firewall configuration

Similar Questions

• Octoshape streaming services: could not bind to the local host. Please check your firewall configuration

  Original title:

  Octashape streaming system

  Hello

  A dialog box appears on my screen:
  Octoshape streaming services: could not bind to the local host. Please check your firewall configuration

  What should I do?

  And if this does not work between the firewall what is the solution?

  Thank you!

  [Moved from the community centre of Participation]

  You seem to have installed a useless program, Octoshape.

  http://www.bing.com/search?q=Octoshape

  You should be able to remove it from programs and features (or the list of installed programs, depending on your version of Windows.)

  Don

• Firewall configuration documents Module WS-SVC-FWM-1

  Hello

  Does someone know the documents a good configuration for WS-SVC-FWM-1.

  We are in the process of deploying this cat 6509 module, we intend to deploy the virtual firewall security context feature that has its own security policy and interface.

  And I am able to use this module FW as routed mode or Transparent.

  So I have my search for document will contact clearly these two modes and how to configure it.

  Thanks in advance for the help.

  The FWSM Config guide is good enough.

  http://www.Cisco.com/en/us/products/hw/switches/ps708/products_module_configuration_guide_book09186a00802c303c.html

• Quicken 2011 software cannot connect to the internet, points to a firewall configuration issue.

  I am running Vista and other programs work. Any ideas on what I should do? How do Dell firewall. I am concerned about lowering my firewall settings.

  Hello

  1. could you give us the exact error message?

  You can have a look at the following link on the Quicken support Web page.

  Error when using Online Services: OL-297

  http://Quicken.Intuit.com/support/articles/online-services/download/4151.html

  For the Dell Firewall setting, you can visit the Dell support Web site:
  http://support.Dell.com/

  For more information about Windows Firewall, see:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings

  I hope this helps.

• No persistent personal firewall configuration to the ESXi host is restarted

  I followed the instructions in this KB http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2007381

  My host is restarted still does not add my cutom firewall settings... If I use the shell and manually run esxcli updating of network firewall adds it.

  I'm under ESXi 5.1, according to the KB you add updating of firewall of network esxcli to the /etc/profile.local that I have confirmed that my xml is copied from my data store.

  You can try to add to /etc/rc.local.d/local.sh instead and see what happens...?

  / Rubeck

• Cannot change the host firewall configuration

  Hello

  I'm playing with a small lab environment and I see this problem.

  I have 1 vCenter Server Appliance and 2 ESXi hosts.

  The two hosts were 5.0 ESXi hypervisor (free version).

  I've done this.

  Replace licenses Ent +. Upgrade 1 hosts to version 5.1.

  Now, if I try to edit a firewall rule in the host improved from the vSphere client connected to the vCenter, I get this error.

  ' Call 'HostFirewallSystem.DisableRuleset' of object "firewallSystem-41"on vCenter Server 'localhost' failed."

  I tried to remove and time to host the vCenter but the error persists.

  Anyone know what is the problem here?

  Thanks in advance,

  elgreco81

  There are a few changes in the behavior of the firewall in 5.1...

  Try with this KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2037544

• For Oracle 11.2.0.1.0 Windows Firewall configuration

  I need documentation for correct together how the windows firewall.
  This oracle 11.2.0.1.0 works correctly.
  
  Version of the operating system: Windows Server 2003 64-bit
  Oracle version: 11.2.0.1.0 (windows x 64)

  Hello

  I need documentation for correct together how the windows firewall.
  This oracle 11.2.0.1.0 works correctly.

  Its seems you encounter problem while accessing the company Manager. If its so add your url em of internet Explorer exceptions to allow the connection.

  If you are facing when connecting to the database, then follow technical note:
  * What Ports need to be opened in the firewall for Oracle DB connections? [ID 416236.1] *.

  Hope help :)

  Kind regards
  A H E E R X

  Published by: ora_tech on October 10, 2010 22:59

• the firewall configuration

  Hi, I m, facing difficulties to connect creative cloud because the internet connection of my company. What domain, subdomains and port I have to open to work properly with the CTC? Internet problem

  Hi Enrique.

  Can you please try the following article that details around the Port/Url combination for stocks.

  Using creative cloud | All creative cloud package

  See you soon,.

  Michael Sharma

• ICW fails to configure the firewall on Small Business Server 2003 R2

  Can anyone help please when I run the wizard of internet connection on a Small Business server 2003 R2, it fails on the firewall configuration, when I check the log I get the errors below. He was going well until my network card for my internet connection has failed and I replaced and set up another card I made sure, there is nothing in Device Manager, even in hidden for the old devices map

  C:\Program Files\Microsoft Windows Small Business Server\Networking\ICW\wizrfire.dll, version 5.2.2893.0
  call CRFireCommit::ValidatePropertyBag (0x1de5fa8).
  UPnP URL is http://192.168.1.1:5000 / rootDesc.xml
  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().
  Call the GetServiceConfigURL for WANIPConnection () returned ok.
  Router supports WANIPConnection
  Service config URL ctl / http://192.168.1.1:5000 / IPConn
  Error 0 x 1 returned the call to CRFireCommit::ValidatePropertyBag no RRAS NAT Interface Public, the Basic Firewall is not configured. ()

  The call for initialization of device Upnp () returned ok.
  Error 0 x 1 returned by the call to HttpGetDeviceXML().
  Error 0 x 80004005 returned by the call to GetServiceConfigURL for WANPPPConnection().

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum of the Small Business Server. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/smallbusinessserver/threads

• Helps to configure the pix firewall 507e for e-mail access

  Dear experts,

  I called our provider cisco and ask for technical help regarding our current problem as we know on our set-up.

  She told me to convey my concern to the Cisco TAC. My friends told me to post it here under discussion Netpro.

  I am writing today to ask a few questions about my pix 506 firewall configuration.

  To give the implementation Details pls find below and attached seizures of the show tech command.

  We have subscribed the service DSL and Singtel give us 2 addresses valid public IP that is 203.125.100.246 255.255.255.252.

  I used 203.125.100.246 for my external interface of my firewall pix and singtel assign 203.125.100.245 to the DSL router. In this case, we will only use PAT for internet connection.

  Currently he works very well our Mail Server is resided in the Singtel Office having the ip address of 165.21.111.22. Not work that we can receive and deliver electronic mail on the internet, and we can also surf the internet.

  Now we intend to put our mail in our own network server, because sometimes we encounter slowness on receiving and sending emails. Pls check on the IP address below

  Our LAN IP address is 192.168.1.X 255.255.255.0

  default gateway, which is the IP address of the firewall pix inside interface is 192.168.1.1

  The new mail server IP address is 192.168.1.4.

  Here's what I've done so far.

  I created a static mapping for my mail server is here

  public static 203.125.100.246 (inside, outside) 192.168.1.4 mask subnet 255.255.255.255 0 0

  and modify the access list to allow smtp on our networks.

  192.168.2.0 ip access list ACL_OUT permit 255.255.255.0 any

  ACL_OUT list access permit icmp any host 203.125.100.246

  ACL_OUT list access permit tcp any host 203.125.100.246 eq smtp

  ACL_OUT list access permit tcp any host 203.125.100.246 eq pop3

  ACL_OUT list access permit udp any host 203.125.100.246 EQ field

  Access-group ACL_OUT in interface outside

  After doing it... I have loss all the internet connection, the email does not work... so I deleted immediately. because it causes network failure.

  I have rather edit it and create a static map like this.

  public static 203.125.100.246 (exterior, Interior) 192.168.1.4 mask subnet 255.255.255.255 0 0

  and modify the access list to allow smtp on our networks.

  192.168.2.0 ip access list ACL_OUT permit 255.255.255.0 any

  ACL_OUT list access permit icmp any host 203.125.100.246

  ACL_OUT list access permit tcp any host 203.125.100.246 eq smtp

  ACL_OUT list access permit tcp any host 203.125.100.246 eq pop3

  ACL_OUT list access permit udp any host 203.125.100.246 EQ field

  Access-group ACL_OUT in interface outside

  Saw what it did not cause a failure of network or interruption. I thought that it will already work with the config, I keep it and this is the current config now... But when I change the POP and SMTP settings so that it points on 192.168.1.4 which is the new mail server on our LAN. his does not work.

  To this day, we are in a discussion with my boss or not possible to create a static mapping on our new mail server address 192.168.1.4 to 203.125.100.246 which is already assigned as external IP address and is used for PAT.

  We are asking your help to know how to set up our internal mail server statically match our public IP address that is already used for PAT.

  Please check attached the tech release see the.

  Thank you very much!

  I'd appreciate your quick response.

  Your truth.

  Dennis Pelea

  Dennis,

  Can you please send to me your configuration full pix (unscrew sensitive information) to [email protected] / * /

  I am puzzled, why this configuration does not for you. I have several clients who use a public ip address for external intf more than several other services that use this single ip address.

  Thank you / Jay

• SRX5308 IPsec Config Mode - [IKE] ERROR: no configuration is found for...

  I have a real simple setup for Client-to-gateway VPN installation. Base tunnels seem to work fine, but when I try to install

  a policy of Mode Config I get an error in the connection and cannot ping resources on the local VPN network.

  The local IP address at the end of check-in Mode Config is 192.168.1.0. The manual says to leave the field empty and it will default to the address of the gateway, which is 192.168.1.1. If I leave the field blank this wrong address gets automatically enrolled and if I try to manually enter the right one I get an error saying it's an invaild address?

  

  Then when I connect, I get the following error:

  

  I think that is the question. How to work around this problem or do it properly? The manual is not any help and I googled my old brian dead.

  Thanks for any idea that you can give me!

  CC

  Thanks for the reply okadis and thanks for the link to this site, it is very useful!

  I was able to find a solution. Turns out that the works of very good firewall configuration. All I had to do was use the remote configuration of the CLIENT as the LAN address 192.168.1.0, and then everything worked.

  Now, for me, it's 2 "bugs" in the SRX5308 of Mode Config record:

  1 192.168.1.0 is not the address of the Local network subnet, it is 192.168.1.1; The manual says if left blank by default subnet LAN, which it isn't, it's default 192.168.1.0

  2. it won't let you enter ANY ip address here. It must be left blank.

  Maybe I'm missing something here, but it works perfectly after using what is there in the end customer.

  Should have been simple. Well...

  CC

• disable the firewall for Spades?

  But if you do that you are not protected. Do you suppose turn off while you are playing, then turn it on again when done? Looks like a solution and not a solution... other suggestions?

  1. Open firewall configuration panel
  2. Click "allow a program or a hollow Windows Firewall feature.
  3. Click on "change settings".
  4. Click "allow another program...". »
  5. Type "C:\Program Files\Microsoft Games\Multiplayer\Spades\shvlzm.exe " in "file name:" field
  6. Click on 'Open', 'Add', 'OK '.

  Now you should be able to play Spades and still be set by the firewall. Microsoft Student Partner

• Error: The installer cannot set Windows XP required configuration information during the upgrade to Windows XP Home SP3 of Windows XP Pro.

  Original title: OEM Windows XP Home SP3 update XP Pro

  Here is a compilation of the messages from another forum regarding
  My problem:
  ---------------------------------------------------------------

  I'm trying to upgrade a Windows XP Home Sp3 OEM system to
  Windows XP Pro. (There are a few Pro features
  that are not available in the House I now need: (1) the files offline and
  (2) an add-on available for free to Onenote 2007, Top2onenote, requires a Pro).
  I don't want a clean install, but an upgrade. I bought a Windows XP Pro
  Upgrade CD on Ebay that was Windows XP Pro
  Gold (v2002). I'm sure that's true for the following reasons:

  It has been listed as an upgrade, but the CD is not labeled "Upgrade".
  It seems very authentic with all Microsoft holography.
  He came in the standard package of Windows XP (without box),
  and it was sealed.
  The name of volume for the CD is WXPFPP_EN. The Internet,.
  It is the retail of Windows XP Pro RTM (gold)!

  Here are things I tried initially.

  (1) I tried to upgrade to Pro from the purchased CD. It is immediately
  has refused to upgrade indicating the upgrade OS (Pro) is older than the
  installed OS (home)...

  (2) I read about "slipstreaming". "Slipstreaming" allows to integrate
  a service pack with an earlier version of the operating system. I created a
  upgrade XP Pro SP3 with Nlite slipstreamed CD image (and
  Autostreamer later, but it made no difference) from the purchased CD
  and a file containing SP3.

  After you burn the CD and start the upgrade
  (Windows installation), the upgrade process
  product through "information collection."
  "Dynamic update" and "Preparation of Installation" with
  no problems. My computer restarted and returned to
  "Installation preparation". A progress bar called 'Progress '.
  quickly filled to about 90% and the hanging system
  at that time there for about 15 minutes.
  Then, I got the following error message:

  Setup cannot set the required Windows XP configuration
  information. This indicates an internal Setup error.

  This is where I am stuck. I had to leave the installation at this point.
  My drive is starts raining and I had to restore a backup.

  (3) just for the heck of it, I formatted my hard drive and
  reinstalled my original OEM XP Home SP3 OS (no clean up, no user file).
  I immediately used my XP CD slipstreamed Pro to try one
  upgrade to XP Pro and IT WORKED! I need to find out why the
  properly clean XP Home OS upgraded to XP Pro but my pre-existing
  (with the files users, drivers, etc..) XP Home OS does not level
  successfully to XP Pro.
  -------------------------------------------------------------

  Another post:

  Yet once, today, I installed a new copy of OEM Windows XP Home Sp3.
  I continue with installation of all the essential and the add-on
  pilots (essentially all my original version). Then, I
  set up a network connection and firewall. With this configuration,.
  I ran the Pro XP slipstreamed SP3 CD. The upgrade to XP Pro
  success (even if the upgrade not configured my graphics
  card properly). I guess my current problem is either the registry,
  the WINDOWS, some user file or parameter file.
  ---------------------------------------------------------------

  Another post:

  I made a file and the backup of the folder C:\Windows folder
  on my system that is pre-existing (OEM XP Home Sp3). I also did a
  separate the backup the State of the 'system' on my pre-existing system.
  These are added my full image backup of her pre-existing
  system a month ago.

  I did a backup image of my system (minimum fees OEM XP Home
  SP3 with all the original installed drivers over a network configured
  connection and a firewall configured). This system will upgrade
  XP Pro with XP Pro SP3 slipstreamed CD successfully.

  Experiment 1:

  I've restored my minimum system. I then restored the C:/Windows folder
  and the State of the pre-existing system backup system. A startup
  has managed (with a minor irritant). I had to activate Windows.
  Then, I tried upgrading the slipstreamed XP Pro processor. He stopped
  at the same place during the upgrade and gave the same error as before:

  Setup cannot set the required configuration information Windows XP.
  This indicates an internal Setup error.

  Experiment 2:

  I've restored my minimum system. I then restored the system state only
  the backup of the pre-existing system. After startup I was asked to
  activate Windows, but answer Yes to the question would be to disconnect me
  the system. I couldn't get connected to try the XP Pro upgrade.

  Experience 3:

  I've restored my minimum system. I then restored only the C:/Windows
  the backup of the pre-existing system folder. Once again, as in experiment 1,
  the upgrade failed at the same place with the same error message.

  ----------------------------------------------------------------

  Before the experiment 3, I hoped that 3 experience would succeed so I
  could conclude that I had a registry problem. I'm not sure now.
  I don't know what to try next. Take the minimum system and reinstalling
  my files of the user is not an option that my hard drive has over 200 GB of
  programs! If I restore all files and folders of my pre-existing
  I would still have backup to restore a system state the reliable (read the registry).
  ---------------------------------------------------------------------

  Sorry for the length! If anyone has any ideas I would appreciate your responses.

  Thank you

  Hello

  This problem can occur if a piece of hardware that is installed on your computer is not compatible with Windows XP.

  For more information, see this link:

  Error message: Setup cannot set the required Windows XP Configuration information

  Hope the helps of information.

• Firewall blocking of communication?

  How can I get my printer wireless to show 'online' instead 'offline '? The printer is works very well with the other two laptops, but my laptop does not communicate with the printer. My guess is that there are a few settings the communicaton of blocking because of firewall configuration? I spent hours trying to figure out this problem.  I can not link or download information, such as itunes or update certain programs, such as TurboTax. It's probably easily fixed, but a setting somewhere blocks all these different programs. Thank you for your help.

  You should have asked your question in forum Windows 7 networking and online (rather than the "forum security, confidentiality and XP user accounts").

  Networking in Windows 7 is a bit more difficult than for XP (because Windows 7 has added some security devices), but I'll see what I can do for you.

  When you say that the difficulty has always been like that, does include printing problem as long as access to the iTunes store and TurboTax?

  How did you install the printer?  The installation was successful (you can print a test page)?

  HP has a 'HP printer install wizard for Windows 7' that might help.  You can uninstall the printer first--> http://h10025.www1.hp.com/ewfrf/wc/document?docname=c02259020&tmp_task=useCategory&cc=us&dlc=en&lc=en&os=4063&product=3919449&softwareitem=oj-100441-1&sw_lang=#N1062

  Here are the suggestions for Apple to problems connecting to the iTunes store.  If they fix your ability to connect to iTunes, they'll probably also fix the fitting of TurboTax: http://support.apple.com/kb/HT1527

• Firewall turns off after Windows XP starts

  Hello

  I had the virus that has not seen the MS and MS Safty Scanner MS Security Essentials (MSE) malicious software removal (the value always protect).  It prevented the MSE to run.

  I downloaded Malwarebytes (no Scan option, no firewall or real-time).  He found the virus, the list is below shows what virus found where.  I uninstalled and installed a new MSE, he says that the machine is clean.

  Task bar indicators show my firewall consistantly goes off about 45 seconds after the start to the top, then turn about 30 seconds after the beginning upward.  (I note firewall controls are frozen before it turns off, it can be turned off from the start, just about 45 seconds for the PC to detect).

  The firewall configuration is does not (unknown error) while the firewall is disabled and setting off the power before.

  I'm running a fully updated MS Windows XP 32-bit, bridge 2005,.

  Now, I already tried a lot of things, including about six analyses of various companies.  I suspect there is still a compenent that nobody yet knows how to look.  Is there anyway to get MS to analyze my system to see what is out there, so that they can identify the virus, I think I have MSE reports, but there is no button to tell MS my computer is infected, so I think that there is no report.

  I'll probably have to find another XP operating system going offline, but my piece of bridge came not with all drives, so if there are unique drivers they may not work with windows 7 or later.

  Report of MBAM who finds a virus:

  Malwarebytes' Anti-Malware 1.44
  Database version: 3798
  Windows 5.1.2600 Service Pack 3
  Internet Explorer 8.0.6001.18702

  2010-02-26 20:39:17

  MBAM-log-2010-02-26 (20-39-17) .txt

  Scan type: Full Scan (A:\| C:\| D:\| E:\| F:\| G:\| H:\| I:\| J:\|)
  Objects scanned: 241411

  Time elapsed: 1 hour (s), 0 minute (s), 37 second (s)

  Memory processes infected: 0
  Memory Modules infected: 0
  Registry keys infected: 4
  Registry values infected: 1
  The infected registry data: 2
  Folders infected: 0
  Infected files: 0

  Process memory infected:
  (No malicious items detected)

  Memory infected:
  (No malicious items detected)

  Infected registry keys:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {1d4db7d2-6ec9-47a3-bd87-1e41684e07bb} (Adware.MyWebSearch)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {b64f4a7c-97c9-11da-8bde-f66bad1e3f3a} (Rogue.WinAntiVirus)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Software avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\Software\avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  The registry is infected:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\toaagomm (Trojan.FakeAlert.Gen)-> quarantined and deleted successfully.

  Infected registry data items:

  HKEY_LOCAL_MACHINE Center\AntiVirusDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Center\FirewallDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  Infected files:
  (No malicious items detected)

  Hello

  I had the virus that has not seen the MS and MS Safty Scanner MS Security Essentials (MSE) malicious software removal (the value always protect).  It prevented the MSE to run.

  I downloaded Malwarebytes (no Scan option, no firewall or real-time).  He found the virus, the list is below shows what virus found where.  I uninstalled and installed a new MSE, he says that the machine is clean.

  Task bar indicators show my firewall consistantly goes off about 45 seconds after the start to the top, then turn about 30 seconds after the beginning upward.  (I note firewall controls are frozen before it turns off, it can be turned off from the start, just about 45 seconds for the PC to detect).

  The firewall configuration is does not (unknown error) while the firewall is disabled and setting off the power before.

  I'm running a fully updated MS Windows XP 32-bit, bridge 2005,.

  Now, I already tried a lot of things, including about six analyses of various companies.  I suspect there is still a compenent that nobody yet knows how to look.  Is there anyway to get MS to analyze my system to see what is out there, so that they can identify the virus, I think I have MSE reports, but there is no button to tell MS my computer is infected, so I think that there is no report.

  I'll probably have to find another XP operating system going offline, but my piece of bridge came not with all drives, so if there are unique drivers they may not work with windows 7 or later.

  Report of MBAM who finds a virus:

  Malwarebytes' Anti-Malware 1.44
  Database version: 3798
  Windows 5.1.2600 Service Pack 3
  Internet Explorer 8.0.6001.18702

  2010-02-26 20:39:17

  MBAM-log-2010-02-26 (20-39-17) .txt

  Scan type: Full Scan (A:\| C:\| D:\| E:\| F:\| G:\| H:\| I:\| J:\|)
  Objects scanned: 241411

  Time elapsed: 1 hour (s), 0 minute (s), 37 second (s)

  Memory processes infected: 0
  Memory Modules infected: 0
  Registry keys infected: 4
  Registry values infected: 1
  The infected registry data: 2
  Folders infected: 0
  Infected files: 0

  Process memory infected:
  (No malicious items detected)

  Memory infected:
  (No malicious items detected)

  Infected registry keys:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {1d4db7d2-6ec9-47a3-bd87-1e41684e07bb} (Adware.MyWebSearch)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Ext\Stats\ {b64f4a7c-97c9-11da-8bde-f66bad1e3f3a} (Rogue.WinAntiVirus)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Software avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  HKEY_CURRENT_USER\Software\avsoft (Trojan.Fraudpack)-> quarantined and deleted successfully.

  The registry is infected:

  HKEY_CURRENT_USER\SOFTWARE\Microsoft\Windows\CurrentVersion\Run\toaagomm (Trojan.FakeAlert.Gen)-> quarantined and deleted successfully.

  Infected registry data items:

  HKEY_LOCAL_MACHINE Center\AntiVirusDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  HKEY_LOCAL_MACHINE Center\FirewallDisableNotify (Disabled.SecurityCenter)-> Bad: (1) Good: (0)-> quarantined and deleted successfully.

  Infected files:
  (No malicious items detected)

  Please update a single thread... http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-system/Windows-XP-firewall-turn-off/394cce83-4ca8-4b47-b113-0cb59adf2da9