First Elements 12 slow

Similar Questions

• First elements 11 download

  I downloaded the first elements 11 trial version on my windows machine 7.  It downloads only 54 minutes and stops.  No error, no icon, no final installation. What should I try?

  Hi Mummssi,

  It seems to me that you are connected to a slow speed internet network else the download shouldn't take more than a few minutes.

  Try to connect to a network connection faster and download the files to a flash drive. Connect the flash drive to your computer and start the installation.

  You can try again, you can also download from direct download links available at: http://prodesigntools.com/photoshop-elements-11-direct-download-links-pse-premiere-pre.htm l

  But make sure you follow the steps mentioned on the page before you start the download.

• Question of fundamental change first Elements 7 for DV

  Hi all

  I have PE7, a quad-core Q6600 and Windows 7 64-bit.

  I captured about 6 hours of Standard definition a film DV 16:9 of the church ceremony.  Video was taken of an old Pana PV-GS320.

  The Church wants a dynamic video to be produced from the captured sequences (60 minutes more than in length).  I intend to do a lot of different effects including semi-transparent overlay video, picture in picture, inserting pictures and audio inputing the video of the ceremony.  The final product will be a standard definition DVD disc.

  I did some research about how the DV is interlaced and output to DVD must be interlaced (unless I am mistaken in this conclusion, let me know).  I also know that doing heavy editing with interlaced images (slowing/speeding up footage, zoom in and out, rotation, several overlay, etc.) may create flicker and "mouse teeth" in the video.  I also searched through these forums and continue to run in HD questions/solutions...  I guess I asking an old question that has probably been answered a long time ago when a DV tape ruled the world.

  QUESTION 1:

  So, if I may ask, in order to obtain the best results, prepare my raw images in PE7 before editing it by (1) deinterlace it? (2) exporting as progressive? (3) both? (4) leave it alone and start to change there? or (5) if I'm missing another option?

  QUESTION 2:

  Also, what the resolution would be preferable to import photos into the project?

  I know that the best way to work with any video must make as small as possible changes to it, but it's inevitable in my case.  No one wants to attend 6 hours of video...

  Thank you very much for reading my questions and I really hope that you have time to answer!  Thanks for any information!  I really appreciate it!

  -141rockwell

  Relax, rockwell. You do all this unnecessarily complicated.

  If you capture your video to DV - AVI via a FireWire connection, you will not get "mouse teeth" in your final product. The program is designed for working with interlaced video and create interlaced DVDs. The results should look almost as good as the original film. You can't damage video with "excessive change.

  Just trust the program to deal with technical issues. You can concentrate on editing.

  In regards to the photos you want to add, you will get the best results if they are not larger than 1000 x 750 pixels in size, by the frequently asked questions to the right of the forum.

  http://forums.Adobe.com/thread/431851?TSTART=30

  Meanwhile, if you are looking for help with the Basic program, be sure to check out my tutorials of basic 8-part training free of charge to the first Elements Muvipix.com support site.

  http://forums.Adobe.com/thread/537685?TSTART=0

• Burning issue with first Elements 9

  I made a cinematic slideshow in first Elements 9 and I wanted to then burn it to a DVD.  He reached 99%, then I got this message:

  .\Vobulator\BlockPlanner\BlockPlanner.cpp,line215

  The DVD is ejected without completing the burning process.  What should I do?

  The audio in the preview works perfectly with the menus. The video plays slowly and is a bit slow and sort of stalls, but the sound continues to play very well.

  Just to make sure I'm on the same page as you, here we are talking about video in the Menus, right? These would be animated Menus and have both a video "background" and also Audio.

  If that is correct, I have some questions and he has not seen the up-thread answers.

  What is the format/CODEC the video background Motion?

  Its duration is that of the Audio match perfectly? If this isn't the case, I would say that you do this either by editing the video file to match the Audio, or vice versa. I would keep this time< 30="" sec,="" but="">

  To make the animated Menus, it's my workflow:

  1. I have create a new sequence in PrPro, where you create a new project in pre.
  2. Import my video & Audio.
  3. Drag each to the timeline
  4. Change less than 30 s, as it should. Note: This is where I set my Audio levels and as for Menu music be ~-12 to-18 dB, but I put those in the ear, with only a glance to my meters. I don't like strong Menu Audio, because I believe it should be nothing else than background.
  5. Export/Share to the elementary streams, i.e. a DV - AVI file in one video and a PCM/WAV Audio file only to 16-bit 48 kHz. Note: I'm on a PC, so these exact REBS. are for the PC. On a Mac, one would choose MOV and probably a CODEC like Animation, but always make the elementary streams, the MOV has no Audio - it would be only the video stream.
  6. Then back in the draft, where I intend to use those, simply import and use for my Menu animated backgroun and Audio

  Not sure how this workflow will work for you, but it will eventually create Menus very similar to those of the library, even though Adobe may well have changed their video to something like MOV format, especially since the pre went X-platform with PrE 9. Again, the app creation with PrPro, Adobe went from WMV for video to M2v, from PrPro/Encore CS3, assets when PrPro/still go X-platform. Yet, on a PC, nothing works better than a DV - AVI video only that corresponds to the Menu (and the project, where the Menu is used) in both the pixel x pixel (proportions) dimensions and also in the (Pixel Aspect RATIO), which determines if a Standard 4:3 and widescreen, 16:9. If I still use it, where everything is done "by hand", the modules of this program are the same as those before, and I've never had problems.

  I found that if I feed creation program just what he wants and needs, and taking any supplement treatment charge out of it, things work better. Matter of fact, even though I do not always animated Menus, but always have music on them, I've never had a mistake for years. So far, things have always worked perfectly and hope they do for you also.

  Good luck and please keep us updated on your progress.

  Hunt

• First Elements 2 works more slowly on a better system?

  Hello

  
  

  I recently bought a new computer and gave my dad my old system. It is using first Elements 2 on its old system, which had 1gig of RAM and a very bad processor. He ran great but it was usable.

  
  

  So my question is, could help me or give me any information why 2 elements is incredibly slow and impossible to edit with a system with 4gig RAM and a dual core processor?

  
  

  Should I just upgraded him? If so, what version because I heard number 8 is very buggy at the moment.

  
  

  Any information would be great.

  
  

  Thank you.

  What operating system do you use?

  First Elements 2 is designed to run on Windows XP. It may not work well on Vista, not to mention Win 7.

  Perhaps you can find version 7 or even 4 available on Amazon.com or used on eBay. (Make sure that you buy a licensed copy, of course). Version 8 is much more stable in its version 8.01 patched - but it doesn't have its share of problems of resources, so you can avoid it during the upgrade.

• Quickly graduated from first Elements 8 - not suitable for HD - comments?

  After some more research today, I think having an idea about what is happening with my system running first Elements 8.

  First system Configuation is less than 3 weeks old:

  Windows 7-64 bit professional

  EVGA X 58 Classified MoBo

  CPU i7-950 (no OC'ed)

  12 GB Tri-channel RAM (1600)

  Graphics NVIDIA Quadro 1800

  500 GB logical drive 1 (including 2xOCZ SSD 256 GB SSD in RAID 0)

  600GB logical drive 2 (including 2xWD VelociRaptor 10KRPM drive HARD 300 GB in Raid 0)

  1.0 TB Physical Drive 3 for the backup of 1 & 2 (including 1 - WD 7200 RPM drive)

  I custom configured specifically to run the video processing and photo.  I worked with photos for years and just now to enter full HD 1920 x 1080 video with my Canon 5 d - M2 and new VIXIA HFS100 Cancorder.

  My bench is very fast and he's great in Photoshop CS4 managing several images of my Canon 5 d - M2.  Batch processing, resizing, etc. runs like a dream.  In Windows 7 preformance 'Performance index' the ranks of the 7.5 on CPU, System 7.5 on memory and 7.7 e/s disk off the ladder 7.9, the Nvidia Quadro 1800 only rated 6.7 which is disappointing (one else run this performance eval on their Vista or W7 machine?)  I would be interested to know your scores and what video card you are using) I can experiment with OC soon, but so far I have not seen the need.

  Being new montage video I wanted to start out slow and and not invest in a professional level of editing until I knew what would be my real needs, so I bought the Premiere Elements 8.0 to get said.  I also when in the course of training complete which is available on LYNDA.COM.  Which is great BTW!  Then to produce an HD video to 'professional' looking for a recent vacation to Napa Valley with images and photos from my Canon 5 dM 2.

  Elements 8 is a nice tool and offers lots of features, but just seemed to have throttled down after the creation of about 4 or 5 minutes of 1920 x 1080 video.  Moving around the timeline, the package would hit the disc each time for re - view the video "icon" clips on the timeline.  I found that after about 4 minutes of video on the timeline, whenever I added a new clip, I had to pause and wait for the system to calm down before editing it.  Also once things started to slow down, usually trying to move a clip around the scenario would result in a complete lock-up (just lost an hour of work).   I was also puzzled at why Elements 8 would hit the disc so much when I had 12 GB of RAM just sitting there with more than 7 GB unused.  It of sad because 8 elements has tools and features I want, just don't have the power.

  
  Well (stupid me) Elements 8 is still only a pack of 32-bit and not use any what RAM beyond 4 GB.  This is in itself explains a lot.  To really use my system to the maximum, I will need to upgrade to a 64-bit - professional level package NLE such as Premiere Pro CS4, Sony Vegas Pro 9 or other.  Now, back to the drawing board to reseach packets to determine what is best for my needs.

  Experiences with the 64-bit package?  Recommendations?

  Thank you
  Scott

  function() {return A.apply (null, [this] .concat ($A (arguments)))}

  After the first Elements 8 startup screen, I select new project, then the settings of my project as NTSC / AVCHD / Full HD 1080i 30.

  Ouch, which cannot be good. You use a preset interlaced, progressive video, and an AVCHD preset at that. I don't know exactly what PrE8 offers choices for your sequence, but you really want to use a preset ofp 30 fps in 1080. In the Premiere CS4 I use HDV 1080 p 30, then look and see if PrE8 has it, or you can create one if you have this flexibility in the elements.

• Adobe first elements causing 2 restart

  When I try to run Adobe first Elements 2 it causes my new A100-756 to restart, but it works very well on A110-276 my husband no idea why?

  Please check this thread on the very similar problem:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=20360&MessageID=74715

  It may be useful

• Move the cursor to data entry in the first element of array

  It seems that it should be simple, and that I still can't find a way to do this.

  I want to have a dialogue VI with a single Berry. When loading of the dialog, I want the data entry cursor to appear in the first element of the array, so the user can begin to enter data with the keyboard and I can't click on it with the mouse and then tab on the rest of the table. The property node 'Key Focus' just seems to give me a box around the entire table without any cursor active data entry.

  A table control has a property called array element. Get a reference to it and its main objective set to true. I just spent a few minutes test this and it didn't work for me if I first got the reference, then turn the key a second property node, rather than doing everything in one implicit property node. In addition, it still affects the update to the second element of the array, which is certainly not too useful. I have not found a way around that in my brief tests, unfortunately.

• Automatic indexing does not as soon as the first element of the array.

  Hello

  I have a state machine that uses automatic indexing in most of his State to write the registry to set the part for some test.  When the state machine reaches the section 'Now playing' (the fourth State, second battery sequence) I have a picture of two equal elements related to looping for to write the required registers for this specific test.  When I enter the current state read the the first address is the second element of the array which is '1' location and not the first address that must be '0 '.  I closed the program and restarted LabVIEW but I always get the second element in this loop that maintain the form part works correctly and I get an error because the first element turns on the chip.  Is there something I'm not see when it comes to self that he would keep from starting at the first element of indexing?  Please take a look and let me know what I can do wrong.  I have attached the main program and the print loop results screens and test probe.  Any help will be great.  It worked last week.

  I don't see no problem at all when I copy the loop in an another VI in order to run it. Your jpg shows nothing on the values of the probe.

• Studio 1735 and Adobe first Elements - error CODEC Audio IDT high definition

  Receive the error code in Adobe first Elements on my Studio 1735 trying to read the video capture.  Error is FFA-8-000 D; also says "failed to read.  The audio system does not appear to meet.  Maybe the card does not support full duplex mode.

  Any ideas or suggestions?  My sound card does not "full duplex"?  And if not, should I all options to update so it will be?

  Thank you.

  
  

• Using ListView with ArrayDataModel displays only the first element in each QVariantMap within the matrix

  I have this QML who have a ListView with datasource to a full ArrayDataModel from the CPP file for creationcompleted, I loop in the table to add the hour together to appear as a label on the page, what works. However, when I want to view these items in the list, it will display only the first element of the QVariantMap within the table, no error on the log of the device. Also, triggered more does not work, but when I click it, it will have a blue border surrounding it, but the onTriggered does not fire.

  Here is an excerpt of the CPP on the table fill

  This-> eventsModel = new ArrayDataModel();

  QVariantMap event;

  event ['EventName'] = "Event1";

  event ["EventHour"] = "00";

  event ["EventMinute"] = "01";

  event ["EventSecond"] = '02 ";

  QML-> setContextProperty ("eventsModel", it-> eventsModel);

  Here's the QML

  {Of container

  ID: eventListContainer

  {To ListView

  ID: eventList

  dataModel: eventsModel

  Use a ListItemComponent to customize the appearance of the list view

  listItemComponents:]

  {ListItemComponent}

  type: 'point '.

  {StandardListItem}

  Title: 'Event' + ListItemData.EventName;

  Description: "time:" + ListItemData.EventHour + ":" + ListItemData.EventMinute + ":" + ListItemData.EventSecond; "»

  }

  }

  ]

  onTriggered: {}

  var selectedEvent = dataModel.data (row);

  var eventDetailPage = eventDetailDefinition.createObject ();

  eventDetailPage.txtEventName.text = selectedEvent ['EventName'];

  eventDetailPage.pickEventTime.value = picker.dateFromTime(selectedEvent["EventHour"]+":"+selectedEvent["EventMinute"]+":"+selectedEvent["EventSecond"]);

  eventDetailPage.open ();

  }

  }

  Any help would be appreciated.

  Thank you.

  ListView determines ItemType of the element by calling the function itemType of the dataModel. By default, an ArrayDataModel returns an empty string for this call (see https://developer.blackberry.com/cascades/reference/bb__cascades__arraydatamodel.html).

  This leaves you with a few options:

  (1) If you have no header and all the elements are the same, you can make

  ListItemComponent {
       type: ""
       ...
  

  (2) If you have headers or different elements, you can extend ArrayDataModel and implement your own function of itemType

  (3) you can define a function of ItemType on your ListView in QML. Documentation:

  ListView called DataModel::itemType() for each item in order to know the type. QML, this can be overridden by declaring the itemType function (data, row) on the ListView element. ListView then call this function instead of the function DataModel.

  Here's how to create a list in QML which creates a header for all items on the high level and aStandardListItem for each item below the top level:

• First elements 13 edit 4 K video does [was: elements of management 13]

  Peuvent first elements 13 edit 4 K video?

  I use the first 13 items to edit video 4K from two different cameras from Panasonic.  It works a little more slowly than AVCHD to HD 1920x1080p60 video.  A project configuration is automatic.  Output can be anything, including 4 K.

  Bill

• Hi - I ordered a paid Photoshop Elements and first elements 14 yesterday (Switzerland - Swiss German). Order No. is Bestellnummer AD006601566CH. I got a download version which is designed only for Windows - but I need a version f

  Hi - I ordered a paid Photoshop Elements and first elements 14 yesterday (Switzerland - Swiss German). Order No. is Bestellnummer AD006601566CH. I got a download version that is designed for Windows - only, but I need a version for Mac! He said not what version I would get and that there are different versions before I made the transaction and payment. Where or whomshould I turn to?

  Please contact support and ask them a platform Exchange.

  Contact us | Adobe

• First Elements Page Download error!

  Try to download the 64-bit for Adobe Premiere elements 12 installation files of
  

  Download first Elements | 14, 13, 12, 11, 10

  I get this message

  Your connection is not secure

  The owner of trials3.adobe.com has incorrectly configured their web site. To protect your data against theft, Firefox has not connected to this web site.

  To learn more...

  Report errors that help Mozilla identify misconfigured sites

  trials3.Adobe.com uses an invalid security certificate.

  The certificate is valid for the following names:

  a248.e.Akamai.NET, *. akamaihd.NET, * .akamaihd - staging .net, *. akamaized.NET, * .akamaized - staging .net

  Error code: SSL_ERROR_BAD_CERT_DOMAIN

  

  Where can I get the files?

  Having the same problems. I also cleaned up the HOSTS file and that did not help.

  I found the download live here directory:

  Download Adobe Premiere Elements 14, 10, 11, 12, 13

• Pouvez first elements 13 open Prem 14 projects?

  Pouvez first elements 13 open Prem 14 projects?

  A friend and I would like to collaborate on a project.  It is 14 and I'm 13.

  A quick test gave an error when you try to open a project 14 13.

  Someone at - it a definitive answer?

  I realize that he probably could use 13 and one of my licenses... we rather do this.

  Certainly not.