My logon user profile not working after a windows update, I can't connect to my computer.

Similar Questions

• Windows Sidebar does not work after recent windows update

  Because windows update ran a few days ago my gadgets has not completely loaded, they were "snack" and had no functionality.  I tried tons of suggested corrections, but none works.

  System 32-bit vista Home premium, desktop pc with a quad core something or other.processor

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/929135

  NOTE: When you are finished troubleshooting, make sure that restore you the computer mode normal startup such as suggested in step 7 of the above article.

  Method 2:
  Try creating a new user account and check if it helps:
  http://Windows.Microsoft.com/en-us/Windows-Vista/create-a-user-account

  If it works fine in the new user account, then it is possible that your user account is corrupted.
  So, try following the steps in the link below and try to resolve the user account corrupted:
  http://Windows.Microsoft.com/en-us/Windows-Vista/fix-a-corrupted-user-profile

  It will be useful.

• Computer does not work after successful Windows Update.

  I guess this problem can adapt to category two so I posted in the places that I thought it was appropriate.

  So I use Windows XP Home Edition. I decided to be protected from viruses so I turn on the firewall and automatic updates from Microsoft. (It worked fine without automatic updates, but I just wanted to be sure). After the update was finished, I move to shut down the computer. Until the computer off, he asked me to "Turn off the computer with updates" or "Turn off the computer without up-to-date." I thought that the "update" one was the safe route so I clicked that. He will deliver to say update 1-61 do not shut down the computer, so I didn't. After that all 61 updates automatically disable the P.C.

  So now when I try to turn on computer of Paolo just turns off automatically after starting the screen. I didn't touch the PC since the automatic update from Microsoft. I tried to insert the family Windows XP Edition disc and the disc starts praying I can clean the system and restart costs. But to halfway through the computer returned to its ways to auto restart. Now I'm lost. I can not use the box nor can I boot from the disc to erase everything.

  I did nothing for the PC next to the "Microsoft automatic update via the control panel." I feel like I'm being deceived, because it was initially after the update I had problems.

  * I can't start in safe mode or any other mode also if you're wondering because the PC will automatically just restarts.*

  I guess I can record what happens if you really need a better explanation.

  See...

  Help: I got hacked. Now what should I do?
       http://TechNet.Microsoft.com/en-us/library/cc700813.aspx

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows Movie Maker does not work after installing Windows updates

  my film creator of windows XP home SP2 after obtaining updates (SP3 and others) does not work. How to fix this or how to get free a similar program for video editing?

  See if the following .dll file will help. The Windows Update agent, Wups2.dll file are perhaps not properly saved.

  Open a command prompt window (start-> all programs-> Accessories-> command prompt) and type the command:

  regsvr32 wups2.dll

  Let us know if that helps.

  Marilyn

• Links that use Javascript do not work after that I updated Java. can I go back to the previous version?

  I use the private messaging to communicate with my doctor. I always clicked on a link ('private messages') that opened a Java window (Javascript?) that displays messages and allowed me to write a message. A few days ago a message pops up saying that an update was available. I installed the update, now, this link does not work. It is very important that I be able to access these messages, making this urgent problem. If anyone has any suggestions, I would be very happy!

  (I wrote the Java check recommended on the Mozilla site, and it shows that Java is functional and up to date)

  You can try the basic steps like these in case of problems with web pages:

  Reload Web pages and ignore the cache to refresh potentially stale or corrupt.

  • Hold down the SHIFT key and click the Reload button
  • Press 'Ctrl + F5' or 'Ctrl + Shift + R' (Windows, Linux)
  • Press 'Command + shift + R' (Mac)

  Clear the cache and cookies from Web sites that cause problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > Cookies: "show the Cookies".

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/tools > Modules > Firefox uses the subject: Access Protocol built on: pages that you open through the bar of addresses as you open webpages.)

  • http://kb.mozillazine.org/About_protocol_links).
  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• TV - USB box does not work after installing windows update

  The President complied,

  I installed following updates on Apr. 18

  Meadia Leadtek-Streaming and broadcast-ubs devices 2860 devices.after that my Rolf failed to initialize usb tv box, it worked normally. Please help me.

  Now, I found the solution. If anybody face this problem, he could download this driver from following link

  http://home.eeti.com.tw/web20/eg/download.html After you run this usb tv box utv3 driver will run smothly.

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• His Dell Inspiron 1420, microphone and camera integrated into the laptop does not work after installing Windows 7 Professional

  No sound from my Dell Inspiron 1420 and the microphone and built-in laptop camera do not work after installing Windows 7 Professional 64-bit. My laptop has Windows 7 Vista 32 - bit family premium. My laptop is 64-bit capable and after going through the Upgrade Advisor, I installed Windows 7 64-bit. I can hear sounds when I use a headset plugged into the line-in Jack, but not through the speakers built into the laptop. I already tried new drivers from the Dell website, but I could not find.

  Any help will be much appreciated. Thank you.

  As it is has no drivers 64 bit Windows 7 on Dell Web site, your best chance is to install the 64-bit versions of Vista (if they exist) in compatibility mode, viz:

  Right click on the Vista driver, then select Properties > Compatibility tab. Now choose to run the program in Vista compatibility mode and then apply > OK. Right click on the file and select run as administrator to install it.

• VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7.

  I work in the field environment.
  Some VB 6 EXE compiled on the server (MS Server 2003) files does not work after restarting Windows 7 PC (shortcut to the server).
  but it runs on the Windows XP computer.
  For example:-Inventory.exe (work), Sales.exe (does not work)
  Help, please.

  Hello

  I suggest you to ask your question at the following link.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/

  I would also ask you to contact your IT Department for further explanations.

• NDAS services stopped and do not work after installing Windows 8

  Ladies and gentlemen,

  My Services of NDAS stopped and do not work after installing Windows 8. This is necessary to run my SUNGOO LAN hard drive.

  Does sb know what to do?

  Best regards, Rolf

  Hello

  If I understand correctly the NDAS (Network Direct Attached Storage) service has stopped working after the installation of Windows 8. Is this correct?

  Please provide additional information for a better understanding of the issue.

  1 are you faced with the question of the NDAS service on the computer having the hard disk SUNGOO?

  2. how many computers using the hard disk on LAN?

  Specify the computers with Windows 8.

  3 are the computers in a home group?

  Please post the information requested to receive specific troubleshooting steps.

  Other links

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/NDAs-error-wont-see-drive-after-Win7-install/a004b2a3-9dd4-48a1-9ce7-c289931ba17b

  Why Windows is not find my device?

  http://Windows.Microsoft.com/en-us/Windows-8/why-isn ' t-windows-conclusion-device

  I hope this helps.

• Qosmio G20-127: after that Windows update I can not see list fax and printer

  Description of the problem
  Model: Toshiba Qosmio G20-127
  Operating Sysytem: Microsoft Windows Media Center Edition

  After the restoration of BONE of restore DVD, I can see list Fax and printer. But after the Windows Update I can not see the list of fax and printer and cannot run the Wizard "add a printer".

  I just installed printers.

  It seems that it s a Microsoft Windows problem and it s not bound Toshiba laptops
  See this Microsoft Knowledge base article:
  http://support.Microsoft.com/kb/823447/

• HP Laserjet 2100 does not work after upgrade Windows 10

  HP Laserjet 2100 does not work after upgrade to Windows 10. Tried using PCL 5, PCL 6 and also tried the HP Universal print driver. I agree, this is an old printer, but I am disappointed told me "the printer is in error" when I try to print after this upgrade. Worked fine on Windows 7...

  Thank you!

  If the printer is connected using a parallel printer cable, please see the link below for the solution.

  http://h30434.www3.HP.com/T5/LaserJet-printing/possible-solution-to-LPT-port-issues-with-Windows-10-upgrade/TD-p/5372582

• Internet, printers, and other devices does not work after recent windows upgrade

  After a recent windows update automatic, I can't get online, print or use other network devices.  The unit of the internet connects very well and both Mozilla and Internet Explorer from fine, but cannot 'find' network.  The printer driver is installed, but the programs can not find the driver.

  Hello

  1. have you made changes on the computer recently?

  Method 1.
  If you use a connection please check the internet connection by cable if you face the same problem when working in mode safe mode with networking.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows Vista Advanced Boot Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to boot mode safe mode of Windows Vistsa with networking.
  e. when Windows starts, use check and Internet explore if the problem persists.

  For more information, see the articles below.

  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Troubleshooting in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshooting-problems-while-in-safe-mode

  If the problem exists not in Mode safe run mode startup minimum troubleshooting to find the root cause of the problem.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  Method 2.
  Also I would ask you to put all the drivers of material from the manufacturer's Web site and check.
  For more information, see the articles below.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Automatically get recommended drivers and updates for your hardware
  http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

  I hope this helps.

• Venue 11 7140 pro micro HDMI does not work after upgrade windows 10

  Has anyone tried connect a HDMI microphone on their place of dell 11 7140 pro after windows 10 upgrade? Mine does not work after the upgrade, but the HDMI from the dock works.

  I have thus display driver problems on 10 to win.

  For me, the micro HDMI port works fine. I use an active adapter, so that could make a difference.

  The HDMI on the dock works well, but only if I directly connect to an HDMI display. If I try to use a passive DVI adapter, then the external screen is not recognized. In addition, the DisplayPort on the wharf is also unnecessary, regardless of the type of cable or attached monitor.

  I encounter this problem after performing a new installation of Win 10, using the brand Dell drivers and latest drivers Intel installed by Windows update.

  It is certainly a driver problem Win 10 because everything works fine if I boot the Tablet under Linux using a USB key.

• My USB ports do not work after that I updated. I discovered that they were not working because my mouse no longer works

  My USB ports are not working after I upgraded to don't know what could have caused this and there is no fix auto feature that opens, I discovered that they were not working because my mouse no longer works HELP Please

  Original title: hardware device

  Hello Neale,

  Two things for you to try: http://support.microsoft.com/mats/Windows_USB_diagnostics and if that does not work, try this one: http://support.microsoft.com/mats/hardware_device_problems/ .

  Let me know if one of them might be your problem.

  Kind regards

  BearPup