Unable to connect to the SSID network which has the Double course using the command Netsh Wlan

Similar Questions

• What is the substitute in Windows XP for the command "netsh wlan set hostdenetwork mod = enable...". "in Windows 7?

  It seems that the command "netsh wlan set hostednetwork mod = enable...". "in widows 7 do not leave in windows xp. Is any other breed cannot as a substitute for the purpose of putting a wlan host in Windows XP?

  Hello

  The question you posted would be better suited to the Technet community. Please visit the link below to find a community that will provide the best support.

  http://social.technet.Microsoft.com/forums/en-us/w7itpronetworking/threads

• Equium A60: Unable to connect to the browser with Wlan

  Hi on my A60, there is no switch on the right side to connect to the internet browser, the laptop shows large signal and connected, but I can't seem to get access, are there keys that I could use?

  Hello

  Sorry, but I don't understand what you mean with and most laptops have a switch on the side to connect to the internet. Using the WIFI connection?

• Error message: "unable to connect to a windows service windows could not connect to the system event." Unable to connect to the network, Windows Vista Home Edition

  Hello

  When I start my laptop there is a long pause between the home screen and the cover page of my office where the message "unable to connect to a windows service windows has no can connect to the system event. I am unable to connect to networks as says "the dependecy service or group could start. I checked some of the solutions to this problem, including the execution of the 'netsh reset winstock' program that did not work. Any advice would be very helpful. Thank you.

  Hello

  It would be a good idea to run the System File Checker tool to see if you have corrupted files

  "How to use the System File Checker tool to fix the files on system missing or corrupted on Windows Vista or Windows 7"

  http://support.Microsoft.com/kb/929833

  Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

  1. Open an elevated command prompt. To do this, click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. If you are prompted for an administrator password or a confirmation, type the password, or click allow.
  2. Type the following command and press ENTER:
     sfc/scannow

     The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions.

  ___________________________________________________

  And Malware scan:

  Search for malware, if necessary using the safe mode with networking.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Unable to connect to a wireless network - "the network card know driver or hardware related issues.

  Can someone help with the following problem please?

  I'm unable to connect to the wireless network.

  I have an Acer Aspire 5315 with an Atheros AR5007EG wireless adapter. This shows that "working properly" in the Device Manager. I tried to re - install the drivers for it constantly. They seem to everyone install ok but I still have the problem.

  The symptoms are...

  (1) if I try to set up a wireless connection, I get "unexpected error occurred". There is no useful looking for messages in the event viewer.

  (2) if I use "Diagnose and repair" I get "knows the network adapter driver or hardware related issues.

  I uninstalled everything which I think could be the cause of conflicts. I scanned for malware. I have run chkdsk and sfc. I have all the updates from Windows Update. I tried in Safe Mode with networking, but still get the same results.

  OS is Vista Home Basic 32-bit SP2.

  I would be grateful for any advice that might help solve this please.

  I have now re-installed Windows and everything works fine.  I still have no idea what caused the problem, or if it could have been set without a re - install.

  Thanks for the replies.

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• Satellite C660-1NJ - unable to connect to the wireless network

  Hi guys

  I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

  Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

  I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

  Can someone help will appreciate it greatly!

  Hello

  Are you able to connect to open WLan?
  I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
  Of course, you should only done for testing purposes

  If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

• Satellite L650 - unable to connect to the public network (has no valid IP address)

  Hello

  Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

  I have visited many forums and did everything, but of no use.

  1. people with disabilities the tcp/ip V6 of the registry.
  2. the DHCP is enabled. With the help of the automatic IP (DHCP)
  3. also tried with a static IP configuration.
  4. uninstalled the antivirus provided with laptop computer (Norton).
  5 disabled the windows firewall.
  6. restored to factory settings.

  I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

  Can someone please give some other suggestions for this problem?

  Hey,.

  Can you connect to your home WIFI router correctly?

  If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

  What you can try is updated WLAN driver from Toshiba's official website:
  http://APS2.toshiba-tro.de/WLAN/

  If it doesn't work, ask the person contact I mentioned.

• XT720: Unable to connect to the network for upgrades

  Hello

  I recently had a new Motorola Milestone XT720. I tried to get the software updates using the "connection to phone" functionality system updates. If I connect my phone via the network or via WiFI, I get this message "the device is unable to connect to the server, please try again later"

  How can this problem be solved?

  How to get the system through files zip for Android updates?

  Kindly let me know.

  It is not uncommon to get this message when checking for OTA updates - update servers seem to be pretty random that they are actually on and accessible, or not.

  Your best bet for checking updates is to use the Motorola (MSU) software update. Search on a site of Motorola to find. It is a windows program that will check updates for your phone. More updates appear here before OTA (if they are already on OTA)

• G5E22EA #A2N: unable to connect to the wifi network

  When I turn on the wifi in my HP Pavilion 15 laptop pc and try to connect to my network of your choice... it says "check and connection. After a minute, it says "cannot connect to this network '...

  I tried to use the other pc and smartphones to connect to my network of your choice via wifi and they connect successfully and I can use wireless net in other devices!

  Hello @Khaled-819.

  Thank you for your query,

  I understand that you are unable to connect to your wireless network, but other devices connect correctly.

  Have you ran the Windows troubleshooting tool?

  Did you run the Internet functionality and security in HP Support Assistant ?

  Here is a link to HP PC - troubleshooting wireless network and Internet (Windows 8) that should help you.

  If you are unable to connect I would test for a hardware failure.  You will locate network under the title of part.

  HP Notebook PC - detection of hardware failures (Windows, 10, 8)

  To say thanks for the reply please click the thumb up below.

  If you were now able to solve your problem please click on accepted the solution to help others.

• Unable to connect to the wireless network, error message "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.

  Original title: Unable to connect to the wireless network

  Unable to connect to the network wireless Toshiba Satellite A105 PC running Windows 7.  "Windows could not finish repairing the problem because it is impossible to perform the following action. Renewal of your IP address.  Works with Windows XP SP2, IE 8.00.6001.18702 file, I think that Version 3.  It has been installed on a disk provided by Microsoft after that old installation became corrupt (in the sense of Microsoft technical support.)  Before that, wireless network worked well.   (So unable to connect to the Internet for updates.)   Have tried to change the other settings and different messages acquired when it SHOWS that I am connected but cannot connect because of something to do with the certificate.  I don't remember what I did to try to solve this problem in the last days.

  I should add that I have tried the solutions of the previous forum on this topic, and none worked.

  Hi Marilynnla,

  Sorry to hear about the bad experience you encounter. Lets see if the network problem can somehow be archived.

  Read this article and follow the steps. Lets see if it helps in any way.

  How to troubleshoot wireless network connections in Windows XP Service Pack 2 (Works for Windows XP SP3 as well)

• Dell Inspiron 2650-system of operating Windows XP. I am unable to connect to the internet. Status: Network cable unplugged. Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  I have a Dell Inspiron 2650-system of operating Windows XP.  I am unable to connect to the internet.  Status: Network cable unplugged.  Where did this cable located on the laptop?

  The network port is the port on the laptop (it is not that large - look around) that looks like a large phone connection.

  You have a router/network to connect to and a cable network to connect with?

  Look at the 'Network option' part of the poster:
  http://support.Dell.com/support/eDOCS/systems/ins2600/placemat1.PDF

• Unable to connect to the Wi - Fi "Verizon MiFi" network

  Using the Windows XP w/SP3 Media Center Edition operating system. Recently got a Verizon Wireless MiFi wireless hotspot. The computer will connect while the device is plugged into the USB port but not connect wireless. I get the following error message: unable to connect to the network Wi - Fi "Verizon MiFi. To make another attempt, press the retry button. If you want to change the permissions for "Verizon MiFi", press the button change the credentials.

  I tried the Microsoft #871122 articles, 313242, 815485, 826942, 884787 and 915727.

  Any ideas? I'm at the end of my rope.

  Moreover, my laptop that runs Vista operating system connect wireless.

  (1) make sure that u run "NET START WZCSVC" on the command-line as soon as u Ouvrezunesession WINDOWS XP (START, RUN, NET START WZCSVC (command line)).

  (2) START, CONNECT, WIRELESS INTERNET CONNECTION

  --> under the 'GÉNÉRAL' tab: (1) right click on the wireless Internet connection; (2) click on properties; (3) make sure that all THE ELEMENTS under the title "THIS CONNECTION USES THE FOLLOWING ITEMS" are COMPLETELY FUNCTIONAL, i.e. UNCHECK THE ONES THAT DO ARE NOT ACTIVE ~!  (I recently turned off AVG and that this item has been inadvertently clicked on ~!) ;

  --> on the 'ADVANCED' tab: run the NETWORK CONFIGURATION WIZARD to reset your network

  3) http://support.microsoft.com/kb/871122 --> RUN 'DIFFICULTY CE PROBLEM' (ms - fix 50469)

• No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

  Hello

  Know what type of network card you have and download the drivers of its supplier.

  It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

  Jack-MVP Windows Networking. WWW.EZLAN.NET

• When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

  Identification of customer's Windows 7 NFS UID GID information

  I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

  The NFS Client operating system: Windows 7 Ultimate, 64-bit

  Data captured by Wireshark

  MOUNT V1 EXPORT call 3rd party client
  Identification information Flavor: AUTH_UNIX (1)
  Length: 32
  Stamp: 0xc7065970

  Machine name: PC
  UID: 1000
  GID: 1000

  MOUNT V1 EXPORT appeal of the NFS client
  Identification information Flavor: AUTH_NULL (0)
  Length: 0

  It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

  Hello VDAEMP,

  As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
  TechNet - Windows Server
   
  Thank you