First HP: unit vector

Similar Questions

• Random unit vector (x 0, y0, z0) generating

  Hello

  Is there a function that generates random 3D vector unit (x 0, y0, z0)

  Thanks in advance

  Pavel

  Well... I searched a little more and found the base coordinated approach polar: only 2 random variables are generated and they are completely independent.

  It's here.

  Concerning

  Pavel

  

  

• First HP: Program vs define

  I made a program to get the unit vector of a vector with the form [1 2 3], I did this with the option set and program option, the results were almost the same.

  To define

  

  And I wrote a program with CASE option turned on, when I use the program with the option in CASE I get the first result, when I use the program to determine without CASES I get the second:

  

  In fact the program have the same name, because the first was made with CASE option, then I deleted the program and I did a new one without CASE. Why we have this 'erros' ammm y calculation system?

  Hello

  2 factor will come into play here to generate the last significant digit difference.

  (1) as a general rule, the heap can not perform the operations in the same order as the home system as it tries to simplify/fix as much as he can symbolically (betai I don't think it applies here)

  (2) the case works with binary codded floating-point (double in C language) so that home uses decimal coded binary numbers. This may lead to slightly different results. The flare is not exactly the same way and as binarry codded floating points must convert their internal binary value in decimals.

  Note that in the case of 3/sqrt (34), the actual result (accurately) ends with 75265... at home, you get a value truncated ending in 7, while case gives you a tour of 8 upwards (the 5265 was basically rounded)

  Cyrille

• On the digital unit of string conversion

  Hello world

  I'm trying to convert a digital control with min as a unit to a string.

  The fact is that it converts in seconds before it updates the channel indicator.

  

  I noticed that the format "in channel" will convert always first to the base unit (unit multiple value of units conversion value), as W kW (10 kW will display 10000 W) to watt unit.

  Is there a way to format the entry without this conversion value to the first base unit?

  Thank you...

  If you are looking for the syntax of using LabVIEW Format specifier, you'll see a unit option.

  This is the format that you want to keep the string in a few minutes: g {min} %

• Quality of fuse to Mixamo (and then to the unit)

  I have noticed a dip in the quality of the model when going from fuse to Mixamo, and then it dropped quality rest when I put the model in the unit, is there something obvious that I'm missing? Thanks in advance for any help

  HM.  The short answer is that it is a difficult question... how 3D graphics work is basically you create information in the geometry, material and texture maps (diffuse, specular, normal, etc) and these maps provide information the converter.  However, each rendering engine has its own rules for the use of this information.  A specular in unity card is not the same as a specular in Unreal Engine 4 (roughness) card in Photoshop or on the Mixamo website.  So 3D graphics often look quite different when she is caught between the environments.  For details!

  Mixamo.com:  It is a web-based interactive WebGL 3D viewer.  It's not nearly as powerful as the fuse and does not look as nice, I'm afraid.  We are working on some adjustments, so it seems at least "close" to fuse, but at least for now, it's more than a quick overview for you to choose the animations.  Once you download the character and files, you can keep your 3D software and set up and he goes back to the much nicer looking.

  Unit:  It is more difficult to answer some.  First, the unit has a configuration of different texture Mixamo/fuse/Photoshop to use by default.  For unit 5-compatible materials, you'll want to go to fuse and use the file > export option Textures to export a new series of Unit 5 specific textures.  Next, you need to import those and configure shaders to use the new standard shader of Unit 5.  You may need to duplicate the material of the body and make a transparent material separated for the mesh of eyelashes.  Exactly what you need to do is based on the style and look that you are going to your game.  You don't have to use the standard shaders, you could plug in a toon shader cards, for example.

• Rastorized Vector Art becomes translucent

  Sometimes I'm vector art that seems to be quite normal and opaque: screenshot 1

  

  Then I try to convert the file into an image rastor for the purposes of presentation and what happens:

  

  If you can see the first photo, the vector art is just opaque, but in the second image, it was rasterized and seems to be on transparency "multiply". You can also note in the screenshot 1 tab transparency on the right indicates the vector art as usual. However, if I take each piece individually and pixelation, he would look normal, as such: screenshot 3

  

  If I save for web and devices, export to JPEG, or using object > Rastorize (all together), this problem happens. However, it happens only occasionally, and only in the document CMYK color mode. I have rastorized of hundreds of such images without these problems. The graphics in the screenshot have been copied directly from a file I was working with, and I was not the creator of this art, so I do not know the process that occurred to create in the first place. However, the attribute is transferable with the tool drops eyepieces.

  Anyone have an explanation?

  See the attributes Panel and check if Overprinting is enabled. If this is the case, turn the power off.

• Line of text well rolled on top of the vector form

  Hello!
  I know how to create a winding line of text using the pen and text attachment to the Path command. It's easy. BUT... What if I want to PLACE this text a little winding on a shape vector real, say an ellipse. What should be my workflow? As I do is... I first create a vector object, for example, ellipse. Then I create a text. Can I use the same way I described above (ie. Select two things with the SHIFT key then go to the text of attachment to the path). But the problem is... The vector object disappears! And all I have on the contrary is just a text well rolled on top where there USED to be the vector object.
  But I like to keep BOTH, the text and the object together. How this can be done?

  Duplicate your curvy object and then attach the text to the top in the list of layers.

• Export/save as vector logo based in Illustrator for import in AfterEffects - fuzzy problems!

  Hi all

  I use After Effects CS4 and Illustrator CS4.

  I have a logo created in Illustrator which is an eps file.

  It was created for a small business card and is "small".  But it is entirely the vector graphics.  No bitmap as far as I can tell.  I can resize it in Illustrator all all stay crunchy.

  But when I import the file illuistrator in effects in After Effects and enlarge the image becomes "blurred". For example, I see aliasing in fonts. Almost as if I had to enlarge a jpg or a tif.   Any suggestions?  Is there a specific save as or I have to be aware of the export settings?

  For example, should export it under a different format.  I need the alpha channel.

  Thank you

  Rowby

  (1) where can I find the function continues rasterize in AE

  The small icon of Sun in the timeline. Toggle F4 (switches/Modes), if it is not displayed.

  (2) if I create size logo in Illustrator, then I would not enlarge the image.  But if I may, in After Effects, resize the text at a size smaller than 100 percent should I then turn on continuous rasterize?  Or continuous rasterize is necessary only when I enlarge a vector of the illustrator of MORE than 100 percent in size.

  Two different things. Œuvres continuous rasterize, because it first transforms the vector outlines, then calculates the fillings, the stroke of the brain and all that. This can happen when the revision downward and when the ladder to the top. The real benefit, something is sharper. However, often you simply use scaling with CR off, when the downward revision, which increases at the pixel level, interpolate the surrounding values. You would do that in order to keep the more uniform appearance if you use other objects bitmap such as conventional images or video sequences. It's really more a matter of what you prefer in the given situation...

  Mylenium

• Android Air As3 - jerky movement strategy Lag

  Hi, im new to this forum so please forgive me if I have a question in the wrong section.

  I have a problem with Android Air Performance when moving from a movieclip (interpolation) inside a movieclip to a strategy game.

  Let me explain what my structure looks like:

  I have a Movieclip named 'BG' 1280x720pixel preparing to drag Double click on the mouse event that works very well. Inside the BG movieclip, I have an another Movieclip called "Builder". The code below is the "constructor" to move. However, my problem is that when it moves on a Tween and I drag the movieclip "BG" at the same time, occurs a jerky movement.

  I tried to put the movieclip "Builder" in the same location on another layer than the movieclip "BG", by twisting the AS3 code and works fine but the manufacturer only moves from the stage and NOT in the BG movieclip.

  What I want is (located inside the BG movieclip) movieclip generator to move smoothly while being able to drag the BG movieclip at the same time. However it does not lag...

  CODE for the movement of generator:

  var targetX:Number;

  var targetY: number;

  var inTransit: Boolean = false;

  var speed: Number = 5;

  stage.addEventListener (MouseEvent.MOUSE_DOWN, mouse click);

  stage.addEventListener (Event.ENTER_FRAME, update);

  function mouseClick(e:MouseEvent):void

  {

  targetX = BG.mouseX;

  targetY = BG.mouseY;

  transit = true;

  }

  function update(e:Event):void

  {

  First check to see if we must move forward

  If (! transit | isNaN (targetX) | isNaN (targetY)) return;

  find the direction to the target

  var i: Number = targetX - BG.builder.x; x direction

  var j: Number = targetY - BG.builder.y; y axis

  Now let's see how close you are to the target

  If you're closer, then speed, then make sure that the amount of your change

  mag var: Number = Math.sqrt (I * i + j * j);

  var dif:Number = Math.min (mag, speed);

  If (dif < speed) in transit = false; turn off transit when you got it

  now make your direction a unit vector

  I / = mag;

  j / = mag;

  then multiply by your dif to get

  the speed of your object vector

  I * = dif;

  j * = dif;

  If (off = true) {}

  BG.builder.x += i;

  BG.builder.y += j;

  }

  }

  CODE FOR the event drag mouse 'BG ':

  BG.addEventListener (MouseEvent.DOUBLE_CLICK, fl_StartDrag, false, 0, true);

  BG.addEventListener (MouseEvent.MOUSE_UP, fl_StopDrag, false, 0, true);

  function fl_StartDrag(e:MouseEvent):void

  {

  OFF = false;

  e.currentTarget.startDrag (false, fl_DragBounds);

  e.currentTarget;

  counter = 1;

  BG.addEventListener (Event.ENTER_FRAME, updateCounter);

  }

  function fl_StopDrag(e:MouseEvent):void

  {

  e.currentTarget;

  e.currentTarget.stopDrag ();

  BG.removeEventListener (Event.ENTER_FRAME, updateCounter);

  }

  How can I do to fix the problem, and why is this problem or delay?

  Please forgive me as I'm new to Flash and still learn

  Thank you

  AlpaxJ1
  

  every object that has x, y of changes (and no other changes) should have its cacheAsBitmap property enabled.

  each object which undergoes additional changes (excluding the movieclips that change managers) must have its active cacheAsBitmap and its cacheAsBitmapMatrix assigned (usually at a new matrix())).

• 50g - unable to resolve a simple system of equations

  It's very easy to do on my Casio FX115-ES, but I can't understand how do on the 50 g for the life of me. I am trying to solve a simple system of equations, illustrated below, for a static engineering courses.

  (F1) sin (30) + (F2) sin (30) - 6 * cos (20) = 0

  (F2) cos (30) - (F1) cos (30) - 6 * sin (20) = 0

  I know it's a simple problem and I can do it by hand, but we'll soon be solve systems with 3 + unknowns. I love the RPN, so I need to be able to quickly resolve these systems on the 50g. I have read the books and searched the Internet for 30 minutes and I swear that nothing I do works. I can't add the words sin() and cos() in a matrix. Solve the paintings, num, s address, m solve... None of this works! I know it's user error, but I have no idea where to start.

  Thanks for any help you can provide!

  Bill

  The unusual notation is shake me up.  Are variables F1 and F2?  If so, we will replace by X and Y and rewrite your system in the standard format:

  Sin (30) * X + sin (30) * Y = 6 * cos (20)

  -cos (30) * X + cos (30) * Y = 6 * sin (20)

  There are many ways to solve this system on the 50g.  How I find simpler (less keystrokes) is by dividing the constant vector by the matrix of coefficients.  There are several ways to do it too, but it's my favorite.

  First of all, make sure your 50g is in approximate mode: while holding down the button to the right, press repeatedly until you see the "~" annunciator instead of "is", then release the button to the right.

  It goes without saying, you must also be in degree mode, so if the first anunciator said RAD, run DEG to change to DEG.

  Now, press the MTRW (['] left shift) to start the MatrixWriter application.

  First enter the vector of constants:

  20 COS 6 * ENTER

  20 SIN 6 * ENTER ENTER - > see [5.638... point 2.052...] on the stack.

  Now enter the matrix of coefficients:

  ENTER 30 FISHING

  ENTER 30 FISHING

  down-cursor left, cursor left, cursor

  ENTER 30 COS [+/-]

  30 COS SIMULTANEOUSLY on KEYS-> see the matrix of coefficients in the stack.

  Divide then: /--> see [4.45... 6.82...], which is [X, Y], the answer.

  If you want exact solutions (and not just the decimal approximation), do all the foregoing in exact mode (sign '=').   Don't forget to put each algebraic expression in single quotes marks.  You can use the MatrixWriter, or you can just type it directly into the battery like this:

  ['6 * COS (20)' '6 * SIN (20)'] Come in

  [["SIN (30)" "SIN (30)', ' - COS (30)" "COS (30)"]]

  /-> of simplified solutions

  A way to simplify these is:

  OBJ→ DROP EVAL (see Y on the stack)

  SWAP EVAL (see X on the stack)

  Exact solutions are 6 * cos (20) ± 2⎷3 * sin (20).

  There are many other methods to solve systems on the 50 g, each with its own entrance of syntax.  Don't forget to single quote each algebraic expression whenever you are in RPN mode.

  Hope that helps!

  -Joe-

• Re-installation of 98. floppy drive and the CD Player do not work

  Hello
  I loaded 98 in our 3410 CT. 98 is installed, but the system has not picked up on our floppy (usb) and our cd. I know I have to get the drivers here, but how? The cd will not work because it has no driver present as is the case for the floppy drive. The boring bit, is that I have the driver on a separate disk. Any body has any suggestions.
  See you soon

  Carpet

  [Edited by: admin on 26 June 05 20:52]

  Hello

  I'm not 100% sure here, but I think you can resolve your situation by enabling legacy mode USB FDD in BIOS (if not already done), and then boot from a drive to floppy BACK/Win9X and then copy the drivers to the HARD disk.

  Try this:

  -Turn on your 3480 but look out for the Toshiba logo!
  -When you see the logo very quickly press the ESC key several times (normally just 1 time will do, but that's if you know just WHEN to press it).
  -You will receive a message saying PRESS F1 key... Do this.
  -You are now in the BIOS. Look for a setting that says something like "Legacy USB FDD mode". Set it to "Enabled".
  -Also look around to make sure that the boot priority is set to FDD as first boot-unit.
  -Save the settings by pressing END, then answer Yes to the question "are you '.
  -To get a bootable BACK / Win9X floppy. Insert into the disk drive and start the machine from him.
  -Now manually copy the floppy drivers (unzip it first!) the floppy drive in a temporary directory on the HARD drive.
  -Copy the drivers (2 versions exist) and the driver on the CD while you're there.
  -Reboot, start Windows and enter the Devicemanager to update the missing drivers from the temp directory.

  TADA!

  Good luck!

  Tom

• Unable to connect wireless Internet at home. Other devices are working properly.

  Cannot connect Internet WiFi at home, started yesterday, had this ipad 2 years without any problem.  All other devices in the House work in wifi without problem.

  First, restart unit. If this does not work, then try to reset your network settings:

  Tap Settings > General > reset > reset network settings.

  This also resets the Wi - Fi networks and passwords, cell and other parameters settings. HTH

• Satellite 1410-604: WiFi disappeared from the Device Manager

  On my Satellite 1410 604 wifi seems to be dead. Don't turn on. FN + F8 does nothing and it is not even in network adapters in Device Manager.
  Any suggestions?

  Hello

  Did you use Wireless LAN in the past?
  I ask because the wireless LAN optional on this unit and you must upgrade first the unit with the minPCI wireless LAN card to work with WLan.
  Have you installed the card?
  This info is very important because I don t know whether or not there is a Wlan card.

  Good bye

• TPT2 3 G upgrade?

  Bought a TPT2 the other day, I have to go through a list of thought problem resolves but it seemed ok after a few hiccups... only problem was that the version was not enabled Wacom. Sent back today, but decided to open it beforehand, very easy to do. From the USB port with a credit card, the model was capable 3 G, has a card in there but without its pretty lame to go back, he went... am now looking for another, because it is a really good product, almost went for the W700 i3 version but is considering moving a command for a wifi TPT2 and the upgrade of the unit with a map... another thread of wacom is for the first TPT unit , I was wondering if someone had modded the TPT2? What are the internals on the only wifi versions as they come with a slot sim at the top but watching their weight in comparison with the 3 G enabled versions lack the internal card.

  Tempted to buy one on ebay just to open it and see, send back if it's a no go.

  Its possible, but the photo I've seen looks that the area that the Ribbon connects to is completely flat. There is room for it, but it would very probably advanced brazing to get it to the Board of Directors. And you will need to disassemble the unit and remove parts over the attenna.

  Feasible, but can always attached if it is not so important to me. LTE on my phone is still better than the 3G.

  Prices have increased significantly down since the launch, the mobile broadband looks like its only marginally more. I think that $ 20 the last time I checked. So since you have not yet, maybe just get the 3g model and do it with.

  You start invalidation warrenties when you take it apart and break the stickers.

  Edit: Certainly not as easy as the TPT1.

• Get electric shocks when the new load slate 7

  Hi all

  My gf just got me a slate of new 7 for Christmas and when I load it with oem charger and cable I get electric shocks of metal run the Tablet when you plug in the charger.

  I tried to connect a support ticket but my warranty is valid and my support has expired so I was not allowed to post hp.

  First hp unit, extremely not impressed by taking in charge and produced so far, how can I contact someone?

  Thank you

  L

  If the slate is new it has a one year warranty. Go to the web for the 7 slate support portal and click the Contact HP link. Choose one of the means of contact on the web page.