First infinite sum of HP error

Similar Questions

• First Pro CC gives an error "Could not create image buffer" and crashing after installing a videocard GeForce GTX 1070.

  Hi all

  I recently installed a GeForce GTX 1070 video card and drivers current in my bench mounted, very happy for the potential break in the rendering and playback (I was using previously a very old ASUS Radeon HD 7850). I had nothing else problems since.

  When I first tried a project of creation of opening, audio refused to play (speakers, headphones, everything...) I looked at the volume mixer while playing through the timeline and no audio only showed upward). Everything seemed fine. I closed, cleared the cache, opened the first, this time hold Alt while doing so to reset the preferences. Open very well, audio read back fine, that only now first was blocked indefinitely the generation of PEK files for a short audio clip in the project.

  After a long bit of troubleshooting in the speakers, I went ahead and did a complete uninstall of Premiere Pro and After Effects, then reinstalled both programs to their current versions (2015.4 and 2015.3, respectively). No more problems of generation PEK, but something much worse. Now, whenever I try to change the CUDA acceleration enabled, I can maybe five minutes absolute performance first until I get an error "Could not create image buffer", warning of notifications of Windows that your computer is low on memory, and finally, a complete crash where the screen goes black, flickers a couple times, then stays black for good with only the mouse cursor appears on the screen.

  The images that I'm editing is all images Go Pro, no effects applied. I am doing this for a client and need ready in a week, but the constant crashing makes them difficult to work around. I can more or less run by changing the acceleration of software only, display options but it is much slower and the memory is still eaten up like crazy (if I place the open Task Manager and start to scrub through the timeline I can watch the memory usage get up to 95% in 20 seconds approximately). Reading suffers as a result once the RAM is full until almost full.

  Technical specifications

  First Pro CC 2015.4 (latest version)

  OS: Windows 10 Pro (Version 1511)

  CPU: Intel Core i7 - 5820 K CPU @ 3.30 GHz

  RAM: 16 GB

  GPU: EVGA GTX 1070 (latest drivers)

  SSD (OS and Adobe Suite installed): SanDisk SSD internal 240 GB 2.5 inch SDSSDA - 240 G - G25

  Hard drive (where I put my multimedia files): WD Black 2 TB Performance Desktop Hard Drive: 3.5 inch, SATA 6 Gb/s, 7200 RPM, 64MB Cache

  Motherboard: ASRock X 99 Extreme4 LGA 2011-3 ATX Intel

  Film source - source footage is an hour of video of Go Pro, all arranged on the timeline, no effect applied (I'm just trying change the original film in a short video).

  Type: MPEG Movie (.mp4)

  Image size: 3840 x 2160

  Frame rate: 29.97

  Format of the pixels: 1.0

  It is worth noting that, with my old dusty Radeon GPU, I was able to edit these clips with ease. No reading, no problem of image buffer. I do not see my RAM never go above 60% usage, when I got this card is installed.

  Also worth noting, that the first, I have noticed absolutely no problems, and the video card itself seems to work very well. I can play MGSV at max settings with perfect reading, as well as other graphics intensive games.

  Any help?

  It's been almost a week and I had zero problems. First Pro CC 2015.2 works like a dream! I'll go ahead and mark this thread closed.

  For those just tuning, I was able to find a solution by uninstalling the Premiere Pro and After Effects, and then reinstall them back to last known stable on my bench (Premiere Pro 2015.2 and after 2015.2 effects). So far, running these versions has been very good, even with active CUDA acceleration.

  The only downside is that all the projects I've done in Premiere Pro version 2015.4 should be re-edited from scratch. But I've had absolutely zero problems using the program, which is a relief. Hope Adobe fixes this problem whenever 2015.5 is out!

• Cuando accedo has the part of Creative Cloud para una prueba first descargarme apps, me pone 'Error in the descarga' siempre y nor even me do appear a las apps. He e desintalado are several veces y nada, todo igual. ¿Alguien sabe what p

  Cuando accedo has the part of Creative Cloud para una prueba first descargarme apps, me pone 'Error in the descarga' siempre y nor even me do appear a las apps. He e desintalado are several veces y nada, todo igual. ¿Alguien sabe what pasa?

  Please see the links below.

  • Using creative cloud | Download error in the applications tab of Creative Cloud Desktop Application
  • This facility is no longer functional.
  • Persistent Cloud error - error download - creative
  • Download creative cloud App error

  Hope this will help you.

  Kind regards

  Hervé Khare

• Have a problem... not loaded project.  {First pro has encountered an error [f:\ppro603_Win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe/k]}

  Have a problem... not loaded project. work on it for 8 months. has never been anything like this with him or other projects. When you load a project first generates an error. {The first pro has encountered an error [f:\ppro603_Win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe/k]}    Create the project for automatic registration of Eve also unloaded. When I sav the project for the last time on the pro first warned me about all the problems and save projects without any problems. It's one thing was unusual in the program - the timeline when switching between sikventsy constantly dropped as parameters to the user. And as usual. I tried to load the project from another computer. Import the project in after Effects. import the project into a new project on pro first. But it does not solve the problem. the error all the time. Please help, a lot of work in this project. This is a great betrayal of the premier pro...

  Hi Pochtawood,

  Yes, uninstall iCloud will allow you to create new projects.

  For existing projects, you can repair them with a patch created by a user.

  Details and links to the patch are here: Re: Debug f:\mightysilt_win64\shared\adobe\mediacore\mediafoundation\api\inc\keyframe event

  Thank you

  Kevin

• First Pro CC 2015.3 error Stop Driver NVIDIA

  Hello, after the upgrade to Premiere Pro 2015.3 of CC, any project that is with CUDA enabled video player.

  I open the project and load all the content, the NVIDIA driver for the works and the 'Program' my workspace screen is all black with only audio. If I change my project to work with the software invez CUDA, he returns to work, put in CUDA I very quickly in my tasks.

  How can I solve this problem?

  I tried everything, reinstall the driver, I did tests with 3DMark to see if it was not the video card. All right.

  In Adobe Media Encoder, CUDA works perfectly, just in the first of this error.

  Recognizing;

  Amauri

  FOR INFO.  I always use the older drivers, v331.82 on dual Quadro K2000, Ultra key/Fx to 2015.3 works without problem.

• Updated the first CC 2015 I get error U44M1I210. How can I resolve this problem and install the update?

  I get error U44M1I210 when any new first CC 2015. I uninstalled and tried reinstalling, but the problem persists. You have to solve this problem immediately.

  U44... Update error http://forums.adobe.com/thread/1289956 can help

• Download Lightroom for the first time at Capitan creates error

  I just upgraded to L Capitan and downloaded Lightroom for the first time (from Creative cloud), but when I try and open it, it comes up with "an internal error has occurred" and then "an error occurred when attempting to change modules" and goes no further.  Any suggestions?  Thank you!

  You can also check below link, if the solution to the first response did not.

  Error changing modules

• Why am I not able to install the first pro who keeps throwing error U44M1P7?

  I tried to install the first Pro 6 times now and it keeps failing. The last attempt threw the error U44M1P7.

  U44M1P7 - updates: http://helpx.adobe.com/creative-suite/kb/error-u44m1p7-installing-updates-ccm.html

  ... a solution to this problem.

  1. launch of CC App (Photoshop, Illustrator, etc.)

  2. go to HELP-> UPDATES

  3. He will start Adobe Application Manager, then uncheck the BOX ALL of Adobe CSXS Infrastucture 4 files (910 KB) under all of your applications up-to-date.

  4. click on the REFRESH"" button.

  U44M1P7, U44M2P7 - CC help / cannot apply the extensions 6.0.2 update manager | Mac OS: http://helpx.adobe.com/creative-suite/kb/unable-apply-extension-manager-update.html

• First pro has encountered an error

  Hello. My first pro stop runnig. All I have is just the message error "premiere pro has encountered an error.

  Please guys help me.

  Try this:

  Rename the Adobe folder in your Documents library and see if it works.

  Thank you

  Regalo

• "First Elements has encountered an error"

  Hey guys,.

  I have a huge problem with 12 EP. I edit a project which was shot by a gopro hero camera 3 +. The film is directly inspired by the cam without convert them previously.

  During the work simple, the following error occurs during the simple selection or playback of an element and PE stops completely.

  

  If this error is known and how could it perhaps be solved?

  Is what I tried to remove the audio, it has worked so far, but it is obviously not a solution to the real problem. Conversion of files before editing would be able to prevent the error?

  Thanks for your help!

  Henrik

  So of course, I haven't used transitions and I don't plan to use them within this project.

  Gaps seen on my screen captures were put there by me, because I understand your first tip in this way. While initially variances were not there at all.

  Either way, my operating system is Windows 7 Pro (64 bit).

  a google search was not really promising, he recommended that the advice of your first post. So since now the error has only been observed and resolved if you use transitions.

• Recurring first Elements 7 & 8 Windows error message

  Hello

  I use first Elements 7 with Windows 8. It works great, when it works, but I regularly get an error message, ' Sorry year error has occurred "and closing the program automatically. This product only when I open it and choose to open a new project or an existing one. Once a project is opened I have no problem using it. I uninstalled and reinstalled the program, but I still get the error message very often. I was wondering if it was because it is not compatible with Windows 8.

  Thank you very much for your help!

  Hi Lotusss33,

  Please try to run first elements 7 in compatibility mode.

  Right click on first elements 7 and click Properties.

  Click on the tab compatibility and check the option "Run this program in compatibility mode" and choose the operating system such as Windows XP.

  Thank you

• Re - installation of first 10 items... error

  Hi all

  I have a problem!

  Try to reinstall first items 10, and I get this error message...

  The ha installation process has encountered an error during the installation of shared technology

  This occurs during the installation of the Organizer.

  The process then restores the whole instalation.

  Cannot understand why, cos its been running for about a year.

  Help appreciated.

  Ian.

  Hello

  Please rename the folder PDapp PDapp_old to: C:\Program Files (x 86) \Common Files\Adobe\OOBE\

  After you rename the folder try install the first Elements 10 it should get installed.

  Kind regards

  Jatin derfoufi

• First elements 11 Audio import error

  I have PE - 11 on my desktop and my laptop.  I get an error - but only on the desktop.  No matter which movie I am editing - when I go to drag the music file (soundtrack) for blocking the "audio of the drag here", I get the following dialog box, saying "Add Media Failure" followed by "the importer reported a generic error.

  That's all it says - and he does not accept the audio file.  No matter if I do it in the 'rapid' or 'expert' or if I try to move it to another audio track - I get the same error.

  When I drag an audio file on the audio track on the laptop, it works perfectly.

  Is there something I can do - on the desktop - to eliminate this error?  I really don't want to reload all media to the laptop and build times from scratch.  At the end of the day, the office is my primary workstation - so I have to find a way to solve this problem.

  As I am dragging the file, I see the sign "more" + but when I get to the set-up and relase the mouse, the error strikes me and don't move the file

  Any ideas?

  Thank you!

  Coach,

  iTunes has changed some things, compared to their music and their files. For other reasons, I have an older version of iTunes, which works very well, and with which I am familiar. The more recent versions probably offer other benefits with respect to the use of music in a production of video, but as I do that, I don't feel the need for it.

  Coming back, the only way to use iTunes music was to create a playlist in iTunes, and then burn it to a CD-Audio. That CD could then be torn (it would be the CDA format), to a 48 kHz 16-bit PCM/WAV (as John T.). The resulting PCM/WAV would incorporate in first perfectly. I use Adobe Audition to tearing it, but many free audio editing programs can do the same thing very well.

  With this workflow as a fallback, let's see if we can get both of your computers managing the iTunes files properly. First of all, you have iTunes (and identical or very similar versions) installed on two computers? You have the same, or very similar versions of Apple QT Player installed on two computers? If this isn't the case, that is where I would start.

  Good luck

  Hunt

• First elements Timecode.cpp - 1014 error when adding media

  Software: First elements 11

  Camera: Sony DCR TRV22E

  OS: Windows 7

  When selecting Add multimedia elements, I get: [..-.. \Src\Timecode.cpp-1014] error several times, when the capture window finally arrives he says that the capture device is currently offline.

  This happens not only when the unit is plugged in and power but also when the camera is not connected.

  I tried different IEEE 1394 drivers available in windows 7 and none of them work.

  Host compatible OHCI 1394 controller

  Controller of compatible host OHCI 1394 (Legacy)

  VIA 1394 compatible OHCI Host Controller

  The connection to the camera via firewire is ok because I can download a video of him using Nero Essentials video, I can't do it through first elements 11.

  Post edited by: foradobeuse Oops, I put the incorrect error code in the title, it should be timecode.cpp - 1014

  I think I solved this problem.

  I have a number of external USB connected, for example, hard drives, webcams, mouse, keyboard etc., devices so I unplugged individual devices until I found that the Error 1014 is more appeared when adding media.  I plugged the other USB devices back in but kept the last disconnected device and can now add media from my miniDV via firewire.

  I don't think we can let off the hook here PE11, since I had no problems with USB so far and each capture freeware program that I tried did not have a video capture problem I had plugged in any USB device.

  Thanks to all who have contributed and I hope this helps other users faced with Error 1014, look at the number of points of view on this discussion after only a few days (~ 300) I don't think I was the only one.

• Adobe first Elements 7 files main errors

  I have Adobe first Elements 7 and whenever I try to change some of my film I get significant errors. Here's what I did to try to resolve the problem:

  through some troubleshooting on adobe.com

  uninstalled and reinstalled PE7

  a system has restored several days ago, when it was working fine

  The film that I'm editing is more than an hour long and has a variety of clips video, photos, narration and music. When I press on play works well enough, but when I want to move the narrative or 'clear' a certain clip, he goes crazy! Here are some of the error boxes I've seen:

  Premiere Elements debug event

  [..-.. \Src\Sequence\TrackItemTrack.cpp-480]

  and also this

  [..-.. \Src\VideoSegment.cpp-55]

  When those who come, I can just click 'continue' and then it appears again and again until finally he says that there is an error, it should close and he will try to save the project.

  He has also developed until the file open:

  Found the default catalog. Trying to open the default catalog.

  And, when I did the system restore it came when I opened PE7:

  The license subsystem has not catastrophic. You must reinstall or call customer service.

  I have a deadline to meet with this film, but I can't even change it shut down on me so much! I tried opening other PE7 movie files and edit them and they seem to work very well from the little I did. If the file itself has something wrong with it? I had minor problems with PE7 before but nothing as bad as this! I have my video file saved on the hard drive of the computer and two separate external hard drives. I tried opening the file to all three places, but they are all the same.

  I'm not a computer expert, but if you need more info, let me know, and please answer as soon as POSSIBLE!

  Thank you!

  Well, the program can handle images of large size, up to 4096 x 4096, however, which can not handle those is your computer. Even on my NLE workstation, it does not have a lot of images pixel 4000 x 4000, and it will start to have problems.

  In addition, the resizing in PrE (or PrPro) algorithms are not nearly as good as those of Photoshop. Remember, this is a video editor, not an image processor. This ARTICLE will give you some information and some advice. So if you resize in Photoshop, you will end up with the best images and also a much lower fee General on your computer. If you work with large images, you want to look in Adobe AfterEffects, because it allocates resources and memory differently and you will edit composite to about 40,000 x 40 000 pixels. Don't remember the exact pixel x pixel boundaries.

  Good luck

  Hunt