Firmware for DVD - RAM Mat * a UJ - 850 s in Satellite L40 - 14F

Similar Questions

• Update of firmware for DVD - RAM Mat * a UJ - 841 S in Satellite M40-265

  Hi all

  I had a problem:

  My M40-265 Satellite integrated mast * a DVD - RAM UJ - 841S by car.
  In fact, it should be able to burn DVD - R 8 x.
  But that it burns only 2 x atm.

  I already changed the manufacturer disk 3 times.
  And the discs can be burned x 16 to 2 other PC...

  It's really annoying because I spend a lot of time, 1 single dvd burning...
  I need a Firmware update.
  But the only updated, I find, is actually for VAIO Laptops... .it does not work.
  Can you help me please?

  Thank you!

  Best regards
  Henning

  Hello

  the problem is, the carpet * a readers are a bit complicated regarding the FW update and burning speeds.

  Have you tried Verbatim and TDK? Carpet * a readers want to be fed with very expensive disks that has nothing to do with toshiba, rather (and sadly) something with the manufacturer of this drive. :(

  You can do the following:

  Try initially to these sites:

  Driver DVD-RAM for your car
  http://www.bhacorp.com/download/utilities/DVDRAM.html

  Firmwareupdate for your car
  http://Forum.RPC1.org/dl_firmware.php?download_id=2244

  But I recommend using BEST discs for burning. So I solved my problems of speed with a carpet * player.

  Welcome them

• Equium L10 needs a driver for DVD - RAM drive

  It's rather embarrassing, but these days, I found that somehow, the driver for my DVD RAM (Mat * un UJ830s) is somehow damaged or missing.

  I searched high and low on the net to find the right driver to reinstall, but I can't find a single thing.

  Do not can someone help?

  Do you mean simply common driver for the carpet * a UJ830s?
  Windows generally use the common Microsoft OS driver and usually you will not find a Toshiba driver for this device.
  OK, on the page you will find a DVD - RAM but it s only for reading and writing to DVD-RAM media.

  Attention if you use DVD-RAM disks in the drive of DVD MULTI data cannot be written to a DVD-RAM disk, while the function to write data on discs CD-R/RW standard Windows XP is enabled.
  A message is displayed when this function has been enabled, so when using a DVD-RAM disk, take into account the teaching given in this message by unchecking "enable CD writing on this drive.

• Satellite A30: Need a new firmware for DVD player

  Hello

  I'm looking to the original Firmware for my DVD-Rom, as he stopped playing DVD-R after I tried to make the region free drive. I still can't play CD and DVD original but not DVD-R

  It is said with the firmware I found on the page of toshiba FW Update Tool.exe Firmware already updated drivers.
  Is there an original Firmware for the A30 Series?

  Hello

  I guess you have tried to install application 3rd on your drive to make it region free? Am I wrong?
  Well, it seems that this software is responsible for the problem.
  I guess that this device has been delivered with the SD-R2412 reader, but I m not 100% sure.

  You can visit this page:
  eltype http://www.Toshiba-Europe.com/storage/PFT.asp?page=pft&NAV=RSC_ARC&model=SDR2412&spr_mod = COMBOSL & spr_model = SDR2412

  There you should find the update of the firmware on the right side

• Need new firmware for the drive (Mat * un UJDA750)

  I have a Satellite M30 with a carpet * a player combined UJDA750. Anyone know where I could get a new firmware for the drive?

  THX.

  Hello

  I put t know why you need a firmware for your combo drive.
  As far as I know the carpet * a combo UJDA750 driver works with the Windows driver very well.

  Good bye

• LED light for Wi - Fi on Satellite L40 - 14F does not illuminate

  Is he someone correct the problem with LED light for Wi - Fi on L40 - 14F?

  What do you think average is by any fix for the WLan light

  Are sure you that you have enabled the WLan switch on the side of the laptop?
  Only this switch controls the WLan light!

  If the WLAN led does not illuminate after that you have activated the WLan switch there is something wrong with the hardware.

  then if there is something wrong with the hardware of notebooks is needed the help of ASP.

• English need driver SATA XP for Satellite L40 - 14F

  Can someone tell me who exactly is the driver for the SATA controller for my laptop.
  I downloaded the package for windows xp drivers for my model L40 - 14F & have try to install the driver file SATA Chipset (from packaging) but still does not work, this is the package - drvpack-en - 20071119132412.zip

  What can I do? Where is the SATA driver? Please someone help me.
  Yesterday, I bought my pc and I'm still not functioning normally.

  Initially, I have no cd with drivers.
  I need to download some.

  Hello

  Don t know how you tried to install the SATA drivers, but this must be done without a doubt before, you are going to install the XP operating system.
  During the installation process you must press the F6 key to include the drivers of external USB FDD.
  I you don t have an external USB FDD drive and then use the 3rd party software called nLite to create a new XP CD and include the SATA drivers.

  Driver SATA can be found in the Intel Matrix Storage Manager which can also be downloaded from the Intel page.
  Notes; Chose the right iMSM for your chipset

  Good bye

• Need to update firmware for DVD SD 370 EKE player

  Please help with my DVD Toshiba SD 370 EKE

  Mate sorry but even if you would find new updates of the firmware, the subtitle format is fixed...

• M50-192: DVD - Ram Mat * a UJ - 841 S burn only 2 x

  Hi guys

  This perticular drive reconises only Ritek 8 x G05 media as 2 x any idea why it will burn only at 2 x using NERO and Sonic Record now.

  Been intouch with the place where the laptop was purchased from and they explained that it could be a problem of firmware with this perticular Media.

  So so I need some food to go back about what kind of 8 x speed support this writer will use.

  If it is a firmware issue, it is a problem for end users who wish to use Ritek media.

  Hello

  Well, I use the TDK and I m very happy. You should try using different media.

  Also, I read that this new driver could resolve the burning question.
  Try to install this driver:
  http://Panasonic.co.jp/PSEC/Data/mkehp/docs/Driver/XPDrv5021NEN.exe

  Maybe it helps.

  Good bye

• How can I make the DVD drive Mat * une Région UJ - 841S (Satellite M70) free?

  Hello
  I spent hours and hours trying to remove my car DVD DVD regional code Mat * a UJ - 841 S on Toshiba Satellite M70-204.
  I checked on various forums and asked a lot of people in the stores...
  Nobody gave me a hint to this topic...
  Can you please help?
  I often watch DVDs from various regions for my course!

  Hello

  The same topic a few days ago http://forums.computers.toshiba-europe.com/forums/thread.jspa?threadID=10828&messageID=38935#38935

  Check it!

• Satellite L40 - 14F: no picture but its DVD playback using WMP

  It is impossible for the DVD playback (not), but it is solid.
  WinXP SP2 - WinMediaPlayer

  If you want to play a DVD with Windows Media Player you will need a special codex.
  I advise to use a software like Power DVD or WinDVD to play DVD...

• Where can I find all the drivers Win 7 for Satellite L40 - 14F

  Hi all
  Find all the drivers for L40 laptop model 14F for windows 7 OS? Is that someone has installed this OS? Is it possible to have some problems during installation? Thank you very much.

  Most of the new models is Win8 or Win10 models, they won't get Win7 drivers available.

• SD-R6372 player recognized as Mat * un UJ830S DVD-RAM

  Hello

  (Sorry, but I'm not very good in English)

  I have a TOSHIBA SD - R6372 DVDRAM in my laptop, but windows (XP) recognizes him as a CARPET * has DVD-RAM UJ830S. So I can't write DVD-R and DVD + RW. And when I wan't updtae firmware with SDR6372 - 1732.exe there returns the following error: "the target drive is not found.
  I guess is a driver's fault, but I can't find the driver anywhere.

  Please help me.
  Thanks :)

  Hello

  As far as I know, there is no special driver for any player and it will be used standard Microsoft driver. Player must be installed only for DVD-RAM DVD tool. Understand your problem a bit better it will be useful to know what model of laptop you have.

• Tecra A8 - Mat * a DVD - RAM UJ-problem reading 841S

  I have Tecra A8-143 (PTA843E) Lap, WXP Pro SP2 original. Later, I installed SP3 and the problem with the topic. Finally the time Mat * one impossible reed VERBATIM DVD - R (4, 7 GB) discs, even those who got burned in 'home' with Nero (or record now, I'm not sure), although reed he earlier without problems.

  In addition, the reader can Reed DVD-R and Memorex CD - R Verbatim discs. In the meantime I have installed and uninstalled several programs and we hope that the point is in the configuration, but I afraid that SP3 is "fatal error" and I cannot flee from resettlement.

  It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers? My experience is humble and I'll be very grateful for help.

  Thanks in advance.

  > It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers?
  As noted in the previous announcement the CD/DVD drive is still controlled by Microsoft Windows driver!
  There is no other pilot who could control the STRANGE

  Back to your question;
  There are two reasons why your CD/DVD drive does not read the disc;
  First the disc would be insufficiently supported or the s drive laser lens cannot handle the disc to the stress matrix laser lens could also not be clean
  You could clean the lens with a cotton tip and alcohol
  In my case it helped

• CD/DVD-ROM for reading CD / DVD RAM only...

  I reinstalled Windows XP due to problems with my system works only with Win7.  I did a clean install.  Windows XP installed a generic driver from microsoft CD/DVD RAM.  For this reason, I am not able to access the DVD ROM discs, no discs as CD ROM and DVD RAM disks.  I know that there is a way to change things so the system sees that I have a DVD ROM and not only a DVD RAM.  It's just think WinXP that my readers are only DVD RAM drives work very well.  They work perfectly with CD and CDR/RW and will work with a store bought DVD.  I just can't figure how to change the generic Microsoft for DVD RAM DVD ROM driver  I had this problem before, I don't remember the fix. I deleted the registry entries, I deleted the readers, only for have reinstalled them with the original drivers.  I have 2 drives, both are LiteOn.  LiteOn has no drivers for the drive and says they are "plug and play".  Any help would be greatly appreciated.  Thank you.

  I tried this also.  He said: there is nothing wrong with my CDROM or it says that my CDROM is not able to write DVD and install one that can.  Thank you.

  To access device manager > right click on the CD/DVD rom device and choose uninstall. Restart the computer and allow windows to detect the new hardware.