TouchSmart 610-1280qd crashes

Similar Questions

• How do you send netflix through my touchsmart 610-1280qd to my TV

  I can't understand how to stream netflix to my TV on my Touchsmart 610-1280qd.  I have no problem streaming from my Envy laptop but it is very hot (even with an external fan) and noise requires speakers.  I had a second monitor attached to the 610-1280qd, but he said to duplicate postings.  It does not work.  Disconnected secondary monitor completely - that didn't work.  I also had a failure of installing Chromecast on the 610. Is it possible to stream with a touch screen to a TV?

  Hooray, solved.  I had already set up a second monitor (using the hp video referenced in several responses) with a StarTech USB to DVI video adapter for the second monitor 2310 m older HP.  When I went to pick him up for the 'video USB connector"referenced elsewhere in the forum, I came across a dollar 20.00 adapter DVI to HDMI by GE (Walmart).

  By connecting this piece to the USB adapter to DVI video, it worked for access to television.  I have to unplug the adaptor DVI monitor cable and replace it with the DVI-HDMI adapter and HDMI cable (less than a minute), which allows me to watch netflix on my TV movies.  I will say that I would not have thought it with the forum, the news of cat info and visually see the possibility that the small DVI to HDMI adapter would work. Good luck to those who always try to watch television through their touchscreen.

  It seems to me that when there are 1100 more we try to see how to do this that HP would create a specific page or a video for us help to know how to "connect your touch screen to your TV.  I spent 3-4 hours trying to find information to solve a problem that shouldn't exist in the first instance. I don't understand why there is no video output on touch screens.

• TouchSmart all in a 610-1280: removal of the receiver for keyboard touchsmart 610-1280qd

  I have the HP all in one computer. I saw the answer to the desire dongle and as I watched the video. I discovered that the receiver because the keyboard is built and I can't find how to remove it at the back. The video that was released is another computer. My keyboard works more completely, and the only thing I can do is to use the on-screen keyboard to copy my photos. Even the on-screen keyboard doesn't let me sign to be online. The mouse works fine. I need to remove the receiver so I can try another keyboard. I tried a wired keyboard and it did not work. I have troubleshooted the keyboard and said it can find no problem. I need to connect to get MS to fix my computer. I have them already paid annually 150

  dollars for a years support, but they cannot help unless I can leave it by remote control. Thanks for any help. When they were able to get before the keyboard is out, they said that IE crashed the entire system, a problem of MS and they would reinstall windows 7.

  I'm so frustrated that I don't know what to do. I can't really afford to pay someone else again. Any suggestions would be helpful.

  Hello

  Keyboard and mouse use SAME receiver and the mouse is still ok, that means that nothing wrong with the receiver. Have check you its batteries? You can borrow a normal keyboard to USB from a friend? You can start your computer and the support that people look at your machine. Please check the batteries first.

  I don't think that the receiver is integrated.

  Kind regards.

• HP TOUCHSMART 610 1280qd COMPUTER cannot FIND the DISC START? HELP SOMEONE?

  Computer was working fine... I stopped him and he wanted to go to the top...  In the past when turning on pc, he would go to the same screen here and there... I turn off and turn it back on and it should start right... At the time where I don't think whatever it is the other number then I pushed the power button the rapids...  GUESS I WAS WRONG...  Help, please...  THANKS RICHARD

  Rocker, welcome to the forum.

  This error message can mean that the hard drive has failed.  Here is a guide to help you solve the problem.  I hope that you have a backup of your personal data.

  Please click on "BRAVO", if I helped you and click on "Accept as Solution" If your problem is resolved.

• TouchSmart 610-1280qd

  Will there be room inside this computer to install a 2.5 SSHD?  The motherboard has an additional SATA port?

  The short answer is no.

  Card mother specifications WJ1 (Inglewood);
  Internal connectors;
  2 x SATA 2.0 connectors
  1 x SATA (HDD)-power header
  1 x SATA (ODD) power header/combination

  There is no additional SATA or power connector for a third album. There is no room for a third drive, either.

• TouchSmart 610: PC off completely unexpected

  Hi all

  I hope you can help, I spent hours scouring the forums to find answers. I have a friends computer I tried to fix, are rarely a problem that I can't, but this one left me speechless.

  From what I can tell, it was a common fault with the power brick and the system completely shut down for what seems like no reason. So I replaced the power brick, still the same issue.

  I checked the ram, I used memtest 86... the computer crashed almost instantly so perhaps I thought that the ram was also an issue. I replaced the ram with ram I know works, but it is still completely off.

  I did a full scan of the hard drive and can't find bad sectors or errors.

  the problem first started happening with win7 home (what it came with), I replaced it with win7 Ultimate (new installation). so it is definitely not the operating system.

  It drives me completely crazy, it seems there is no other thread I can find where the problem got to this level with this model.

  Help, please.

  Thank you.

  Hello

  Please come back to me, I wanted to test my theory a few days before I posted. I eventually found the problem it seems that nobody else has. With the HP touchsmart 610, it appears with the power brick and the common memory issues it seems to be another HUGE problem I suspect will be a normal thing in the factory. I tried as you know and he had baffled me but I was convinced that it should be a matter of hearing.

  I found the solution... At least that worked for me. It turns out that it was not any thermal past between the cpu and the heatsink... NO WHAT SO EVER. I put on a past thermal and two days non stop with on a stop down. So the problem is solved. Thank you for your help.

• Driver HP Bluetooth Module compatible with Windows 2012 r2 for HP Touchsmart 610-1050y computer.

  Need compatible HP Bluetooth Module Driver with Windows 2012 r2 running on a HP Touchsmart 610-1050y computer.

  My HARD drive crashed a week go, bought a new and so far everything is good except for the wireless. I take classes of r2 Microsoft 2012 410, 411, 412, that's why I loaded 2012 r2 on this machine, but I can't find a driver that would allow the HP Bluetooth Module using r2 Windows Server 2012 &. HP looking for this driver, but not available, also found other sites that claim to have the drivers I need like a driveragent.com, but I pay 30 dollars for their services. Any help or suggestions are greatly appreciated and welcome.

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)

  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• TouchSmart 610-1130jp: TouchSmart does not (white screen)

  My TouchSmart 610 will be 8fois beeps after I pressed the power button. And it doesn't show anything, as in the black screen.

  But the power is still and the fan is functunally normal.and all other materials are also functionally normal.

  I tried to remove the graphics card, but its still the same beeps (8fois together with the ledlight). And also I tried to

  change the CPU at a new you always change anything, the same problem. When I check the FRIEND bios beep codes, the

  8beeps, this means that the video memory. I don't know what video memory, it is indicated (if grphics card or the)

  main video memory) if it meant the main video memory, how can I change the video memory if she tied with

  the motherboard? What will I do with this problem? Can you please if someone has encountered this problem

  shared for me to know how to solve?

  Hello David Edward,.

  Your system originally came with Windows 7?

  Have you tried reseating the RAM stick? Sometimes, that's all it takes.

  I got a stick go bad causing a system to have the exact symptoms you describe.

  The system will use the built-in memory RAM. If the RAM is bad, it can cause the effect of black screen.

  You can also run a diagnostic memory via the bios here test...

  HP Notebook PC - detection of hardware failures (Windows 7, Vista)

  You can also run a memtest from a USB or DVD.

  MemTest86 - Official Site of the x 86 memory test tool

  Ideal would be to have another stick of ram to replace with to test.

• HP TouchSmart 610 BIOS, all elements are gray and inaccessible?

  Hello

  HP TouchSmart 610-1010sc

  BIOS HP version 6.09 (FRIEND BIOS 2.6 x)

  I am able to get into the BIOS with F10, but every time he asks: ' "user CURRENT password:".

  When I type the password (empty) computer gives 2 long beeps and it enters BIOS.

  But the PROBLEM is that all the elements are disabled...

  Which means that all the items are grayed. If I look at the instructions of the BIOS (HP bios for motherboard F01 settings) there are many editable parameters (BLUE) as boot disks, lan onboar elements, load default configuration etc.

  But in my computer, everything is visible, but GRAY and inaccessible. I can't access or modify anything even not "Load setup defaults". Only active items are "Exit ignorant changes" and "Exit save changes."

  What's not here?

  How can I access BIOS so that I can change the settings normally?

  Finally the BIOS and boot LOGO obtained works!

  I noticed that, after CMOS, reset all the product data in the SYSTEM IDs inside the HP BIOS section me wiped out.

  So I had to enter my BIOS by CTRL + F10 instead of normal F10, so that the ID SYSTEM fields are editable.

  Then just re-typed all the information of two stickers found the back of the computer.

  First content SERIES only and PART SKU No.. Second was BUILD ID, BYTES and NAME OF THE PRODUCT FUNCTIONALITY.

  NOTICE! Note that you can type BYTES of FUNCTIONALITY that once, when recording it will be grayed out out/no editable.

  After saving these changes to the BIOS and restart the computer, the LOGO is the settings the computer BIOS and fully accessible back once more

• HP TouchSmart 610-1190f: replace the TV Tuner card AVerMedia HP TouchSmart 610 with SSD PCI-E

  I do not use the TV Tuner card for my HP TouchSmart 610.

  Can I replace the card with a PCI-E SSD?

  Hi @hpts610user,

  These all-in-one computers are not designed to be changed. I'll try not because of space and design.

  Here is a document of things which can be updated LEVEL AND SERVICE of GUIDE. .

  Perhaps looking to put a hard drive hybrid to replace the old hard drive.

  I hope this helps. Please keep me informed of the progress of things.

  Please let me know if that solves the problem by marking this post as "accept as a Solution. To simply say thank you, click the Thumbs up below!

  Thank you.

• TouchSmart 610 1130 i5 23 "Can someone please let me have further details on what this office has?

  Hello

  This is my first post. I am interested in buying a Touchsmart 610 1130 i5 23 "Can someone please let me have further details on what this office has as the details on the specifications do not tell me anything. I would like to know things like: if it has built-in webcam, speaker, HMDI? the usb ports how etc. etc.etc.

  Concerning

  sjbis11

  Hello sjbis11,

  Is the TouchSmart 610 you are looking at a model 1130uk. If so, here is a link to a plug detailed for this model.

  http://support.HP.com/us-en/document/c02883538

• HP recovery Partition lost "Hp Touchsmart 610-1100fr"

  I lost partition ecovery can I do to restore it?

  I tried to reinstall my computer with HP recovery to file factory, but an error is 1% and the recovery partition is lost so I want back what can I do now, I would if I could get it back with the help

  When I bought my HP touchsmart 610-1100fr so I did a back up of the recovery with 'Nero Backitup' partition

  but whenever I have to restore the partition, that seems not function all I get is a black screen, then he told me BOOTMNGR is missing and the F11 key no longer works

  * PS: I live in Tunisia and I can't order the recovery DVD

  Hello

  If you place your order of recovery disks is not possible, here's another solution, you can try.

  Before you try the following, make sure that you can always read the character product activation key 25 on your label Windows COA (5 blocks of 5 alphanumeric games).

  An example of a COA label can be seen here.

  You can create a Windows 7 installation disc yourself using another PC - just download the good Disk Image ( must be the same version originally supplied with your PC - IE probably Windows 7 Home Premium 64-bit ) from the link below and use an app like ImgBurn to burn the ISO correctly on a blank DVD - a guide on the use of ImgBurn to write an ISO on a disc is here.  These Images are clean and a well respected source, however there are only limited versions available.

  Windows 7 sp1-iso-official-32-bit-and-64-bit

  Use the disk to perform the installation, enter the activation key of Windows on the label of the COA at the request and once the installation is complete, use ' 'phone Method' described in detail in the link below to activate the operating system -this made method supported by Microsoft and is popular with people who want to just have a new installation of Windows 7 without additional software load normally comes with OEM installations.

  http://www.kodyaz.com/articles/how-to-activate-Windows-7-by-phone.aspx

  All pilots additional and the software, you may need can be found here.

  Kind regards

  DP - K

• TouchSmart 610 touched by flies. It can be adjusted?

  My friend has problems with its touchsmart 610 and flies.  They are very attracted to the screen and move the cursor when it is running.  The touchsmart may be turned off the coast or adjust to be less sensitive?  I have searched for answers and you can find videos of youtube showing others having the same problem.  Thank you for your help.

  Check out this post on the HP Touchsmart forum: http://h30434.www3.hp.com/t5/TouchSmart-PC/Temporarily-disabling-touchscreen/m-p/665873#M7229

• TouchSmart 610-1120: Touchsmart 610-1120 and touch screen with Windows 10

  Upgrade to win 10 without any problem, I found that this touch screen is no longer available. It seems that there is not a suitable driver for the manipulation of the touch screen, under Win 10 is this corret? Or why it doesn't work on my computer?

  Thank you

  Hello @eferrari,

  Thank you for being an active member of the HP's Support Forums.  I understand that since the upgrade to Windows 10 that your computer desktop TouchSmart 610 - 1120une no longer has the TouchSmart feature.   I am convinced that I will be able to help you find a solution, and I ask only that pay you it forward. When solve us the problem, I would mark you kindly post as accept as Solution so that others have the same or similar problem can find what worked for you.

  I checked the drivers for your desktop computer, and there is currently no Windows 10 driver. I recommend that you please begin by examining Microsoft Windows 10 Configuration required to verify that it will support Windows 10. He never did hard time for use as a check. Another good reference is the document of desktop HP - upgrade to Windows 10 . There the measures to take before and after the upgrade.   The document of HP products - Solutions for Windows 10 has also some suggestions for where to find Windows 10 drivers and software for your model.

  You can also use the link "Troubleshooting Windows Update tool" from the following link. You can 'open' or 'Save' the resolution of problems. She will be working to win 10, regardless of Windows 7 is in the URL. http://windows.microsoft.com/en-US/windows7/Open-the-Windows-Update-troubleshooter. Once launched it please use the second "Background Intelligent Transfer Service" option, this should lead to an update of the "Windows updates" cannot automatically applied.

  Please return and view the results of your troubleshooting.

• problem when using the touchsmart 610 system recovery

  Hello..
  I have HP Touchsmart 610, I wanted to use a system recovery, but there was a problem with the system recovery, so I press F11 to run the system recovery, but he wasn't working, he was white with a massage "windows is not started, a recent hardware or software changes just to be originally, to solve the problem. :
  1. Enter your windows installation disc
  2.
  3.

  file: \boot\CD

  status: 0xc888888f
  "info: an error occurred trying to read the boot configuration data.
  
  What must I do to solve this problem at least to save to condition before I preconfigure F11?
  
  Thank you before

  Hello bayccot,
  
  What's the screen that comes on the computer when you turn it on now? You may need to use CDs to recover the operating system if it will not progress past that screen and the recovery of F11 does not work.