First Pro CS5 mercury engine works with my imac 27-inch?

Similar Questions

• First Pro CS5 never uses more than 15% of CPU, so perform much more slowly than first 6.5!

  Hello.

  I make videos of marriage for a while. My material included map DV500DVD and first 6.5 CPU Core 2 Duo E8400, 2 GB of RAM, Windows XP SP1 (DV500 does not work with SP2 or SP3).

  The above system is quite old and absolutely not usable for HD videos. So, I decided to build another machine. The configuration is the following:

  OS: Windows 7 Professional 64 bit.

  M/b: Asus LGA 1155, H67 chipset.

  CPU: Intel Core i7 - 2600K

  RAM: 4 GB DDR3

  HARD drive: 2 x 64 GB SSD, 2 TB SATA (RAID) 4 x (all drives connected to separate the controller PCI-E chipset fault intel isn't a problem here)

  I recently downloaded and installed the first Pro CS5 trial version, to see how he adapts to my needs. And I'm very disappointed. I started the first, chosen preset widescreen DV, inserted two static images on the timeline and made a mix alpha between them. Then put movie export. Not only it took too long to make, but it only used a nucleus, and the CPU usage is only 15%. Just out of curiosity, I installed first 6.5 on the same system, and he did this task about 10 times faster!

  That is, limitation of the trial version, or just first Pro CS5 cannot be used with this modern processor?

  Thanks in advance,

  Alex

  I can understand your experience... After I installed Windows 7 and CS5 Production Premium, adding another 8 Gig of Ram for my PC, dying on the fact that my Nvidia Quadro FX 4600 is not able to use the reading mercury and literally hours of waiting for spending returns, on a hunch, and after reading about someone else who did the same thing.  Finally, I took my old PP CS3 and installed on alongside first CS5. To my surprise, with 64-bit OS, CS3 running and makes exactly the same content about 4 times faster, does not idiosyncratic seizures slow when moving clips in the timeline, no white on the error screen "not responding" messages, etc.etc. I have no problem with After Effects or Photoshop CS5, they work fine, but first CS5 is close not functional as it gets. A: 30 minutes with some effects of magic bullet, even native capture HDV format takes about 10 minutes with PPCS3... and about 45 minutes with CS5. CS3 also reads smoother and barely stutters, so that I have to sit and to return with CS5 because of choking in order to continue working. One post suggested that I don't have enough gas in the machine, dual core AMD Opterons 3.2 GHZ, disks, 16 Gig ram working 7200 and 10 000 rpm... but cannot see how CS5 can maybe make CS3 on the same stage. What I'm missing here? I'm not whining just baffled.

• First Pro CS5.5 installation problems

  I am a newbie to Apple systems and therefore has no chance first Pro CS5.5 installation to my new iMac desktop PC.

  I have correctly installed and used this program on my system Win7 very familiar, but move to OX10 and Apple has proved more

  that my non-technical brain can handle.  I can't find anything specifically labelled Install.app by clicking on some files with

  'Install' on the label, a box pops up saying "there is no set application to open the document.  So I would be able to work on my images,

  and I'd appreciate any help you amazing, knowledgeable, people can provide!  Thank you!

  Have you tried some documents for OSX beginners on the web?

  http://www.YouTube.com/watch?v=8gkvAt1FYps

  http://guides.MacRumors.com/Installing_Applications_in_Mac_OS_X

• First Pro CS5 pixelation with T2i .mov files

  Thanks for the great information!

  Here's my scenario...

  • Windows 7 64 bit family

  • Intel quad core processor

  • Nvidia Geforce Gt240 graphics card

  • 8 GB of ram

  • G - tech g-raid0 drive 2 TB (for image storage)

  • WD Caviar Green 500 GB (OS Win764bit & amp; applications)

  • WD 250 GB usb 2.0 external drive (for backup)

  • First Pro CS5 (prod prem) modded to enable nvidia gt240 graphics card be used with the Mercury playback engine

  Backstory:

  I shot a short film of 2 weeks using a Canon Rebel T2i at 1080 p 24 with shutter speed 1/50.

  At the end of the first day of shooting, I had to transfer the .mov footage off the coast of the Trandcend 16 gb class 10 memory cards with card reader Kingston for the Raid. I used a legacy firewire card connected to the aforementioned PC (it's all I got for the firewire connection at the time), and I noticed that the file transfer has been extremely slow. So for the next two days after I transferred the rest of the video on the Raid via USB 2.0 and the other files transferred much faster.

  Play the images using VLC Media Player is well most of the time, but sometimes I see for about 5 frames pixel information is lost. It is not rolling shutter or jello. Part of the pixelated frame strongly for all 5 to 10 frames. I don't know if it's the loss of data on these images? I agree with a few images here or there, I can work around it if I have to...

  The problem:

  I used the DSLR 1080 p 24 preset to set up sequences of the first Pro CS5 project. After you import the images above, reading in two preview windows randomly is pixelated, similar to the effect of VLC, but random parts. For the most part, VLC is compatible with the management of the problem. Whenever I start the first it will be Pixelize frames in different places than before. Sometimes when I run first first is good, then after a few readings, it starts to distort. After management problem for the current session, the pixelation appears in the clips that have the green status bar. Also, sometimes (randomly) some of the clips in the timeline panel have green waves at the bottom of them, or are completely green.

  I tested the raw images in VLC, WMP, Media Player Classic (after you temporarily install KLite hoping to solve the problem). The problem that all .mov files seem to Pixelize the same framework of each player. First, but pixilated times randomly.

  Tried with two mpeg streamclip and even with cineform neoscene U transcoding. Same results.

  I have not been able to narrow down what is the problem. Any ideas?

  Thank you very much.

  The problem is resolved. My cache of media was written to my local hard drive (c :)), a WD Caviar Green 500 GB. It turns less 7200 RPM, as it is friendly green. After clearing the cache and redirect the path to the raid 0 drive 7200 RPM, the media reads in the timeline smoothly without pixelation. A high technology, Adobe has helped me solve this problem after a lot of troubleshooting. Thank you!

• Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Windows PC upgrade to 10. Try to install the first Pro CS5. Does not work.

  Download the following messages: Exit Code: 7 please see the faults and warnings below for troubleshooting. For example, ERROR: DW050... WARNING: DW036, DW066...

  -0 fatal Error (s), 82 (s), 124 warning (s)

  Any idea?

  Thank you

  Jaap

  Do you have other Adobe applications installed on your computer?

  Navigate to C: > Program Files > Adobe.

  Open the Adobe folder and check if the Adobe Premiere pro CS5 folder is created with files stay inside?

  Let us know.

  As System File Checker run command once and see if \any system files are corrupt. As you had upgraded to Windows 10 we will check the system files once. Later we can try to provide full permissions for the required records.

  https://support.Microsoft.com/en-in/KB/929833

• Work on keyframes in copied sequence change the original sequence as well (first Pro CS5.5)

  Hello world

  Maybe it's a very basic question, but looking on the forum did not bring to the top of the related issues, so I'm going:

  Let's say I have copy a sequence in first Pro CS5.5 and paste it into the same project. I have a few textclips with keyframes in them. (I do, because the videos remain the same, I just write different things in them.) When I change the keyframes in the copied sequence, the way that I need them out there and then come back to the original clip, keyframes it changed as well. This isn't what I wanted.

  So my question is: How can I make a copy of a sequence and then work on it without changing the original at the same time? Why are they related in any way? What's a selection in my version of Premiere Pro or is it a general thing?

  Be great if someone could explain it to me.

  Thank you!

  When you open your title for editing, press the new title based on the current title in the title Editor button; It's one that looks like the film with the "T" in it. This will create a new title in the sandbox, but will not replace the current instance of the title. However, you can simply drag this copied to the instance title, hold the Opt/Alt key and drop it onto the animation instance, copied. This will replace the contents of the clip, but preserve the animation.

• Problem with the creation of a framework implemented in first Pro CS5 masks

  I'm having a problem with creating masks of an exported framework generated from first Pro CS5. I export the image that is 720 x 480. I open the image in Photoshop and check that there is still 720 x 480, change it to create my mask and important in Premier Pro to find the frame is therefore more 720 x 480. To see if the problem is with Photoshop I tried to export a picture and immediately re - import the back always first.  Of course, he has apparently changed aspect because it shows with vertical black bars on either side in the source viewer and actually overlaps the clip original/image as an image horizontally narrowed as part of the program sequence. No idea what I'm doing wrong?

  I am assuming that you are working with a DV footage in a DV sequence; This video format uses non-square pixels, but the images have square pixels. Probably, the pixel aspect ratio (PAR) of the imported image is not be interpreted correctly.

  Right-click on your any graph, and then select Edit > interpret footage. Check that the format of the pixels in the image is set; If this isn't D1/DV NTSC (. 9091), click on the option button "Conform" and choose that BY the menu drop down.

• Audio does not synchronize with the video in first Pro CS5.

  I recently did a minute 50 video in Shadowplay in format mp4 1080 p and 60 fps. When I look at the video using the default player on my Windows 10 computer application, the audio and video sync very well. However, when I add in first Pro CS5 is no longer syncs. I tried to use a custom preset but who has not yet worked.

  Playback is nervous as well?  First CS5 is older than 5 years and you can be on the 32-bit version?    Also be sure to what ShadowPlay produces a constant frame rate export.   First dislikes images of frame variable rate but which usually manifests as not be able to play all the.

  Try to run your file through Handbrake and set it to constant framerate and try again first.  Is not guaranteed to solve the problem, but removes a suspect.

• First Pro CS5 does not not after 55 minutes of capture with intensity shuttle

  Hi and thanks for the valuable resources on this forum.

  I'm analog video capture in first Pro CS5 it using the shuttle Blackmagic intensity (with corrector time basis in the path of the video).  My shots are stopped at 54 or 55 minutes when the computer becomes inadmissible.  What happened with the codec Blackmagic movement as well as jpeg YUV 10 bit capture. Same thing if I capture with express media (blackmagic capture software)

  I tweaked my system according to the many recommendations in the forum.

  Running CS5 5.03, backup 10 minutes automatic (same problem without automatic recording or automatic check in at 20 minutes)

  Windows 7 64 bit fully up-to-date

  I7 - 930 cpu

  Gigabyte x58A - UDP5 (revision 1)

  24 GB Ram

  NVIDIA 470 - MSI twin Frozr cooling solution.

  Restore off, windows search indexing

  Followed advice from the forum and Viper about optimization system

  3 hard drives

  System on standard Sata 2 drive

  The capture of SSD drive from OCZ Vertex 3 120 g (beautiful piece of gear) of the project currently running on the Sata 3 controller

  Pagefile on another hard drive

  Uninstalled Norton 360

  Anything else I could find uninstalled or disabled.

  Firmware and latest drivers for USB of the Station pilot as recommended by Blackmagic.

  Capture of the very successful things less than 55 minutes, but I have things any longer I would like to capture at once.

  I used process Explorer to watch what is happening.  Nothing special that I can identify in terms of process, but cpu seems to be 100%.

  With the progressive settings problems remain the same.

  I'm not aware of any limit of size of file with Premiere Pro or Blackmagic - is there some?

  Whereas reinstall but would be grateful to all points of view.  My first post so I hope that I have provided good info to help me help you.

  Thank you

  Andrew

  As happens with the BM software as body, I will GUESS that the problem is with the pilot BM device that links software appliance

  I would check to see if they have a difficulty with BM

• Why can not install first Pro CS5

  I have a clean first Pro CS5, and I can't install it on my new machine. Why?

  Hi NickStarBustter,

  Operating system of Windows 10. Can you confirm the type problems

  Your operating system is not supported: Premiere Pro system requirements for Mac OS and Windows. If the software works at all, you will have unexpected behavior that may prevent a video project.

  I suggest that you buy a separate boot disk, install Windows 7 and install first Pro CS5 on this disc. Start on this disc of any time you need to edit with first Pro CS5.

  Thank you
  Kevin

• First Pro Cs5 windows don't respondents not 10

  Hello

  After the upgrade to Windows 10, I noticed that first CS5 will not respond for 10 to 30 seconds each time I get out of the program to check e-mail, internet, and then go back to change.

  My specs:

  OS - Windows 10 pro set for priority of performance

  CPU - Intel I - 7 3960 x 3.30 GHz

  Hand drive - Seagate 750 G Momentus XT (472g free)

  Storage - Seagate 2 t in Raid 0 (234g free)

  Video card - Asus GTX 570 1280 MB 320 - Bit GDDR5

  RAM - 16g

  Any help would be appreciated.

  Hi IOU.

  OS - Windows 10 pro set for priority of performance

  Sorry, you have problems with this. The problem is that you are running an operating system not supported according to requirements for CS5. Windows 10 is simply not supported, we cannot give you advice other than the installation of a Windows 7 boot disk in your computer and first Pro CS5 install it. Start this drive when you work with first Pro CS5.

  If you use this software with Windows 10, unexpected behavior will continue to arise. If all goes well, another user will be upward to help you with these errors if you insist on running the outdated software with a modern operating system.

  Thanks and good luck,

  Kevin

• First Pro CS5.5 quit unexpectedly. Mac 10.10.2.

  Hey there,

  My Mac has just started popping up with the box of 'first Pro CS5.5 close unexpectedly.  Nothing has been done differently and the program works for years.  Any help?

  My Mac is a 17 2011 "and currently has OSX Yosemite 10.10.2.

  

  Problem solved.

  I couldn't find the Colorista file for some reason any. I looked at red giant through Finder (the company that manufactures the Colorista) and there was an application uninstall program they provide. In this App Uninstaller was able to uninstall the Application Colorista. After uninstalling, everything works fine.  Thanks for the help guys!

• First Pro CS5.5.2 will not install after the replacement of the motherboard?

  First Pro CS5.5.2 will not install after replacing mothboard. It was running properly for 4 weeks before changing due to problems connecting AC and wireless connectivity.

  Adobe, case No. 183519673, Adobe engineers (Asia/Pacific) have worked on this issue for more than 3 hours with no result after uninstalling and reinstalling.

  Ideas for resolving the issue wou; LD appreciated.

  Also available at the section of material http://forums.adobe.com/message/4634472

  There is a new forum for download & install and installation issues

  http://forums.Adobe.com/community/download_install_setup

  Or, call Adobe

  In the United States - Adobe install problems 800-642-3623

  In the United States - Adobe Activation 866-772-3623 Open 24/7

  I offered to provide information of make and model of motherboard

  [Additional information about else added]

• First Pro CS5.5 titreur crashing on start up

  I have a recent issue with the titration module. First Pro CS5.5 Titler crashes constantly when opened. I can not open past projects which includes the titration module or have titles in it. Last night I was finishing a project (of course) who has titles in it. This morning when I tried to open the project, I got the BLUE SCREEN of death. I restarted and was able to open the first pro cs5.5, but it does not display the recent previous projects. It was as if everything got zero including my preferences. I tried to open my project that has titles in first pro cs5.5 accidents and she immediately. I then try just open a blank project and all is well. While in this empty project, open the titration module causes an immediate crash.

  Now, I still have first pro cs5 on the computer so I'll and open an empty project in cs5 and everything's fine. I try to open the module of titration in cs5 and everything's fine. I try to open in my project with securities and well-functioning cs5.5 cs5. It opens and works as it should.  But of course, it's a real pain because my cs5.5 after effects sequences are not backward compatible. I reinstalled first pro cs5.5 and tried everything again (above), but met with the same results. I have the latest version of windows and Quadro 3800 NVIDIA updates. I've been editing on this system for almost a year with cs5 and 3 months with cs5.5 (production premium)

  Specifications of the computer:

  Office high i7 2.8 gHz

  Qudro 3800 with last orders

  Professional drivers latest window 7

  24 GB ram

  7terabites of hard disk space.

  .

  Thanks to Bill Hunt and his article and tread on the corrupted fonts, I was able to find a solution. In fact, it wasn't a police problem, it was one obscured 5.5. file that was bad. Bill that included in his thread. File: 'workingset.prsl' found in the mydocuments/adobe/premierepro/5.5/styles folder.

  I first moved the file out of the folder and first pro 5.5 module titration. He started very well without any problems. I was able to open my previous projects which involved that I wasn't able to open before the titration module. Regenerates the file in the folder styles. I can remove the old file prsl.

• First Pro CS5.5 never started place... error message each time. Help please?

  Hello...
  
  I recently bought the suite Production Premium CS5.5.
  
  Most of the work programmes. (I have not tried ALL the.) But the main - CS5.1 Photoshop and After Effects - work perfectly).
  
  But first Pro CS5.5.0 does not open. Keeps giving me the good old error message: "Adobe first Pro CS5.5 has stopped working". What happens whenever I try to open it. And it is never past the opening screen. He is MIGHTY frustrating. And there seems to be no coherent advice in this field all over the Adobe Forums. Maybe I've not spotted.
  
  I run a Fujitsu Lifebook T901, using Win 7 64 bit Version Service Pack 1 Build 7601 6.1.7601
  
  Processor Intel (r) Core i7 - 2620M 2.70 GHz, 2701 MHz, 2 Lossnay, 4 logical processors
  
  Version of the FUJITSU BIOS/Date / / Phoenix Technologies Ltd Version 1.04, 17/02/2011
  
  8 GB of RAM.
  
  Please guys... what should I do?
  
  Operating system: Windows 7
  Printer model / version of the driver: Intel HD Graphics Family
  Video display card / driver version: 8.15.10.2246
  He has already worked? If so, what has changed? (provide comments in the description field): No.
  Same results with different files? : not Applicable
  Same results with different computer? : not Applicable
  Change recent system hardware or software? : no

  Alan is correct.

  Here is an overview of the system requirements:

  http://www.video2brain.com/en/videos-5351.htm