First image too large

Similar Questions

• Office extended; display does not display, image too large, not centered

  Hi, I know that it is apparently a matter of stupidity, stupid with a solution obvious but wait - I'm not a

  full retard. I already did all the utilities to change screen resolution and checked the settings

  for the "Display".  I've updated all the drivers, checked the compatibility, etc. Basically, I have tried everything I can think

  and yet my desktop image lying on my 37 '' Sceptre flat screen TV is not placed correctly / size right.  I can't

  See the entire desktop (as appearson the screen of my laptop).  The whole picture is fire too far to the right (in front of the tv),

  leaving an area 3' black on the side left which is unaccessable to my cursor.  Size of the window when on the internet is too large for

  access the menu items. The window is stretched too long in width and too short in length; content is not distorted.  One

  monitor only - once identified, the 1 appears on both screens. 1 is the primary monitor. Its driving me crazy - it's

  something I should have been able to take care of myself, but I give up. Any help would be appreciated a lot.

  Hi Ankhisis,

  ·         What is the brand and model of the computer?

  ·         Did you do changes on the computer before the show?

  Check the status of the display driver in Device Manager:

  a. click on Start

  b. in the run box, type in devmgmt.msc

  (c) in the Device Manager window

  d. expand graphic cards

  e. check if an error code is listed.

  Follow the methods below:

  Method 1: You can see the below mentioned article Microsoft Knowledge Base and check if the problem persists.

  Resources for troubleshooting problems in Windows XP

  http://support.Microsoft.com/kb/307960

  Method 2: You can also try to change the manual steps of resolution screen and check the results.

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  Let us know if it helps.

• ASA 5520 Boot Error: Boot Image too large

  Hello

  I had 2 ASAs in an Active/Active configuration, but when I deleted the current config and passed back to the simple mode I get an error message at startup ' error: Boot Image too wide. " I've not seen any discussions or discussions on this matter. I am not sure, but I think the best way to solve this problem would be to take the configuration of starting of my still working ASA... send it to a tftp server and put it back on my ASA that will not start. If anyone has experience this problem or can give me a definitive answer regarding a possible solution please post a reply.

  Thank you

  Chris Bailey

  You can download the file from the following url. But you must log in using your ID EAC:

  http://www.Cisco.com/cgi-bin/tablebuild.pl/ASA

  The two download asa and asdm.

  Once you've got the file asa, load everything first to your ASA. Restart, and then go to the CLI. Load the asdm by using this command:

  copy the flashftp://your-server-IP/pathtofile t: / asdm - 511.bin

  http://www.Cisco.com/en/us/partner/products/ps6121/prod_release_note09186a00805b8543.html#wp37943

  http://www.Cisco.com/en/us/partner/products/ps6120/products_field_notice09186a0080655b8b.shtml

  http://www.Cisco.com/en/us/partner/products/HW/vpndevc/ps2030/products_tech_note09186a00804708d8.shtml

  Good luck.

  Rgds,

  AK

• HP officejet Pro 8500 has: print image too large printer cuts the half page out

  My Hp Officejet Pro 8500 has is way big text/image printing and cutting half of the page. How can I fix?

  I've uninstalled and reinstalled the driver, I unplugged and re-plugged, I looked in the settings and do not see where I can change the print size. Any suggestions?

  Hi @lucky33,

  Thank you for visiting the Forums from the HP Support! I see when you print on your HP Officejet Pro 8500 a text is very large, so it prints on several pages. You have tried without success, some troubleshooting steps.

  You try to print a document or an element of a web page? What program or browser you use?

  If you are using a Windows operating system, please try the following:

  1. open an Internet Explorer browser, go to the far right click on the gear icon

  2. Select Print Preview

  3. now along the top, you will see an option to change the size of the page, please make sure that it is set to adjust or 100%.

  4. now, try a test page, the text is expanded?

  Now go ahead and run the HP Print and Scan Doctor:

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know the results.

• Image too large on iPhone and iPad

  Hi there, not an expert here but I have a question on my page: www.piso13.com

  On my desktop browser I can see my web page as it should:

  

  But on my iPad, the image shows as she was blown up:

  

  The image is set to scale to fill

  Someone at - it no experience or information on this problem?

  Thank you.

  work on my old ipad 3

  

• The image file is too large

  Hi, I am trying to download a book on Smashwords. I made the pictures so small now that I CASN barely see them (2.5 cm). Yet, this short story 1 200 words and 39 works of graphic art is still too large to download in format Doc (the one acceptable to swords)

  I don't want to download a mac epub as it blows the content too. It never works with Smashwords requirements. (I made hundreds of changes and moving images in all directions no matter what)

  I tried to compress the file and there is Mo.9 difference - not enouch.

  I'm at 17.6 MB now, and I'm afraid this file will not work.

  Is there anything I can do to make a smaller file with works of art (for small children) working here? Thanks guys and girls. Much appreciated if you go by.

  To create this in what applications do you use?

  Some applications (including MS Word, Pages, but also others) store several revisions and changes in the main document. Sometimes it's helpful (makes it easy to retrace your steps), but it leads to the bloat of the document.

  There are two ways to reduce this. In Word, try to save as... to save a clean copy of the document (without any changes). In the Pages, use file-> advanced-> reduce the size of the file to do the same. Other applications may have similar options.

• Problem with the documents/images being too large

  I can scan using the HP Officejet J3680, but the images are too large to email. I tried scanning the documents in TIFF files, PDF files, JPEG files, and they all do the same thing. I recently bought a computer from Gateway with Windows 7 already installed. My last computer has XP and worked very well with the same material. I updated the drivers and downloaded the HP Solutions Center, and nothing seems to help. I have cause to scan and send documents frequently and it is very frustrating.

  Looking for a parameter in the scanning software can specify a lower resolution.  Boulder computer Maven
  Most Microsoft Valuable Professional

• Monitor image is too large

  I just installed Windows Vista on my Dell Deminsion 2350.  Everything is OK except that the image is larger than the screen of the monitor. How can I reduce the size of the image to fit the screen of the monitor?

  http://support.Dell.com/support/downloads/index.aspx

  Go to the Dell Web site > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And how to change the resolution of the screen; you need correct drivers installed to do this:

  http://Windows.Microsoft.com/en-AU/Windows-Vista/change-screen-resolution

  Change the screen resolution

  Screen resolution refers to the clarity of the text and images on your screen. At higher resolutions, items appear sharper. They appear also smaller, so more items adapted to the screen. At lower resolutions, fewer items adapted to the screen, but they are larger and easier to see. At very low resolutions, however, images may have serrated edges.

  See you soon.

  Mick Murphy - Microsoft partner

• Received an Error Message using the Widget featured in publication of news about the locations are too large to rasterize.  Cannot preview page.

  I get an Error Message when previewing a page that contains the Widget for Composition of new functionality.  The Message says that the locations are too large to rasterize and I need to make it smaller in size.  I tried all this burt, nothing worked.

  This error occurs generally if/when there is a block of text high who happens to use a system font (and so must be output as an image). If that is the question, go to a Web font (always the first choice when you select a font to use on the web) or a 'web safe' font for all the text in the frame will prevent the error.

  If that doesn't seem to be the issue, we will need more information about the specific page which generates the error.

• "The result too large."

  I'm trying to analyze a map of 1756, which is 18 x 24 inches. This is a print from an engraved copper plate, so I want to scan at high resolution. My scanner is a Scanner Epson E11000XL - GA Graphic Arts Expression, which is advertised as capable of resolution 2400 x 4800 dpi, but can only scan a document that is more than 12.2 "x 17.2", so I scanned with four quadrants that overlap to 1200 pixels/inch and planned to back them in a single image with Photoshop elements 11. I'm trying to align the two first two quadrants in two layers. However, when I try to move the top layer and align it with the bottom layer, I get this message: "unable to complete command move because the result would be too large." What I am doing wrong?

  RLAinK wrote:

  Is Adobe sells a version of Photoshop that will handle larger images?

  I don't know about the full Photoshop CS, don't know if it can handle more than 30,000 pixels. If you don't get the right answer in this forum, you could ask the Photoshop one.

  My computer has 16 GB of memory, so I can hardly believe that this image would be a problem for her.

  Items 11 is only a 32-bit application, so it can't handle more than about 3 600 MB of RAM (assuming that your operating system is 64-bit).

  Items 12 for Mac is a 64-bit application, but I don't think that the 30 000 pixel limit has been changed.

• 413 request Entity too large (history)

  I started having a sync error that won't go away. When I watched the news I've seen a lot of mistakes in the post. So the first thing I tried was to blow everything since I've been using the synchronization of the former. Then configure the new sync but I still had an error. Only this time, it was only a post failure and history was precisely the problem:

  1412870549016 Sync.Collection DEBUGGING POST length: 2152216
  1412870551015 Sync.Collection DEBUG mesg: POST fail 413 https://sync-141-us-west-2.sync.services.mozilla.com/1.5/10221627/storage/history
  MESSAGE from DEBUG Sync.Collection 1412870551015 413 https://sync-141-us-west-2.sync.services.mozilla.com/1.5/10221627/storage/history fail
  1412870551015 Sync.Engine.History DEBUG records Uploading failed:
  413 request entity too large

  If I disable the history then everything is fine and it syncs very well. But of course, now I can't synchronize my story. Any ideas on how to solve this problem? Am I stuck having to blow my story?

  Anyway... went ahead and blew the history cache. I guess it'll just keep going because the story gets too big and there is no real solution for this.

• When the scaling in the layout, 1st page prints correctly, but the following pages were not properly/too large for the paper, parts of text missing scale

  When you try to print in Firefox and when the scale to the size of the page in the page layout, the first page prints correctly, but the following pages do not scale correctly and are too large for the paper, with the parts of the text are cut off at top and right. It is not fixed by checking or unchecking the scaling / shrink to fit page width "ignore" in the print window, or by changing the scale percent.

  I am running Firefox 15.0.1, on Mac OS 10.5.8.

  The same problem happens in preview print and if I save the copy in a .pdf file

  I tried all the fixes in the how to and others in various forums with no improvement.

  This happens everytime I try to print a document from scaling upwards or downwards in Firefox.

  I note the bug has been fixed and should in Firefox 21 right now, it will mean the use night http://nightly.mozilla.org/

• Cannot delete an e-mail in my outgoing folder guard trying to send but says file is too large.

  My daughter has tried to send some pictures using my outlook express. After that 3-4 minutes I get an error that the size is too large. I can't remove it and evry time I login it tries to return with the same results. I use it to send invoices for my business, but he doesn't send them. I also am not getting my Inbox because he's trying to send first, and then stops working. Thanks for any help. Keith

  Ok. A little more work, but don't be discouraged.
   
   
  Create a new Outbox and sent items folder.
   
  Follow these steps for the box of sent, and sent items after you move the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the Outbox.dbx and Sent Items.dbx file and remove them. New files will be created automatically when you open OE.
   
   
   
  
   
   

• All attachments in Outlook Express are too large to see

  Each attachment in Outlook Express is too large to see.

  When the photos are displayed in OE they are displayed full size...
  There is no way to constrain the size in pixel dimensions to fit
  the window of the OE. You can use the scroll bars to see the entire
  picture, but it's far from ideal.

  Best bet would be to copy attachments in a folder on
  your hard drive and view them with images of Windows and
  Fax Viewer.

  Just open the message that contains the attachment and
  Reach... File / save attachments. Choose a backup file and
  on the left, click on the "Save" button.

• print size too large after changing the print cartridge

  Sounds like an easy fix should be up there, but I'm not super computer savvy... after that we changed the print cartridge for the first time with this printer (and who knows what may happen after when my husband tried to fix it), the font of printing is too large AND prints a blank page of paper before the actual page prints with a font that is too large to fit properly on paper 8.5 x 11 inches. Normally, there are all the parameters that must be set after simply change an ink cartridge? Help!

  Hi Wendy,.

  You can also check: http://h10025.www1.hp.com/ewfrf/wc/manualCategory?lc=en&dlc=en&cc=au&lang=en&product=4089468&

  I hope this helps.