First could not start due to 0xc000001d

Similar Questions

• VISTA: backup application could not start due to an internal error: (0 x 80080005) Server execution failed

  The backup application could not start due to an internal error:
  Server execution failed (0 x 80080005)

  Vista Ultimate - trying to COMPLETE the backup of a computer

  Hi people,

  I had a similar problem with Vista (64-bit edition complete edition) machine. I run automatic backups for more than a year. Suddenly, backups started fail with the following error code:

  "The file or directory is corrupted and unreadable 0 x 80070570.

  I thought it would be my external drive - so I tried an another one - same error. After a search of different topics around, I tried various fixes (similar to above), but none of them worked.

  I managed to find the problem though. The issue is not with the drive being written - it's the current backup disc that is the problem. If you want to save your primary drive (C:, for example), try to perform a check of the errors on this drive (right click on your drive home, you are trying to save, choose 'Properties' then go to 'tools' - click 'Check now' under the control of errors - and check both boxes). Since this is the current drive, you must stop and restart - the system then automatically checks the system files and windows files on the next boot.

  After doing this, my problem cleared up. Apparently, the backup software was crashing trying to read a corrupted file or a sector of the hard disk, that he was backing.

• CiscoSecure ACS 4.2 could not start due to failure of the services start bit

  There are few services that wasn't able to restart, they are as follows:-

  (1) CSAuth

  Error:-"Windows could not start the csauth on local computer. For more information, see the system event log. If it is

  a non-Microsoft service, contact the service vendor and refer to service 1060 "specific error code

  (2) CSTacacs

  Error:-"Windows failed to start the cstacacs on the local computer. For more information, see the system event log. If it is

  a non-Microsoft service, contact the service vendor and refer to service 1066 "specific error code

  (3) CSRadius = start

  the rest of services like CSAdmin, CSDbSync, case were lit.

  Also I am not able to take the acs system backup of the System Configuration-> ACS Backup and pressing backup now. It shows the msg of error as

  : - CSAuth service must be running to start the backup

  I was referring to the snapshots of the OS itself, but I guess you checked now.

  Do not forget that the case works so you should see logs for services that do not work. Learn about the \CSAuth\logs folder for logs CSAuth and other records for other services that do not work.

  There is a located here very detailed troubleshooting guide:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  This guide should help you solve the question if there is no other software on the server to cause trouble. One thing it says who can apply to you is to ensure that the Windows Firewall as connection sharing Internet is not ongoing.

  Because I am familiar with your server, I think you should do the quick test below for if sure there are not taken, which may be crashing the authentication services that you mentioned. In the command line, type "netstat - ano | Findstr Listening-i"and see if or not he has taken open your ports Ganymede + and radius. He will probably return false, but it's worth a check.

  Worst case scenario, you may be able to use CSUtil to back up the database (I'm fairly certain you can back up services that work), install the ACS on a new Windows 2003 server, and then restore. You can use CSUtil to many types of exports and operations as well.

  If you manage to deal with the problem or not, you should speak with the person who is responsible for making backups of your servers and make sure that something like this was coming once again that you can have a quick fix during a maintenance window.

• Wamp server which could not start due to lack of MVCR110. DLL

  I installed a wamp server that failed to start due to lack of MVCR110. DLL. but later, I downloaded the MVCR110. Update the DLL and install and the application started successfully. But the apache installation failed due to lack of VCRUNTIME140. DLL. This is why, wamp doesn't. Please, help me. Thank you.

  This issue could if the Package redistributable Microsoft Visual C++ 2010 is not installed correctly.

  I suggest you to uninstall all existing Microsoft Visual C++ Redistributable Package and install the latest Microsoft Visual C++ 2010 Redistributable Package to check if it helps.

  Follow the steps below:

  Step 1: uninstall the exit Microsoft Visual C++.

  (a) press Windows key + x and select programs and features.

  (b) right-click on the Microsoft Visual C++ , and then uninstall it.

  Step 2: download the latest Microsoft Visual C++ and install it.

  See the link below:

  https://www.Microsoft.com/en-US/Download/details.aspx?ID=40784

• «The backup application could not start due to an internal error: the specified service does not exist as an installed service.» (0 x 80070427)

  When you try to make a backup of wuch as "Create a system image" in Windows 7 Professional, I get an error. Windows Backup Service is on the list and he is even started.
  I have searched this forum and the internet and have not found a definitive resolution to this matter. This is a freshly installed Windows 7, and I have tried a clean boot and still get the same issue. I did a sfc/scannow and integrity is very well. I have Norton Internet securities 2010 and have not found any malware or a virus on my system. I really don't want to activate my Windows 7 support for a question that should work installed right out of the box of backup. I reinstalled not even one of my games or anything which could change windows somehow.

  Have the same Prob as Mezroc with Win7 Pro (64-bit). Maybe it's a coincidence but the problem started after a failed at startup Defragment using 9 System Mechanic!

  Looked at VSS, start, set it to auto, made no difference.

  Its now 2 days later and decided to restore System Mechanic registry change and now find the Back up and restore works again!

• Aspire 5943g could not start due to failure of the interactive logon process

  When starting my Aspire lap top the message "interactive logon process initialization has failed. For more details, please see the event log"However when 'OK' message, it just returns after 15 seconds so am in a loop of default. When trying to reboot in "safe" mode it shows the same message. I tried pressing the Alt and F10 keys together on first but nothing happens before the message appears. Is there a solution to this failure?

  Press DELETE to enter BIOS start, check whether the HARD drive on SATA devices, then check if the D2D option is enabled, then press F10, save and exit.

  at the next startup, press ALT + F10 and check if Acer erecovery begins.

• Backup could not start. 0 x 80070422

  I tried to restore some backup files and got this message.

  The backup application could not start due to an internal error:

  This service cannot be started. either because it is disabled, or because it has no enabled devices is associated to him. (0 x 80070422)

  When I go to the control panel and click Backup & restore, I get a screen empty with "Back up and restore your files" and nothing else. No option to click on.

  Can I only reinstall the backup restore program &?
   
  Any ideas on how to get this program to work?

  Windows 7 Professional 64 bit.

  Problem solved. Windows backup & restore has been disabled in the Services. The "Startup Type" value Manual and then started the process. Everything works now.

• Today my Macbook Pro could not start.  He showed me the ban or no symbol.  I was able to access disk utility and run first aid on the SM0256G of SSD Apple media successfully.  Cannot start in normal/safe mode.  Should I delete/install so I can?

  MacBook Pro 13 '' end 2015.  256 GB SSD drive. El Capitan last version 10.11.4. I turned on the Macbook Pro and it could not start.  The progress bar with the Apple Logo would be present but would end not showing the symbol «»  I tried to boot mode safe - no go.  I have not reset PRAM help.  I was able to access disk utility and run successfully the first aid. No help. I was unable to restore two separate backup.  The utility show me backups however when I would go to the next screen and no backup is available.  Disk utility displays the SSD.  Can I erase the disc and download OS X install?  Thank you.

  At this point, there is no need to delete. A new copy of Mac OS X can be installed directly over the old copy. This process replaces the components of Mac OS X on a file by file basis and adds missing ones, there will be no major throwing away what anyone, unless there is a power failure.

  You have already run disk first aid.

  Now use mode of recovery (command + R to start) to "Re-install Mac OS X. It should install the latest revision of the main version that you ran last.

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  The first cc was going well until the last update you want to open and then throws a sign indicating that the application could not start properly (0 x 0000142) and the program does not open

  
  

  Hi Marcelo,

  You may need to check this: Re: Premiere Pro 2015 won't open after the recent update

  Kind regards

  Navdeep Pandey

• Could not start during windows application reload

  I recently recharge experianced the following error message by finishing with Windows 7. I formatted the drive with Windows 7 x 64 disc and all files loaded without errors, after the reboot, I configure the user account, the time and all, then all by preparing the office, I got the following error:

  "The Application could not start properly (0 x 0000006). Click ok to close the application. »

  Hi Neo

  Thanks for your post in the Microsoft community

  The exception of code 0xc0000006 = STATUS_IN_PAGE_ERROR = data has not been placed in memory due to a State of error.

  I think you experience hardware failure - most likely the HARD drive or it could be RAM.

  First run chkdsk on your HARD drive.

  START | type cmd.exe in the start search box | Right-click on cmd.exe above under "programs". type the followng

  Chkdsk /r

  Then you will see something similar-

  Chkdsk cannot run because the volume is in use by another process.
  You want to schedule this volume to check next time
  the system restarts? (Y/N)

  Select there -, and then restart the computer. CHKDSK runs on the re-start.

  After working the chkdsk you try the sfc/scannow

• Can help to solve the issue of "the application could not start properly? < < Error after update CC

  After update Adobe after effects Adobe first Pro CC and CC, via the cloud to create, update, I get the following programs during the boot error message.

  Box "application error".

  "The application could not start correctly (0xc0000142). Click OK to close the application. »

  I had several programs that I've updated (Adobe PhotoShop, Adobe Audition, etc.), at the same time. None of the other programs seems to have problems starting.

  
  

  I uninstalled Adobe after effects Adobe Premiere Pro CC and CC and have the same results, aka, error notice, after reinstalling.
  

  
  

  I did some research and do not seem to have found a definitive solution to the problem.

  
  

  • Can you please help me solve this problem. If you have encountered this problem and it is successfully resolved your entry is particularly useful.
  • Can you suggest ways to avoid this, or similar questions in the future. It makes me feel very reluctant to update my software CC if I'm going to experience the hours/days/weeks of delay due to having to solve problems.

  
  

  Thanks in advance for your help.

  Hi Leslie,.

  After update Adobe after effects Adobe first Pro CC and CC, via the cloud to create, update, I get the following programs during the boot error message.

  Box "application error".

  "The application could not start correctly (0xc0000142). Click OK to close the application. »

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• First could not find any question capable video game modules?

  Hello! I have problems with Premiere Pro CC 2015. I'm dealing with the infamous "Adobe Premiere could not find capable video game modules. Please update your video display drivers"error message. I have not seen this error before ever, I tried work around listed here but it did not work for me, does not. Mac OSX, error starting with 2014 CC (CC works): could not find capable video game modules. My updates to the Apple system are also underway.

  I use this on:

  MacBook Pro, 15-inch retina, mid-2014

  OS: 10.10.5 Yosemite

  Processor: 2.8 GHz Intel Core i7

  Memory: 16 GB 1600 MHz DDR 3

  Graphics card: NVIDIA GeForce GT 750 2048 MD

  I don't know if this is useful or relevant information, but I will disclose it anyway. I had to do a recent restore via Time Machine. Due to the update of my CS6 Design & Web Premium Suite through cloud creative, in which Illustrator did not start due to an error message stating that "Adobe Illustrator was missing plugins" or something or another. That never occurred before. Once finished restoring Illustrator seemed to work, but then this error with first occurred.

  Everything that could help resolve this would be great.

  Thank you!

  OK, somehow, I got running again by reinstalling first. I do not know how, which has helped or worked but it did.

• Want H8-1534: could not start HP Envy H8-1534 pc after Windows update 10, 1607

  Windows 10 has made automatically update 1607 (KB3176936) on the pc of my wife (HP Envy H8-1534) about 6 days ago. Since then I could not start the pc the first time I turn it on.

  When I hit the power button on the monitor lights up with the HP logo on black screen as usual but the loading icon (spinning points) does not start. Fans start, but there is no activity on the Tower in the way of flashing lights or beep sounds. If I turned off the pc by using the power button, wait 10 seconds and turn on again, the pc will start up as normal. So far, for the last 6 days, it took the 2nd attempt so that it starts the pc every time. It almost seems as if there are not able to go to the system except for the fans in this first attempt to start.

  I ran a test at startup by pressing the F2 key without no problems found. I disabled the SATA power management in the BIOS. I ran the Windows startup with no result repair. Here are the results of the txt file.

  I researched all the possibilities. I fear that this could begin to worsen. Any help will be appreciated.

  Name: Target OS Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 265 ms
  The test is performed:
  ---------------------------
  Name: Checking content Volume
  Result: Completed successfully. Error code = 0 x 0
  Setting time = ms 2391
  The test is performed:
  ---------------------------
  Name: Diagnostic Boot manager
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 63 ms
  The test is performed:
  ---------------------------
  Name: Diagnosis of the system startup log
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: event log diagnosis
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 62 ms
  The test is performed:
  ---------------------------
  Rated: Internal audit of State
  Result: Completed successfully. Error code = 0 x 0
  Time = 0 ms
  The test is performed:
  ---------------------------
  Name: Start-up condition Test
  Result: Completed successfully. Error code = 0 x 0
  Time taken = 31 ms
  Root cause found:
  ---------------------------
  State the start indicates that the OS booted successfully.
  ---------------------------
  ---------------------------

  DBHPENVY,

  I turned off quickly startup on the pc and until now he started first try twice. I'll let you know how it does after a few days of testing.

  I read everything it does and it is perfectly logical, how it might affect our pc is the way. Go to this link and read about it and see if she could help. I thought I had turned off fast start already, but after an update he might have gotten turned on.

  Here is the link: http://www.tenforums.com/tutorials/4189-fast-startup-turn-off-windows-10-a.html

• Windows could not start on Satellite L510

  HI :)

  I'm not very tech savvy, I've only had my laptop a month. And yesterday, when I turned it back on I got this message...

  Windows could not start. A recent hardware or software change might be the cause. To solve the problem: Insert your windows installation disc, and then restart your computer
  If you do not have the disk, contact your manufacturer computer or system administration.

  file: \boot\bcd
  status: 0x000000f
  Info: an error occurred trying to read the boot configuration

  I have been all over these forums and the internet looking for a solution, but no luck. It's the weekend, so I can not communicate with the service line.
  I would appreciate a process step by step what it is, that I need to download or reset. I do not have the windows installation disc, because it did not come with my laptop.

  I really appreciate your help in advance ;)

  Hello

  Well, the error message says everything to me. Insert the Windows disk * or * contact manufacturing (Toshiba). ;)

  By the way: it would be interesting to know if you can boot into safe mode. Check it!
  If so, you may start the HARD drive recovery. Therefore, select Repair my computer in the Advanced Start menu and follow the instructions on the screen.

  Yes, with the laptop didn't come a disc, but you can create one!
  Please read the operating manual always first.

  Now it s too late to create such a floppy, but you can order directly into a new Toshiba:
  https://backupmedia.Toshiba.EU/landing.aspx