First Pro CC update failed

Similar Questions

• First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please

  First pro cc application failed to start properly (0xc000001d) click on OK to close the application. I get this message after update software. Help, please!

  Hi RC,.

  Update first Pro CC 2015 (9.2).

  Thank you

  Kevin

• First PRO CC subscription fails

  Hey guys, I was using first PRO CC for almost 2 months now, and on 8 December, the payment does not pass by (have no money at that time) so I updated my payment options and they took the money now. BUT now I can not access my editing software. Also, I finished a project last night, it said my trial was over. I'm so confused. With whom can I contact because I can't find all the numbers to call. Help, please. Thank you very much

  You must contact Adobe personnel to help

  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)<=== note="" days="" and="">

  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• First Pro CC2015 update: no reading and the program hangs at the end

  I just updated my first Pro CC2015.  I can't get any video for playback at all within the program, and when I eventually leave the program it just freezes and I have to force to leave.  I use an end of 2013 Mac Pro, 3.7 GHz, 32 GB of Ram.

  It seems that he was trying to use my Logitech camera as input device and I couldn't change other parameters.  As soon as I got the Logitech camera - reading has worked well.

• black screen in the window of the program after the first pro cs6 update.

  I worked several months without any problems before this update... Now I can not find which version I had before...

  I have a black screen when playing and the screen of the program after the first pro 6.0.3, 6.0.4 cs6 and 6.0.5 update.

  Reading appears when I turn renderer for CPU, but I have tons of projects already rendered GPU and it slowes my work down.

  I can't use 6.0.0 and 6.0.1 because there is no support CUDA for my GT650M and there is no 6.0.2 for Windows

  What am I supposed to do?

  I followed on my Dell 7720 material:

  Windows 7 sp1 64-bit

  CPU i7-3630QM

  16 GB of ram

  Graphics Intel HD 4000

  NVIDIA GeForce GT 650M

  FINALLY I FOUND THE SOLUTION!

  This problem appeared after Premiere Pro cs6 update 6.0.5. and Nvidia graphic drivers at 320... then 331,65. Reading CUDA started working correctly when I reinstalled the graphics drivers Nvidia 307.07 old. It was very unsupposed problem. NEVER DAY drivers and the system until that your projects are completed!

  Thank you very much for the help!

• XP Pro sp3 updates fail

  Updates are set to notify and in recent weeks when the icon is clicked on a page with a list (of long) is presented and when you click it to download a few seconds the router activity ago then the action stop and the icon disappears.  Updates fail.  A time later same updates are presented again.  Anyone know how to remedy this.

  Some updates are: KB2888505, KB2858302, KB2596615, KB2596672, KB2596785, KB2687311, KB2687499, KB2760416, KB2596843, KB2510531 and KB2596848.  Some of them appear old enough so I don't know what gives.  Until this problem started, the machine was up-to-date and updates were install normally.

  If a manual update is requested check page shows no activity or is running continuously.

  Thank you, John.

  Your instructions helped me to start good SONGS.  Properties of BITS came as shown with the current runtime.  Was able to update of 16 of the 17 updates.  .NET framework 4 failed (KB2858302v2).  .NET repair tool does not accomplish a repair so I downloaded a new copy of .NET and installed in repair mode.  The last update then installed successfully.

  Now, everything's fine.  Thanks a lot for your help.  John.

• First Pro CC updated with the optical flow?

  Since around November, Premiere Pro has been updated with optical flow, what I'd really like. My application was not being updated, yet, I wonder why? Current build 9.0.2 (6) and I can't force update, it says that it is up-to-date. It is impossible.

  Kind regards

  Thomas Nissen

  If you have already tried "Check for Updates App" and you're still not current, please try to uninstall the creative Office Cloud app using the directions and the uninstaller available here: uninstall the Adobe Creative Cloud desktop application. You don't need to uninstall your other apps, just the desktop application. Once the creative cloud desktop application has been removed by using the uninstall program, please reinstall by following these instructions: use of the desktop Adobe Creative Cloud to manage your applications and services application

• First Pro CC encoding failed because of a low level exception occurred in: color of Lumetri (AEVideoFilter)

  Trying to export the video to DVD (MPEG2-DVD) format... He began to make video 'normally' up to 10-50 minutes... Tried several times, the modified video quality and output training has changed, always stop with the same error code.

  Is there something to do... ?

  -Encoding Time: 02:22:33

  26/06/2015 21:40:48: encoding failed

  ------------------------------------------------------------

  A lower-level exception occurred in: color of Lumetri (AEVideoFilter)

  Export error

  Movie compilation error.

  Unknown error.

  Hello

  If you have a solution that you have found, please return to the thread and let us know. We can only assume that you have solved your problem. In general, you will get these types of errors when you exhaust the system resources such as VRAM, RAM memory, or both.

  The solution or workaround is to use software mode only for the Mercury playback engine. You can also buy additional equipment that can help the work.

  Thank you

  Kevin

• More news from the new first Pro/AE update shown at NAB?

  I'm sorry if this has been asked, but Googling, there is no recent news I could find! Have an ETA on the new updates?

  Hi BYarsulik,

  I'm sorry if this has been asked, but Googling, there is no recent news I could find! Have an ETA on the new updates?

  No, we never announce our release dates in advance. I'm sorry.

  Kind regards

  Kevin

• Why not first pro cs6 update. ?

  I downloaded the patch but it will not install and the program said: there are no updates available

  Good for recording so I downloaded the new Adobe Application Manager, then installed CS6 yet who was the 6.0.0 version then managed to install the extension connector for the eyes of the plural and also update to the new version, so

  See you soon

• I don't see the Ripper group in first pro after update 20141, and 2014.2 has not been set.

  

  Please someone help me to solve this problem, I'm literally crazy that I have to change in my address and I am constantly hanging up to different monitors, claiming a different workspace from most of the time. Thanks in advance.

  To be clear, I can't see the Ripper of group and therefore having to reset my workspace everytime I want to anchor a group of panels not anchored.

  You are right. The ability to move a panel group has been removed as part of the redesign of the user interface which started in CC2014.1. I'm bored, too. If you are so inclined, you can submit a request/complaint to the www.adobe.com/go/wish.

• Impossible to download first Pro CC of the creative cloud App

  I downloaded successfully Illustrator and Lightroom using the app, but when I try to download first Pro CC download fails near the end of the download each time. Now, he offers me an update to download but it fails also, and I don't have the option to retry the original download. When I clock on the error button it now says "another instance of Setup is running. Wait that it finished, and then try again (U44M1P36), but I don't have any other downloads running through this application.

  Thank you

  Hi Emma,

  Please check the help below document:

  Error U44M1I210 | Install updates

  Kind regards

  Sheena

• Error 643 - updates Fail - OVER and OVER

  For months, since the upgrade to Windows 7 Pro - night updates fails (error 643) for the security of Silverlight Silverlight (KB2416427) (KB978464) and Social Connector (KB2289116). Please tell me how to fix!

  Hello

  ·        Have you installed Sliverlight on the system?

  I suggest you to run some Surinamese check check the article mentioned below.

  Description of the preparation tool system update for Windows Vista for Windows Server 2008, for Windows 7 and for Windows Server 2008 R2

  http://support.Microsoft.com/kb/947821/en-us

  I suggest you follow the steps mentioned below.

  Method 1:

  Step 1:

  I suggest to uninstall the updates you mentioned in the post (if installed) Windows updates and download updates from the links below and save it to the desktop.

  Description of the update for Microsoft Silverlight: 28 September 2010

  http://support.Microsoft.com/kb/2416427

  http://www.Microsoft.com/getSilverlight/get-started/install/default.aspx

  Update of security for Microsoft Silverlight (KB978464)

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=7e3f6c16-1339-49bc-A60C-ddc6c3a54850&displaylang=en

  Update for Outlook Social Connector (KB2289116), 64-bit edition

  http://www.Microsoft.com/downloads/en/details.aspx?FamilyId=029d7644-5f50-4ae0-A8D2-0acd605e2980

  Step 2:

  I suggest you perform a clean boot. To perform a clean boot follow the steps mentioned in the link given below.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: Follow step 7 to start the computer in normal startup.

  Step 3:

  Install the updates on the system.

  Method 2:

  Reset windows update components and check. Follow the steps mentioned in the article below.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058/en-us

  Thanks and regards.

  Thahaseena M
  Microsoft Answers Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• The recent release of first Pro CC still has bugs:)

  First Pro CC track matte questions - YouTube

  Premiere Pro CC Interlacing issues - YouTube

  The recent first Pro CC update has not resolved questions of bug I reported. I wonder if the bugs can be fixed or not.

  Super sorry for these questions, Andy. I have a bit of good news, if.

  1. The question of mast track is scheduled for a fix in the next major update.
  2. The issue of interlacing is scheduled for a fix in the next update.

  As far as the 3D rotating bug goes, I found an intern who has been closed a long time ago. I don't think it will be fixed for the following reason: you can already achieve the effect using different techniques.

  When it comes to most of the problems you describe, it's usually a matter of rendering pipeline that requires a change. To change the order to make pipeline is done by nesting. The clip of the scale, nest, and then add the 3D effect. It should work fine then.

  As an alternative, Premiere Pro has a video effect that acts as a motion effect, so that you can avoid nesting: transform. Just add the transform effect and change the stacking order of the 3D effect of pivot lower for this purpose. In fact, this seems to be preferred between the two.

  Kind regards

  Kevin

• Having trouble getting first pro clips cut into compositions

  I'm working on a mashup of TV intro in the style of happy days to see the tv with another Publisher.  I'm a complete noob with sequelae.  I have never used before for anything.  The other editor has created the model in the after effects of the turntable with the player intros compositions in the center of the disk and sent the project.  He created a composition for every character intro and I'm trying to get in and replace the clips which he used as place holders with clips that I cut in first pro.

  As a first step, I managed by dragging the first pro sequence in the after effects project.  Then when I looked at the composition of the sequence, I could see the trimmed clips and could copy paste clips I wanted in their compositions respective intro.  I noticed the first time, I imported the sequence in AfterEffects and make the changes in first pro it updated in real-time.  Now all of a sudden the changes I made to the first pro sequence is more updated of sequels.  What's weird, it's update to the extent if I watch the sequence in after effects viewer I can see the changes, but on the scenario where the clips are arranged the changes are not reflected and it shows me a previous version of the sequence.

  So my two main questions are

  (1) how is the line time in legacy is no longer updated is the changes I make to the sequence in first pro?

  (2) what is the best way to get trimmed first pro clips in after effects compositions?

  Question 1:

  Since you're so new to AE, it is quite possible that a number of things that happened without realizing you it. This and you have given a lot of information for troubleshooting I mean, we don't know yet the raw versions you use, much less minor version numbers. (For example, we do not know if you use CC 2014, much less if you run the update 13.2 for AE or not.) Here is some info that we need to help: http://forums.adobe.com/thread/961743

  http://forums.Adobe.com/thread/961743

  Question 2:

  You can choose file > Import Premiere Pro Project and he'll bring the clips. It does not update, but it will give you the items you need in a way that is easier to deal with EI.

  Alternatively, you can choose to dynamically bind a first project (which resembles what you initially). In most cases, I prefer the first way.

  Since you have never used before AE, there will be a lot of things that frustrate you if you try to plow ahead without knowing the basics. I highly recommend you to go through the resources linked here: granted starting After Effects , there is a wide range of resources, but that's because EI is such a deep and complex program. Without a foundation in the basic principles, you just want to keep to be frustrated.