aspx

  Measures to help prevent computer worms
  http://www.Microsoft.com/security/worms/prevent.aspx

  Avoid fake security software!
  http://www.Microsoft.com/security/antivirus/rogue.aspx

  If you need help, please start a new thread in this forum:

  http://social.answers.Microsoft.com/forums/en-us/XPRepair/threads

  If these procedures look too complex - and there is no shame in admitting this isn't your cup of tea - take the machine to a local, good reputation and stand-alone computer (that is, not BigBoxStoreUSA or Geek Squad) repair facility.

  Good luck!

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• My Photosmart HP 7510 is not recognized by the computer for printing.

  It was working fine, until what we replaced our router with a v3 TG797n I have reset the printer and reinstalled the software on the compters several times but it still won't print. During the new printer 'Add' processes on the computer will not find the printer, even using the intellectual property. The printers IP is coming as 10.0.0.34, all printing test through the printer directly arrived as work, connected to the corect network.

  When I look at the routers settings it says that he recognizes the device with IP 10.0.0.34, but I have computers (an XP desktop running at the time) and a HP Pavillion Dv6 with Win7 cannot always find and say it should be disabled.

  I downloaded and tried all the HP diagnostic tools, and they all tell me that my printer is not activated on/not connected and offer no alternative.

  I've had the printer for less than 6 months and already he had replaced with a new one because it was defective, and now it gives me a headache.

  In addition, we have updated the Office of Win8 and cannot install printer on that. I checked the lists on this site as to what printers are/are not taken in charge and I didn't know that the HP Photosmart 7510 nowhere mentioned at all.

  And as usual, after trying everything (it has been two weeks now to try different things) and then post online for support, trying one more time and it works like magic again.

  I downloaded the HP printer, troubleshooting thing once again (the third time) run the wizard and found the printer (the second time), downloaded the drivers rather than using the disc (for the second time, the first time that the installation has failed just a t at the end) and intsead to add the IP address of the printer in step "COnnect network printer", I looked at the user name for the device on my router (HPDDxxxx), and which came to the place.

  ********************************************
  EDIT: 02/11/13

  Tried to print something today - once more the computer cannot connect to the printer. Printer is always connected. No parameters had changed since I got it to work.

  Why is this happening! I need to print things! Very close to giving up. However, I doubt that I will get a refund of HarveyNorman, because when they test it out it will connect, and that's enough for them not to say 'no refund '. Ugh.

• Can not install the important updates for Microsoft Office ona HP laptop running Windows Vista Home Premium Service Pack 2

  Hello I am running Windows Vista Home on my laptop.  I have windows update set to download and install updates as they come.  I can't get my computer to update update of security for Microsoft Office Excel 2007 (KB973593)
  Update of security for Microsoft Office 2007 System (KB973704)
  or
  Update for Microsoft Office Word 2007 (KB974561)

  I get the error code 646.  I tried to install all three at once, one at a time and let the computer do as I turn it off.  None of them have worked.  Any help would be wonderful.  Thank you for your time.

  AnyaAlex

  You may have missed this "sticky" post: http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/6e716883-7af4-4a9f-8665-2f4dd57eee8d ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Can not download a standalone update for Acrobat 9.2.0 Pro that works!

  So, I'm tired of supporting the PC that require upgrading to 9.2.0 to Acrobat Pro Extended. I find this message:

  

  So, instead of having to each machine download the update via our very slow internet connection, I thought that I would put it on our file server for installation more Rapids/updates to update on our customers. However, when I try to find this update in a stand-alone format, it's what I find:

  

  At first, I wasn't sure if the voluminous file size difference was that significant so I downloaded and tried to install this update on a machine I had not updated yet. Naturally, he failed. Is there somewhere I can find the 316.6 MB update?

  Hello

  Either use the Adobe Updater to get all patches to go to http://www.adobe.com/support/downloads/product.jsp?product=1&platform=Windows and download 9.1, 9.1.1, 9.1.2, 9.1.3 and 9.2. It should work.

• OfficeJet 7500: HP L7500 Scanner not recognized after last update Win 10

  I have this same problem on all my PC from the most recent Win 10 update 3 March 2016.  All the pc to connect to the printer via a wireless connection with the printer connected to the router using one if the router is NIC ports.  Just to be clear, I just downloaded the latest drivers that you show here for this printer.  If I use the drivers them or earlier, I can't the PARSER must be recognized.  I tried uninstalling and reinstalling the drivers more recent and even tried the original CD (which are Vista drivers).  All to nothing does not.  When I try to scan I get this msg on the screen: "the analysis cannot because another program or computer using the networked HP imaging device.  Try again later. "The error information extened is:"8 (0.18,-2147467259)"[whatever that means]!.

  I also tried physician Scan (latest version).  He concludes by saying: he can not solve the problem.  I did the food printer disonnect, etc. in full agreement with the instructions here.  The PRINTER works fine and it appears in the network installation.  It's the Scanner is not working.  And it worked until the most recent upgrade to win 10.

  I use Kaspersky Antivirus and it is ON and operational during the installation.  What can we do to get the scanner to work? integrated application of win 10 Scan Lele reports that it cannot find the scanner, so it's help.  Until this last Win 10 update, method also used to work.

  Hi @SoCalGuy,

  Glad to hear that you were able to find a way to solve the problem you!

  Please click the "accept as Solution" and the "thumbs up" button up on top of my first response above and other similar issues may find the easiest solution.

• External hard drive is not recognized after Windows Update

  Original title: XP Pro wants to install driver for external hard drive that is Plug-and-Play

  I think that using Windows Update can cause problems (unintentinally or not) for users of Windows XP.

  In a series of accidents with an old computer and reinstall the XP Pro operating system, I discovered that MS Money installing only if it was made before the Windows updates.  (planned obsolescense?) The issue has to do with the removal of the registry AUTORUN file. INF for some new and improved files through Windows Update.  Before the updates, the file exists, and I could install MS money.  After updates, AUTORUN. Missing INF file of the registry.

  Now, I encountered a new problem, and I think that it is also a result of Windows Update.  My external hard drive to IDE, that worked perfectly before on this computer (newer), is no longer recognized and want to reinstall the driver.

  The problem is that it is a Plug-and-Play device, and no driver was needed before updates.  I read somewhere in my many attempts to find a solution that the MS Plug and Play system was replaced by a universal version of this feature (UPNP?)

  It's on a more recent, computer replacement, which came not with a copy of the Windows XP Pro operating system, and I can't just reformat the hard drive and start all over again.

  Someone else has encountered this, and if so, have you found a solution?

  Double Post suite-

  Where is my external hard drive?

  I'm under XP Pro on a Dell Optiplex PC with all the current Windows updates (SP3. Net4, etc..) and last month, I added a USB IDE hard drive. the hard disk enclosure is MASSCOOL, and I used a 250 GB Seagate Barracuda7800. The car worked perfectly until this week. I had the Windows Update critical update automaticlly value and security updates.

  The hard drive has disappeared from "my computer." I tried to plug and unplug in different USB ports, restarted the computer, but continues to receive the "new hardware detected by saying me that new hardware has been detected and that I need to install the necessary driver.

  The problem is that Seagate does not provide any driver for this drive, because it is supposed to be (and was so far) recognized by the Plug-and-Play of Windows XP software. The hard drive enclosure came with a mini CD, but this contains software to use the unit as a back-up, not for storage.

  I can't understand that this change suddenly to believe that something in the Windows updates that have been installed recently changed the command structure, registry files or the drivers themselves.

  I know this is possible, because I've seen what's happened to any program that relied on self. INF file that was originally part of XP. This resulted in programs like Microsoft Money and older versions of MS Office, not being able to be installed by those of us who are not 'technically lit.

  I'm here in left field, or other people have had similar problems? And is anyone know how to solve this dilemma?

  Hello Ron Caley.

  Perform the steps in the link and check.

  Advanced troubleshooting tips for General USB for Windows XP problems

  Hope this information helps.

• Device not recognized - the firmware update does not work

  I opened my package and am trying to get up and running.

  I have a 5 or 6 year, PC - computer Dell Pentium 1.8 ghz running Windows XP - SP 3 and Windows Media Player version 11.

  Plug in my Fuze v02.01.09A - I get a peripheral grateful error

  When I in MSC - my computer does not recognize device

  If I try to run the Sansa update - I get an error message

  "' The following error has occurred: *.

  Your device is in MTP mode (which is not the case).  It can only be updated in MSC mode.  Please disconnect your device and switch to MSC mode if you want to check the updates.

  *****************************************************

  If I go to device MTP - my computer recognizes that I have material foundNew and wants to use the hardware installation CD.  I put in the Rapsody CD that came with my computer and ask Windows to search for the installation of the equipment.  Install a window of Wizzard opens looking software flashing I have an MTP device is plugged in and I see the files to move via photo of 2 folders with files to move files from one folder to another.

  Followed by an error message

  that there was a problem installing this hardware.

  MTP device

  Teh device cannot start - (Code 10)

  Click Finish to launch a troubleshooting tool that can help you solve the problem

  *******

  Next, I get a window all over again.

  This day - the only thing I could do is get a few FM stations with a fairly weak signal.  The sound quality is good - but right now I have a $80.00 hockey puck who isn't even the right shape.

  -In addition, the unit had a load of 3/4 out of the box - and I've not been able to get the charge up at all - after be plugged for 2 hours to a USB port on the back of the computer.  I saw the bar to drop slightly to 10 minutes of FM radio listening.

  You have access to another computer? Try it may be your USB media. Try changing the USB ports on your pc. If its 5-6 years, you can have a port goes wrong.

• Why can I not select a channel update for only security releases?

  It is a development machine. I write software that works in browsers, including yours. I would like to keep your current browser regarding versions, except that the framework that I use does not always keep upward. I'm trying to catch up with your security releases. Which is certainly worth the risk and effort. Your information, explains that "releases" set current channel "includes" provided security. How about an update channel which contains only security releases?

  And also, how do I know the number and properties of an imminent update? I only have a button to install a version. No information of what I install.

  Hello Rick, the esr up-to-date channel ('XR support') will get updates of security only: https://www.mozilla.org/en-US/firefox/organizations/faq/