FireWire expansion for Touchsmart 610 1130f

Hello

I have a 610 1130f Touchsmart, I would install a firewire port. Motherboard card I see I have available pci expansion slots, also other posts, I think this pci card is the injector for installation (for the other model touchsmart at least)

StarTech.com 2 Port 3 b 1 a 1394 Mini PCI Express FireWire adapter card

My question is, I am correct in my research this pci card will install on my system and if so where do the firewire install ports. It doesn't seem to be any on the body of office expansion slot (side or rear) am I missing something? or someone has one of these adapted? Thanks for all the answers in advance.

In theory, this card would allow your Touchsmart computer with Firewire ports. However, the card is really designed for a traditional desktop computer. The card would fit into the mini-map PCIe slot, and you would have to cut a hole in your case to get the ports on the outside. Also, the map seems to use a power plug style IDE to get power / extra power to your system and it does not appear to have. If you are comfortable to change and adapt your TouchSmart for such a facility, it should work.

Tags: HP Desktops

Similar Questions

  • For TouchSmart 610 FireWire card

    I am considering buying a TouchSmart 610. I have little material that uses firewire. Are there PCIe firewire cards can be installed in the TouchSmart provide a firewire port?

    No, sorry

  • TouchSmart PC 610 - 1130f turn off randomly

    I have the HP TouchSmart all-in-one PC, 610 - 1130f and you had for about 2 years.

    It's never happened before. I had a wonderful experience with my computer and I'm not going to lie. I freaked out.

    It is just off.

    I have not touched a button. The power of my house did not go out. I did not stop there. There is no automatic restart.

    He died as the power had gone off... but it didn't. Lamp and all the rest of the House worked very well.

    I tried to restart and it is on the page of windows startup, and then turns off again.

    Tried to turn on again and this time it is the pendant 5 minutes before the lights went out again.

    I went online to search for answers and someone suggested a "hard reset." So, I did what this person is doing.

    He walks again and was conducting for about 15 minutes.

    Then went out again. I went to the HP support forums. And found the following:

    http://h30434.www3.HP.com/T5/TouchSmart-PC/TouchSmart-610-1115uk-randomly-shuts-off-without-warning/...

    I suppose that, because my situation is similar to that person, that the problem is the AC Power Supply adapter charger and I should just replace.

    However, it became MORE difficult to find product.

    My questions:

    (1) am I right that the problem is the AC Power Supply adapter charger? What should I replace it?

    (2) where Devil find a? I looked on the internet and found a fragmentary site.

    Help? I mean, I love HP. Yes. Throw me a BONE here.

    Hello.
    Yes, I was looking for just confirmed that food was the problem, then I wouldn't waste money buying a part that could not possibly be the problem. Fortunately, I think it was the problem and just need to be replaced.

    Thanks for your time anyway.

    I'll share my questions here, just in case someone else comes on this post and wants a definitive answer, as I did...

    My problem
    My computer randomly shuts down as if the power was out. I didn't stop on purpose, press a button, put it to sleep or whether he was performing the updates and needed to restart... it simply, turn off the power.  He stops a lot as the failure in a House, but all of my lights and other electronic devices in my room were. It was just my computer that stop.

    I followed a lot of advice in the forums, and he did turn over a few times, but only for a few minutes before the power off and never come back.

    I was afraid this would be the motherboard, but a friend told me it could be the power supply (the brick) and I saw THIS post and thought... There should be one... or at least I HOPED it is that... or I switch to Mac.

    Never heard a response to my response to the related post, and I don't see not followed the guy in the post linked if it had worked for him.

    The Solution
    I decided to go ahead and buy the piece of power supply for my computer which is the series of all-in-one HP TouchSmart 610-1130f. It was to be a 150W (hard to find but it is sold in the HP parts store).

    It's the party info: 609919-001 in stock Powersupply - Madeline-R 150W 19V EPS2.0 Shasta

    Upon receipt of the part and plug it into my computer, it worked. It was there (currently using the computer fixed) 9 hours and it works very well. I'm STILL holding my breath and hoping that it does not turn off again. If so, I'll come back to the forum and let everyone know.

    I hope that I won't be back again in 2 years for the purchase of a new part. Lucky it wasn't something worse as the motherboard... have a computer which only lasts 2 years?

    anyway. Thought you should know a random person reading this. Good luck.

  • The monitor program basis for hp touchsmart 610-1250 temp

    Hello

    Re: HP TouchSmart 610-1250, 64 bit, Win 7.

    This is a new computer, my first all-in-one, and I want to follow the base temperature. My gadget CPU tells me that there is no core temp system. Is it possible to download a monitor?

    As an all in one, I am concerned by the accumulation of heat, since I use it every day.

    Any info is appreciated.

    Thank you

    A

    Have you tried SIW? (System Information for Windows by Gabriel Topala) I highly recommend it. Go to the page of sensors once you open it, and then it should tell you.

  • Driver HP Bluetooth Module compatible with Windows 2012 r2 for HP Touchsmart 610-1050y computer.

    Need compatible HP Bluetooth Module Driver with Windows 2012 r2 running on a HP Touchsmart 610-1050y computer.

    My HARD drive crashed a week go, bought a new and so far everything is good except for the wireless. I take classes of r2 Microsoft 2012 410, 411, 412, that's why I loaded 2012 r2 on this machine, but I can't find a driver that would allow the HP Bluetooth Module using r2 Windows Server 2012 &. HP looking for this driver, but not available, also found other sites that claim to have the drivers I need like a driveragent.com, but I pay 30 dollars for their services. Any help or suggestions are greatly appreciated and welcome.

    This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
    *
  • How do you send netflix through my touchsmart 610-1280qd to my TV

    I can't understand how to stream netflix to my TV on my Touchsmart 610-1280qd.  I have no problem streaming from my Envy laptop but it is very hot (even with an external fan) and noise requires speakers.  I had a second monitor attached to the 610-1280qd, but he said to duplicate postings.  It does not work.  Disconnected secondary monitor completely - that didn't work.  I also had a failure of installing Chromecast on the 610. Is it possible to stream with a touch screen to a TV?

    Hooray, solved.  I had already set up a second monitor (using the hp video referenced in several responses) with a StarTech USB to DVI video adapter for the second monitor 2310 m older HP.  When I went to pick him up for the 'video USB connector"referenced elsewhere in the forum, I came across a dollar 20.00 adapter DVI to HDMI by GE (Walmart).

    By connecting this piece to the USB adapter to DVI video, it worked for access to television.  I have to unplug the adaptor DVI monitor cable and replace it with the DVI-HDMI adapter and HDMI cable (less than a minute), which allows me to watch netflix on my TV movies.  I will say that I would not have thought it with the forum, the news of cat info and visually see the possibility that the small DVI to HDMI adapter would work. Good luck to those who always try to watch television through their touchscreen.

    It seems to me that when there are 1100 more we try to see how to do this that HP would create a specific page or a video for us help to know how to "connect your touch screen to your TV.  I spent 3-4 hours trying to find information to solve a problem that shouldn't exist in the first instance. I don't understand why there is no video output on touch screens.

  • TouchSmart 610-1130jp: TouchSmart does not (white screen)

    My TouchSmart 610 will be 8fois beeps after I pressed the power button. And it doesn't show anything, as in the black screen.

    But the power is still and the fan is functunally normal.and all other materials are also functionally normal.

    I tried to remove the graphics card, but its still the same beeps (8fois together with the ledlight). And also I tried to

    change the CPU at a new you always change anything, the same problem. When I check the FRIEND bios beep codes, the

    8beeps, this means that the video memory. I don't know what video memory, it is indicated (if grphics card or the)

    main video memory) if it meant the main video memory, how can I change the video memory if she tied with

    the motherboard? What will I do with this problem? Can you please if someone has encountered this problem

    shared for me to know how to solve?

    Hello David Edward,.

    Your system originally came with Windows 7?

    Have you tried reseating the RAM stick? Sometimes, that's all it takes.

    I got a stick go bad causing a system to have the exact symptoms you describe.

    The system will use the built-in memory RAM. If the RAM is bad, it can cause the effect of black screen.

    You can also run a diagnostic memory via the bios here test...

    HP Notebook PC - detection of hardware failures (Windows 7, Vista)

    You can also run a memtest from a USB or DVD.

    MemTest86 - Official Site of the x 86 memory test tool

    Ideal would be to have another stick of ram to replace with to test.

  • HP TouchSmart 610 BIOS, all elements are gray and inaccessible?

    Hello

    HP TouchSmart 610-1010sc

    BIOS HP version 6.09 (FRIEND BIOS 2.6 x)

    I am able to get into the BIOS with F10, but every time he asks: ' "user CURRENT password:".

    When I type the password (empty) computer gives 2 long beeps and it enters BIOS.

    But the PROBLEM is that all the elements are disabled...

    Which means that all the items are grayed. If I look at the instructions of the BIOS (HP bios for motherboard F01 settings) there are many editable parameters (BLUE) as boot disks, lan onboar elements, load default configuration etc.

    But in my computer, everything is visible, but GRAY and inaccessible. I can't access or modify anything even not "Load setup defaults". Only active items are "Exit ignorant changes" and "Exit save changes."

    What's not here?

    How can I access BIOS so that I can change the settings normally?

    Finally the BIOS and boot LOGO obtained works!

    I noticed that, after CMOS, reset all the product data in the SYSTEM IDs inside the HP BIOS section me wiped out.

    So I had to enter my BIOS by CTRL + F10 instead of normal F10, so that the ID SYSTEM fields are editable.

    Then just re-typed all the information of two stickers found the back of the computer.

    First content SERIES only and PART SKU No.. Second was BUILD ID, BYTES and NAME OF THE PRODUCT FUNCTIONALITY.

    NOTICE! Note that you can type BYTES of FUNCTIONALITY that once, when recording it will be grayed out out/no editable.

    After saving these changes to the BIOS and restart the computer, the LOGO is the settings the computer BIOS and fully accessible back once more

  • HP TouchSmart 610-1190f: replace the TV Tuner card AVerMedia HP TouchSmart 610 with SSD PCI-E

    I do not use the TV Tuner card for my HP TouchSmart 610.

    Can I replace the card with a PCI-E SSD?

    Hi @hpts610user,

    These all-in-one computers are not designed to be changed. I'll try not because of space and design.

    Here is a document of things which can be updated LEVEL AND SERVICE of GUIDE. .

    Perhaps looking to put a hard drive hybrid to replace the old hard drive.

    I hope this helps. Please keep me informed of the progress of things.

    Please let me know if that solves the problem by marking this post as "accept as a Solution. To simply say thank you, click the Thumbs up below!

    Thank you.

  • TouchSmart 610 1130 i5 23 "Can someone please let me have further details on what this office has?

    Hello

    This is my first post. I am interested in buying a Touchsmart 610 1130 i5 23 "Can someone please let me have further details on what this office has as the details on the specifications do not tell me anything. I would like to know things like: if it has built-in webcam, speaker, HMDI? the usb ports how etc. etc.etc.

    Concerning

    sjbis11

    Hello sjbis11,

    Is the TouchSmart 610 you are looking at a model 1130uk. If so, here is a link to a plug detailed for this model.

    http://support.HP.com/us-en/document/c02883538

  • TouchSmart 610 touched by flies. It can be adjusted?

    My friend has problems with its touchsmart 610 and flies.  They are very attracted to the screen and move the cursor when it is running.  The touchsmart may be turned off the coast or adjust to be less sensitive?  I have searched for answers and you can find videos of youtube showing others having the same problem.  Thank you for your help.

    Check out this post on the HP Touchsmart forum: http://h30434.www3.hp.com/t5/TouchSmart-PC/Temporarily-disabling-touchscreen/m-p/665873#M7229

  • TouchSmart 610-1120: Touchsmart 610-1120 and touch screen with Windows 10

    Upgrade to win 10 without any problem, I found that this touch screen is no longer available. It seems that there is not a suitable driver for the manipulation of the touch screen, under Win 10 is this corret? Or why it doesn't work on my computer?

    Thank you

    Hello @eferrari,

    Thank you for being an active member of the HP's Support Forums.  I understand that since the upgrade to Windows 10 that your computer desktop TouchSmart 610 - 1120une no longer has the TouchSmart feature.   I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When solve us the problem, I would mark you kindly post as accept as Solution so that others have the same or similar problem can find what worked for you.

    I checked the drivers for your desktop computer, and there is currently no Windows 10 driver. I recommend that you please begin by examining Microsoft Windows 10 Configuration required to verify that it will support Windows 10. He never did hard time for use as a check. Another good reference is the document of desktop HP - upgrade to Windows 10 . There the measures to take before and after the upgrade.   The document of HP products - Solutions for Windows 10 has also some suggestions for where to find Windows 10 drivers and software for your model.

    You can also use the link "Troubleshooting Windows Update tool" from the following link. You can 'open' or 'Save' the resolution of problems. She will be working to win 10, regardless of Windows 7 is in the URL. http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter. Once launched it please use the second "Background Intelligent Transfer Service" option, this should lead to an update of the "Windows updates" cannot automatically applied.

    Please return and view the results of your troubleshooting.

  • HP Touchsmart 610-1180qd - update graphics card?

    It's customizable PC I: TouchSmart 610-1180qd

    Hello! I'm not a noob when it comes to computers, in fact: I am an expert technician. I know this question has been asked a million times, but I could not find a current thread for my model. I've never worked with before all-in-one desktop computer. I know that they are more closely related to laptops rather than desktops and that they will use mobile graphics because of this cards. I love this new PC, it has everything the most of what HP has to offer me for this model, except the graphics card. At the point where they did not offer me a good Nvidia 2 GB graphics card so I went with the 2 GB ATI Radeon HD 5570, who was the best at the time, and I'm not a fan of Radeon. I look at the list of maps they offer now, and they are all much better that what I initially offered me a month earlier, when I was building my PC. My card is still not listed as an option more! I'm a little upset. My current card is down the performance of my computer. Everything else is the killer. I experience lag on some games that shouldn't be known with high graphics settings! This thing has a processor 3,4 GHz with the addition of power up to 3.8 GHz and 16 GB of DDR3 RAM! No reason for any kind of lag, it... This is the graphic card... He is lame, I didn't in my PC at all, but I had to.

    Currently, the best maps that they offer right now for my PC model starting from 09/06/2011 is:

    2 GB NVIDIA GeForce GT 425M

    2 GB, Radeon HD 6550 has

    I prefer Nvidia card much more because I want to play Final Fantasy 14 online. They are specific to the Nvidia cards only. In addition, I always preferred Nvidia at the expense of others and am not loving this Radeon HD 5570 much or not at all.

    My question is: can I order a cards online that is currently listed for the configuration of my computer and then just install it on mine? The site says nothing about the integrated graphics card, so there should be a chance, I can update. This is the same exact computer, but they seem to change the list of graphics cards every few weeks. I don't know how to go on the opening of this computer to check. Any help would be appreciated. I love this computer to death but this lame Radeon graphics card is lower to paralyze it's game performace. I should be able to play all the latest games on the high graphics with little or no problems. This PC is a beast in all, buuuuut... I hate this graphics card which is currently in so much! I paid around $2 k for this PC AIO, and his graphic part is killing me for the high end games.

    Or... What other graphics cards that I would be able to put in it? Those registered are not really as high engine.

    Thank you!

    You'd be better off looking at all the previous discussions on this topic, is not easy to replace cards because they are portable format MXM cards and the HP BIOS is picky about which cards and GPU BIOS revisions he loves.

    In general, the notice was not worth the time, energy, cost and frustration to replace.

  • TouchSmart 610-1280qd crashes

    TouchSmart 610-1280qd; Windows 7 Pro; PC x 64; Intel Core i7-2600cpu@340GHz; connected to the second monitor (HP2711x) via a video adapter - Startech.com (provided by HP):

    Crashes (buzz then blue screen) when I play movies, videos.

    All solutions?

    Hi Casiebert,

    Thank you for visiting the Forums HP's Support and welcome. I read your thread on your HP Touchsmart 610-1280qd and get a buzz then a blue screen on your HP 2711 x 27-inch diagonal LED display. What happens if you unplug the external monitor and run the same video or a movie?

    Please let me know.

    Thank you.

  • Just bought HP Touchsmart 610-1151f. Can I order recovery disks?

    Hello

    I just bought a HP Touchsmart 610-1151f used. The seller has removed the hard drive, so I have another one ready to put in.

    I've been more ore less you wonder if I'm allowed to order replacement recovery disks and install it on the hard disk, I put into the system? I am familiar with licensing how to work with HP. If that's not allowed, I could install some programs included once I got my license? I'm only really afraid with the Touchsmart and HP Beats software.

    In addition, according to the serial number, the warranty is still active. Coverage continues after the original owner?

    Thanks for your help! I'm excited to try this thing!

    IIf you order it site Web HP, then you worry about licensing. An operating system OEM that does not require license keys to register. This is a Windows version of pre-rigestered on all HP computers.

Maybe you are looking for