First CS5 + images 7 d + = my computer cannot return (!)

Similar Questions

• When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036

  Error image system original title: windows 7 0 x 81000036

  I'm doing a backup system image.  When I select this option I get the dialog box 'Create image s system' but it cannot find any 'backup devices on this computer"and lists the error 0 x 81000036.

  I have an ESATA connection on my Dell laptop I was trying to make the image on.  I use the unit every day to save files and which works very well.  He just leaves me CCADE with the system image backup...

  any ideas?

  Hello

  ·         You have created a system image backup before that?

  ·         You did it changes on your computer?

  ·         Is your esata formatted NTFS drive?

  Try to save the image of the boot system: http://support.microsoft.com/kb/929135

  Note: make sure that you start the computer in normal mode after a repair.

  See also the linkfor more information about the backup: http://windows.microsoft.com/en-US/windows7/Back-up-your-programs-system-settings-and-files

• I have CS5.1 on a single computer and I would like to install the new computer (by download) that I have to disable the original program first?

  I have CS5.1 on a single computer and I would like to install the new computer (by download) that I have to disable the original program first?

  You are allowed to have facilities of acrivated twop is not necessary that you clear the first, even if you can, if you wish to have available additional activation.

• I try to install CS5.5 on a new computer and it says my product key is valid but cannot find a product calling.

  I have Adobe CS 5.5 with a valid product key (on the original box), but it will not install on my new work computer. This product is the property of my company and has been used in the past on my old computer.

  I enter the product key and get the customary green check mark:

  [image removed by Moderator]

  I click on 'Next' and display the screen below. I have not all CS 5.5 programs installed on this computer. (It's brand new - opened and set up this morning)

  I used this drive to install CS5.5 on my old computer which broke down and had no need to improve anything. I don't have any other product keys to be used for the second box and I found nothing about this problem in the forums.

  

  Any help is appreciated, I'm at a loss.

  You have no need to install CS4, but if it is he who in that you upgraded, you must select it in the drop-down menu that appears in this screenshot, and then you will need to enter the serial number CS4 after that.

• Problems with video capture in Final cut pro verses first CS5

  The codec used in the capture of a video of the PCF, I cannot import the FCP in first CS5. Video I get clients who capture video in FCP and then send it to me. Is there a different capture format, they can use or y at - it a codec that is available that does not cost a fortune, working first for windows?

  Yes, I am intimately familiar with P2 and edit in Premiere Pro - I have done so for four years. You don't need drivers for P2 unless you are actually mount the card P2 or the camera to your computer. Premiere Pro will edit the images natively without any additional installation. The applies to all formats that can be recorded to P2, including DV, DVCPRO, DVCPRO 50, DVCPRO HD, and AVC-Intra. If someone offers you a complete workout of the P2 files (folder structure) and you can import and edit all these without additional work around.

• File audio h.264 out of sync. First CS5.5

  After building a new machine with first CS5.5, using the Q4000 NVIDIA card, I have trouble opening my audio are out of sync. I export sequences DSLR the same sequence was already good export on my old computer. Now, when I export, the sound is out of sync a few images. There is something really funny going on. When I play the same video file in Windows media player, it seems to be in harmony. When I play it in Quicktime, it is clearly out of step. Also, when I upload to Vimeo, it is out of sync as well.

  If you want to see my computer's specifications, you will find them in this post:

  http://forums.Adobe.com/message/4211881#4211881

  When I export the same file in Mpeg DVD, it seems in sync. Is - this problem anyone familiar?

  See the raw images to compare sound.

  Refer to your sequence to make sure that you don't to not push the audio out of sync at all.

  Remove the media cache in the project and leave the first re - conform to the audio.

  View the full source, sequence and export of settings.

• First CS5 - system reading HDV freezes/crashes!

  Hi all

  Despite the immense anger and frustration that accumulates in these moments there, I will try as hard as possible to stick to the facts here:

  First CS5 is completely unusable since I bought it 6 weeks ago.  It runs on a new Windows 7 Home Premium 64-bit system.   He can't handle the HDV playback and blocks the machine at random intervals during play, normally within a few seconds.  Sometimes the 'crash' means that the video freezes for and audio continues to play.  Sometimes, the accident blocks the whole machine or even forces an immediate re-boot.  First seems to behave as if it is running on an old and slow system that cannot follow.  I cannot perform a single Edition on my calendar because of the crash problem.

  I support box to open with Adobe, but they seem to have no idea how fix the problem and continue round in circles (they tried to dismiss the case 3 times more!).  I called Sunny, Sundeep, Riaz, Deepak and the supervisor, Avinash.  I have also contacted technical sales engineer Steve Burnard (to the BVE, Earls Court), but have so far been ignored, despite its promises to help.  I have been working through a comprehensive list of maintenance, but made no progress.  It goes without saying really, but my business suffers bigtime.

  My system spec is as follows: Asus P7P7P55-M, Intel Core i7 870, Coolermaster Hyper TX3, 8 gb Corsair DDR3 1600 mhz CL9 DHX (4 x 2 GB modules), NVidia GeForce GTX 460 1 GB, 700w EZCool Tornado PSU, Western Digital FW800 Raid Array, Matrox Triplehead2go (now disconnected from paternalism).  The machine is NOT overclockee, and I have no antivirus software or other programs on the system: it is a dedicated video editing system.

  I'm under first CS5 version 5.0.3 (all updates installed).  My NVidia drivers are up-to-date (266.58 version). My images are HDV 1080i for a Canon XLH1a (PAL).

  Here is a summary of the main things I've tried.  None of these steps has made a clear difference:

  • Changed "rendering optimizes memory/performance."
  • Tinkered with memory allocation settings
  • Cache cleared
  • Lowered playback quality
  • Captured or imported new film HDV (same camera)
  • Re-capture the images of 'problem' (same camera)
  • Film imported from another machine (work). These images editing / playing perfectly in CS3 on the old machine and was captured on the same device
  • Footage moved to another (fast) drive hard internal
  • Other drivers and BIOS updated
  • Entry memory timings/tension manually instead of using the parameters of the BIOS 'Auto '.
  • TH2go disconnected and uninstalled Matrox Powerdesk
  • Updated day/re-installed video card drivers (clean install)
  • First uninstalled and then reinstalled updates one at a time (the last 5.0.3)
  • Run memtest86 with only a WHAT DIMM installed in time - no error reported
  • Run Prime95 Torture test for 4.5 hours with no error reported
  • Tried to import Quicktime HD DVD 'Company of images' files (won't import)

  Main findings:

  Images that hangs at first CS5 plays back fine in Windows Media Player on the same machine at full resolution.

  The images which blocks the first time and publishes fine on an old machine running Premiere CS3.

  Capture the scene does not work properly - it cuts off after a few minutes. Bands must therefore be captured in their entirety, meaning file sizes are large.

  AVI files seem to play back fine so far (could it be related to higher compression formats?)

  My apologies for the length of this post.  It is a complex problem and long term, and so far no 'professionals' from Adobe showed a real willingness to help.  Adobe support have suggested so far only the basics.  They are extremely reluctant to you allow to talk to their support higher level officers and seem to basically just script-readers.  If a suggestion does not work, they seem to have no idea of what to try next (until they ' talking to their superiors'!).

  They recorded a session with me and are apparently still discuss the results: honestly, I'm not sure I believe them.  Four weeks have passed now.   According to me, that I really need someone to try to resolve the conflict of machine/first on hardware software.  I could be wrong, but given all of my testing so far this seems to be caused by a conflict between the first and something on my machine... .but what?  I don't see any sign of a faulty hardware.

  All the advice in the wake of any listed above would be appreciated.  Thanks in advance.

  Paul

  Power supplies - what!

  I would like to say to NewEggs on sides of the user as a good starting point to help with your selection. I like also jonnyGuru.com be able to provide comments. they looked at a lot of different p / s

  About power, do not put too much weight in this alone. I have an old Thermaltake Toughpower 675 watts p/s which is so solid, but there are sellers of 1000 and 1200 models of watt that I wouldn't trust in my system for a second. I think you should at least 650 watt rated p/w with a renowned manufacturer.

  Things that I find important:

  -more large power units tend to be much quieter with excess capacity and more fans (I got the AX1200 gold Corsair and LOVE)

  -models of modular cables may provide much cleaner cases

  -variable speed fans

• Satellite L300 - 16L: bootmgr image is corrupt. the system cannot start

  Bootmgr image is corrupt. the system cannot start

  Why is this?

  Have we lost all files etc on the laptop?

  Its a Toshiba L300 - 16L 'versatile Base '.

  Any help would be great - thanks

  Wayne

  Well, the system on the HARD drive seems to be corrupted.
  Who knows why, but it happens sometimes, it s nothing unusual and, therefore, it s always recommended to backup the data always

  The files are not lost, but you are not able to start the unit.

  What you can do?
  Well, you can grab the laptop again.
  By using the HARD drive recovery option (press F8, repair my computer, drive HARD recovery) or by using the recovery disk

  But this will format the HARD drive and you will lose data.
  If you want to get access to the data, I recommend booting of live CD WinPE and BartPE.

  Google for more details...

• I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  I stopped to receive mail after December 31.  It indicates that the computer cannot connect to my account but when I log in with my password I get the message "this account already exists." How can I get my email account to work again?

  MacBook Air, OS X El Capitan

  First of all, make sure that you don't have two accounts with the same address. What happens if one of them is an iCloud account.

  From the Mail menu bar, you select

  ▹ Connection Doctor window

  In the window that opens, look for an SMTP (outgoing mail) account with a name that corresponds to the account that you are trying to add. Double-click it. Another window opens, displaying the list of all outgoing mail accounts. Click the sign button less to remove the corresponding one, and then click OK.

  Try to add the email account again. If you still can not, log off or restart the computer, and then open the preferences window accounts Internet and check if the account is displayed.

• Scan of the computer cannot be activated.

  HP Photosmart Pro N911a 8600

  OS X 10.8.3

  I'm unable to scan from the printer on my Mac.  The Mac does not appear on the list of available devices ' scan to ' on the printer (although my other Windows computers do).  Enable the computer to the printer utility analysis does not work.  I get the error Scan of the computer cannot be activated ~ unable to communicate with the device.  I uninstalled and reinstalled all the software and drivers for the printer.  I have also tried to enable sharing on the Mac, but still does not work.  I can do EVERYTHING else very well including the analysis of computer to the printer.

  Hello

  Please go to System Preferences > sharing.

  Ensure that the computer name field is set and include only English characters...

  Otherwise, click on modify and change accordingly.

  Now, restart your Mac and check differences while allowing the Scan of the computer.

  If the same persists, click on the Apple icon, install any available software update and see if that can help you.

  If there is still no try to change reset the printing system, then reconfigure the device by following the HP Installation Wizard (under Applications > Hewlett-Packard > utility device) and look for any change.

  If there is still no change, remove the software by following the HP uninstaller program.

  Then go to computer Finder > Macintosh HD > library > printers and move the HP folder to the trash.

  Open the PPDs > contents > resources. You can search the 8600 folder and remove its pilots in the trash.

  Fix permissions of the drive as follows to avoid any possible permissions problem:

  Hello
  Follow the steps below to repair disk permissions:
  
  1. open the Applications folder.
  2. go to the Utilities folder.
  3. double-click on disk utility.
  4 Select the hard disk that contains the boot volume.
  5. go to the first aid tab and select Repair disk permissions.
  Note: This process may take several minutes depending on the Mac and the amount of the permissions that need to be repaired. The progress log shows when the process was completed.

  Finally, reinstall the latest version of the software below by selecting the recommended HP software:

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=MP-107214-1&cc=us&DLC=en&LC=en&OS=4142&product=4323659&sw_lang=

  Shlomi

• My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

  My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

  and also installed the latest driver by using the Software Update Wizard software.

  That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

  The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

  I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

  If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

  Uninstall all software from Dell to control panel > Add / Remove programs

  Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

  Close all running applications (anything with an icon on the taskbar).

  Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

  After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

• computer cannot detect the scanner or camera

  When I plug in my digital camera Canon for my xp, then turn it on, I hear a small beep, then nothing. When I go into the Panel, printers and other equipment, scanners and cameras, I see 2 points. 1 is, WIA Canon MX310 SER. The 2nd one is Canon PowerShot SD1300IS. I then click on the Canon PowerShot SD1300IS and then get pictures, but nothing happens. The cameras screen display turns off, but that's all. It seems to be connected to the computer, but not to download pictures.

  When I keep trying I sometimes get an error message, the computer cannot detect the scanner or camera.

  How can I solve this problem and download my photos?

  Thank you Tim

  Hey volunteer J;

  Thanks for the help, but it did not help.

  I found the answer on page 2 of microsoft answers, xp, images and videos.

  6 questions down, how to re install microsoft scanner and Camera Wizard.

  It turns out that some tech volunteer known as J (is it you?} came across the solution to my problem on this site:http://www.veiled-chameleon.com/weblog/archives/000231.html )

  I have used PC Cleaner on this xp, and I think he may have disabled some of the registry keys. For me, I had to start my pitcher of DCOM Server, RPC, Remote procedure Call Locator process and put them on automatic. Once I rebooted, everything works great.

  I'm so happy that tech Volunteer J, done everything search last December. I bet it helped a ton out of veterans with our cameras. How did he find veiled Chameleon? Wow he must be smart enough.

  Thank you for volunteering j. (is it you?)

  Thank you Tim

• After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry.

  ORIGINAL TITLE: Vista problems

  Hi I was wondering if I can get a few hekp with this question. After installing Avast AV my computer cannot load Vista. HE continues to go to the Startup Repair, and it gives me an error of windows registry. I idid a debbug and had no errors on the disc. Safe mode does not work. I tried restore to earlier date and nothing, went to the command prompt and type chkdsk /F. c: here's what I got the chkdsk cannot run because the volume is in use by another process. CHKDSK may run if this volume is dismounted first. ALL OPEN GERE to this VOLUME WOULD then BE INVALID. And then he asks me if I want to force a disassembly. Press o and had. Windows check the file system and found no problem. The last line says failure to transfer the messages saved in the log of the events with the 50 State. It's all I have.

  Hello

  What is the exact error message related to the windows registry?

  I suggest you follow the steps mentioned below:

  Method 1:

  Remove all external factors with the exception of the keyboard and mouse.and restart the computer and check if the problem occurs.

  Method 2:

  Restart the computer in last known good configuration (LKGC) and check if the problem persists. Follow the steps in the link:

  http://Windows.Microsoft.com/en-us/Windows-Vista/using-last-known-good-configuration

  Method 3:

  If the previous step fails, follow the steps in the link:

  http://support.Microsoft.com/kb/927391

• Windows 7 RDP refuses the connection, this computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All computers on the domain work for RDP is only now a single computer.

  Error is the standard:

  This computer cannot connect to the remote computer. Try to connect again. If the problem persists...

  The error I get in Event Viewer is the layer of security event 56 TermmDD the Terminal Server has detected an error in the protocol stream and has disconnected the client.

  When I disable RDP and remove certificate from the Office is restarted remotely and then restart RDP I get one login before it fails again. It also shows only the download of the certificate on the first computer that connects to try and MOP in. If I try to another, it will not download the certificate.

  No matter if I try anyway to RDP with Windows XP, 7, Server 2003, 2008 r2 and I tried all RDP to see if it would at least somehwat work.

  All other computers on the work of field for RDP is only now a single computer.

  This post on the forum of MSFT Services Office to remotely help...

  http://social.technet.Microsoft.com/forums/en/winserverTS/threads

• When I use magic bullet in first cs5.5 it takes time to make

  Hello

  I have Dell laptop I7 16 GB intel hd graphics 4400 and I use in first cs5.5.

  When I edit the video and use the magical effect, he takes like 8-12 minutes to return shoots of 5 seconds.

  I can't really work with that.

  I know that my graphics card is not so good, but I suppose that the memory card and the processor is enough for video editing...

  I tried also to use in edius 7.5 and the same problem.

  I saw some videos on youtube and they explain to change the setting sequence at 640 X 480 and then when I export to return to full hd, but I guess that the video quality is also change.

  I really exhausted problem...

  Thank you.

  Some plugins like Magic Bullet are a lot of resources and the configuration of your computer is not powerful enough to cope better than that.