Firmware for cameras H20

Similar Questions

• I need the firmware for a chicony cam on Satellite A300-14 s

  I had a lot of problems with my chicony cam on A300 Dungeon of freezing and to stop working so I think that update the firmware, so I search on the net for new firmware and I found one and install it... now my cam isn't working windows can see and it gives the device works but when I try to open Toshiba help cam its says the cam does not work and when I try to open it in PROG like yahoo, nothing happens.
  It s not even power up... so please I need the firmware original please please please...

  Sorry for my bad English :)

  Firmware for cam doesn t exist. What you can do is to install the driver for the webcam.
  What operating system you are using and what firmware you have installed finally?

• Ring of the remote control for a updated firmware A77 camera REQUIRED emphasis comments functionality and design?

  Hello
  It is a good complaint and at the same time a good stand on a feature I'd neeeeeed really put in an update of firmware for the camera of the A77 as soon as POSSIBLE (as soon as Possible) like others, I have already asked for what he moooooonths there!
  I have spent the money of the month and time in a machine to control the update in order to focus stacking without touching the camera... It does not give the expected results, but maybe after all, I will succeed.

  But of course, it would look pretty cheap technology around an expensive Sony which does not any Thetering for this device 3 times the price other cameras with this feature, "Thetering", a term which means remote control the camera from a computer or IPod, mobile phone, etc.

  FUNCTIONALITY NECESSARY:

  Everything is necessary at least to do something, would be the ability to reallocate the shutter half pressed the button to advance a specific step. When the focus is narrow, few measures are necessary, but it goes further, steps may be greater. The camera would limit its course to the limits of the focus ring. Once the button out (so not half or completely down) or when the update has reached the limit of development more far, it would be to take a last picture and bring focus back to its position closest to you, ready for the next batch of photo.

  Pictures would be taken when completely down. If the focus is not the position of the closet before splashed the process, we could do it manually or select an option from the menu.

  Another possibility would be to reassing these 2 keys of the remote control features: a to make one step back, one to make a step forward. The advantage of the 2nd button that allows a remote control, would be the possibility of backwards if we went off for a step.

  Overall, it would take very little programming to do this. (mainly add a menu option and the operation of each time button x is pressed, focus moves a step forward, a step being of size proportional to the distance according to a simple formula. Same thing for a button Y in the opposite direction.

  (1) what is the best way to communicate this request to the right people?

  If someone expect this feature too, please comment!

  (2) also, where we communicate comments on design issues?

  Thank you

  Hello Mark,

  Welcome to the community forums of Sony

  Thank you for your comments and feedback for the SLT - A77.  The answer to both questions is, Right Here.

  We are able to pass all your firmware requests and comments and suggestions regarding the product directly to the Digital Imaging Group.

  We can't promise or provide an ETA, however, we listen and as owners of the NEX-7 can attest, we can impliment when we can.

• Firmware for the Alpha A65

  What is the latest firmware for the A65 Alpha as of February 17, 2013

  From this date, Version 1.07 is the last update of the firmware for the camera I AM-A65V. It can be downloaded from the Sony eSupport at http://esupport.sony.com/LA/p/model-home.pl?mdl=SLTA65Vsite.

  If my post answered your question, please mark it as an "accepted Solution". This will allow users to more quickly find verified solutions.

• Re: Satellite Pro A300D - firmware for the DVD player?

  Hello

  I recently got a nice new Satellite Pro A300D of my work and was just my typical thing to go through the update of their efforts. However, when you try to update the firmware of the DVD drive for my particular model (PSAK9E-00C003EN), I realized that the firmware he suggested was wrong. After watching on my pc, I discovered that my drive is Pioneer DVD - RW DVRTD08A (1.50), but I can't find information anywhere on the net about the updates of the firmware (or the existence of this drive at all!). Could someone point me in the direction of some information and firmware more recent if it exists?

  Thanks for any info that someone has!

  Willybob

  Satellite Pro A300D was equipped of various CD/DVD players.
  On the Toshiba driver page, you can find an update of the firmware that came out for a CD/DVD drive that was not installed in your laptop and so you can not install this update.

  If you are unable to find an update of the firmware of your CD/DVD drive, then an update doesn't exist and is not necessary!

• Update firmware for HX100V?

  Request for update of firmware for HX100V to include photography in fast motion in the film section. Now I can record in 30ps (MPEG4) or 60ps (AVCHD). It should be possible to allow flexible adjustment for slower frame per second to produce the same photograph of time-lapse effects. No necessary intervalometer. My cheapie GE X 5 camera have intervalometer setting for interval of 30 s, 1 min, 5 min & 10 min. Kind of sad to see that you missed this feature in a perfect unit for photography accelerated. Get there in the guy.

  Thank you for your post and welcome to the forum.

  I forwarded your suggestion to the applicable to review Sony team in a future update.

• Latest version of the Firmware for a-300 Alpha?

  What is the latest version of Firmware for a-300 Alpha? My camera shows ver 1.00 Sony issued an update?

  As far as I can find, no, it was not an update (someone correct me if im wrong)

  Here is the link to download the driver of your camera

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=DSLRA300&template_id=1&Region_ID=1&tab=download#/Dow...

• Power lost during printing. Printer will not start. Need firmware for C5550.

  I lost power while printing a few days ago. The printer won't reset/reboot to the normal start screen. It displays a blue screen with an icon of power button and the message "BA00C63C". The power button does not work. I tried holding it in... does nothing. I unplugged the unit for two days to let the shock caps, but the unit still will not be reset. I would try to reflash its firmware. Where can I get the right firmware for a Photosmart C5550 all-in-one? Thank you.

  Too bad. I had the camera reset/reboot. Unplugged, waited 30 seconds and plugged back while now the 'aid' a 'power' buttons

• Y at - it updated firmware for the m3 RX100

  Sony makes updates firmware for their cameras ie; RX100 m1/2/3, like to know before you buy one. Many sites seem to believe that it is rare that their cameras updated firmware. Cheers in advance

  Hello Oriley59,

  There is no update firmware, but made for the three models RX, you talked and it is difficult to assume that an update will be released soon.

  If my post answered your question, please mark it as "accept as a Solution.

• Error message on the download of update of firmware for airport

  Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

  The error message say, exactly? What version of Mac OS X you are running on this machine?

  For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

• restore the firmware for macbook pro 13 mid 2009

  Hi all! This is my first time using the support community so forgive me for any rudeness and English summary.

  I recently bought a used mid 2009 macbook pro 13 "with no disc on this subject, I installed a new empty 120 GB ssd drive.

  I asked a friend and he has downloaded and made me a usb bootable with osx on it (lion). I instaled the osx and got the macbook running successfully and it was perfect.

  I decide to update and went up el capitan wich sucessfully installed. After the update I tried it out, web navigation simple, when suddenly, out of nowhere the mac stop (much battery left and the led indicator to confirm) and has not started since... when I turn it on the led light flashes and it gives the s.o.s. beep (3 short beeps followed by 3 long beeps and then 3 short beeps) the optical drive made his usual looking noises of boot and the fan continues to spinning, I tried to remove the battery 10 minutes several times and nothing... I read a lot about the problems of ram tested with one stick at a time in the two slots and no improvement... bought a new pair of hynix 2 gb 1066 mhz pc3-8500 ddr3 sticks as recommended for this model and replaced the "old"... did nothing.

  I have no original discs just the macbook itself and the charger. Also tried to boot from the usb drive... not good... tried to start mode revovery... nothing that the black screen and a beep sounds.

  I did some research and read a looooot online and in discussions such as this apple and found it to be the sound warning for bad/corrupted efi rom (as opposed to the majority of people declaring it to be a ram issue) which needs to be restored or flashed... However, apple does not provide or at least I can't find a picture of recovery for my model cd special I know it's the macbook 5.1 (a1278 / emc2254). Is there any solution for this? Please help in some way that you can welcome suggestions!

  Thank you

  Then, you say at the end of your post, you say that it is a MacBook, but it is a MacBook Pro. Check which model you have.

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor - https://support.apple.com/HT201518

  What to do with all these "beeps mean at the start? - http://forum.insanelymac.com/lofiversion/index.php/t62919.html

  Power on self-test beep definition - part 2 - http://support.apple.com/kb/HT1547 - old Macs

  Mac Power on Self Test RAM Intel processor error codes - http://support.apple.com/kb/HT2341

  iMac (mid 2007) and later models: on startup tones - http://support.apple.com/kb/HT2538

• I need the firmware for the Toshiba excited AT7 B618

  Hello

  The Tablet keeps showing a message

  Unfortunately, it stopped secret lock

  Ok

  When I press OK it comes again.

  I fact (power + key) factory reset, but it does not solve the problem.

  I installed antivirus it found 7 threats, but he did not remove it because it becomes the vendor applications. Viruses that are present in the backup.

  I need the firmware image to excite at7 - B? Please reply with the download link.
  
  Device name: AT7-B618
  Unit number: PDA0HV-002004AR
  Product group: TOSHIBA

  Best regards
  Department of health Shair
  
  Thank you
  

  I have the same problem, why not support a large company like toshiba product, why I can not download a firmware for AT7-B618?

  Please I need this firmware
  Best regards

• Firmware for the SSD THNSNJ128G8NU

  Hello

  I can't download the firmware for my SDS: THNSNJ128G8NU
  My laptop is a msi Ge72.
  Can you help me.

  Thank you

  I think that this firmware update is not yet available...
  Where new firmware is available, you should find it on this page:
  http://Toshiba.SEMICON-storage.com/e...t-SSD/Hg6.html

• Need firmware for Toshiba 40TL968 services

  Hi guys,.

  any chance someone could help me to provide the service (bin, mfc, mboot file) firmware for 40tl968?

  Im a little apart, and there is no repair of Toshiba close store.

  Thank you!

  What is the problem with your TV?

• New firmware for Toshiba 39L4333DG

  Hello

  I'm new here. Could you tell me please when I can exepect new firmware on th TV?
  It's almost a year since the last update at the same time all of my local vod applications stopped work correctlly.
  A vod owner told me that you do not support DRM features that cause the app does not work properly
  (local names of applications are ELPI, player, vod onet)
  Rafal

  Hello

  I had a question for one of Toshiba TV games firmware, you'll make new firmware for either of the sets of TV from Toshiba?
  Or you just stoped doing this.