Satellite C850 - no wireless after the BIOS update

Similar Questions

• How to activate the LCD in Satellite C850-B374 sensor after the BIOS update?

  Hi, friends

  I m currently a customer satisfied with Toshiba since April 2013. I've been using laptops since 2007 after using different brands, I found Toshiba to be good.

  I recently updated the Bios from 6.0 to 6.50 of the Toshiba service station.
  Update was successful and the computer works fine.

  But after restarting the LCD sensor that activates the power button in this model of laptop does not work. After entering the utility parameter that I came to know that CE of bios version is 6 and bios version 6.50 so how to activate the sensor lcd start automatically while I open the lcd screen

  Ashik

  > How to activate the sensor lcd start automatically while I open the lcd screen

  You want to start Notepad by opening the cover. Right?
  In this case you should enable the option in the system of Windows 8 settings

  [Why my laptop Windows 8 start automatically when you open the cover of the display? | http://APS2.Toshiba-tro.de/KB0/FAQ2C03FA0001R01.htm]

  "You need to find the option called: + open Panel - Power On" feature.
  This option must be enabled in order to automatically start the computer when the display lid is opened

• Satellite P100-240 starts after the BIOS update failed

  Hello, let me start by saying im a fool...

  Downloaded some drivers for my toshiba p100 240 and noticed there is a BIOS update, I downloaded and ran the program only so he can get to
  an error that it only will allow the administrator to run the program. My laptop has become slow and did not allow me to stop by all means. In the end, I took out the
  battery and rebooted to see a blank screen, no boot or anything on the screen.

  I'm afraid, I totally killed my machine and its about 4 months out of warranty, Im sure there is no cure miricle at low cost for this, but if someone can give me my options here I would really appreciate it.

  Thanks for your time,

  Martin.

  Hello martin

  Sorry to hear that. You're certainly not a fool and you are not the first and not the last with this bad experience. Unfortunately it doesn't have much to do. Contact the service provider authorized in your country as soon as possible. They will help you.

  Good luck!

• Satellite A500-136 died after the BIOS update.

  Hello friends...

  Today, I tried new BIOS flash, but in 21 of the 37 it stuck.
  I waited for an hour, but nothink, just stuck.
  No one key is active.

  Then I removed my batery and tried to turn on the computer and the screen is black.
  Nothink else does not appear here. I think the bios is dead...

  WHAT I have TO do, I don't want to get to the guarantee, because I need to wait a month, only then my computer will be fixed.

  Please help please please... :(

  SORRY FOR MY POOR EANGLISH

  Hello

  It s a shame hear that mate!
  It seems that something was wrong during the update of the BIOS, and so the laptop won't turn on.
  I'm afraid that you can't do anything else as to contact the local ASP m!

  The local ASP technician must check the device and possibly it might update the BIOS using a special BIOS and the special procedure.

  Good luck buddy

• A series of satellite does not start after the BIOS update

  After update bios with the downloaded utility my laptop does not start.
  Do you have this case covered by the warranty?

  I'm not sure if this would be covered by the warranty. You must contact the ASP in your country for details, but I assume that it s not covered.

  PS: Did you try this work around:
  -remove the battery, disconnect the adapter
  -wait ~ 40 min
  -connect the two devices again and try to turn on the laptop

• Satellite L300-1 has 3 - after the BIOS update, I get a BSOD

  I have a Satellite L300 1A 3 MODEL PSLB8E. I decided to update the version of the BIOS, thinking that he can resolve my issue of ethernet controller.

  But after the update, my laptop goes on infinite blue screen of death. How can I recover from this injury?

  Can someone please help.

  Hello

  Did you choose the good BIOS update for your model? Was it for Satellite L300 PSLB8E?

  What code you get BSOD?

  After the BIOS update you must always load the default settings. Maybe a bad BIOS setting is causing this BSOD.

• Satellite A300 - after the BIOS update I can not install two OS

  Hello everyone:

  I bought a laptop Toshiba Satellite A300-247 with Windows Vista Home Premium.

  Then I formatted it and divided the hard (320 GB) into 6 partitions and installed Windows Vista and Windows XP on drive C to drive D after having changed the SATA controller mode in the BIOS for compatibility. The computer worked well with 2 operating systems. However, when I updated the BIOS to version 1.9, two operating systems stop working and one of them can be installed: XP can be installed when SATA controller mode is placed on compatibility and Vista can be installed only when the SATA is changed to AHCI.

  Is there is no explanation of what past? And can I install operating systems 2 together again?

  Thank you

  Hello

  First of all, I doubt that this has something to do with the BIOS update. I think that after the BIOS update HARD drive mode has been changed from AHCI to compatibility and therefore the OS didn't start.

  Anyway, in compatibility mode you can install Vista and XP without the SATA drivers. This should t be a problem.

  But do you know the difference between compatibility and AHCI? AHCI mode is faster and therefore I would recommend this mode.
  Like you said Vista you can already install in AHCI mode and for XP, you need Intel Storage Manager. This package includes the SATA drivers you need and here is a step by step guide to use these drivers:
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm

  Last but not least, you can install 2 OS. You can do what you want! ;)

• Satellite A500-138 60 fps instead of 99 fps after the BIOS update.

  Hello!

  Before I have a little problem with my fan, but I do it with the BIOS update. His work!

  Now, I have a little problem of different...
  I am a player of counter-strike and before the BIOS update I have 99.9 FPS now, I have about 60... Who is wrong?

  Its make me crazy...

  Hello

  Seems the CPU and GPU don t run full implementation after the BIOS update.
  Any performance CPU/GPU leads to lower the heat dissipation and this means that the cooling module does not need to execute quickly and very often.

  Check to see if you can change an option is the BIOS.
  You can also try to update a graphics driver and could control Windows 7 power management.
  Power management settings 7 victory could affect CPU and GPU performance to save battery power and reduce the heat dissipation.

• Satellite P200 - after the BIOS update I can't start the machine

  After the BIOS update I can't boot the laptop because the system doesn't recognize the relecommunicarions password.

  Before updating the password is 0000.
  After when I try to set the password incorrect password start apeeras

  The BIOS password can only be removed from an authorized service provider. So I think that there is no other way.

  On the Toshiba site, you can search the nearest:
  http://EU.computers.Toshiba-Europe.com

• Satellite L350 - does not start after the BIOS update

  Hello

  I recently (yesterday) downloaded the latest version of bios update dated dated 25/02/10 2: 20 - WIN, after download and does run the software from the laptop immediately stopped working and stop. I am now no longer able to boot up the laptop at all, all I get is the power light on and the hard disk light flashes, I hear the spinning CD/DVD drive, but what is not screen anything, I don't think this is the start.

  Is there a way to fix this without taking it to a store/engineer, BIOS recovery?

  The laptop is a Satellite L350, I opened the laptop to try to reset the CMOS by removing the card mother battery (not sure if it would have helped), but as much as I know it doesn't have an or I'm not.

  Any help would be greatly appreciated.

  Thank you

  Andy

  Hi Andy,.

  Hmm... If the BIOS update failed, you can't do anything because only an authorized service provider has professional diagnostic and recovery tools to redo an update.

  So in my opinion, you must contact a service provider authorized in your country. Get in touch with the guy and ask for help. They will tell you what to do now.

  Here is their list:
  http://EU.computers.Toshiba-Europe.com > support & downloads > find an ASP.

  Good luck! :)

• Satellite Pro L300 - which improved after the BIOS update

  Hello users,.

  I just finished an update of the BIOS on Satellite Pro L300 using Updater Insyde Bios. I tried the Toshiba site to see what's new or what has improved since the update my bios 1.7version v2.2. But there is no search results. I also went to the site Web Insyde, but neither have they put up what has changed or improved?

  Is there a documentation or information which could help me to know how my laptop has improved or better after the update of the BIOS and what has changed since my update of the BIOS?

  Thank you

  Hello

  I assume you mean a changelog of the BIOS. Well, normally this document is placed on the Toshiba page where you can download the BIOS update.

  If you can't find such a t changelog, there is no available changelog. All that s!

  In addition the BIOS update should be performed only if it of really necessary. This means that if everything works fine, I don't see a reason to update because this update is a bit risky.

• Satellite L300D - does not load after the BIOS update

  I had to update my bios & it seems that that wrong has been downloaded about 3% by installing the laptop just die and not to revert to.

  There is no lights & there is no noise from the laptop at all.

  Can any ideas on how I fix?

  The laptop is a Toshiba Satellite L300D

  Hello

  Well, if the BIOS update crashed you can do anything because the ROM module needs to be reflashed. This is possible only with special tools and only an authorized service provider has such tools.

  Then please contact the nearest service Toshiba and ask for help :)

• Satellite A200 (PSAE0C-AH308C) - after the BIOS black screen update

  Hello

  I have a Toshiba Satellite (model No. A200; Part No. PSAE0C - AH308C) and to install Windows XP on a version already corrupted Vista (which had 4 partitions, that have been corrected, erased, then reformatted in a solid block). Now, I have installed all the appropriate drivers off Toshiba Canada support site...

  Everything worked, but I wanted to see in Windows (since I just got this computer) if everything was in place and working normally until I installed Ubuntu... Then I did the update to the BIOS flash. The program is supported in two formats, one for Vista and one for XP... for XP has a more high at 5.20 and Vista BIOS version the 1.80 revision of BIOS... that are marked as being updated by the Toshiba site. I opted to download the latest version of the BIOS.

  Things got ugly as soon as I unzipped the self-extracting program. First of all he said he could not find a .dll file (even if it is clear from there), so that seemed as if it started to Flash the BIOS but has not finished (it was just what happened when I opened the program)... I think he got to the ROM of compensation but did not have any code in there... Windows attempted to close the program because he did not respond, and I tried to take the program... had the same .dll error, but this time, the screen of the program was just gray...

  Given that this program is not Flash the BIOS unless the user selects the button "Flash BIOS", I have reason to believe that it was a bug in the program, or a combination of it and Windows comes to interfere (no program were running at the time, while he was supposed to be a dedicated flash). I can only flash in the Win.

  Now, I rebooted the computer, twice... the screen turns black, the HARD disc spins, the DVD drive has done his usual clicking sound when the computer starts, but it seems to stop as there is no BIOS entact.

  Can I replace the BIOS chip? There is no way for me to access the BIOS at all.

  Thanks for any help on this

  Thank you & best regards

  Muhammad Asif
  Manager

  THE COMPUTER HUT

  Center of the screen:
  F-115 trade place treat Saddar Karachi.
  Branch:
  G-31 place of trade treat Saddar Karachi.
  Headquarters:
  711-712 treat Trade Square Saddar Karachi.

  Tel: (+ 92-21) 2765359, 2734131 (Ext) 601
  Fax: (+ 92-21) 2724968
  Cell: + 92346-3277193
  E-mail: [email protected]

  Hello

  Unfortunately, the BIOS update has failed and now BIOS is damaged. For this reason, you cannot start and use your laptop. I agree with Luke. Please contact nearest Toshiba authorized maintainer and ask for help. Talk with them and I am sure that you will find the best solution to this problem.

  Satellite A200 is quite long on the market and it is hard to believe that updating the BIOS on the Canadian page may have a bug. All updates are tested and used by millions of users and service providers. If there is something wrong, I do not believe that this update will be available on the page of public support.

  In any case, contact the nearest service provider and explain the situation. Believe me this is the best thing you can do now.

  Good luck!

• Satellite U400 - after the BIOS update I can't start Windows

  I have laptop Toshiba Satellite U400, PSU44E and Win XP. After you have installed the new BIOS v. 3, 80-WIN32, it is not possible to start Windows, it always ends in restart. It is also not possible to reinstall Winsdows, as it always ends with the blue screen.

  Any help or suggestion?
  How can I install back my backup BIOS BACK?

  Hello

  Did you really choose the good BIOS for your laptop? Because on the Toshiba site Web are different models U400 has so you choose for PSU44E BIOS on Toshiba page?

  After the BIOS, you should load the default settings in the BIOS.
  Did you check that?

  A downgrade from the BIOS is not possible. This is possible only from an authorized service provider. So, you should contact them and ask a technician for help. I m sure they will help you. ;)

  Good bye

• Satellite L855 does not start after the BIOS update

  I downloaded the BIOS update and followed the instructions there during the installation, but on reboot (including the requested configuration), I get a blank screen. Intermittently, the CPU fan starts and stops. I think that the BIOS update failed, how to solve this problem?

  Thank you
  Neil.

  Hello, Neil

  In General when the BIOS is screwed up you need professional help and you should contact the nearest Toshiba service provider and ask for help.

  See also this thread. Perhaps this methid can help you too.