Could not start during windows application reload

Similar Questions

• Windows could not start during windows installation

  Recently, I had a number of issues of windows 7 on my computer with other things and I decided that it would be appropriate to do a complete reinstall of windows 7. I plugged my windows 7 installation cd and went to the installation. I deleted the partition of hard disk OS to remove my broken version earlier Windows 7 and made a new partition to install my new windows 7. I've been installing windows 7 and he said that it might take to restart my computer several times to complete the installation. The problem is that when it restarts, it is not actually proceed with the installation. Instead, it immediately opens a window of windows error recovery in the BIOS. The description is "windows did not start. A recent hardware or software change might be the cause. To solve the problem: 1. Insert your windows installation disc, and then restart your computer. 2. choose your language settings, and then click Next. 3. click on repair your computer. "I then followed the instructions but when I did the repair your computer option, I tried but it says that this startup repair couldn't fix it automatically. I then tried to reboot in safe mode, and he went to the installation screen of windows as if he was about to continue installing windows, but then he said that I was in safe mode and I had to be in normal mode to continue the installation of windows 7. So now, I have only a part of windows 7 is installed.

  If you have compatible hardware and your computer still stops responding, disable any unnecessary material. Remove (USB) universal serial bus devices. Remove or disable network cards, sound cards and cards of the series; and then restart the installation.

  Boot from the Windows 7 DVD

  Click Install now

  Accept the license agreement

  When the option is displayed to select a type of installation, click (Custom advanced)

  Click on drive Options

  Select the disc/s click on Delete

  Click new

  Click on apply

  Click OK

  Click Format, and then click next to proceed with the installation

• A small flag appears on the bottom of my screen that says activate security service Windows, but when I try to turn on it says could not start the Windows security service

  Original title: HELPPPPP

  My computer a little flag in the background with a x... said red it turn security service windows, but when I try to turn it on... it said windows security service cannot be started :/

  Hey ChelseaHarris,

  Take a look at two responses in the thread below the link to see if they allow the Windows launch security service:
  Could not start the Windows Security Center service.

  If these steps do not help, try to run a full scan using the Scanner from Microsoft which can be downloaded using the link below:
  Microsoft safety scanner

  Hope that helps.

• Could not start the Windows Vista firewall

  Hi all

  I can't start the Windows Firewall service in anyway.
  I can't open it via Control Panel, as it is said simply: "the Windows Firewall settings cannot poster because the asscioated service is not running. You want to start the Windows Firewall service? »
  I click "Yes", then he said: 'Windows cannot start the Windows Firewall service. There is no error code indicated.
  I tried running "wf.msc" using the Microsoft Management Console. When this window appears, he says: "there was an error opening the Windows Firewall with advanced snap-in security.; The Windows Firewall with Advanced Security snap could not load. Restart the Windows Firewall service on the computer that you are managing. "Error code: 0x6D9.
  As it seems, I can not start it this way or the other.
  I pressed Ctrl + Alt + Delete and click on the Services tab, then click services on the bottom, and this opens the Services window.
  In the new Services window, I try to start the service "Windows Firewall". I get a message saying: "Windows could not start the Windows Firewall service on the Local computer.; Error 1068: the dependency service or group could start. »
  Therefore, it does not. The service is set to automatic.
  I found another process called 'Base filtering engine', which I discovered is related to the use of the Windows Firewall service. Then, that I try to start this service, and he said: "Windows has no start the engine service of filtering based on Local computer." Error 0 x 80320009: an object with this GUID or LUID already exists. »
  Still, I can't find a way to fix the problem. In addition, the service is set to automatic.
  So if someone could help me, give me ideas or tell me how to solve the problem, it would be greatly appreciated. Thanks in advance.
  P. S. sometimes, when I type things in the command prompt, I get a message saying that "the requested operation requires a rise." What it means
  ?
  EDIT:
  The base filtering engine
  IKE and AuthIPsec Keying Modules

  Internet Connection Sharing (ICS)

  IPsec policy agent

  Routing and remote access

  Windows event collector

  Windows Firewall

  All of these services don't work, with each saying "Windows did not start the * service * service on Local computer.; Error 1068: The dependency service or group could start. ", with the exception of the Base Filtering Engine service.

  EDIT:

  I believe that the motor of filter of Bae is the root cause of the problem, because when I try to start it, it says "Windows cannot start the engine service of filtering based on Local computer. Error 0 x 80320009: an object with this GUID or LUID already exists. ", so that all the other programs on this service, said depedent" Windows did not start the * service * service on Local computer. " ; Error 1068: The dependency service or group could start. ».

  EDIT:

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

  Hello everyone, I solved the problem. The problem is a corrupted, file called "secdrv.sys. To resolve this problem, I had to first download the file "secdrv.sys' out of my operating system CD. To do this, you must create a partition and "mount" a file on CD, on the newly created partition. The file you have to climb is and is called: "*: \sources\install.wim. Extending .wim means a "file system Windows Image" and to see what files it contains, you will need to download what we call the "Windows Automated Installation Kit". Explicit instructions on the installation procedure and where to get this program, is here: "http://www.vistax64.com/tutorials/86959-access-vista-install-dvd-files.html". Once you have the file mounted, just search the area mounted for "secdrv.sys", then copy and paste it in "C:\Windows\System32\drivers" or that where the drivers from your system. After that, restart and the BFE service and all of its dependencies should work properly. Thanks for the good help like SpiritX.

• Could not start the Windows Security Center service.

  Could not start the Windows Security Center service. Tried to go to Services, but this message. Help me please!

  the error code says...

  one or more ActiveX controls could not be displayed because that is:

  1. your current prohibiti of security settings on this page activex controls running or,

  2. you have blocked an editor of one of the controls.

  Hello

  ·        Since when are you facing this problem?

  ·        Remember to make changes to the system?

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registry

  I suggest you follow the steps mentioned below.

  a. click on Start menu and type regedit.exe in the start search box and press ENTER.

  b. navigate to the following location. You must remove 1 (parasite) of additional area

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Internet Settings\Zones\
  with number Pseudo-graphique, you will see before the number of zone 0.

  c. check to see if the problem is resolved;

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows ICS Services stopped & could not start the windows firewall in windows xp professional sp2.

  I am facing a problem regarding the ICS Service & could not start windows in windows Xp service pack 2 firewall, whenever I have install windows Xp Sp2 and join the network, the ics services ceased and the windows firewall. While windows firewall service starts when I restart my computer. But after some time stopped again had services that I'm cold does not access the readers of part, could not access network resources.this problem occurs only on windows xp sp2, when I install windows 7, then all better.i work fetch on different forums, apply the settings but I'm not able to solve the problem on base all the time. Someone tell me the permanent solution of this problem, on a forum, I see this solution,sharedaccess.reg and settings.but I am still unable to find a permanent solution.

  Someone tell me the permanent solution of this problem?
  
  
  
  

  Hello

  Here are a few troubleshooting steps that you can try to solve this problem. See the following links.

  You cannot start the Windows Firewall service in Windows XP SP2

  http://support.Microsoft.com/kb/920074

  Registry WARNING: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, see this link:

  http://support.Microsoft.com/kb/322756

  Troubleshooting settings of Windows Firewall in Windows XP Service Pack 2 for advanced users

  http://support.Microsoft.com/kb/875357

  If you have additional problems, please reply to this post and we will be happy to help you further.

• Could not start vista windows firewall

  When you try to start the services program through windows firewall I get this error message: windows could not start the service on the local computer's windows firewall.
  Error 1068: the dependency service or group could start.  I need help...

  In addition to that maverick said... Follow the steps below...

  1. run "netsh winsock reset " starting from an elevated command prompt and reboot...

  2. go to the again elevated command prompt, and then run 'netsh firewall set opmode enable' in the command window... that should do the trick...
  Best regards, H.M. KOWSHAL a.k.a W@R10CK

• Windows could not start the windows on the Local computer firewall

  Original title: I don't have the first response says.then the following error code came.
  Windows could not start the ICF on local Computer.For more information, review the system event Log.If this is a service not microsoft, the supplier of service relationship and refer to the specific service 5 error code

  Hello

  Thanks for posting the request in the Microsoft community forums.
  The problem description, I understand that you receive the error "Windows has no start the firewall windows on the Local computer. To resolve this problem, please answer the questions.

  1. what anti-virus software is installed on the computer?
  2. do you have a third party security/firewall on the computer?

  If Yes, then you may not be able to start Windows Firewall, since you have a 3rd group of firewall installed.

  Even if you can re-enable the Windows Firewall, you can not run two firewalls at the same time.

  Try the troubleshooting suggestions provided to start the Windows Firewall.

  Method 1:

  Run the fix it from the link to the problems of the Windows Firewall Service and check.

  Diagnose and automatically fix problems of Windows Firewall service

  http://support.Microsoft.com/mats/windows_firewall_diagnostic/en-us

  Method 2:
  You can check the service for the Service of Windows Firewall if it is started or not.

  a. Click Start.

  b. in the start search box, type Services.

  c. click right on - run as admin.

  Check if the below mentioned services has mentioned State and type start.

  Firewall Windows started Automatic\Manual.

  base filtering engine Automatic\Manual has begun.

  driver authorization Windows Firewall started Automatic\Manual.

  Also check the dependency services that are required for the execution of the Service Windows Firewall.

  Method 3:
  You can scan System File Checker to fix corrupted files.
  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  Method 4:
  If the problem persists then, try the steps from the link.
  Some services do not start in Windows Vista and Windows 7

  http://support.Microsoft.com/kb/943996

  Registry warning: Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/ )

  How to back up and restore the registry in Windows

  Hope the information is useful. If you need help with the Windows Firewall, feel free to post you question in the forum. We will be happy to help you.

• Could not start service windows drivers Foundation-User-Mode Driver Framework on the local computer, error 31: a DVICE attached to the system does not work

  When I go to start the Service for Windows drivers Foundation I get the following error message, cannot start service window drivers Foundation-User-Mode Driver Framework on local computer, error 31: a device attached to the system is not functioning

  I was not able to find an answer in help

  Unless you write your own drivers for XP and using the Windows Driver Foundation Service to help you debug, you can disable the WDF Service.  It will be one less point to start your system and will not not just sitting there working day and night with nothing to do.

  On some systems, if WDF is activated, you can begin to see some errors of svchost.exe like this:

  Application error: the instruction at "0x7c91b21a" referenced memory at "0x00000010". Memory could not be "written".

  The best solution for this problem is: disable the WDF Service.

• Could not start after Windows 7 Pro update, am I crazy?

  I am now on my fourth try, and I'm about to lose my patience.

  I bought a T400 6475-B14 with Vista 32 bit.  I bought a copy of the Windows 7 Professional upgrade.  I install 64-bit disk.  Currently the machine has 2 GB of ram, but I ordered 4 GB (2x2gb) RAM from Lenovo and it should be here in a few days.  In addition, since the machine is still under warranty, Lenovo sent me the restore disks (I think that's what we call them) and they should be here in a few more days.

  On my three previous attempts, I update the OS and everything seems fine.  However when I go to the website of Lenovo, it cannot detect my system.  This seems a little weird, but I can deal with it.  I put in all of the info from the machine and download the Toolbox.  Once I did it tells me to download the update of the system, but for some reason he sent me the link for Vista/XP.  I then manually find the Updater, Win 7 64 bit system, download and install and it detects and installs the PowerManager, connections and repair, etc.

  I do not seem to have any problems until I stopped the machine.  When I go to restart, the machine hangs at logo 4 color of Microsoft.  After a few minutes (5-10), it gives me the opportunity to try to restore to an earlier point and fix the machine.  But every time he tells me that the system is unable to repair itself.  I then reboot and press F11 at the THINKPAD screen and restore to an earlier version.

  Last night, after two previous restorations could not give me a stable machine, I completely reinstalled the operating system.  Well, everything seems to work again.  However, this time I rebooted after each update, to see where is the problem perhaps.

  I had downloaded information update system with the exception of the R & R and C++.  I installed C++, but it does not require a reboot.  I think that installed the R R &, installed and then rebooted the machine.

  Then the same thing happened again!

  I went into diagnostic tests and it came the following:

  Root cause found:

  ---------------------------------

  A recent driver installation or upgrade may prevent the system from starting.

  Repair action: System Restore

  Result: failed.  Error code = 0x1f

  Repair action: System filed the integrity check and repair

  Result: failed.  Error code = 0 x 490

  Time taken = 945178ms

  I'm going to re - install Windows 7 again, but this is starting to really drive me crazy (granted, it is a short route, but still!).

  Can someone help me understand what I am doing wrong?  I'm not trying to do something crazy and I'm just following the instructions to the letter but I do always get my system works!

  Any help would be greatly appreciated.

  See you soon,.

  GBA

  Hello

  Do you (try to) exactly what I did when I punted Vista (good riddance!) and upgraded to Win 7 Pro 64 on my T400.  I don't see anything obvious you do bad.  Here's what I did:

  Installed Windows 7 upgrade as a clean install. Then started to update Windows.  Then installed ThinkVantage System Update for Win 7and let him do his thing, no problem.

  Is that what you have installed the update?

  Z.

• Could not start service Windows Security Center - I also have an error 1075

  I tried running Security Center, got the cannot be started message.  A ran 'services' in the start search bar, right click and tried to open the Security Center and received the error message 1075.

  Hello

  What is the antivirus installed on the computer program?

  Method 1:

  To make sure that the computer is clean of infections, scan your computer for viruses.

  www.Microsoft.com/Security/Scanner

  Note: If infections are detected during the scan, there is a risk of data loss because infected files will be deleted.

  Method 2:

  Perform a SFC scan on your computer. Consult the following link:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7

  http://support.Microsoft.com/kb/929833

  Method 3:

  You can try the following steps and check if it helps.

  a. Click Start > type 'run '.

  b. in the command "Run" type "services.msc".

  c. then click right properties Windows Management Instrumentation service.

  d. ensure that all the dependency services are started and then try to start the Windows Management Instrumentation service.

  I hope this helps.

• "WindowsUpdate_80070641" "WindowsUpdate_dt000"_"WindowsUpdate_00000641" "WindowsUpdate_dt000" __Windows could not start the Windows Installer service on computer local error 216:0xd8

  I have a 64 bit Windows 7 PC and cannot install updates.  Here are two screenshots.

  One contains two error message that I get when trying to update

  "WindowsUpdate_80070641" "WindowsUpdate_dt000"
  "WindowsUpdate_00000641" "WindowsUpdate_dt000"

  The second erorr is what I get when you try to start the Windows Installer Service.

  Windows cannot start the Windows Installer service on computer local error 216:0xd8

  I follow several steps that are listed in the web pages of solving problems.  Tried to make own reboots, use the Microsoft Fix and it does not detect any problems.  I tried to install Windows Installer 4.5 and I get a message telling me that this update is not applicable to your computer

  Please notify

  See if this ad helps-

  http://social.answers.Microsoft.com/forums/en-us/vistawu/thread/213770d0-e94b-43B4-9ff6-99e6366b556b

  TaurArian [MVP] 2005-2011. The information has been provided * being * with no guarantee or warranty.

• Error - windows search on the local computer started and then stopped. Could not start the Windows Search service.

  Original title: windows search service does not start.

  When I try to start the service "windows search" I get the following error "windows search on local computer started and then stopped. Some services stop automatically if they have no work to do, for example, the services of newspapers and performance alerts' I tried manually and nothing, can someone help me please.
  It is a XP machine and yes I have windows search 4.0. I need help to get that windows search service has restarted.

  I no longer need it, I just backed up all my files and re - install windows XP.

• Could not start the Windows Firewall

  De :  Johan

  Hello

  My firewall gives me this error message when I try to put it on.

  "Windows cannot start the Windows Firewall service.

  I just installed SP1, but the problem started before that.

  De :  GTS

   

  Try running this command at a netsh winsock reset command prompt

  Restart, and then try to turn on the firewall.  Recently, it has worked for me during the interview of a machine of customers with the same problem.

  Another response of the community of Windows Vista discussion groups

• Could not start the windows 0 x 80070003 firewall

  Hello

  I have a problem with my windows 7. If I try to activate the control panel Windows Firewall, it gives me the error: "firewall Windows cannot change some of your settings. Error code 0 x 80070003 ". I tried many things, I have no malware or viruses. If I try to boot from "services.msc", the error I get is: "Windows does not have start the Windows Firewall service on the local computer." Error 3: the system does not have the specified path. »
  Thank you and hope you can help me
  Hello
  Follow these instructions to fix the Windows Firewall:
  Download and install Windows Repair:
  http://MajorGeeks.com/tweaking.com_-_Windows_Repair_d7141.html
  When the repair of Windows opens, click on the tab to start repairs, click Start. Uncheck all boxes except for the following:
  -Reset the registry permissions
  -Reset the permissions of files
  -WMI repair
  -Repair Windows Firewall
  Then click Start. Once it is finished, restart your computer. Let me know if this helps you.
  Brian