Firewall configuration documents Module WS-SVC-FWM-1
Hello
Does someone know the documents a good configuration for WS-SVC-FWM-1.
We are in the process of deploying this cat 6509 module, we intend to deploy the virtual firewall security context feature that has its own security policy and interface.
And I am able to use this module FW as routed mode or Transparent.
So I have my search for document will contact clearly these two modes and how to configure it.
Thanks in advance for the help.
The FWSM Config guide is good enough.
Tags: Cisco Security
Similar Questions
-
What is the latest IOS version supported WS-SVC-FWM-1?
Dear all,
Is it possible to set up final IOS 4.1. series with ASDM in the WS-SVC-FWM-1 firewall module?
Please suggest on the last support for IOS version on the WS-SVC-FWM-1 firewall.
Thanks in advance,
Selva.
Hi Selva,
FWSM uses a different operating system (not IOS) and the latest version is 4.1 (15). You can go to the following URL
Choose 4.1 (15) and download it from here.
Latest version ASDM is 6.2 (3). You can download here:
Thank you!
Gerard
-
Original title:
Octashape streaming system
Hello
A dialog box appears on my screen:
Octoshape streaming services: could not bind to the local host. Please check your firewall configurationWhat should I do?
And if this does not work between the firewall what is the solution?
Thank you!
[Moved from the community centre of Participation]
You seem to have installed a useless program, Octoshape.
http://www.bing.com/search?q=Octoshape
You should be able to remove it from programs and features (or the list of installed programs, depending on your version of Windows.)
Don
-
Someone at - it a process of using planning for configurations document, like the old document BR.100?
Ben
Please refer to Note "Generating BR100 referred to report in Oracle 11i, version 12.0 and 12.1 version planning (Doc ID 826324.1)"
It has:
- the hotfix level required
- an instruction step by step (BR100StyledReportDocument.pdf)
- a pattern of predetermined OPE (BR100_Layout.rtf)
The latest documents are included in the attachment 'BR100StyledReport.zip '.
More useful planning references are available in ' Information Center: planning, Oracle E-Business Suite (Doc ID 1551167.2).
Good luck
Larson
-
Hello
I'm having difficulties to configure my modules as target of the warehouse or the Data Source. I CAN NOT see the radio button 'Identifying the type of module' in the first page of my Design Center creation module for giving me the chance to put.
https://www.dropbox.com/s/0d4n8ueujmhe2uf/create.jpg
That's why I get this obvious error at the time of the deployment in the Control Center:
Impossible to use the schema DP_TGT (my target schema Module) by a location target DP_TGT_LOCATION because it is already used as a target by OWB. MY_Worksapce. (My name in the repository). You want to register DP_TGT_LOCATION as a single source? (and give me OK and cancel the choices that are unnecessary)
https://www.dropbox.com/s/nf4rp8p5ycztmku/TTT.jpg
https://www.dropbox.com/s/exh2hqf6p8l0c78/TGT.jpg
MY QUESTION:
-> Why I can't find the setting for Source/target module in the page Wizard? It suppose to be in the first module by Wizard creation page, just before the Description? !!! and it's gone!
-> Is there anywhere else I can fix this?
I even tried to reinstall my Warehouse Builder, still no luck!
I followed the written since ETL here exercise:
My machine: win7 64 bit, DB11g r2, r2 stand-alone, BI 1.1.1.7, of WHB11g.
Appreciate your help guys.
Hami
He is the author of the question:
This weird issue has finally been resolved.
Couple notes:
-in 11 GR 2 you do not select a module as Source/target in the page Wizard. (not sure where is it defined yet)
-do not follow the old tutorial, instead that follow for the new version:
OWB 11 GR 2 OBEs.
And I guess you have to give permission to your schema specified target to select your source.
I will not remove the post in case where someone else face same issue.
Have fun guys.
-
Configure the module of firepower ASA IP address
Hello
today I tried to configure the IP address of the late ASA power module. But unfortunately I failed. The firewall is in the direction of the situation and also do have not any router on the LAN. So, I stop the management interface and configure the IP of firepower on the network server management. But unfortunately I can not ping the gateway IP address that is actually one of the interface of the firewall. It is the series x 5525 firewall. So this isn't a any interface dedicated to management of firepower. It would be nice to know where I made the mistake? I recharge and recovery of the module and I consider the State as always state of recovery. So my question is looking for there is a problem with the module itself?
Module status
SH module
Model serial number of map mod
---- -------------------------------------------- ------------------ -----------
0 ASA 5525 - X with SW, GE, 1 GE Mgmt, AC 8 data
IPS unknown n/a
cxsc unknown n/a
SFR unknown n/aMAC mod Fw Sw Version Version Version Hw address range
---- --------------------------------- ------------ ------------ ---------------
0 f 1.0 2.1(9)8 9.2(3)
ips N/A N/A
cxsc N/A N/A
sfr N/A N/AThe Application name of the SSM status Version of the Application of SSM mod
---- ------------------------------ ---------------- --------------------------
IPS unknown current Image number does not apply
cxsc unknown No. current Image does not applyData on the State of mod aircraft compatibility status
---- ------------------ --------------------- -------------
0 to Sys does not apply
IPS does not is not Applicable
cxsc does not not Applicable
SFR recover not ApplicableConfig firewall Interface
#Interface IP-Address OK? Method State Protocol
GigabitEthernet0/0 10.101.106.115 YES CONFIG upward upwards
GigabitEthernet0/1 10.106.106.115 YES CONFIG upward upwards
GigabitEthernet0/2 10.103.254.254 YES CONFIG upward upwards
GigabitEthernet0/3 10.0.210.254 YES CONFIG upward upwards
GigabitEthernet0/4 10.100.254.254 YES CONFIG upward upwards
GigabitEthernet0/5 10.107.253.115 YES CONFIG upward upwards#interface GigabitEthernet0/1
Speed 1000
full duplex
nameif Server
security-level 70
IP 10.106.106.115 255.255.0.0Fire power management configuration
Host name: 1 Swiss francs
Configuration Management InterfaceConfiguration IPv4: static
IP address: 10.106.251.253
Network mask: 255.255.0.0
Gateway: 10.106.106.115IPv6 configuration: Stateless autoconfiguration
Configuration of DNS:
Domain: XXX.local
Search:
XXX.local
DNS server:
10.101.251.2
10.201.251.2Any help will be greatly appreciated.
Thank you
Sari
Sari,
Even if there is not a physical module services fire power management port, it uses Management0/0 port to connect to the module of SFR. If you like on the same VLAN as your server VLAN on the SAA plug Management0/0 port on a switch that is sharing the network server VLAN and give the module SFR an IP address on the same subnet.
Make sure that you remove the statement under interface Management0/0 nameif. Here is an example:
interface Management0/0
management only
No nameif
security-level 100
no ip address -
Thermocouple configured in module module-9221
Hi all!
Nice day!
I try to configure thermocouples type K 6 through the NOR-9221 analog input module and chassis cDAQ-9174. I'll be able to get the direct temperature readings outside this module not being a thermocouple module? Otherwise? Please suggest me how to get the temperature for this add-on module-9221 directly! Quick help will be very appreciated!
Best regards!
Tajim
To build on what the broken arrow, the 9221 is really not at all optimal for measurement by thermocouple. Most of the measures by thermocouple are between 0 to 80 mV. The module 9221 is a 12-bit with a range of ±60V module. The width of the code for this module is about 15 mV and your accuracy is 156 mV. All your thermocouple readings will be lost in the noise for this add-on. I would recommend the 9211 or the 9213 for measurement by thermocouple, because each has CYC and is specially designed for thermocouples. If you want to try an external amplifier, which can run, but you will probably need something that can amplify from 0 to 80 mV to 0 - 60V.
Kind regards
-
cRIO, FPGA, portability to different configuration of module e/s
Hello people!
For my research project, I need support.
I have to implement the NO-tutorial: "CompactRIO Control Design and Simulation Tutorial" on different hardware.
My cRIO-9004 is no problem and the NI9104 chassis is the same.
Occure in problems with the config of the i/O-Modules:
Tutorial-config: Slot5 = NI9505, Slot8 = NI9221
MyDevice-config: Slot1 = NIcRIO-9215, Slot2 = NI9263, Slot3 = NI9217, Slot4 = NI9474, Slot5 = NIcRIO-9423
I think that there should be a smart way to port this programm for a different config and change the I/O-link with another module without neckshoot the programm. do not know how, because I am a newbie of LabView.
your ff
Hi ffelix,
The tutorial works with a 9505 (H-Bridge for Servos) movement Module and a Module of the 9221.
In your configuration, you HAVE some, a zone of OCCUPATION, an RTD, a DI and a Module, but none Module movement to control a Servo.
So if you plan to do a similar Assembly, you must use the AO Module or a Module (PWM) with an external driver circuit to control a motor. And rather than use the software NOR Motion, which I think is used in the tutorial, you will need to program the motor by yourself from scratch part on.
Christian
-
I am running Vista and other programs work. Any ideas on what I should do? How do Dell firewall. I am concerned about lowering my firewall settings.
Hello
1. could you give us the exact error message?
You can have a look at the following link on the Quicken support Web page.
Error when using Online Services: OL-297
http://Quicken.Intuit.com/support/articles/online-services/download/4151.html
For the Dell Firewall setting, you can visit the Dell support Web site:
http://support.Dell.com/For more information about Windows Firewall, see:
http://Windows.Microsoft.com/en-us/Windows-Vista/Understanding-Windows-Firewall-settings
I hope this helps.
-
BitLocker, configure the module TPM after encryption.
Hey,.
I encrypted my hard drives in my pc with BitLocker, but I have now ordered a TPM chip I have planed for use with BitLocker.
I think I know how to upgrade the system drive (c) to the specification of the TPM module, but I don't know how to upgrade other readers 'internal' encrypted to TPM.
https://mrhorn.com/WP/posts/BitLocker-with-TPM-pin-USB-StartupKey/
On this site, I discovered how to change the secure TPM system drive.
It feels a little awkward and sad decipher and then re-encrypt with TPM to do together with the TPM module. (X takes hours to encrypt a disk of 1 TB)
This site I found later and I hope that it would work to "fix" the other internal drives to the TPM + Pin specifications without decryption...
http://mikebeach.org/2011/12/08/how-to-enable-BitLocker-tpmpin-after-encrypting-hard-drive/
I thought that theses commands should work then
manage-bde-protectors-add c: - TPMAndPIN
And when I put the (c :)) Windows Media Player to TPM + Pin + StartupKey, '123456789' represent the pin code.
manage-bde -protectors -add C: -TPMandPINandStartupKey -tp 123456789 -tsk E:
manage-bde -protectors -add C: -RecoveryKey F:Thanks for reading, and i hope i will get a qualified answer in not to long time....Cheers!
Hello
I suggest you to send your request in the TechNet Forums to improve assistance in this regard. They are experts in your field of investigation and would be in a better position to answer your concerns.
It will be useful.
-
No persistent personal firewall configuration to the ESXi host is restarted
I followed the instructions in this KB http://KB.VMware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 2007381
My host is restarted still does not add my cutom firewall settings... If I use the shell and manually run esxcli updating of network firewall adds it.
I'm under ESXi 5.1, according to the KB you add updating of firewall of network esxcli to the /etc/profile.local that I have confirmed that my xml is copied from my data store.
You can try to add to /etc/rc.local.d/local.sh instead and see what happens...?
/ Rubeck
-
Cannot change the host firewall configuration
Hello
I'm playing with a small lab environment and I see this problem.
I have 1 vCenter Server Appliance and 2 ESXi hosts.
The two hosts were 5.0 ESXi hypervisor (free version).
I've done this.
Replace licenses Ent +. Upgrade 1 hosts to version 5.1.
Now, if I try to edit a firewall rule in the host improved from the vSphere client connected to the vCenter, I get this error.
' Call 'HostFirewallSystem.DisableRuleset' of object "firewallSystem-41"on vCenter Server 'localhost' failed."
I tried to remove and time to host the vCenter but the error persists.
Anyone know what is the problem here?
Thanks in advance,
elgreco81
There are a few changes in the behavior of the firewall in 5.1...
Try with this KB: http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=2037544
-
For Oracle 11.2.0.1.0 Windows Firewall configuration
I need documentation for correct together how the windows firewall.
This oracle 11.2.0.1.0 works correctly.
Version of the operating system: Windows Server 2003 64-bit
Oracle version: 11.2.0.1.0 (windows x 64)Hello
I need documentation for correct together how the windows firewall.
This oracle 11.2.0.1.0 works correctly.Its seems you encounter problem while accessing the company Manager. If its so add your url em of internet Explorer exceptions to allow the connection.
If you are facing when connecting to the database, then follow technical note:
* What Ports need to be opened in the firewall for Oracle DB connections? [ID 416236.1] *.Hope help :)
Kind regards
A H E E R XPublished by: ora_tech on October 10, 2010 22:59
-
The two ports must be open for Enterprise Manager Grid Control to work through a firewall, http/4889 and https/1159, or have I set up as one or the other?
Default port for Enterprise Manager Grid Control
The default port for the grid control is 4889. This is the port not secure, which is the HTTP port.
If 4889 is not available, then the first available in the range 4889 to 4897 free port is
selected. The default secure port, it is the HTTPS port, is 1159. If not available, 1159
then the first available in the range 4898 to 4908 free port is selected.Please see the requirements of ports of Enterprise Manager firewall from doc below
http://download.Oracle.com/docs/CD/B16240_01/doc/install.102/e10953.PDF
-
Hi, I m, facing difficulties to connect creative cloud because the internet connection of my company. What domain, subdomains and port I have to open to work properly with the CTC? Internet problem
Hi Enrique.
Can you please try the following article that details around the Port/Url combination for stocks.
Using creative cloud | All creative cloud package
See you soon,.
Michael Sharma
Maybe you are looking for
-
"New Contact"does not shine now for e-mail address number 6
-
HP Support Assistant - telephone number incorrect for the Germany
Let's not the phone number indicated in HP Support Assistant for the Germany. Under the button 'Contact support' location Germany selected, 'call HP"indicates phone number 01805 65 21 80. This phone number no longer in service. The right phone number
-
I get cannot load the icloud preferences panel and cannot access the photos
I upgraded to Yosemite and now my photos do not recognize my icloud shared photos. I tried to open the icloud preferences to ensure that pictures are always enabled but I get "unable to load the icloud preferences panel" every time. Suggestions?
-
DigitAll photo - software HP Photosmart Essential
I recently installed the software of HP Photsmart essential 3.5 V. Digital photo software continues to crash
-
I have an old XP computer I want to give to a college student, but he is slow so I reformatted the drive and reloaded original XP software. I had planned to charge all service packs to make it current. When you try to load the Service pack 1, I get