First HP: after upgrade to premium, is is more connected to my computer

Similar Questions

• My logon user profile not working after a windows update, I can't connect to my computer.

  Last week I got an automatic update of windows on my computer (17 new). After that, I couldn't connect to my computer again. Loading the windows page, it shows two users icons profiles that were created and when I click on the profile of each user, it seems to start to run a function, but it does nothing. It just goes back to the same screen over and over again. I don't give myself the chance to write a password. I tried f8 system restore and system repaired without success. I have also run the comand line regedit and realized that the two user profiles are missing from here: [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList, what can I do now?

  Hi, thanks for your help

  I finally solved this by removing a windows update that was playing with the connection of the user profile service.

  Here is the link https://support.microsoft.com/en-us/kb/3097877

  see you soon

• Can I still use my first CS3 after upgrade to CS5.5

  As I do the learning curve, must I still the first CS3 pro key on my desk once I loaded premium CS5.5 of production of the whole drive?

  In addition to the use of first pro CS5.5, I would still change my prior projects in first CS3 a few times.          Thank you.    -john

  Yes, the programs co-exist and install in sepearte folders. Nothing is deleted or replaced.

  Mylenium

• After upgrading to vCenter 4.1 can connect to hosts only for 1 minute

  Hello, VMware gurus! Please help me to solve my problem. After the upgrade my vCenter and hosts ESXi 4.1 4.0 I always lose connection to my guests. After manual reconnect any host is available for 30 seconds and after that again once disconnected from the vCenter. I tried all the steps in the article "Diagnose an ESX Server that is disconnected or not responding in VirtualCenter" but without success. Could you give me an idea?

  Newspapers from attached host.

  Here are a couple of things which may help

  http://KB.VMware.com/kb/1011647

  http://KB.VMware.com/kb/1003409

• Skype does not work after upgrade. Gets error "Skype cannot connect.

  Hello

  I use Skype for a long time, a few days ago, I got an update from Skype, so I installed the upgrade. Since then when I log in, I get error "Skype cannot connect. Will you please reply back as soon as POSSIBLE because I need this very urgent application.

  Thank you best regards &,.

  Ravindra

  Hello

  I'm sorry, but you need to ask the Skype community for assistance on problems with Skype.

  "How can I contact Skype Customer Service?

  https://support.Skype.com/en/FAQ/FA1170/how-can-i-contact-Skype-customer-service

  See you soon.

• Why close and restart after 1 hour, while I am still connected to my computer?

  My computer restarts automatically after an hour and I lose and have to reconnect!  Help! Don't know what to do!  Have windows Vista Home premium. Never had this problem before, until now!

  Hello

  Check the Task Scheduler to see if you have anything put out there.

  http://www.Vistax64.com/tutorials/132903-Task-Scheduler-create-task.html

  ---------------------------------------------------------------------

  Could be linked to the heat, make sure that the computer has adequate ventilation, maybe use a small fan to
  Add air flow. On a PC, the cards, the memory and the cable (both ends) will need to be reinstalled.
  Remove all power and remove and replace those, don't do not just tight. Can't do that on a good laptop.
  Also check the power supply Plan of Advanced Options to make sure there aren't some parameters here that cause
  power off - Control Panel - Power Options.

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  ------------------------------

  Check with this utility, just in case there is a situation of blue screen.

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  accidents and displays the information about all crashes in one table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  ------------------------------

  Also do this so you can see the probable bluescreens. (You may or may not be able to see
  them if they occur even after doing this according to the cause.)

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  =========================================

  What antivirus/antispyware/security products do you have on the machine? Be one you have NEVER
  on this machine, including those you have uninstalled (they leave leftovers behind which can cause
  strange problems).

  ----------------------------------------------------

  Follow these steps:

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  ==========================================

  After the foregoing:

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes with nothing to do - then right-click
  Taskbar - the Task Manager process - take a look at stored by - Services - this is a quick way
  reference (if you have a small box at the bottom left - show for all users, then check that).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG then put a list of
  those here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out which files, key of registry and other objects processes have opened.
  What DLLs they have loaded and more. This exceptionally effective utility will show you even who has
  each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to start automatically when you start your system
  and you log in. Autoruns also shows you the full list of registry and file locations where applications can
  Configure auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  -Free - WhatsInStartUP this utility displays the list of all applications that are loaded automatically
  When Windows starts. For each request, the following information is displayed: Type of startup (registry/Startup folder), Command - Line String, the product name, Version of the file, the name of the company;
  Location in the registry or the file system and more. It allows you to easily disable or remove unwanted
  a program that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window
  Watcher says it all, reporting of any window created by running programs, if the window
  is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  ===========================================

  Vista and Windows 7 updated drivers love then here's how update the most important.

  This is my generic how updates of appropriate driver:

  This utility, it is easy see which versions are loaded:

  -Free - DriverView utility displays the list of all device drivers currently loaded on your system.
  For each driver in the list, additional useful information is displayed: load address of the driver,
  Description, version, product name, company that created the driver and more.
  http://www.NirSoft.NET/utils/DriverView.html

  For drivers, visit manufacturer of emergency system and of the manufacturer of the device that are the most common.
  Control Panel - device - Graphics Manager - note the brand and complete model
  your video card - double - tab of the driver - write version information. Now, click on update
  Driver (this can do nothing as MS is far behind the certification of drivers) - then right-click.
  Uninstall - REBOOT it will refresh the driver stack.

  Repeat this for network - card (NIC), Wifi network, sound, mouse, and keyboard if 3rd party
  with their own software and drivers and all other main drivers that you have.

  Now in the system manufacturer (Dell, HP, Toshiba as examples) site (in a restaurant), peripheral
  Site of the manufacturer (Realtek, Intel, Nvidia, ATI, for example) and get their latest versions. (Look for
  BIOS, Chipset and software updates on the site of the manufacturer of the system here.)

  Download - SAVE - go to where you put them - right click - RUN AD ADMIN - REBOOT after
  each installation.

  Always check in the Device Manager - drivers tab to be sure the version you actually install
  presents itself. This is because some restore drivers before the most recent is installed (sound card drivers
  in particular that) so to install a driver - reboot - check that it is installed and repeat as
  necessary.

  Repeat to the manufacturers - BTW in the DO NOT RUN THEIR SCANNER device - check
  manually by model.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  If you update the drivers manually, then it's a good idea to disable the facilities of driver under Windows
  Updates, that leaves about Windows updates but it will not install the drivers that will be generally
  older and cause problems. If updates offers a new driver and then HIDE it (right click on it), then
  get new manually if you wish.

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• On the start with progress bar page, after that it becomes a little more than half, the computer turns off.

  MY MacBook Pro is frozen and I had to turn off get out of the frozen page and when I pressed the button to turn it on it makes the departure noise and then the progress bar lights. When it becomes a little to Midway, the screen goes black and the computer turns off.

  The progress bar that starts from the left end appears when your startup disk is too damaged to mount. The illustrious progress is the functioning of the equivalent of disk utility (ERD). He is never more than half before taking a decision.

  If your drive CAN be mounted, start-up continues normally.

  If your drive cannot be mounted, your Mac stops, because there is nothing productive that it can do.

  If your Mac is trying to start and crashes, which can produce always different results, but that doesn't seem to be the case here.

  I recommend that you start in recovery and run utility disk (ERD) until it comes clean or is hopelessly.

• HP Pavilion p6210y: Office flashing after upgrade Windows 10

  I have a flashing desktop (goes black and office) after upgrade to Windows 10.  Once connected, it is fine for about 10-15 seconds, then it starts flashing. I couldn't do anything - click on anything except CTRL-ALT-DEL to go to the Task Manager.

  I did the upgrade 2 x already. Before my first attempt, I do nothing with my PC - I did not update the driver. When I arrived the office flashing after improvement, I panicked and immediately brought back to Windows 7. I was able to get to the window of recovery during the period of 10-15 seconds just after the connection. Fortunately, he returned to Windows 7.

  After the first test, I read a little about the similar problem and so I tried some of the proposed solutions - update the drivers on my PC, to disable reporting services Windows (all on 10 to win), to try to go to Safe Mode.

  So I tried again. I updated all the things I can to update (for most drivers) before the upgrade. Do you have PC Clean up. I had the office flashes again. It's the same thing. So while they are flashing, I tried to disable the windows reporting services that is very difficult to do with the Office of flashing. He did nothing clearly. So I went in Mode without failure. After starting in safe mode, I got the normal screen for about 5 seconds, but a blue window quickly flashed and then the desktop on Mode without failure just turned black, only the visible cursor.

  So, I rolled back to Windows 7 new.

  I don't have a lot of things/programs on my PC that I uninstall programs right away if I know that I will not use. I do scan of cleaning/Virus from PC on a regular basis.

  Information about my machine:

  HP Pavilion p6210y

  Windows 7 Home Premium, 64-bit

  Video card: NVIDIA GEForce 9100

  All the suggestions/help will be very appreciated.

  The only thing that solved the issue is reset my machine while keeping my personal files.

  I've never understood what really caused it.

  Thus, after the upgrade when the screen is flashing, I have reset the PC.

• Install previous versions first CC after CC 2015.3?

  Hey all,.

  Would like to know if you can reinstall the older versions of first CC after upgrade to 2015.3. The "install previous Versions" in Manager CC is not older versions of first listed. Is it possible to get these dos applications?

  Thank you!

  If you have a trial, you will need to install directly from prodesigntools.com

  Otherwise, just after the point 1/2 towards the bottom of the page is a portal showing how to install previous versions, https://helpx.adobe.com/creative-cloud/help/download-install-app.html

• Problems syncing notes app after upgrading to iOS 10

  Hi all

  I hear a lot of people having the same problem on the web.

  After upgrading my iPhone 6 s more and iPad Pro iPad 9.7 ", kept perfect notes that I saved in the Notes application (like my MBP / iMac too), while on my iPhone, I've known many sync problems and even lost notes and records.

  1. I tried to pass and on the synchronization of Notes in the iOS iCloud preferences, with a reboot between stocks. Nope. No synchronization, and when I turned on sync I lost almost all of the notes previously saved in my iPhone, so I now 15 notes instead of 175. This ONLY happens on my iPhone, while iPad / MBP / iMac yet.

  2 - I tried to create a new folder in my MBP or in my iMac, hoping to "stimulate" a new event to Resync through all my devices. Not for the iPhone, but synchronized on my iPad / MBP / iMac.

  3. today, I made a backup of my iPhone, reinstalled the iOS 10, then restored the backup.

  Nope.

  Any ideas, guys?

  Thank you

  Luca

  EDIT: actually sync problems seems to occur exclusively on the side of the iOS. This also includes the iPad. Fortunately, I didn't have the great idea to disable the synchronization of Notes in iCloud on my iPad, as I did on the iPhone.

  I'd lose certainly all currently stored notes in my iPad too.

• Apple Software Update will NOT work after upgrading to Windows 7

  Apple Software Update will NOT work after upgrading to Windows 7

  flyboy340 wrote:

  Apple Software Update will NOT work after upgrading to Windows 7

  More information is needed.

  Which machine you use, OS X are you running?

  Windows 7 running in BootCamp?

  The OS X app store is not present at all?

  AppStore is present but the update tab does not?

• Microphone does not work after upgrade from Vista Home Premium to Win 7 Home Basic-Sony Vaio VGN-NS25G

  Microphone does not work after upgrade from Vista Home Premium to win 7 Home Basic Edition. Laptop model Sony Vaio VGN-NS25G, bought in India

  My built-in mic not working anymore after the upgrade from Vista Home Premium to win 7 Home Basic Edition. Model laptop Sony Vaio VGN-NS25G was bought in India. I have taken the loacl Sony Service Center and they said that Windows 7 drivers for the microphone Sony was not yet available. They mentioned that the only way to fix the problem was to upgrade to Vista. Is this true? Where can I get these drivers for the microphone, and they are not available, when will they be available?

  Hello

  Method 1.
  Interestingly, I found the drivers for Windows 7 for this particular model of Vaio. Here is link thye:
  http://www.Sony-Asia.com/support/download/362654/product/VGN-ns25g/sectionfirst?subpage=detail

  I suggest updating all your drivers from the link above and drivers Realtek especially.

  Method 2. Set the default Microphone.

  Once the drivers installed to check if the microphone is the default value, here's how:

  Exercise the functions mentioned below to adjust the Microphone as default:
  1. Click Start and click on Control Panel.
  2. click on sound, then a new window will open.
  3. in the new windows, click on the 'Registration' tab and right click in the window and click Show disabled devices.
  4. now check if the Microphone is listed there and right-click on it and choose activate.
  5. turn highlighted that Microphone and click "set as default".
   
  For more information see the articles below:
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  http://Windows.Microsoft.com/en-us/Windows7/recording-audio-in-sound-recorder-frequently-asked-questions

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  First Pro CC crashes on startup after upgrading Windows 8.1. All solutions?

  It was working fine until I updated my operating system. I tried to reinstall the software. I tried to update my graphic drivers.

  Hi P.Ava,

  Please also try to delete / disable any antivirus or firewall software installed on the system.

  Please update if it works.

  Thank you

  Sandeep

• Activate Win 7 after anytime upgrade Home Premium to professional

  A couple of weeks ago, I bought a Samsung PC with Windows 7 Home Premium pre-installed PC world. At the same time, I also bought an Anytime Upgrade to Windows 7 Professional that I installed. When I click on computer/properties, which shows that I am running Windows 7 Professional. When I try to activate Windows using the product key that is specified in the properties of the computer it is rejected as invalid. When I change the product key that is indicated under the keyboard/back of PC is rejected it saying it will not work with this edition of Windows 7 - I have to either run the program installation of Windows 7, either enter a product key Windows 7 Professional. When I enter the Anytime Upgrade to professional product key it is rejected with code 0x8007000D (these data are incorrect).
  I've searched high and low. How can this problem be solved?
  Thank you

  Do a upgrade Express from Home Premium to professional would have required that you enter the product key Windows 7 Professional before. So, if you are running Windows 7 Professional now based on operating an Express upgrade, the license must already be enabled, or you can use the activation option, see the following:

  Activate Windows 7 on this computer:
  http://Windows.Microsoft.com/en-us/Windows7/activate-Windows-7-on-this-computer

  Basically no one no need to enter the key of product again.

  See the following on how to upgrade Express works:

  http://www.notebooks.com/2009/10/26/Windows-7-anytime-upgrade-%E2%80%93-unlocking-more-benefits/

• Qosmio F30: Multimedia keys does not work after upgrade Vista

  I upgraded my laptop Toshiba Qosmio F30 Edition Vista Home premium that I have received from microsoft.
  After the upgrade, the multimedia keys works not (first row) and also some of the shortcuts that is done by combining the Ctrl + keys to function (such as control + F1 to turn off the screen).

  After upgrading to Vista, I've updated all my device drivers with the second software DVD received with the upgrade to Vista.
  Also once again I've updated these drivers with final Toshiba drivers for Vista dated 04/25/07 on the internet. How to restore the functions of these multimedia keys and other keyboard shortcuts that does not work.

  I ask you: where you have downloaded the drivers and software tools?
  As I upgraded my machine, I had the same problem, so a user has me look on the Toshiba site and there I found some useful drivers.

  Maybe it helps, but I can't promise you.

  http://209.167.114.38/support/download/ln_byModel.asp

  Welcome them