Firmware for Linksys E1000 so far

Similar Questions

• Linksys E1000 - OK for Netflix?

  Hello world.

  My apologies if I posted in the wrong forum.  I've been streaming Netflix through my Wii (wireless).  Yesterday, my router is dead.  I picked up the Linksys E1000.  However, I am not able to stream Netflix more.  All the other functions on the work of the Wii (internet channel, shopping channel, etc...).  Wireless internet connection out OK on the Wii and my laptop.  My question is this: I would be able to stream Netflix through the E1000 or do I have to upgrade?  I thought that a router is a router.  As I started to try to solve the problems, I found a few forums that lead me to believe that maybe this isn't the case, I might need to buy a router that allows streaming.

  Any input would be appreciated.  Thank you.

  Brian

  Yes, you should be able to.

  There is another section called "small business", try asking here to better help.

• Need new firmware for the drive (Mat * un UJDA750)

  I have a Satellite M30 with a carpet * a player combined UJDA750. Anyone know where I could get a new firmware for the drive?

  THX.

  Hello

  I put t know why you need a firmware for your combo drive.
  As far as I know the carpet * a combo UJDA750 driver works with the Windows driver very well.

  Good bye

• Latest version of the Firmware for a-300 Alpha?

  What is the latest version of Firmware for a-300 Alpha? My camera shows ver 1.00 Sony issued an update?

  As far as I can find, no, it was not an update (someone correct me if im wrong)

  Here is the link to download the driver of your camera

  http://eSupport.Sony.com/us/p/model-home.pl?MDL=DSLRA300&template_id=1&Region_ID=1&tab=download#/Dow...

• Parental control for Linksys EA6500 V2

  I learned recently that the parental control I set up for my children do not work.  I disabled parental controls and allowed them.  I checked to make sure I have the latest firmware for the router said, I completely reset the router and back.  However, the parental control does not work.  I tried on my devices to block the internet and I am still able to access the internet.  Please can someone help or should I just go with another router?  It's very upsetting.

  Current version of the firmware: 1.1.40.166281

  Shawn

  @gotur6

  Please Flash the firmware of the router, you can download it from here. Reset the default router and configure manually, do not save the settings. Configure the control parental again. Cycle power to the router. Let us know how it goes.

  Chiqui-17359

  Linksys technical support

• Cisco Linksys E1000 Wireless-N Router

  If anyone knows please tell me about "Cisco Linksys E1000 Wireless - N Router" and how it is maximum cost?, coz one of my friends have this router and I think to buy it. so I want to know that all the failures have in this series of router. I would really appreciate it.

  Hi supun.aka,

  I can say that it is one of the stable the Linksys routers.  Once you have configured, make sure that the network is secure and the router's firmware is up to date.

• Linksys E1000-N Wireless mode

  I have a problem with my router. The Linksys E1000.

  In my opinion, that it supports Wireless-N mode, so my wireless lan card which is the Atheros AR5B93 (also known as the Acer Nplify 802.11 b/g/n). When I connect to the router, it connects only mode normal wireles, so not b, g or n. But when I look at the customer router Tabel all devices connected to the router in Wireless-G mode. Even my laptop connects Wireless-G mode.

  I want to have my laptop connected to Wireless-N mode. What should I do to make this work?

  (Sorry for my bad English!)

  If you connect to 130Mbps, you are already in N mode (everything above 54, 75Mbps even limited most adapters 1/1 N). I thought that the problem in your whas OP the plain inability to be stuck with g 54 Mbit/s.

  TBH, the difference in speed between (up to 150Mbps) 20 MHz or 40 MHz (up to 300Mbps) 2.4 GHz is almost zero, unlike 5 GHz. If you visit this link , you will see that is happening in this model during a test in the two modes at various distances, where 20 MHz may even work better further.

  But if you really want to connect at 300Mbps, what is the problem if we let him just "wpa2-PSK', 'auto 20/40' and 'mixed mode' if it is already connected in N 300Mbps mode? When it is set to that, an adapter is only 54 Mbit/s if it is G only. Beware that your router might go down later to 20 Mhz (130Mbps) if other networks that overlap can be found on the channel extended because of the rule N.

  BTW, if you use only "N" and "auto 20/40" stays in 130Mpbs, by setting a channel manually * could * force it to 300Mbps even if only for a certain time (see above). " After applying these changes, always disconnect and reconnect your adaptor. If you do not, your windows reported speed will remain the same (130 when 300 is possible).

  Using a program like inSSIDer will tell you the maximum supported speed for SSID of your router

  In addition, if the customer table of your router tells you that it is in wireless mode, well, it's because it is. Wireless mode refers only to a Wifi hotspot, no matter if A/B/G/N, the opposite of being locally through an ethernet cable.

• "End of the upgrade of the firmware" required on E1000?

  I recently bought an E1000 router and had to put in place manually (with the help of technical support) b/c the Connect software wasn't working properly with my computer.  Today I called the technical support to ask about upgrading the firmware - for security reasons - I'm not having problems.  They walked me well to download the new firmware updated, navigation on the desktop and install it.  (I have nothing decompress).  I told them I thought I had to do a hard reset 30 seconds or something and reconfigure and I was told this is not necessary.  The site says that all the 4 steps should be performed in order to update the firmware correctly.

  If my browser seems to work correctly afterwards, and the listed version is the new version, should I do the hard reset and reconfiguration?  If I did not, is the firmware upgrade completed?  During the process, we me no what this is pointing upwards, is back.  However, after initially installing the router, I made a backup on mine, just in case.  Not sure it would do any good, however, as he himself has automatically saved as file Outlook for some reason any.

  Thanks for any help!

  If the updated version is indicated on the page of the router and all the devices in the network works fine, then there is no need to reset the router.

• Firmware for the F348XP - N77 - 23 Nexus module problems

  H,

  I hope you had great Christmas time! I am currently working on the new Nexus lab, and I have a challenge.

  I try to get 1/10 Gbit / s Ethernet Module running. Do you know where to find firmware for this module and how to set the variable initialization for her? What I get so far:

  introduce the module:

  Status of Module Type mod Ports model
  --- ----- ----------------------------------- ------------------ ----------
  1 48 1/10 Gbit / s Ethernet Module N77 - F348XP - 23 ok
  2 48 1/10 Gbit / s Ethernet Module N77 - F348XP - 23 powered-dn! This one, with that I'll have the problem
  3 0 active supervisor Module-2 N77-SUP2E *.
  4 0 supervisor Module-2 N77-SUP2E ha-standby

  When I try to turn it on by entering

  (config) # No module poweroff 2

  I'm more about newspapers:

  2015 Dec 16 00:38:23 % xxx platform-2-MOD_DETECT: Module detected 2 (serial number JAE19290A6J) Type of Module-1/10 Gbps Ethernet Module model N77-F348XP-23
  2015 Dec 16 00:38:23 % xxx platform-2-MOD_PWRUP: Module 2 under voltage (serial number JAE19290A6J)
  2015 Dec 16 00:38:23 % xxx platform - 5 - module MOD_STATUS: Module 2 - current situation is MOD_STATUS_POWERED_UP
  2015 Dec 16 00:40:02 xxx % BIOS_DAEMON-SLOT2-5-BIOS_DAEMON_LC_PRI_BOOT: System started from the main BIOS Flash
  2015 Dec 16 00:40:05 xxx % FW_APP-SLOT2-2-FIRMWARE_IMAGE_LOAD_ERROR: error extraction and loading Firmware: firmware Flash and software images are bad
  2015 Dec 16 00:40:06 xxx % MODULE-2-MOD_FAIL: initialization of the module 2 (serial number: JAE19290A6J) failed
  2015 Dec 16 00:40:06 xxx last message repeated 1 time
  2015 Dec 16 00:40:06 xxx % PLATFORM-2-MOD_PWRDN: Module 2 power off (serial number JAE19290A6J)
  2015 Dec 16 00:40:06 xxx % PLATFORM-5-module MOD_STATUS: Module 2 - current situation is MOD_STATUS_CONFIGPOWERED_DOWN
  2015 Dec 16 00:40:06 xxx % PLATFORM-5-module MOD_STATUS: Module 2 - current situation is MOD_STATUS_POWERED_DOWN

  I take the problem is with the firmware, but I can't find the path to it. It there is no defined variable initialization is module 1, or 2, but module 1 started without problem.

  XXX # display the start module 1
  No set variable initialization module
  XXX # display the start module 2
  No set variable initialization module

  I can see the bin files under
  XXX # cd bootflash://module-4/
  bootflash://module-4/20150808_221923_poap_7580_init.log bootflash://module-4/vdc_3
  bootflash://module-4/20151211_010151_poap_8037_init.log bootflash://module-4/vdc_4
  bootflash://module-4/20151211_015441_poap_7723_init.log bootflash://module-4/vdc_5
  bootflash://module-4/lost+found bootflash://module-4/vdc_6
  bootflash://module-4/N7700-S2-dk9.6.2.12.bin bootflash://module-4/vdc_7
  bootflash://module-4/N7700-S2-kickstart.6.2.12.bin bootflash://module-4/vdc_8
  bootflash://module-4/scripts bootflash://module-4/vdc_9
  bootflash://module-4/vdc_2

  but I'm not able to assign variable initialization module, I see 1 - sup and sup - 2 only

  XXX (config) # boot system bootflash://module-4/n7700-s2-dk9.6.2.12.bin?
  
  SUP-1 input sup-1 to set up the 1st sup
  SUP-2 input sup-2 to set up the 2nd sup

  I hope that you would be able to help!

  Happ new year as well! :)

  Hello

  Do you have these linecards at the same time? I see that module 1 is the same model and do not have any problems. Did you open a SR of TAC for the same thing? I saw some similar cases where these messages could be the result of a faulty hardware, but you can open a folder of TAC to continue the investigation.

  HTH,

  Wes

• Apple AirPrint works Linksys E1000 - does not RV-220W

  As said subject line - have a linksys E1000 unit which the AirPrint service works anywhere wireless iPhone - iPad and Mac Books, when printing on an Epson Workforce 545 wireless printer. States of firmware to be updated on the Epson.

  Recently replaced the E1000 with a unit of RV-220w and get "no printer found" on iphones - ipads. Work on MacBook Air unit.

  Hello discovery service is enabled on the RV220w - active feature WMM on the SSID (by article I read) - IGMP enabled by another article I read, still does not.

  Have re-installed the E1000 as temporary until I can find a solution on this issue. If someone has any suggestions, would be appreciated. Very little info, go the route of google search. TIA

  halmillett,

  Go to the Wireless-> basic settings. Check if "Wireless Isolation in SSID" is enabled. If so, disable it and try to print wireless. If this does not work, try to connect the printer to the router with an ethernet cable temporarily and a test. I use a RV220W at home with a Brother wireless printer and it works perfectly since all devices Wi-wired and wireless.

  Everything is on the same VLAN?

  Just reply with the results.

  -Marty

• I have a desktop with windows 7 and a linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  I have a desktop with windows 7 and a Linksys E1000 router and you want to connect a laptop with windows 8, it will work router?

  Yes, it should work perfectly, if wired (Ethernet) or wireless.

  Click on the network icon in the Notification area

  Click on the available wireless network that you want to connect

  In the list of available wireless networks, click a network, and then click on connect.

  Some networks have need a network security key or password. To connect to one of those networks, ask the network administrator or service provider for key security or password.

• Error message on the download of update of firmware for airport

  Get an error message when you try to download the update of firmware for the airport. Have disabled the Wi - Fi for all devices; powering down of the airport; MacBook connected to the router via a cable; access to Internet but the download update still gives an error. Any ideas on haw to get the update, or what is the problem? Thank you.

  The error message say, exactly? What version of Mac OS X you are running on this machine?

  For updates of the firmware to work, you must be connected to your device from the airport and connected to the Internet at the same time. If you have a situation where you have to disconnect from the Internet to connect to your airport device, it does not work, at least not for the first time, you have to download a firmware version for the same model of AirPort base station.

• restore the firmware for macbook pro 13 mid 2009

  Hi all! This is my first time using the support community so forgive me for any rudeness and English summary.

  I recently bought a used mid 2009 macbook pro 13 "with no disc on this subject, I installed a new empty 120 GB ssd drive.

  I asked a friend and he has downloaded and made me a usb bootable with osx on it (lion). I instaled the osx and got the macbook running successfully and it was perfect.

  I decide to update and went up el capitan wich sucessfully installed. After the update I tried it out, web navigation simple, when suddenly, out of nowhere the mac stop (much battery left and the led indicator to confirm) and has not started since... when I turn it on the led light flashes and it gives the s.o.s. beep (3 short beeps followed by 3 long beeps and then 3 short beeps) the optical drive made his usual looking noises of boot and the fan continues to spinning, I tried to remove the battery 10 minutes several times and nothing... I read a lot about the problems of ram tested with one stick at a time in the two slots and no improvement... bought a new pair of hynix 2 gb 1066 mhz pc3-8500 ddr3 sticks as recommended for this model and replaced the "old"... did nothing.

  I have no original discs just the macbook itself and the charger. Also tried to boot from the usb drive... not good... tried to start mode revovery... nothing that the black screen and a beep sounds.

  I did some research and read a looooot online and in discussions such as this apple and found it to be the sound warning for bad/corrupted efi rom (as opposed to the majority of people declaring it to be a ram issue) which needs to be restored or flashed... However, apple does not provide or at least I can't find a picture of recovery for my model cd special I know it's the macbook 5.1 (a1278 / emc2254). Is there any solution for this? Please help in some way that you can welcome suggestions!

  Thank you

  Then, you say at the end of your post, you say that it is a MacBook, but it is a MacBook Pro. Check which model you have.

  On the updates of the EFI and SMC firmware for Mac computers with Intel processor - https://support.apple.com/HT201518

  What to do with all these "beeps mean at the start? - http://forum.insanelymac.com/lofiversion/index.php/t62919.html

  Power on self-test beep definition - part 2 - http://support.apple.com/kb/HT1547 - old Macs

  Mac Power on Self Test RAM Intel processor error codes - http://support.apple.com/kb/HT2341

  iMac (mid 2007) and later models: on startup tones - http://support.apple.com/kb/HT2538

• I need the firmware for the Toshiba excited AT7 B618

  Hello

  The Tablet keeps showing a message

  Unfortunately, it stopped secret lock

  Ok

  When I press OK it comes again.

  I fact (power + key) factory reset, but it does not solve the problem.

  I installed antivirus it found 7 threats, but he did not remove it because it becomes the vendor applications. Viruses that are present in the backup.

  I need the firmware image to excite at7 - B? Please reply with the download link.
  
  Device name: AT7-B618
  Unit number: PDA0HV-002004AR
  Product group: TOSHIBA

  Best regards
  Department of health Shair
  
  Thank you
  

  I have the same problem, why not support a large company like toshiba product, why I can not download a firmware for AT7-B618?

  Please I need this firmware
  Best regards

• Firmware for the SSD THNSNJ128G8NU

  Hello

  I can't download the firmware for my SDS: THNSNJ128G8NU
  My laptop is a msi Ge72.
  Can you help me.

  Thank you

  I think that this firmware update is not yet available...
  Where new firmware is available, you should find it on this page:
  http://Toshiba.SEMICON-storage.com/e...t-SSD/Hg6.html