Equium L10 needs a driver for DVD - RAM drive

Similar Questions

• Update of firmware for DVD - RAM Mat * a UJ - 841 S in Satellite M40-265

  Hi all

  I had a problem:

  My M40-265 Satellite integrated mast * a DVD - RAM UJ - 841S by car.
  In fact, it should be able to burn DVD - R 8 x.
  But that it burns only 2 x atm.

  I already changed the manufacturer disk 3 times.
  And the discs can be burned x 16 to 2 other PC...

  It's really annoying because I spend a lot of time, 1 single dvd burning...
  I need a Firmware update.
  But the only updated, I find, is actually for VAIO Laptops... .it does not work.
  Can you help me please?

  Thank you!

  Best regards
  Henning

  Hello

  the problem is, the carpet * a readers are a bit complicated regarding the FW update and burning speeds.

  Have you tried Verbatim and TDK? Carpet * a readers want to be fed with very expensive disks that has nothing to do with toshiba, rather (and sadly) something with the manufacturer of this drive. :(

  You can do the following:

  Try initially to these sites:

  Driver DVD-RAM for your car
  http://www.bhacorp.com/download/utilities/DVDRAM.html

  Firmwareupdate for your car
  http://Forum.RPC1.org/dl_firmware.php?download_id=2244

  But I recommend using BEST discs for burning. So I solved my problems of speed with a carpet * player.

  Welcome them

• Equium L10 300: question of burning & DVD S-Video

  I have a 300 Equium L10. I have 2 questions.

  1: it is said that it is a MULTI recorder, but it does not burn on a DVD + RW, is this correct?

  2: when I connect to the TV via the S-video cable to play a slideshow of the laptop, the TV screen is blank.

  Help, please.

  Hello

  1. it is OK
  2. I don't know how you do this slideshow, but I assume that it can occur if you use the screen LCD and TV at the same time. Try setting the TV only.

  Good bye

• Firmware for DVD - RAM Mat * a UJ - 850 s in Satellite L40 - 14F

  Hello.

  I would like to ask who is available update of firmware for Mat * a DVD - RAM UJ-850 s located in the laptop Toshiba Satellite L40 - 14F. I can't find it on Panasonic/Matt * a web site.

  Thanks for the replies.

  Hi Dusan

  Can you please tell us what DVD are you writing about? Movie original DVD or your own creation? what application should I use to watch DVDs?

  Try VLC media player.

• Do I need to reformat my DVD-Ram, when he shows no free space and used space is all blue

  My DVD - RAM drive is just awesome to work a couple of days and now it no longer works. He mentioned this reformatting. I uninstalled and reinstall windows. but it still doesn't work. You can hear the motor running then it stops and then starts upward. Any advice?

  You reformat DVD discs not even any space.

• Equium A300D - need hard drive replacement

  Hello

  I need to replace my hard drive on the laptop above as he succumbs to a death.

  Y at - it a manufacturer Toshiba recommends that I should look for when buying a new Sata Drive?

  Thank you

  Hi drik123,

  No, there are no special manufacturing activity that you need to buy or are compatible with the laptop. Each 2.5 HDD with SATA connector works and is compatible.

  Also there is capacity limit on interface SATA so 500 GB or more will also work and recognized. :)

• Equium M40X: Need XP drivers for card reader and Lan

  I reinstalled xp on my laptop and came on the Toshiba site for drivers, but I can't find a card reader and the LAN does not seem to work.

  Any ideas where I can find these drivers.

  Hello

  The European driver Toshiba page provides all the necessary XP drivers for Satellite M40X.
  I found the driver v 1.0.3.1 Cardbus and the Realtek LAN driver v5.612.628.2004 for XP.
  So I really don't understand why you are not able to find these two XP drivers.

  They are there.

• CD/DVD-ROM for reading CD / DVD RAM only...

  I reinstalled Windows XP due to problems with my system works only with Win7.  I did a clean install.  Windows XP installed a generic driver from microsoft CD/DVD RAM.  For this reason, I am not able to access the DVD ROM discs, no discs as CD ROM and DVD RAM disks.  I know that there is a way to change things so the system sees that I have a DVD ROM and not only a DVD RAM.  It's just think WinXP that my readers are only DVD RAM drives work very well.  They work perfectly with CD and CDR/RW and will work with a store bought DVD.  I just can't figure how to change the generic Microsoft for DVD RAM DVD ROM driver  I had this problem before, I don't remember the fix. I deleted the registry entries, I deleted the readers, only for have reinstalled them with the original drivers.  I have 2 drives, both are LiteOn.  LiteOn has no drivers for the drive and says they are "plug and play".  Any help would be greatly appreciated.  Thank you.

  I tried this also.  He said: there is nothing wrong with my CDROM or it says that my CDROM is not able to write DVD and install one that can.  Thank you.

  To access device manager > right click on the CD/DVD rom device and choose uninstall. Restart the computer and allow windows to detect the new hardware.

• Equium L350D - mechanical problem with CD/DVD player

  Hello world! I hope that someone out there will be able to help me with this problem.

  I have a TOSHIBA EQUIUM L350D with a CARPET * A DVD-RAM UJ-850 s ATA Device like the CD/DVD drive. Recently, the small plastic disc that fits on the center pin and the handles of the CD or the DVD has started to come adrift when the drawer is closed and the rotation starts; It's a horrible grating noiise! The small plastic disc appears to push on the center pin and I tried pressing the home more firmly, but still, it breaks off at the speed.

  So I want to know: is there a way to secure the disc plastic safe? And if not, the only solution is to replace the drive? I don't know how I got into all this.

  Thank you very much in advance for your help!

  I m quite skeptical that you will be able to solve this problem. Check on eBay if you can buy the new driver.

  Replacement should not be that complicated, and it will be certainly simpler to solve this problem.
  If you need assistance with replacing optical drive let us know.

• Errors in device IO & DVD - RAM UJ-811

  Hi all;

  I am writing to ask support for CD-ROM/DVD-ROM for my Toshiba Laptop/Notebook drive. I have a Satellite P20-504, Windows XP Media Edition and as you probably know, the drive is a carpet * a DVD-RAM UJ-811. When I insert any type of disc, Nothing happens. The same car doesn t spin and sometimes I get the slightest glimmer of a drive next to my hourglass icon but then nothing. The problem occurred this morning, (21 November). I used the laptop and the DVD - RAM drive, I stopped the laptop after completing the work. 30 minutes later I restarted the laptop and the DVD - RAM drive is no longer worked, simple as that. There were no new downloads or updates within 48 hours before the breaking of this device. The computer laptop and DVD - RAM worked several times since a lot of new updates and downloads without problem. I can open the draw of disk by right-clicking on the icon for DVD - RAM in my computer so messages are going.

  I now get the following error message:

  D:\ is not accessible. The request could not be performed because of an i/o device error.

  Things I did to try to solve the problem including:

  1. Uninstalling the driver after reboot, the computer recognizes the new hardware and re-installed the driver automatically. Driver still does not.
  2. I have restored the laptop to a pilot to date earlier still does not.
  3. I ran Norton Anti Virus, (after the recent updates.) Driver still does not work.
  4 scratched my head a lot. Driver still does not.

  This is the second time I had this problem with the same notebook and I had to return the laptop to the shop for repair, and this problem seems very much the same as before.

  I understand there are UJ - 811b, an upgrade of the DVD-RAM driver that I currently have. After have been searching the net for advice on the resolution, it appears that masts * one readers get a bad press.

  Computer Toshiba laptop, Satellite P20 - 504 Windows XP Media Edition (Service Pack 2).

  Carpet * a DVD-RAM UJ-811 version 5.1.2535.0

  I just need a DVD-RAM that works, please.

  Appreciated all the support and advice.

  Thanks in advance.

  Kind regards

  Rob Winter.

  Hello Rob

  I use my Satellite P20-303 over two years and nave no problems until now. My camera has been bundled with DVD-R/RW drive and drive TEAC DV-W22E (DVD-RAM), I bought and I am very satisfied.

  It of a little slower but works perfectly.

  All that you have done so far is right, but I believe that this error message indicating that it is a hardware problem. It is possible that unit has power and you will be able to open it but it is not recognized by the system and cannot be used at all.

  In my opinion, you should contact the service partner. I hope that the warranty is still valid. If this isn't the case, you have to check if this problem persists after installing recovery complete. On this way, the device will be preinstalled clean and it works properly. If this is not the case, there is certainly some malfunction of the equipment.

  As I mentioned with my camera I use TEAC DV-W22E and I can just recommend to use this player.

  Good luck and let me know if you will be able to solve this problem.

• SD-R6372 player recognized as Mat * un UJ830S DVD-RAM

  Hello

  (Sorry, but I'm not very good in English)

  I have a TOSHIBA SD - R6372 DVDRAM in my laptop, but windows (XP) recognizes him as a CARPET * has DVD-RAM UJ830S. So I can't write DVD-R and DVD + RW. And when I wan't updtae firmware with SDR6372 - 1732.exe there returns the following error: "the target drive is not found.
  I guess is a driver's fault, but I can't find the driver anywhere.

  Please help me.
  Thanks :)

  Hello

  As far as I know, there is no special driver for any player and it will be used standard Microsoft driver. Player must be installed only for DVD-RAM DVD tool. Understand your problem a bit better it will be useful to know what model of laptop you have.

• Tecra A8 - Mat * a DVD - RAM UJ-problem reading 841S

  I have Tecra A8-143 (PTA843E) Lap, WXP Pro SP2 original. Later, I installed SP3 and the problem with the topic. Finally the time Mat * one impossible reed VERBATIM DVD - R (4, 7 GB) discs, even those who got burned in 'home' with Nero (or record now, I'm not sure), although reed he earlier without problems.

  In addition, the reader can Reed DVD-R and Memorex CD - R Verbatim discs. In the meantime I have installed and uninstalled several programs and we hope that the point is in the configuration, but I afraid that SP3 is "fatal error" and I cannot flee from resettlement.

  It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers? My experience is humble and I'll be very grateful for help.

  Thanks in advance.

  > It is strange to me that this driver for DVD - RAM is Microsoft. can I install Mat * original drivers?
  As noted in the previous announcement the CD/DVD drive is still controlled by Microsoft Windows driver!
  There is no other pilot who could control the STRANGE

  Back to your question;
  There are two reasons why your CD/DVD drive does not read the disc;
  First the disc would be insufficiently supported or the s drive laser lens cannot handle the disc to the stress matrix laser lens could also not be clean
  You could clean the lens with a cotton tip and alcohol
  In my case it helped

• Qosmio G20 - DVD RAM i/o device error

  Hello

  I need help.
  My dvd ram driver do not work dvd.

  When I run the dvd he told me "the requested could not be performed because of an i/o device error" and I don't know how to fix it.

  Try to remove the optical drive from Device Manager, and then restart your laptop.
  The reader should be recognized again and correctly installed.

  Please try to test again the feature with CD or DVD media.

  You can use ODD as boot device?
  ODD is displayed correctly in Windows Explorer?

• Need driver CD/DVD RAM for Satellite L20 - 206

  Could someone please tell me where I can get a download of the driver for the carpet * a DVD RAM UJ - 841S?

  Hello

  just a quick question: why do you need drivers for a player that is automatically recognized by windows and doesn´t need to separate all drivers?

  If your reader is not working properly, then there may be another reason for. Have you encountered problems, which then you lead to the conclusion to the research
  for some drivers?

  welcome them

• Portege A600 - need driver for MAST * A DVD-RAM UJ 862AS

  Please, where can I find the driver for:

  CARPET * A DVD-RAM UJ 862AS

  Thank you in advance.

  Sabre - Italy

  Hello

  Why do you ask for it? The drive is not visible?

  I mean that the driver is not required for ODD (optical disc).
  Windows uses the Microsoft own driver who is still part of the Windows System.

  You see a yellow exclamation point in Device Manager?
  I recommend the removal of the STRANGE in Device Manager. Then, you will have access to the registry and should remove the Upperfilters and Lowerfilters completely from the following registry key values:

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  After that, you have to restart the device.

  Check and I think that the STRANGE should reappear.