First Pro CS 6 and Windows 10 - projects do not play in the timeline

Similar Questions

• Windows DVD Maker will not play on the TV DVD player

  I have Windows Vista, and Windows Movie Maker to make a movie. I've published using Windows DVD Maker. I've made several copies and sent to various members of my family. While I was able to watch them when I tested them on my TV dvd player, none of my family members are able to watch their copies on their dvd players. In addition, when I insert the dvd in my computer's dvd player, it won't play either. How can I fix?

  Thank you. What I did just check "ffdshow" configuration and found that the codec for mp2 was disabled, so I let him. Now when I load the dvd into my computer it starts automatically.

  Now, my question is that I have to burn the new dvd for my family, so they can watch on their dvd player TV? Are their other codecs apart from that I have activated that must be adjusted so that DVDs can be found on other dvd players?

  ======================================
  You didn't say if you have a folder VIDEO_TS on the DVD...

  OK... you say you can play DVDs on your freestanding
  DVD player and on your computer. Startups that appears
  DVDs are fine and the problems of members of your family
  need to be cleared up on their end.

  One thing I would try would be to publish the project as a
  .wmv movie file in a folder on my hard drive. Then I'd
  the following freeware to create a video DVD. There are
  a small chance that it would work better for you.

  (FWIW) It's always a good idea to create a system
  Restore point before installing software or updates)

  DVD Flick
  http://www.dvdflick.NET/

  Be sure to read the Guide:
  http://www.dvdflick.NET/Guide.php

  If you have problems to download DVD Flick...
  Try the following direct link:
  http://tinyurl.com/yzx9sck
  or...
  http://downloads.sourceforge.NET/project/dvdflick/dvdflick/DVD%20Flick%201.3.0.7/dvdflick_setup_1.3.0.7.exe?use_mirror=SoftLayer

  Save the file to a folder on your hard drive and
  install from there.

  Tutorials:

  Tutorial DVD Flick
  http://beginwithsoftware.com/videoguides/DVD-flick-Guide.html

  Burn any Format video DVD PC
  http://www.freevideoworkshop.com/dvdflicktutorial.htm

  To create a video DVD base that should play in a free
  permanent drive DVD... try the following...

  First... read the DVD Flick Guide to familiarize
  with the program.

  Open DVD Flick and insert a blank DVD in your drive.

  If the window of Autorun from your computer... just close it.

  Click the project settings button and check... Video /.
  Target format... residents United States... Choose... NTSC /.
  Accept.

  The title button left click Add and navigate to your
  Video clips and select the ones you want on the DVD.

  You can have by selecting one and then use
  the up and down buttons.

  Left click on the button create DVD / OK / Yes / Yes.

  Please wait while the DVD is created.

  When the text "Completed successfully" is displayed you
  DVD Flick can close. Now you can eject your DVD
  and play in your DVD player.

  At some point you might want to buy more
  Advanced Cyberlink, Nero, Roxio, software
  Ulead, etc... but at least it is a start.

  Good luck. John Inzer - MS - MVP - Digital Media Experience - Notice_This is not tech support_I'm volunteer - Solutions that work for me may not work for you - * proceed at your own risk *.

• No video will not play in the timeline of the program or window Source

  NVIDIA 675MX

  NVIDIA Driver 359.06 (version 361,43 crashes when opening first system)

  Windows Home 64 bit (latest updates 1.24.16) 10

  First generation CC 2015.1_v9.1.0 (174)

  32 GB of RAM

  Intel i7-3630QM 2.40 Ghz

  I'm not able to get the video to play in the front. When I tap on the bar spacing or play, the playhead button is not evolve somehow.

  No one knows what might solve this problem?

  All updates are completed except for the Nvidia 361,43 driver, which crashes my system if I try to open the first.

  Thanks for your help!

  These figures indicate a laptop... If you have by chance of the double video adapters?

  Go to the Windows Control Panel and select hardware and sound, and then select Device Manager... In Device Manager, you click on the sign to the left of graphics cards... + and see if the 2 are listed

  IF SO, read below

  -http://forums.adobe.com/thread/1001579

  -Why link http://forums.adobe.com/message/4685328

  -Use the BIOS http://forums.adobe.com/thread/1019004?tstart=0 to select a graphics card

  -http://www.anandtech.com/show/4839/mobile-gpu-faceoff-amd-dynamic-switchable-graphics-vs-n vidia-optimus-technology/2

• Videos on Hulu and other video sites do not play in the list.

  Videos on websites like Hulu and NBC do not play. Sites load very well, and in fact ads loading fine. But when it comes to video, nothing comes at all, just black. Finally an error like "could not go video right now."

  YouTube DOES not play very well. No problem with Youtube.

  All these videos play perfectly on Safari.

  I tried uninstalling and reinstalling flash and opening in 32-bit mode.

  I have a newer iMac running OS x 10.6.8. My Firefox is updated.

  I realized my problem. I have the Little Snitch program, and he refused a plugin container. I guess I accidentally said refuse once. Went in and changed the game settings and video very well now.

• His Windows logon (7) does not play when the computer starts with the automatic logon.

  If I understand my Internet search, that this is a classic problem with Win7 and Vista I had my sound connection at startup of the computer each time. It comes, of course, with the sound of starting Windows (i.e. before opening of session) disabled.

  When I log out and then log in again once I get acoustic logging, so the question is about the AutoConnect at startup.

  I would really like to know if there is any small hack or trick that I could use to allow me to get a sound at startup to logon without having to connect.

  NB. There is no security issue on automatic logon, because it is a home computer and I live alone.

  Thank you very much
  Philip Goddard.

  I'm having the same problem, I think I'll call dell and see what they say, I integrated 5.1 audio so I guess that there is no sound card. I'll post my results

• Windows Media Player will not play a. MOV file

  I have a new Dell laptop with Windows 7 Professional and Windows Media Player will not play a '. MOV' video file completely (the video but not sound). I am told by Microsoft Windows Media Player will not play a MOV file, and I need Codec VLC add on or another player who will play MOV file. What is the best solution and if its for download a Codec VLC, then what is the best source?

  Guess why?  [ :-) ]

  Types of files supported by Windows Media Player:
  https://support.Microsoft.com/kb/316992

  Which was probably that there was a lack of understanding between the container file and the codec here (in November 2013).  He says he's a "MOV" does not mean that he plays with the same codecs as all other MOV files.  ;-)

  It is perhaps a better place to read up on this:
  http://www.Dr-lex.be/info-stuff/mediaformats.html

• Windows Media Player will not play cd but show no errors

  Windows 7 Windows Media Player 12 - previously would play music CD (purchased at retail, not burned) that I inserted in the CD/DVD/BD drive very well.  Now, whenever I put in a cd it seems to read the info of the cd (album, artist, title), but when I try to listen to a song, I see a red X.  If I hover over the red X is see "Windows Media Player has encountered an error.  Click the icon for more information. "When I click the icon I see simply a box that says"Error Details"and nothing more.  How to solve this error?

  Thanks for the reply very detailed with several suggestions.

  There are several known changes made to my computer since the last time I played a CD.  These include some Windows updates (which have been applied automatically during the stops), a Java Update, an update of Adobe Flash and possibly others that I don't know or don't remember.

  I was a bit confused about whether it was a hardware problem or software, because Windows Media Player seems to read at least part of the ok CD to get the album and track information, but could not play all the tracks.  Just before I read your suggestions, I tried something to isolate if it was a problem with Windows Media Player or a CD drive problem.  I opened iTunes was already installed on my computer and previously used to play music stored on the hard drive (but has never been used to play music directly from CD).  I inserted a CD with Windows Media Player could not play and iTunes has played the CD fine.  I closed iTunes and then reopen Windows Media Player and now he can play any CD just fine in Windows Media Player.  I am happy to say that everything seems to work fine now, but I have no idea why the problem disappeared after using iTunes when I could re - create the problem at will before that try to play all the CD with Windows Media Player.

  As a last test, I put a known "damaged" music CD.  It acts like the previous problem - i.e. can read/display the info of the album and the way tracks but cannot read any track, shows the red X next to each track he's trying to play, and by clicking on the red X opens a box that says "Error Details" and nothing more.  It would be nice if it gave an error code or a more descriptive message.

  Thanks again for your response.  We can close this thread because my problem disappeared mysteriously.

• I bought the first Pro 5.5 and downloaded/installed on my desktop.  Recently upgrade to Windows 10 wiped out all my apps from third parties including first 5.5 Prop.  How cn I re - download to reinstall?

  I bought the first Pro 5.5 and downloaded/installed on my desk several years ago.  Recently upgraded to Windows 10, their upgrade glitch locked up and everything and forced me to re build-in the process it has wiped out all my apps from third parties including first 5.5 Prop.  How cn I re - download to reinstall?

  Download & install instructions https://forums.adobe.com/thread/2003339 can help

  -includes a link to access a page to download the Adobe programs if you do not have a disk or drive

  -you will need to enter your original serial number during the installation for non-Cloud programs

  - or kglad links in response to #1 here can help https://forums.adobe.com/thread/2081216

  Also go to https://forums.adobe.com/community/creative_cloud/creative_cloud_faq

  - and also read https://forums.adobe.com/thread/1146459

• I use first Pro CC on a Windows 7 Desktop and burn a DVD

  I use first Pro CC on a Windows 7 Desktop and burn a DVD. I know still is not available on the CC, but it's about CS6. However, I can't find Premiere Pro CS6 on my Apps CC page.

  How can I burn a DVD?

  According to this page: https://helpx.adobe.com/encore/kb/encore-cs6-installed-cc.html

  I should be able to download CS6 (to access yet) but I can't seem to find it.

  Any suggestions?

  Shoot me an email at [email protected]

  Thank you.

  All files must be in the same place. Can you move all files in the same location and check if it works.

  Thank you

  Regalo

• Windows 10 first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).  Click OK to close the application.  I reinstalled, reformatted the drive one reinstalled Windows 10 from scratch and I still get this error.  Has anyone seen this one?  My setup is below:

  

  Hi PK Gary,.

  I recently had to create a new disk and install the full version of Windows 10.  I can get all my apps Cloud creative install, but first Pro Crash when I try to run it.  I get the following error "the application could not start correctly (0xc0000142).

  Update for Premiere Pro CC 2015 (9.2) for a fix.

  Thank you
  Kevin

• jsx first Pro CC scripting and exportFinalCutProXML

  I use calls to exportFinalCutProXML in my HTML5 for first Pro CC extension, and while it works very well, if the project has effects that do not necessarily translate at the FCC, we are forced to see a modal dialogue on 'Report translation' instructions and an OK"" button.

  While I understand the advantage for direct interaction from the user, it would be nice to be able to disable this dialog box programmatically to appear during the use of jsx script and save this XML file to a file in a script or an extension (not to mention the dialogue boxes that tell the user when resave the project and the "generation FCP XML...") »)

  (kind of how we can define a level of interaction in the old days with AppleScript etc...)

  PS, no one knows if the jsx Premiere Pro support will get all the love in the near future updates. It is quite rare at the moment.

  Would like to have more direct access to update/add/remove tags without having to mess with XMP and hacks FCPXML import/export.

  Would also like to be able to reproduce by programming that the file-> export-> markers (in HTML).

  Be able to get object marker models and possibly request generation of thumbnails for a marker or a given setting programmatically.

  Thank you

  The f

  exportAsFinalCutProXML() now has an additional Boolean param, optional; If 'true' is adopted, agency will remove all warnings/messages.

• I'm just getting started with adobe creative cloud. I hace low loaded Media Encoder CC 2015 as well as first Pro CC 2015, but when every time I select apps in the app it says "download error please aontact costomer support". I tried to slow down

  I'm just getting started with adobe creative cloud. I hace low loaded Media Encoder CC 2015 as well as first Pro CC 2015, but when every time I select apps in the app it says "download error please aontact costomer support". I tried to reinstall the creative cloud by using the link provided and I also tried manually. I have Windows 7 with a 64 bit system.

  Hello

  I think that you have found the "download error" in the Apps Panel.

  Please check the help below document:

  Download error in the applications tab of Creative Cloud Desktop Application

  You can also view the threads below:

  https://forums.Adobe.com/thread/1832357

  Persistent Cloud error - error download - creative

  Re: Creative Cloud "Download error" message

  Kind regards

  Sheena

• I've updated windows and now my computer does not connect to the wireless network.

  I've updated windows security updates and now my computer does not connect to the wireless network.  Until then, it worked very well and even now it will connect through wired connection but not wireless.

  Hello
   
  You can follow below link that can help you to solve your problem:
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702

• Windows and Windows update install error 641 that install the windows service could not be accessed

  Original title: Windows Installer and windows update error 641

  I get the following error when I try to install the latest Java Update. "The windows service install could not be accessed. This can happen if windows install is not properly installed. Contact your support team. In addition, I now have 14 exceptional installed updates which always fail with error 641. I have Vista 32-bit SP2. In addition, in respect of the services Windows Installer does not show so I can't restart. I tried all the other patches. Any ideas?

  So what do you suggest...

  Have you tried the resolution in RESPONSE to my colleague Maurice message in this related thread yet? -Online http://answers.microsoft.com/thread/d6fedf33-dc1b-451f-9aab-97429f916180

  Have you contacted Mechnic (iolo.com) support system yet?

• I used imesh to download my music, I reinstalled windows and loaded my music back and now that they will not play. He asks me to require a license

  I used imesh to download my music, I reinstalled windows and loaded my music back and now that they will not play. He asks me to require a license

  Hello

  1. on what application you are unable to read the music file?

  If you use Windows Media Player, I suggest that you follow the steps in this article and the Coachman.

  http://support.Microsoft.com/kb/925705