First elements 11 'installation Shared Technologies' error during installation

Similar Questions

• When I install first elements 13 I get the error message: DS003 what kan I do?

  When I install first elements 13 I get the error message: DS003 what kan I do?

  Please see the links below.

  • Errors ' Exit Code: 6, "" Exit Code: 7 "|"» CC, CS6, CS5.5
  • Adobe CS6: Exit Code: 7

  Hope this will help you.

  Kind regards

  Hervé Khare

• First elements 11 installation failure with the error on the shared technologies

  BEFORE the 11 installation with error failure "the installation process has encountered an error during the installation of the shared technologies. If please restart your system and try again"what is is to uninstall everything and I have to restart with the same error and we continue. So far the only way it works is to point the "error message" I run Task Manager and stop the installation program, I know it leaves the files that must be removed by the installer, but it worked. This information was acquired on one of the forums and it seems to work. Yesterday, it was the first time that I really used it fully, and even if I was able to create a project, I can't go out as a file (mi/gal), it starts out ok then throws an error and fails. As PREVIOUS 10 was still installed I imported the project (which surprised me) in PREVIOUS 10 and output as needed without error. This may be due to something being improperly installed or not installed in the PRE 11, I don't know. Can anyone help
  

  Dennis

  using Windows 8 Pro

  PS I downloaded the Adobe Support Advisor and no error
  

  See the following help document:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-installation-Photoshop-elements-premiere.html

• Photoshop Elements 12: shared technologies error

  Download purchased 12 Photoshop upgrade, stopped to Shared technologies. Tried the Adobe solutions, but do not understand.

  If you need someone to guide you through the solutions here (http://helpx.adobe.com/photoshop-elements/kb/troubleshoot-installation-photoshop-elements-premiere.html#main_Error__Below_mentioned_applicat ions_have_failed_to_install__Shared_technologies_), contact adobe support - http://www.adobe.com/support/chat/ivrchat.html

• Cannot install 12 elements of reatil CD get shared technology error!

  I tried to install the CD 12 items at retail. He moved almost to the end, and then stops with an error about the shared technologies. I tried all the diagnostics I found here that ASA found no errors. I couldn't locate any file of newspaper to inspect. Program uninstalls once ihas error has occurred.

  All of the suggestions.

  I stopped anti-virus programs.

  Tried to restart

  has run ASA

  manually searched a log file

  None of them worked.

  I tried to hard drive, same result. I tried chat tech support and after having downloaded a update app magager and deleting a directory, rebooted and tried agai. success.

  Thanks for your help, I enjoyed.

• Shared Technologies error

  I tried to install Photoshop Elements 10 for several hours now. I get the error "Shared technology could not be installed". Adobe support Advisor indicated that my problem can occur if a newer version of the Flash Player has been installed. After reading this that I uninstalled Flash, but it is not yet complete the installation. I'm quite frustrated.

  Hello

  Usually, a step that helps is to navigate to the folder shared technologies ElementsST1Installer (ST1 means Shared technologies 1) in the installation disc.

  If you have downloaded the software, you'll find it all in the extracted installation folder.

  First run the entire file in the folder Shared Technologies, and then reinstall the software.

  I hope this helps.

• Photoshop elements 12 and shared technologies

  I try to install Photoshop elements 12 on windows 7 and I get an error message: do not install shared technologies. Can help?

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-installation-Photoshop-elements-premiere.html#main_Error__Below_mentioned_applications_have_failed_to_install__Shared_tech nologies_

• First Elements 9 YouTube sign in ERROR

  First Elements 9 Troubleshooting - "the username and password you provided do not match. Please Try Again Later", this appears when I try to connect to youtube while trying to load a video. I've accessed youtube online to double check that my userername and the password are correct, and they are. I also updated the web sharing in PRE.

  S ' Please help, thank you!

  Until you can understand, you can always manually an output video and download it yourself. Many people prefer this method because it often gives you a much better video quality.

  http://forums.Adobe.com/thread/623549

• with Photoshop Elements 10 and first Elements 10 installation problem

  I bought a package Photoshop Elements 10 and first Elements 10.  It comes with 5 disks... When I install the first disc, it does not ask for the 2nd drive once the first drive is completed.  When one has been done hit the option of finishing and I did and that's all.  He did not make the next disc.  What should I do?

  Thank you

  Jim

  Hello

  Disc 1 contains the installer for 32-bit Windows.

  Disc 2 contains the installer for Windows 7 64-bit.

  Disc 3 contains the installer for mac OS.

  Disc 4 is the content of the disc for Windows Adobe Premiere Elements.

  Disc 5 is the content of the disc Adobe Premiere Elements for Mac OS.

  You can install from Disc1, 2 or 3 depending on the operating system running on your computer.

  Thank you

• First Elements 10, installation of content themes, titles etc.

  I'm under element first Adobe 10 and that you have installed the full content of the themes, titles etc.

  I now have several times just after a project has been loaded, received the message, that only a small set of themes of instant film, titles etc are available despite all of the content is installed.

  It does not matter what project I opened.

  Departure to reinstall all the content ends with the message to uninstall the version already installed.

  It seems that the InstallShield Wizard detects the already installed content, but first Element 10 does not work.

  I have uninstall the content and install it again, and it works for awhile.

  I use following content files:

  PremiereElements_10_Content_ALL_LS15.exe

  PremiereElements_10_Content_ALL_LS15.7z

  My system is:

  Acer Aspire 7745 G Notebook

  Processor: Intel core i5 2.4 GHz

  Memory: 4 GB

  Running packages Zonealarm extreme security

  It seems to happen randomly, I can't see any pattern in it.

  What can I do to ensure the first Elements 10 detects the installed content whenever I start the program?

  Joergen cordially

  To Nash_John,

  When I run the Setup by clicking PremiereElements_10_Content_ALL_LS15.exe the entire process ends with the acceptance of the license agreement and dialogue showing 6 different entries of content all marked to be installed. Everything is fine and I get no error. I have a license to first Elements 10.

  To Arvreton,

  Please answer in English. I do not understand frensh

• First Elements 8 Installation optimization?

  After a few years of use Adobe Elements '3', I decided to switch to '8' and I'm willing to install it now. I read a lot of information on the forums on various improvements and have learned much about the causes of my frustrations over the years.

  I'm also just starting to use (learn) photoshop CS2 (Yes... behind a little). I used some other photo editing programs and has recently decided to try Photoshop since I bought sometimes back.

  I will install on a machine that I dedicated exclusively to media and production editing. I wanted to have the opinion of experts from there to ensure that my installation is optimized before you start. Here are the specs of the system for the machine I want to use:

  Led Precision 690 Dual Core Xeon 5150 proc, 4 GB of SDRAM DDR2 memory at 667 MHz, nVidia Quadro FX 4500, 512 MB dual VGA or DVI graphics.

  Two hard drives, c: 250 GB SATA 3.0 Gb/s 7200 RPM w/8 MB DataBurst Cache and d: 500 GB SATA 3.0 Gb/s, 7200 RPM w/16 MB DataBurst Cache.

  C1 - All hard drives no RAID for 1 or 2 hard drives SATA. The operating system is Windows XP Pro - Serv. PK 2

  Currently the C: drive has 120 GB of space used and is has a few programs and a library of great music. D: drive is virtually empty with only 394 MB used.

  Currently my virtual memory settings are: size of the file C: 2046-4092 D: has nothing put? I'm not sure whether or not should?

  My goal would be to use what I have (hardware and software wise) currently and optimize the settings and installation for reliability and speed (if these two words can be used in the same sentence). What I can do before installing which could help overall I want to do now. Here are some of my questions:

  1. Should I install a first Elements 8 on the drive "C" or "D"?
  2. I all catches recorded and made made on the disk "D", because it is basically empty?
  3. From what I've read, the virtual for my system should be set at a maximum of 9092. Based on the 2 to 2.5 times the 4 GB of Ram. Is this correct?
  4. I leave the ' set the initial size to 2046.
  5. I should only ajdust these when I use this program and set them back in the case, or should I adjust them at the beginning and let them?
  6. I noticed that there is already an update for '8 '. I should download immediately or only if there is a problem?
  7. I install Photoshop CS2 on this machine at the same time. Y at - it no recommendation as to which one should be installed first?

  Any comments will be greatly appreciated. I'm ready to be installed with both programs in a box sitting in front of me. I've removed all versions earlier and all cleaned up, it is all nice and sweet.

  Thank you

  mharris56

  Overall, you seem to be in good shape. While you certainly want to XP to SP3 and access to Windows Update/Custom to ensure that you have even the non-critical updates. Also, make sure you have the latest version of Quicktime.

  1. Yes, you MUST install Premiere Elements on your C drive.

  2. use your D drive to store your project files and media. In fact, I recommend that, for each project, you open a new folder on the D drive to your project file. This is, among other things, keep your zero and make files in a place it need so that, when the time comes to remove the project from your computer, you can erase all files associated with the project while deleting the folder.

  Also check that your drive D is formatted NTFS and FAT32 not.

  As for the rest of your questions:

  I let the system set up virtual memory. There is no reason to put it manually on XP.

  You should have no problem installing both Photohsop CS2 and elements on the same computer programs.

  Finally, please refer to the right of this forum. The first several address issues and updates for first Elements 8.

• Cause green pixels in the clips "first elements.exe has stopped working error."

  I have a PAL - jvc everio camcorder. I copied the files from the camcorder to my computer. My computer is running Vista SP1 with 2 GB of ram.

  The files appear to be imported into PElements 4 However when playing or rendered clips I get an error first elements.exe adobe has stopped working.

  I noticed that the clips have green pixels appear at the place where the PE crashes.  All the clips seem to have this problem.

  I followed the suggestions of the basis of knowledge re: update codecs, disabling startup items, updated video driver.

  I don't have the cyberlink software provided with the jvc. I bought elements of first as I had read that he would be able to read jvc files.

  Someone at - it any other suggestions?

  See this thread... same camcorder... same problem. There are a few things to try:

  http://forums.Adobe.com/thread/389608?TSTART=0

• Internet connection sharing (6) error during installation of nintendo wifi connector

  "sharing the internet connection (6) error" appears when I try to install a nintendo wi - fi connector (to connect between my wii and computer for netflix). I have high speed dial-up (canada), but apparently can use wi - fi connector to talk about the wii. with the first installation, it worked well enough to allow the wii. but the wii could not connect to netflix.
  the first time I had hung it, I ended up uninstalling and now when I try to reinstall it, this error message appears.
  When I got the wi - fi connector connected the first time, I did it with my antiviirus running program: the help site suggested to uninstall then reinstall the wifi band program. so this time (after you have uninstalled it), I disabled the antivirus, but now get the error message.
  I have a call in nintendo, but fear that it is a problem of microsoft xp.

  I don't have personal experience with this, but the title claims that it fixes your exact problem: Guide to fixing ' error (6) Internet connection sharing

• First Elements 14 Installer fails to initialize

  So, I bought Photoshop elements 14 and first 14 elements in a store with the DVD, installed items without a problem.  I am trying to install the first 14 and get the error "Setup is unable to initialize.  I do not pay extra for this program just so that I can not install it.  I tried to install the DVD or download the program and I get the error so be it.  Help, please!  And no, I don't have the preview versions installed on my laptop.  I'm on Windows 8 if that helps.

  Candy

  start at the top and work your way down to apply applicable patches until your problem is solved.

  If (win) cc: https://helpx.adobe.com/creative-cloud/kb/creative-cloud-desktop-application-failed.html

  If your error is:

  "Setup failed to initialize. File not found. ' or 'could not initialize installation. This could be due to missing files.

  first of all, rename folder OOBE OOBE.old.

  to find the OOBE:

  Win 64 bit OS: Program Files x86\Common Files\Adobe\OOBE

  Win 32 bit OS: Program Files \Common Files\Adobe\OOBE

  Mac os: HD > library > application support of > adobe > caps

  Mac os: USER > library > application support of > adobe > OOB

  If it fails or isn't the exact error you see, uninstall, clean (http://www.adobe.com/support/contact/cscleanertool.html) and reinstall.

  If you use an installation dvd:

  Copy the contents of the drive in a desktop folder and install from this directory.

  If you are using a mac:

  1. try to create a new user account in Mac with administrator privileges.

  2. connect to the new user, navigate to Mac HD > Application > utilities > Adobe Installer folder, locate products such as Adobe Reader, Adobe Flash, Adobe Air and uninstall the

  3. navigate to the user library > Application Support > Adobe and Adobe put in the trash.

  4. navigate to Mac HD > library > Application Support > Adobe and Adobe put in the trash.

  5 restart the installation.

  If everything is applicable above fails, check your Setup logs:

  http://helpx.Adobe.com/Photoshop-elements/KB/troubleshoot-install-using-logs-elements.html

• First Elements 10 installation on Machine 64-bit Windows 7

  In the month of August, I bought the first 10 Elements (and PES 10 also) and install them on my existing Vista 32 bit computer.

  As of today, I replaced this computer with a much higher spec computer Windows 7 64 bit.  However, when I try to install PRE10 on the new computer, I am greeted with the error message that the installer does not support a 64 bit OS.  I install disc, I should load disk 2 if I should download the 64-bit version.

  I bought the download version and cannot find anywhere on the Adobe site to replace my 32-bit version with a 64-bit - but the reference to the 'disc 2' implies that my purchase either should have understood.

  Someone at - it ideas?  I wouldn't replace a piece of software only 3 months and a half old.

  FYI, the installed PSE10 first try without any problem.

  Thanks in advance,

  Bob

  Edited to add: just installed my copy of hearing CS6 as well without any problems - it seems only PRE10 which comes with an installer that does not work in 64-bit.

  Download the 64-bit PRE10 of Tools ProDesign

  

  See you soon,.
  --
  Neale
  Insanity is hereditary, get you your children