First installation

Similar Questions

• OfficeJet Pro 8610: First installation Officejet pro 8610/storage

  Hello

  I turned on the printer to set up as a printer of replacement for when the usual distribution. I was hoping that I wouldn't need to install the ink cartridges, so I plugged into the power supply. Now, he tells me that I can not disable the printer because it can damage it. But if I don't printhead for a long period (over 6 months) the ink can dry and must eventually be replaced and which has a very high cost. So is it safe to keep the printer stored for more than 6 months with the installed ink cartridges and the ink will not obstruct Chief? Or can I turn the printer off without completing the first installation of the printer?

  Thank you

  Hello @nmc1987,

  It is a great place to get help! I read your post and you want to know if you need complete installation, even if you are not using the printer for 6 months. I want to help you solve this problem.

  My personal recommendation would be to close to the bottom of the printer, and when you are ready to use the printer, then insert the cartridges.

  If you went ahead and set up the printer, you can store the cartridges and print heads by following this document: storage open cartridges and printheads.

  You can click on the "accept as a Solution" If the problem is resolved and the 'Thumbs Up' for my effort. Please hold me. Good luck!

• Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now

  Never had CS6 so had not yet installed on my system (as part of the first installation) - had CC for awhile and just realized there is not yet - someone knows a way to still get on the road with CC Prime Minister? I looked for days now and the best advice seems to apply to CC 2014 and has to do with installoing a previous version (CS6) of the Prime Minister - but seems not to apply to the CC 2015... HELP - I have plans to burn and don't want to go to third-party software (if I do I'll ditch CC because it won't let me complete my work on a DVD!) @.

  Hi Matt,

  I found this link corresponding to your query, please see if it helps: CS6 still not installed with creative cloud

  Kind regards
  Rahul

• CC will not be listed first installation after that first install would not complete the installation.

  Stopped first installation to 24%, I stopped the installation now first does not appear as an installation but CC said I installed it. I tried to uninstall the first cc and the control panel. All say, "Uninstallation was successful", yet control panel Uninstall programs listing show even the first as an application active and CC does not list the first for me to download. What now?

  Problem solved the representative of Adobe technical support had me download the cleaning tool. That solved the problem.

• Strange first installation problem

  I looked around the answer to that, but nothing helped.

  During my first installation of Windows 7 on the merger, he installed the language of the operating system by default as Turkish, but I noticed that I could drag and drop my Mac on fusion - so almost there, just get installed it in a language I understand.

  I deleted this virtual machine and created another, this time I installed it manually, I don't check the options early in the process, he asked me the usual Windows Installer issues and I choose English as my language.

  After that he had installed it, I noticed I couldn't drag dop points in the instance of merge, then I remembered when he installed inadvertently Turkish, and I checked the options at the beginning of the process, you have a few options of merging the files between the Mac and virtual machine management.

  So now I've manged to install Windows properly, how can I do so I can drag and drop files?

  Also I noticed in the first installation, when I changed the size of the screen he filled my Mac screen beautifully - as if the resolution of the screen had been properly defined. Now, he looks terrible in 800 x 600.

  I am now a little confused.

  If someone could help me? :-)

  Chris

  Hello

  You must install "VMware Tools" to get the drag and drop and beautiful screen resizing back. The first time you have installed (the Turkish era), it was a 'Easy Install', which automatically installs the tools.

  When you do your VM Win7 the second time, it was a plant 'Manual', which does not automatically install the tools.

  During the merger and your Machine virtual (VM) are running, you can install the tools by selecting "Install VMware Tools" in the section "Virtual Machine" on the Mac.

  It should work - let us know if not.

• The first Installation fails after first Boot of the Satellite L750

  Hello.

  I turned on my brand-new Satellite L750 - 04K 010 for the first time tonight (bought new) and start going through the initial setup process for Windows 7 Home Premium. The installation must "Installing devices" and then hung up without activity for about 2 hours, how I decided to restart.

  Then I kept getting the error windows installation has failed and would then need to restart the installation process. The computer will restart but kept coming up with the same error and the loop would continue even once.

  I have not received the installation discs.

  I tried to press F8 to see if the computer repair would work but only gave options to repair the system to a previous state. No Toshiba option was available.

  Help!

  Thanking you in advance,

  Greg

  It's pretty stupid situation now.
  If there is no way to launch the installation of recovery once again I recommend your dealer and ask for help. With other words, ask for the replacement of the laptop.

  What you can also do is to contact the nearest Toshiba service provider and explain the situation. I put t know what they can do for you, but I imagine that you will get a DVD of recovery for the installation of the OS.

  Of course I n don't know what the right solution, but I don't see another option for you.

• Satellite L500-1ZR - battery died during the first installation

  Hello

  I really hope someone can help me.

  During the first time I started my new Toshiba Satellite L500-1ZR battery died and my laptop turns off. I was in the middle of the installation and now when I start it, it gives a word of warning: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation. "However, when I click OK it restarts and I find myself the exact same caveat. I tried F2 and F12 to see if he had options to do a startup repair and also I inserted a disc on which I downloaded a hardware configuration, but it won't work.

  Anyone got some ideas on how to solve this problem?

  Thanks in advance.

  Hi belisu,

  The advanced boot menu, you can access via the F8 key before Windows starts.
  With the F2 and F12 button, you can access the BIOS menu and start.

  So try to use the F8 key to access the Windows Advanced Boot menu and try to start the Windows repair option. It starts from Toshiba HARD drive recovery and restore settings factory.

  Good luck! :)

• First installation on Satellite A500 - 14 k does not end

  Hello world

  I'm French, Taylor my name is, I 26.
  I just got my new PC, a Satellite A500 - 14 k. The first facility started more than 2 hours ago and I still have a blank screen in which it is written:

  "
  Please wait...

  The end of the installation may take several minutes. Do not interrupt the process and do not turn off the computer
  "

  I would like to know if it is normal installation take so long or if there is a problem.
  If there is a problem, what should I do?
  Thanks for your help: o)

  Thibault.

  This isn't a normal life installation behavior seems the laptop hang somewhere
  Try to repeat the installation.
  Simply turn on the notebook, and then press F8, choose repair my computer and choose new window called Toshiba HDD recovery.

  Follow the instructions on the screen and complete the installation.

• cannot revert to English the first installation

  I just bought the M252dw. The first initialization of the on-board display, I touched french by mistake. Now, I cannot complete the initialization process because the led screen instructions are entirely in french. I can't go back to 'home' because pressing on the icon of the House does nothing and the screen is permanently blocked to 'reset '.

  Hi @gene2015,

  Welcome to the Forums of HP Support! I read your post and see that the printer is on the bad language and the printer is stuck on the screen "reset." I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  If you can return to the home screen, if you please, try the following:

  Move the screen to the left and tap the image of the machine.

  Then press the picture of the machine again. (Service installation)

  Then tap the first condition in the list. (Language)

  Select the desired language.

  Then tap Yes.

  If you are still not able to access the settings of the printer, please Contact the HP Support for help. I don't have the reset available for this model. Check the model number and the form to receive a file number for faster assistance.

  Please let me know the results. Thank you.

• FIRST Installation of LabVIEW for robotics 2010?

  
  

  Hi mat3049,

  Could you please after that on the forums of Discussion FIRST located at ni.com/first?  These forums are monitored actively by people involved in the FIRST.  They will be better able to help you with this installation problem.

• EA6500 request router password on first installation

  Implementation of the EA6500 for the first time, it connect to internet by modem, connect it to a computer and start the program installation CD.

  She crosses then a few %, and then he asks a router password!

  But - no default password are anywhere in the box.

  Tried only "password", but does not work

  What is one supposed to write in this case?

  Why is he asking a password at this time when none is given?

  N ° keep this invoice.  So you hard reset the router, connected wire to one of the LAN on your PC, no other device ports.  Hard reset... Press and hold the button of reset for 30 seconds and then release.  Wait 10 seconds and router to power cycle.  Now connect via above using IE on 192.168.1.1.  Status?

• Organize my SSD for first installation / After Effects, your opinions between Mushkin / Samsung PRO 850... ?

  Thank you for taking the time,

  I have i7-5960 x arrives in the mail, it is a huge upgrade for me to sage of the CPU, and I intend to install it on the motherboard ASRock Extreme 4 x 99.

  I have installed ram 64 GB with mono-GPU (Evga overclocked 980Ti) - I also ordered a bolt of lightning ASRock extension adapter to install in one of the PPI.

  with internal Samsung PRO pci 512 m2 will be installed (and hopefully also works!) for my OS/PROGRAMS;

  Now in the light of the information (please do not hesitate to give a few tips if you think that something's going South) above

  I have the options of 3 disks Samsung Pro 850 SSD (1 to) each

  and also Mushkin reactor 1 TB drives coming from another system.

  Now because m2 is expected to be only to win 10/programs installation, I thought I had 3 separate SSD for media (media that I capture) - Render (output) and the Disk Cache

  now I know PRO Samsung SSD are preferred for editing configurations 4 k video, but I also want to save money to change my monitor in the near future, so I want to return

  some of the Samsung SSD if possible.

  I want to ask if I wanted on Raid 0 to increase the speed of 1.5 x times. should I do for media drive, or make it output drive or Cache?

  what player in terms of managing files in Adobe Premiere and AE would benefit more and be more safe if a failure at the top of my head, I think there should be files that I can lose a days work if hds Raid goes down?

  I thought I can keep records of 1 TB of reactor of 2xMushkin in RAID 0 for this player that you would suggest.

  and perhaps just one Samsung drives for others. I'd really love to hear your comments; Even now, I'm sitting on a certain readers, but I want to save money in the long run since Sammy readers are quite expensive.

  Thanks to you ALL

  page Tweakers is a starting point for the advice, but its general advice that may not match your specific needs. some of the information there was written for 7200 rpm disks.

  hackers page says that its important to separate the OS/applications of the media player, so that the windows of standard tasks done constantly in the background is not interrupt reads/writes on the media player when editing. He goes on to say that disk operating system/applications doesn't have to be anything other than an ssd sata. the samsung 950 pro m2 will be only windows boot a bit faster and a little faster, has nothing else once they are open and running of programs.

  scratch disk has several settings for the captured media and rendering of previews. Some people use none and so their installation program does not need a disk separate cache / scratch for first, and they can leave their cache on the disk for the OS/applications. for AE, it will depend on if you have the disk cache. If you are interested in a cache drive, which could be shared with first rendered preview and scratch your files.

  'media' on the page of tinkerers and forums here, almost always refers to camera video files, not video files captured through a map of IO with the first or any other software. If you capture images with a map of IO, there can you want to have a dedicated ssd to it, to make sure that nothing interferes with the disk writes.

  the media cache database files are as creating files for indexing creates to help speed up the playback of files while working with them first. media cache is not the same as zero/capture/preview makes. Bill (forum member) did a lot of tests with disk configurations and also tested leaving media on a sata ssd cache used as disk operating system/applications. He concluded that it makes no difference to performance. so no, there is no need to worry about raid for the first cache files. If you want to use the samsung 950 pro for OS/apps, you can also leave your cache about it. You can even have enough space to use the 950 pro for the cache drive AE and rendered preview files creation too.

  all this is based on the media and what will be done in the timeline, such as screenshots, multi-cam, or preview files. the samsung 950 pro is fast enough to do anything, as long as it fits on the disc. the CT 1 950 pro releasing will see even more people with a configuration to a single disk for everything. other people will be fine with only two ssd sata, one for the OS/apps/cache and other media projects. Some will have more ssd sata or ssd pcie for increasing the speed or the ability to adapt to their specific needs.

• Adobe Photoshop elements 13 and first Installer could not initialize

  I downloaded Adobe Premiere & Photoshop elements 13, but when I go to Set - up.exe it starts to install about 70%, comes it up with "we met the following problems. "Installer failed to initialize.

  I've deleted all my previous download of Adobe elements 12. I'm running on 64-bit Windows.

  Follow the procedure below:

  N ° 1)

  Launch the Task Manager, click on the more details and end Adobe all related tasks.

  Step 2)

  Go to C: > Program (x 86) > " common files" > Adobe.

  Open the Adobe folder and delete folders named Adobe Application Manager and OOBE.

  Impossible to remove? try to rename. as old OOBE.

  Step 3)

  Click on the link below and download Adobe Application manager and install the same:

  http://download.adobe.com/pub/Adobe/creativesuite/CC/Win/ApplicationManager9.0_all.exe

  Once the installation is complete, look for the icon of Adobe Application Manager launch on desktop and double-click it.

  It will start the update process.

  When it is in place, try to install the first and Photoshop Elements and check.

• elements of first installation 13 failed

  The first Elements 13 installation failed!

  Exit code: 7

  Please see specific errors below for troubleshooting. For example, ERROR: DF024...

  -------------------------------------- Summary --------------------------------------

  -0 fatal Error (s), 1 Error (s)

  -Payload: Adobe first items 13 (64-bit) 13.0.0.0 {E76173BC-DC9A-49C3-9B9F-FD7814FC3308}.

  ERROR: DF024: cannot move file in "F:\adobeTemp\{E76173BC-DC9A-49C3-9B9F-FD7814FC3308}\_12734_416cde95844aaa450a1fdd0116adf 932" at '13\System\Premiere.fon F:\Program Adobe Premiere Elements' error 32 Der process nicht auf die Datei zugreifen kann, da sie von einem other process verwendet wird. Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify. (Seq 12080)

  -------------------------------------------------------------------------------------

  Bertram

  Thanks for the reply.

  Although some will write that the user can install the program to other than Local disk C files, there are often problems (installation and otherwise) If you do not install to the Local disk c. and there are program files that will install in a default location beyond your control.

  In the situation you describe... I would like to uninstall the program, make a free ccleaner cross to get rid of remnants of uninstalls / reinstalls incomplete, and reinstall the program in the default location on the Local C drive (with antivirus and firewall disabled.)

  Free download CCleaner - optimization of the PC and cleaning-

  Also, think about the locations of Scratch and records the amount of space available on these sites.

  Please see Edit Menu/preferences/Scratch disks... these can be directed to a hard drive with plenty of space, if hard disk space is a problem.

  Working with "scratch disks"

  Please consult the bulletin and consider and let us know if the program files to disk Local C solved all the questions that you have declared.

  Thank you.

  RTA

• First installation of VSA - placement vcenter

  Hello

  I'm looking for VSA configuration for the first time with 2 new servers ESXi 5.1 headquarters x and 1 x new 5.1 ESXi server in a branch.

  The plan was for (windows) reasons to put the Vcenter server at the license branch.

  We are looking to create a VSA cluster headquarters

  I had a few questions about the installation: -.

  • Some guides have said servers require RAID 10 - is this a requirement or can get away you with RAID 5 in smaller environments.
  • I read that its better to have the vCenter outside the cluster, but I also hear that you can't manage the cluster from a subnet of difference. I'm not sure what is best here!
  • Could I use a VC and install the cluster service VSA on the vMA to avoid having to build a virtual windows machine? No doubt, I would need still to install the Manager of VSA on a VM in tbe-branch of windows.

  I'm grateful for any advice on any of the above requests?

  See you soon,.

  Huw

  1.0 required VSA VC be in the same subnet as the cluster.  We lifted this restriction in 5.1.  The Victoria Cross can be anywhere, in the Branch Office, in the main office, etc.  And in 5.1, we now allow up to 150 clusters be managed from a single instance of VC

• RETURN IN H264 CRASH... BUT NOT FROM THE FIRST INSTALLATION

  After many uses, the export of a 4 min clip my adobe cs6 installation video blocks when I chose H264 but with the same rendering project (my material is MOV of CANON 70 d). I reinstall the entire operating system WINDOWS 7 64 and CS6 ADOBE CREATIVE SUITE full and the upgrade of the internet. I use QT 7.7.5 full version. Can someone help me? I use an i7 3770 k with nvidia gtx 470 with select CUDA acceleration in first pro. Also, if I use SOUL I have the same problem. (sorry for my bad English)

  THE FIXED!

  Was exactly what I thought, an overheating problem. Bought a cooler extra fan and change the thermal paste on the CPU and now the temperature remains cool and stable. Recently a 4 minute video 1080 p 30 fps very edited to the H.264 format in less than 5 minutes without any reboot crash or computer, and great video.

  Thanks for everything, hope this can help others too.