Satellite L505-13W shows error blue screen

Similar Questions

• Satellite L505-13W BSOD error

  Hello guys,.

  Thank you all for helping me on the last thread.

  I intalled a new copy of Win7 ultimate on my PC now.

  But now it shows BSOD... on the following questions...
  I can't understant what the problem with my knees. The issuues are noted below.

  IN CAR IRQL NOT LESS OR EQUAL.
  PAGE FAULT-IN-NO-FAULTS AREA.

  Please help me if someone has the solution...

  Thank you.

  Didn t you solve the BSOD issue here in this thread?
  http://forums.computers.Toshiba-Europe.com/forums//thread.jspa?threadID=67135

  You got the BSOD using the preinstalled Toshiba system?

• Re: Satellite L505-13W - black screen on the camera built-in

  Guys, pls help me to fix my camera built-in.

  My webcam screen turn to black. don't know why? his work, but I don't see anything...
  I have already installed the driver, there need, but nothings happened. Before that it works well but when I reformat, I do not know now. My unit is Satellite L505-13W and my integrated camera model: USB2.0 UVC webcam...

  Please help me. Thank you!

  Hi val_mactal214,

  Maybe this article can help you:
  [How to change the settings for the built-in webcam If the image is very dark or black? | http://forums.computers.toshiba-europe.com/forums/ann.jspa?annID=59]

• Satellite L450D-128: how to fix intermittent errors blue screen Crash?

  My computer suffered several errors blue screen for a month, and I need help to fix it. I've already posted this question on the forums of Windows 7, but received no reply and therefore no help.

  I use a Satellite L450D-128. I installed Windows 7 Home Premium 64-bit.
  According to the .dmp files, most of the accidents were caused by the ntoskrnl.exe file that is part of the windows OS.

  Can someone tell me the best way to look at/fix this file?

  Hello

  The ntoskrnl.exe seems to be part of the kernel to boot Microsoft.
  In my view this file or this process should not create a BSOD
  Have you checked if the new installation of the OS could solve this problem?

  Given that the BSOD may be linked to serious problems or hardware problem
  Therefore, you should try new fresh OS installation to check if the system is not affected
  Otherwise I recommend that you check the RAM modules (perhaps running a memtest86 +)

  What do you think of this?

• Photosmart HP B210a more: HP Photosmart Plus B210a shows a blue screen with error B8145558 and restart.

  For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.

  Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.

  So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.

  Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?

  Hi @kootstra,

  From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.

  I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.

  This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.

  There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers.  Reset to will sometimes fix problems, so resetting is not the issue.

  A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access.  These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results.  A wrong button push and you might no longer have a printer, but rather an expensive paper weight.  On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!

  Reset the printer: what you need to know

  Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.

  

• Satellite A300D-1EI - error blue screen display - drivers did not have

  I bought my laptop about a month ago.
  Everything is working great except two errors 'blue screen' caused by the graphics card.

  Both were when the laptop was connected to the TV via the S-video port.
  First was when the computer screen turns off after 15 minutes while watching a movie on resume says that the display drivers did not have, and then I got the blue screen. Then I updated the site Web of ATI display drivers and set the computer screen goes out.

  All were ok with no problems, until last night when I got another message that the display drivers did not follow a blue screen.

  I wonder if this is problem to drive or there is a problem with my graphics card.

  System information:
  Processor: Intel Core 2 Duo T8400 CPU @ 2.26 GHz
  Memory (RAM live): 3.00 GB
  System type: 32-bit Windows Vista Edition Home Premium
  Graphics card: ATI Mobility Radeon HD 3470

  If long you use ATI driver ATI support page it is not possible to say anything on this subject.
  This driver is not tested and Toshiba does not offer any help on this matter.

  So what you can do is to install OS using recovery media and see what will happen in the future. Please test extensively with the own operating system preinstalled. Do not install anything that can have some negative influence this game or additional applications, codecs or something similar.

  Test it please and tell us if the problem persists.

  When you want to watch movies on television in the first passage to the TV and then start the DVD player.

• Satellite L505-13W - FN keys were not and touchpad problem

  Hello everyone,

  I have two questions and I'd highly appreciate your help.

  First, when I got the laptop he used to have a Fn bar that comes down from the top of the screen when I press the Fn, it shows all the keys Fn, now it disappeared. I need to get it back, I almost tried everything and nothing is there yet.

  Second, the touchpad is a zoom no more when I apply the 2 fingers in and out, he used to do that before.

  My laptop is Satellite L505-13W

  Thanks in advance

  Hi abdouni,.

  1. I think that the problem is related to Toshiba Value added Package, and Flash Cards Support utility. These two tools control FN keys and cards Flash appears if you press the FN key.
  You can download it from the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com > support & downloads > download drivers

  Regarding the installation: first remove these two tools and reboot the laptop. Now, install the package of added value and stop and start again. Install the Flash Cards Support utility and do a restart. Now, the FN keys should work again.

  2. it could be related to value added package too to check my ad.
  If it s does not work, reinstall the driver for the touchpad.

• Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  STOP: 0x0000007e (0xc000001d, ox8537008 0xba4c3508 0xba4c3204) and the system would not come to the top.

  Error blue screen STOP: 0x0000007e. I powercycled the sys, unable to choose for sure (keys do not work when you try to select a mode) sys is trying just to go back to the blue screen. Help, please

  Symptoms: Booted computer, loaded the raid drivers and showed at the start screen XP for half a second then to BSOD with a Stop error Code 0x0000007E - see also a lot of users (0xC0000001D, 0 x-, etc.) as well.

  Solution:

  1 boot from your Windows XP CD and start the recovery console. You may need to press F6 while RC loads in order to load the SATA drivers. you will have a prompt c:\WINDOWS to the console.

  2. type: CD $NtUninstallKB977165$ \spuninst (it's the update, I had to uninstall to get out of the boot loop, other updates can be uninstalled by changing the name of the directory to $NtUninstallKBCODE$, where KBCODE is the code KB)

  3. type: BATCH spuninst.txt

  4. type: exit

  Don't forget to configure your system to boot from the HD before resuming. I hope this helps. Saved me a lot of hassle today.

  -Tom Steele
  http://www.hawkandtom.com Tom Steele

• PC restarts showing a blue screen and ATI RADEON XPRESS 200 graphics works only with WINDOWS 7

  (1) I have a motherboard integrated ATI RADEON XPRESS 200 SERIES
  I installed the 64-bit windows 7 but everytime I use, it shows a
  BLUE SCREEN and instantly gets restarted.

  ERROR INFORMATION
  
  Problem event name: BlueScreen the system Version: 6.1.7600.2.0.0.256.1
  Locale ID: 16393 BCCode: 1 BCP1: FFFFFFFFC0000005 BCP2: FFFFF960000D69EA BCP3: 0000000000000000 BCP4: 0000000000000000
  OS version: 6_1_7600 Service Pack: 0_0 product: 256_1

  Pls explain why this happens n solution for this?
  
  (2) I downloaded the latest updates for microsoft video card, but they are in the form of files * .cab, can someone explain how to install them.

  With the Xpress 200 integrated graphics, you will not be able to get Aero or other effects of Windows 7.

  You can adapt a motherboard graphics card: AGP or PCI-E slot there. A Radeon 3400 or other card compatible Windows 7 can be pretty cheap and would provide Aero and other effects of Windows 7.

• First Pro CC launch my computer shows a blue screen: kernel security check failure

  Hi all

  Plug-in for some time Adobe Premiere Pro that I like a lot. It works on my laptop Asus on Windows 10. But since yesterday I can't launch it! Every time I run Adobe Premiere Pro my computer stops on saying a screen blue "your computer to encountered a problem and needs restart." We simply collect information etc."is the error: kernel security check failure. So I used the software, which crashed to see because of what program my computer shows a blue screen. After scanning my computer it says that the problem is probably caused by ntkrnlmp.exe and ntfs.sys

  I therefore seek a solution on forums but I've never found! I tried to update my vain pilots en and I also tried to reinstall Adobe Premiere Pro but its didn't work it still shows the same error.

  Thanks in advance for your help

  Kind regards

  Mathys

  Hello

  I just found this on a Forum:

  Good night «»

  After the words... just restore your graphics driver to the previous version, wait that Microsoft developers to create a new kernel update, pour the update your graphics driver.

  As of December 25, 2015

  Friendly. "

  Hopefully this can you help accessory!

• Re: Satellite L505-13W - hardware upgrade

  Hi all

  I specified model
  http://www.Toshiba.EU/discontinued-products/satellite-L505-13W/

  and I want to use the design program rhino3d v5.

  Minimum specifications of the program can be found here:
  http://www.simplyrhino.co.UK/rhinotraining/hardware.html

  The practical system minimum requirements are:

  Intel Core i5 Quad Core AMD 4400 equivalent or
  8 GB RAM
  500 GB HD
  Open GL graphics card
  Windows 7 64 bit

  Are there opportunities that I can upgrade my laptop to be able to use the program (ram, ssd, the graphics card)

  or is it a laptop?

  You can upgrade the RAM and HARD drive. Upgrading CPU is delicate and not supported by the laptop manufacturers. Graphics card can not be upgraded.

  Satellite L505-13W was equipped with an Intel Core i5 - 430 M 2.26 GHz (2 cores) processor
  You can also upgrade the RAM up to 8 GB of RAM and the HARD drive can be also updated to your preferred size.

  Minimum requirements of the system suggested practices are very similar to the laptop hardware specifications, and I think that after the upgrade of RAM, you should be able to run the application.

• Satellite L505-13W - how to bring 64-bit to 32-bit

  I bought this laptop (toshiba Satellite L505-13W) with 64-bit operating system preinstalled with OS 32-bit recovery dvd backup.
  Can I change all of a sudden, rather to convert my OS 64-bit for 32 bit OS in the hope that I can install back my 64-bit but I just made a recovery from my creator of media recovery, but when the time I want to install back once again, my 64-bit unfortunately impossible to install back my midea of recovery...

  I just want to know if I could recover original may OS 64-bit download driver nested and installation of back to use again.

  Hello

  I recommend trying the HARD drive recovery procedure:
  http://APS2.toshiba-tro.de/KB0/HTD1303440001R02.htm

  Welcome them

• Chromebook 11 - error blue screen bsod system 895 32. exe how can I get rid of this? screen cannot be deleted.

  Chromebook 11 - error blue screen bsod system 895 32. exe how can I get rid of this? screen cannot be deleted.

  [Moved from Virus & Malware]

  In case you see something similar...

  

  (photo source: https://malwaretips.com/blogs/remove-debug-malware-error-895-system-32-exe-failure-popup/ )

  ... you can normally just use the Task Manager to exit your browser (' end task'), and the pop-up should be gone. Please visit: http://answers.microsoft.com/en-us/protect/forum/protect_other-protect_scanning/potential-malware-blue-screen-with-dialog-box-on/3569bb1b-c05e-4247-98dc-6bf22da581e0

• 116 error blue screen (1557 DELL i7)

  original title: blue screen (1557 DELL i7)

  Signature of the problem:

  Problem event name: BlueScreen

  The system version: 6.1.7600.2.0.0.256.1

  Locale ID: 1033

  More information about the problem:

  BCCode:                                              116

  BCP1:                                                   CF644008

  BCP2:                                                   91A3DB86

  BCP3:                                                   00000000

  BCP4:                                                   00000002

  OS version: 6_1_7600

  Service Pack: 0_0

  Product:                                              256_1

  Files helping to describe the problem:

  C:\Windows\Minidump\071110-14508-01.dmp

  C:\Users\BAHMAN\AppData\Local\Temp\WER-30404-0.SysData.XML

  Read our privacy statement online:

   http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409

  If the online privacy statement is not available, please read our offline privacy statement:

  C:\Windows\system32\en-US\erofflps.txt

  Best Rigard (Bahman Hosseini)

  Hello

  Best chance for a quick solution is to check with the manufacturer of device video and Dell to updated
  driver (or re-install those present).

  Check with Dell technical support, online documentation and drivers and their known forums
  issue.

  Dell support
  http://support.Dell.com/

  Dell support drivers - product manual & warranty Info (left side) - and much more
  http://support.Dell.com/support/index.aspx?c=us&l=en&s=DHS

  Dell forums
  http://en.community.Dell.com/forums/
  ----------------------------------------------------------------------------

  Check this thread for more information on using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - first two responses.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/8df6485a-50cc-4cdc-BE3E-0f05c7745117

  ---------------------------------------------------------------------------

  Have you updated your screen/video or other large recent drivers - check in Control Panel.
  Updates of Windows to see if a driver has been loaded it. Use this generic utility below
  and when you get to the section driver use the methods in the next message and then back to
  the troubleshooter as needed. In rare cases, antivirus/antispyware/security programs can
  cause this error.

  Also check with the support of system Maker and video/display of the map because he could be called
  questions - also check in their forums.

  BCCode: 116 0 x 00000116

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This indicates that an attempt
  to reset the display driver and recover a time-out has failed.

  BCCode: 116 0 x 00000116<-- read="">
  * 1275.html http://www.faultwire.com/solutions-fatal_error/attempt-to-Reset-the-Display-Driver-and-recover-from-0x00000116-

  --------------------------------------------------------------------------------

  Inclusion error code 116 in the resolution of problems is the only coincidence and has no specific
  which means (other than the driver caused bluescreens occur with some frequency).

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard event viewer
  Windows. TIP - Options - Advanced filter allows you to see a time rather
  of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
  RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker
  (SFC.exe) program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all the)
  possible driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• NMI:Parity error blue screen

  I have problem with blue screen with any program at any time. It is as it should be a hardware problem. When I run the Diagnostics on my computer everything seems to check out OK.

  Hello drichardson3,

  ·         You get this error blue screen randomly on your computer?

  ·         What exactly is the diagnostic test that you have run on the computer?

  The checking of NMI Parity error is an error related to a defective hardware on your computer. This is mainly caused by a faulty RAM.

  To resolve this problem, you may need to check on the RAM, I suggest you contact the manufacturer of your computer to check the hardware that does not work properly.

  Thank you
  Irfan H, Engineer Support Microsoft Answers. Visit our Microsoft answers feedback Forum and let us know what you think.