First broadcast 13 items under Windows 7 64 fading little problem to black at the end of the video.

Similar Questions

• Driver with ATI Radeon HD 3850 AGP under Windows 7 Pro 32 bit problems

  Windows 7 Pro 32 bit reports after installation of the driver that no driver is present. There was patch drivers provided by ATI to solve these problems, but these drivers did not resolve the problems. Has anyone had success with this installation, and if so, would you please provide me with how you did this? Thank you. BTW, I did the ususal uninstall and then install, reinstalled the operating system via a facility clean and then installed the drivers, etc, etc. So far,nothing has worked. After Googling this issue I found that many others have had similar experiences with these driver problems. Now I have XP Pro and Win 7 Pro installed via dual boot and XP Pro is running pilots ok with no problems. Thank you!

  I came across the work of question three years ago on one of my machines.

  It is a problem of compatibility between the nForce 3 and AGP.  I don't remember the exact details, but with a nForce 3 and similar day SIS chipsets and a few others when they had a dual-core CPU in them, they would change the AGP port to use a PCI driver or something of this nature to enable the multi-core support (such as it's been hacked on toward the end of their development).  On Windows Vista and upward, such a workaround solution does not work.  SiS and some other published updates driver for the motherboard chipsets which he sorted, nVidia did not worth it, despite nForce 3 sold as Vista compatible.  nVidia pulled this stunt with a lot of things at the time, including their GeForce 5 cards, saying they supported Vista, same with the beta drivers and then they just canned originally.  They took both.

  It is a solution that will be the kind of work, but as you may have guessed, you will need to disable one of the cores of your CPU.

  You can do this by going to msconfig, click on the Startup tab, click Advanced... and changing the number of processors at 1.

  Reboot and your graphics drivers will spring magically to life.

  Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet atwindowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)

• 650 HP laptop Windows 7 64-bit boot problem after installation of the graphics driver

  I bought the HP 650 laptop which came with Suse Linux.

  I installed 64-bit Windows and tried to install the corresponding graphics driver:

  High definition (HD) of Intel Graphics Driver

  as indicated in the list of drivers for Windows 64-bit here:

  http://h20000.www2.HP.com/bizsupport/TechSupport/SoftwareIndex.jsp?lang=en&cc=us&prodNameId=5225013&...

  After installing the driver asked me to restart the computer and after the reboot, boot, Windows boot after displaying the Windows logo on black background the computer restarts again before you boot into Windows.

  After this crash to start a startup repair is suggested and I can complete the restore of the system that allows me to connect to Windows but I have not installed display drivers and things like Aero do not work.

  I tried several times and re - install drivers and had the same problem after each attempt.

  Help, please.

  It's quite a few updates failed.  This can be linked to the issue, but we don't know really until the update problem is resolved.

  Read this document to Microsoft as it addresses this particular error.  It also has various tools to try in case the first option does not correct the problem.

  You can also try the Windows Update troubleshooting utility included in Windows 7.

  Go to start > Control Panel > find and solve the problems under system and security > fixed problems with Windows Update under system and security.

  Let me know what happens.

• problem with update of Windows 'site has encountered a problem and cannot display the page you are trying to view.

  Hi all, I recently rebooted my dell xps m140 older and I would get all the updates from microsoft. When I go to this webiste - http://www.update.microsoft.com/windowsupdate/v6/default.aspx?ln=en-us...i click on purpose and he says:-"the website has encountered a problem and cannot display the page you are trying to view. The options provided below may help you solve the problem. "no work around for this?

  You must be at Service Pack 3 level before you can use Windows updates.

  How to obtain the latest Windows XP service pack
  http://support.Microsoft.com/kb/322389

  You have not provided us with sufficient detail as to what level you are at

  If you haven't already done so, you will need to install the SP2 and SP3 (SP1 note no longer exists).

  To determine which service pack is currently installed on your computer, follow these steps:

  1. Click Startand then click run.
  2. Copy and paste, or type the following command, and then click OK:
     winver

     A dialog box displays the version of Windows and the service pack that is currently installed on your computer.

  Installation of SP2 - http://support.microsoft.com/gp/xpsp2getinstall

  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717

• Windows media player: burning problems - value to burn the video audio switches as burning starts

  set to burn audio and just before burning starts, it goes to the video.   dv7 - 7270 for laptop of envy.

  Hi Wales23,

  I read your post about not able to burn videos on your HP ENVY dv7 - 7270 ca Notebook and Windows media player from switching to the video. What type of CD that you use? Are the things you're trying to burn copyright protected. You can try using the Cyberlink software provided with your laptop.

  Please let me know.

  Thank you.

• First Elements 11 - I have a problem with pinning of the video clips in the timeline.

  Hello

  I have a new Prime Minister 11 elements.  I'm working on a video with a narration track project.  Because I have to build animations in photoshop that go with the narration, I'm not editing in a way liner.  When I insert clips earlier on the timeline animations, it tends to move the clips of animation to the top or to the bottom of the timeline and sometimes he's trying to cut my narration.  Is it possible to pin the animations to a specific timecode on the timeline, which then will allow me to insert the live action clips inbetween with out having to sycn are ' animation to the narrative.  In older versions of the first I used years ago (and FCP), it's the titles of easy locking.  I know that you cannot lock a track in PE11, but is it possible to pin the video to the narrative?

  I too if I have to 'resync' animations to the narrative is there a way to select the entire animation (which is located on several tracks) to return it to its place compared to the narrative?

  Thank you.

  Unfortunately, pre has never added the ability to lock a track (something that PrPro and something that I and many others, have asked), so a change in workflow could be the best.

  For what you describe, I would just edit video 1 and Audio 1 (or according to the following you use), and then add your animations on 2 video tracks (or any video track above your edited Clips). All that is on a video track higher, it will be seen, regardless of which is lower than that, except if we adjust the opacity (to see through the Clip on the video track above), or they "drill holes" in this upper Clip, say with Track Matte Keying, or via a channel Alpha, or the Garbage Matte.

  Your animation will be seen and your Clips edited, weaker will not be made, other than that they are not visible.

  Another method would be to make an Insert Edit where your animation replaces a corresponding number of images in the Clip to which you drag, on the same video track. Just hold down the CTRL (Cmd on Mac key) and drag your animation to the place you want to so he can be at the Top of the clip here. Their mounts will be replaced by your animation.

  A third, if you want full "lock" video and Audio, would be to export/Share/publication chronology of the project, and then import the output file (it will no longer Clips, but will be a long Clip), then add animations, or whatever, by using one of the two methods above.

  Good luck

  Hunt

• , first 13 works items with windows xp?

  I have an old computer with windows xp, I want to now if this program works with windows xp, thank you.

  First 13 items is not supported to run on Windows XP and Windows Vista.

  Kind regards

  Team first Elements

• Tecra S1 under Windows 2000 Professional external display problem

  As I can't answer in the original thread (1831), because it is locked, I put here my answer to the answer of the Quad.

  Quad first wanted to know if we have installed the Tecra S1 on a recovery CD.

  No, we do not have. We have created an image that consists of an unattended installation. It is installed from a Windows 2000 RIS server.

  Quad also said that the Fn + F5 is enabled after the installation of the utility Hotkey for display devices.

  We downloaded the hotkey utility, but when we tried to install it we got the error message you "Driver not found" and suspended installation. We have installed as a user with administrator privileges.

  We do something wrong, or this utility owes something to be installed as well?

  Kind regards
  Harro Hofman
  Material specialist

  The Netherlands.

  Hi again Mr. Hofman,

  First of all I must tell you that this is a typical problem. AFAIK Tecra S1 comes with the Professional Windows XP Home edition and optionally with W2000 professional. This two OS has been tested and Toshiba offers all drivers and tools to Toshiba download website.

  It will be interesting how you created this image. What was the basis for this image? You are installed to the first completely Tecra and after created image?

  Have you had problems before the creation of the image?

• After that I have released a video in windows movie maker and go to to watch, sometimes the video freezes but continues to go to the audio. What happens here?

  I do not understand and it makes me quite Mad... what should I do to remedy this?

  Hello

  ·          What is the operating system installed on your computer?

  ·          The same thing happens with all movies you post?

  ·          The film freezes at the same spot every time?

  ·          He was facing the same issue previously (all changes made to the computer until the problem started)?

  If you are using Windows Vista, you can consult the links below.

  http://Windows.Microsoft.com/en-us/Windows-Vista/publish-a-movie-in-Windows-Movie-Maker

  http://Windows.Microsoft.com/en-us/Windows-Vista/movie-settings-frequently-asked-questions

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer starts and I get the Windows startup screen, then my screen goes black and the computer is frozen I guess. Stopping and restarting do not work.

  I get to the black screen with the Windows XP logo and the bar of the State, and instead of my forthcoming accounts page, the screen goes black and nothing else happens. I tried the power off to reset and restart, and I can't perform a recovery of the system with the CD.

  Hi cgrosenick,

  -What software changes you did on the computer before the show?

  Follow these steps:

  Method 1:

  Start your computer in last known good configuration mode.

  For instructions, see How to start your computer by using the last good Configuration in Windows XP functionality

   

  Method 2:

   

  Follow the steps in this article:

  Computer stops responding with a black screen when you start Windows XP

• Windows XP Movie Maker 5.1 will not save the video file

  The program hangs and displays my CPU maximum (or near it) its use. Admittedly my video file is nearly 500 meg but I simply trim/clip into smaller pieces for easy Assembly. Any ideas?

  Hello

  ·        What happens when you try to save the film? You get the error message?

  Method 1:

  I suggest you perform a clean boot, and then check if the Director of windows works fine or not. To perform a clean boot follow the steps mentioned in the link given below.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353/en-us

  I suggest you to check the article mentioned below to know what features are there in windows movie maker and how to use it.

  Start with Windows Movie Maker

  http://www.Microsoft.com/windowsxp/using/MovieMaker/getstarted/default.mspx

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• Windows Media Player 12 and problems such as playing the "function for a piece of music does not work.

  When I use the function "play to" in Media Player 12 the unit I'm streaming to a Pure Jongo A2 wifi adapter "opens and is visible in the drop-down list. '" The piece of music, then displays in the window open, but nothing happens. No sound.

  Any help would be appreciated.

  Friday, October 10, 2014, 15:30:18 + 0000, George O'Leary wrote:
   
  >>
  >>
  > Hope that this might help
   
  As I mentioned earlier, there is no mention of the DLNA certification.  I found
  http://support-UK.pure.com/kb/articles/220-i-m-streaming-tracks-from-my-PC-Mac-or-NAS-and-some-tracks-do-not-play
  which may or may not help.
   
   
  I suggest that you try their http://support-uk.pure.com/new-ticket support
   
   
   
  __________________________________________________________________________________________________
  Barb
  MVP Windows Entertainment and connected home
  My Blog - http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   

• Windows 7 Home premium network problem, computers can access the internet, but they do not see each other on the network

  I was trying to set up a homegroup on my main computer, but on the second computer, I never had the opportunity to join the homegroup. I'm sure that I have everything set up properly, but I can't get the second computer to join.

  I have a switch that my internet runs and a cat cable goes to each computer. Each computer can access the internet without any problem, but none appear in other network list. They have the same name of working group, I just can't understand it. I use Windows Firewall.

  Any help would be greatly appreciated.

  Maybe this can help.

  ----------------------

  Win7 when configured on the peer-to-peer network has three types of configurations of sharing.

  Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.

  Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
  
  Public share = network Public (as Internet Café) in order to reduce security risks.

  For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.

  http://www.ezlan.NET/Win7/net_name.jpg

  Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions

  General example, http://www.ezlan.net/faq.html#trusted
  Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  ------------------------------

  If your network consists only of Win 7 and you want a simple network, use it.

  http://Windows.Microsoft.com/en-us/Windows7/help/videos/sharing-files-with-HomeGroup

  After you have configured the homegroup, scroll to the bottom for the Permission/security section.

  -----------------------------

  Win 7 networking with other version of Windows as a work network.

  In the center of the network, by clicking on the type of network opens the window to the right.

  Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.

  http://www.ezlan.NET/Win7/net_type.jpg

  Win 7 - http://windows.microsoft.com/en-us/windows7/Networking-home-computers-running-different-versions-of-Windows

  Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm

  Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx

  Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
  Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx

  Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
  Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120

  When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.

  -------------

  If you have authorization and security problems, check the following settings.

  Point to a folder that wants to share do right click and choose Properties.

  In the properties

  Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.

  This screen shot is to Win 7, Vista menus are similar.

  http://www.ezlan.NET/Win7/permission-security.jpg

  The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.

  When everything is OK, restart the network (router and computer).

  * Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.

  * Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.

  ---------------------

  *** Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• Windows Live Mail: Page with email becomes black, and the upper part is correct. The rest becomes black, and the application stops responding.

  in live mail: page w / emails becomes black. upper part is ok (host-files-display-accounts) rest becomes black. I can close the program, re open and may be authorized.

  Hey Dano,

  The question you posted would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you
  http://windowslivehelp.com/product.aspx?ProductID=15

• . MOV stops flashing between black and the video in first pro cc

  I have created a. MOV in Flash cc and after that I have to export, it works fine. But if I import it in first pro; about halfway through it starts glitching on years spend my video and a black background. No effects have been used. just resized video to fit the image. How can I fix it?

  Purple?

  No, I want to say is yellow, green or red?

  If its red or yellow he return green see if that improves things.