First Pro CS5 never uses more than 15% of CPU, so perform much more slowly than first 6.5!

Similar Questions

• First Pro CS5.5 using 50% of the processor to Render?

  I just downloaded and installed Adobe first Pro CS5.5 and when I go to make the video it uses only 50% of the CPU power. I did not have this problem in CS5. Is there some sort of setting I need to change? Any help will be great, thanks!

  Your probably having to define the pp optimized for Proccesor not for ram.

• First Pro CS5.5 using 25% of CPU when closed?

  Depending on the subject.  If I open the Premiere Pro it uses only a few percent of the CPU when idle, but when I stopped him, he immediately begins using 25% CPU distributed over four my Q9550 processor cores.  If I open and close the Premiere Pro, it will take another 25% of the processor.  It's a balance of 25 per cent for each time I open and close Premiere Pro

  I use Windows 7 and CS5.5.  I also have Photoshop CS5 and inDesign CS5 installed.  Someone at - it ideas?  I tried Google.

  TIA

  It is cycles CPU.  PP seems to release RAM when closed.

  Hey!  I just found this thread, and I don't have a HD 4800 Radion graphics card:

  http://forums.Adobe.com/thread/798033

  Its driver was last updated all the time that Photoshop CS4 had problems displaying brush sizes, so I'll see if there is a driver and a report back later.

• Flash CS3 Pro CS6: games works more slowly?

  Good, everyone. I will try to explain the problem I encounter as concise as I can:

  I just got a new iMac (10.8.2) and I got all my stuff in CS3 hover over with a transfer system. However, Flash CS3 has this message "error initializing java runtime environment" and I can't get it repaired despite the number of 'solutions' that I found, mainly because the patches are for older versions of Mac and its operating systems. That said, if anyone has found a fix for this problem on the new iMacs and operating systems, please let me know and ignore everything that I'm about to ask questions on below.

  However, I decided to give a whirl CS6 and see if I should go ahead and upgrade to one. The problem that I am running is disconcerting say the least. I was doing a game in Flash CS3 and Actionscript 3 on my old Macbook Pro (2007-2008ish) and I managed to run at a solid 60 frames per second. This is not really surprising, given how little there is in the game so far, but I am concerned that they run slower when running through Flash CS6 on a computer more recent (2.9 Ghz Intel Core i5, 8 GB of RAM, NVIDIA GeForce GT 650 M 512 MB).

  I tested the executable (.app) both the .swf, and both run much slower than they should. Cadence plunges even when there is nothing on the screen except for the character and background. Curiously, if I have the game running in Flash Player 9, it works fine, but everything else (10 and more) runs significantly more bad.

  Anyone know why the game will run more slowly? I even tried to use hardware acceleration, and there was no change whatsoever. If the files that I opened, .as files both .fla, were at the origin of the CS3 files? Creating CS6 files from scratch and then bring the content and code on would fix the problem?

  Any other suggestions would be greatly appreciated. Thanks in advance,

  Ian

  Never experienced sth. Like this. It should not matter if you are publishing to Flash Player 9 (CS3) or 11 (CS6).

  I even tried to use hardware acceleration

  Hardware acceleration will be most often slow down your fps if you are not using the Stage3D/Starling features, you will need to disable your Flash Player via right click options, too, though. It would be my first guess would default to HwAcc a new installed Flash Player 11.5, so you must manually, turn off when it does.

  If its possible for you: load 2 (CS3 - swf, CS6 - swf) Versions of your game to the top and post the link, then I could test it in Windows to see if his mayba a number Macrelated.

• Satellite Pro L670 Windows using MORE storage than the MAX I put pictures!

  I have a strange problem, at least it seems strange to me!

  After problems with my last laptop under Vista where space excessive was used by phantom memory, I immediately checked the set up on my new Pro L670 of Satellite running Win 7 64 bit. Pleasantly it was set by default at a MAX 10 GB setting that was very much like the HD 500 gb, however a few days later I found that a few GB of space went so checked again at the vssadmin to find he was using 12 GB even if max was still 10 GB!

  I ran a command to resize to the size to 10 GB max, which immediately reduced the used space up to about 8 GB, but a few days later he was back to 12 GB!

  How can this happen?

  Today, I checked in "System Protection" of the control panel that has been repoorting that only 4.5 GB used even if vssadmin list shadowstorage reported 12 GB! I have reduced the MAX space by using the slider in "System of Protection" to 6,99 GB and see if Windows supports any notice this time.

  Does anyone have a similar experience?

  Post edited by: scoobasteve

  Hey Buddy,

  Why is it a problem that 12 GB will be used for the protection of the system on 500 GB HARD drive?

• Photoshop CS5 gets body more slowly after a while

  The subject in fact. In half an hour of intensive use the programm gets slower and finally a simple as picking a color with a pipette takes seconds. Allows you to start the program, but is not very uncomfortable workflow to restart PS all the 30 min. I have the PS CS2 installed and it works perfectly as well as other applications like Illustrator, Flash or InDesign CS5 resources. And Yes, have read all the formal and informal advice on optimizing PS performance and so on. Do not know what system information is relevant to the problem, so here are a few:

  Adobe Photoshop Version: 12.0.4 (12.0.4x20110407 [20110407.r.1265 2011/04 / 07:02:00:00 cutoff; r branch]) x 64

  Operating system: Windows 7 64-bit

  Version: 6.1 Service Pack 1

  System architecture: Intel CPU Family: 6, model: 15, Stepping: 7 with MMX, entire SSE, SSE, SSE2, SSE3 FP

  Number of physical processors: 8

  Processor speed: 1995 MHz

  Built-in memory: 8190 MB

  Memory available to Photoshop: 7203 MB

  Memory used by Photoshop: 95%

  Tile image size: 1028K

  Image cache level: 6

  Display: 2

  View the limits: = top: 0, left: 0, bottom: 1200, right: 1600

  Display: 1

  View the limits: = top: 0, left: 1600, bottom: 1200, right: 3200

  Video card: 1

  Graphics card: NVIDIA GeForce 8800 GTS

  Driver version: 8.17.12.8562

  Driver date: 20111015000000.000000 - 000

  Video mode: 1600 x 1200 x 4294967296 colors

  Legend of the video card: NVIDIA GeForce 8800 GTS

  Video card memory: 320 MB

  Zero Photoshop has async I/O active

  Scratch the volumes:

  F:\, 1, 82 t, 1, 16 free t

  C:\, 111, 7 G, 47, 1 G free

  Plug-ins that could not load: NONE

  Install TWAIN devices: NONE

  No third-party plugins installed.

  Thank you.

  It seems that you are starving the computer using 95% of the RAM for Photoshop.

  Past debates have shown, you should have at least 2 GB for the computer.

  So in your case PS should use no more than 5,200 concerts.

• First Pro CS5 does not not after 55 minutes of capture with intensity shuttle

  Hi and thanks for the valuable resources on this forum.

  I'm analog video capture in first Pro CS5 it using the shuttle Blackmagic intensity (with corrector time basis in the path of the video).  My shots are stopped at 54 or 55 minutes when the computer becomes inadmissible.  What happened with the codec Blackmagic movement as well as jpeg YUV 10 bit capture. Same thing if I capture with express media (blackmagic capture software)

  I tweaked my system according to the many recommendations in the forum.

  Running CS5 5.03, backup 10 minutes automatic (same problem without automatic recording or automatic check in at 20 minutes)

  Windows 7 64 bit fully up-to-date

  I7 - 930 cpu

  Gigabyte x58A - UDP5 (revision 1)

  24 GB Ram

  NVIDIA 470 - MSI twin Frozr cooling solution.

  Restore off, windows search indexing

  Followed advice from the forum and Viper about optimization system

  3 hard drives

  System on standard Sata 2 drive

  The capture of SSD drive from OCZ Vertex 3 120 g (beautiful piece of gear) of the project currently running on the Sata 3 controller

  Pagefile on another hard drive

  Uninstalled Norton 360

  Anything else I could find uninstalled or disabled.

  Firmware and latest drivers for USB of the Station pilot as recommended by Blackmagic.

  Capture of the very successful things less than 55 minutes, but I have things any longer I would like to capture at once.

  I used process Explorer to watch what is happening.  Nothing special that I can identify in terms of process, but cpu seems to be 100%.

  With the progressive settings problems remain the same.

  I'm not aware of any limit of size of file with Premiere Pro or Blackmagic - is there some?

  Whereas reinstall but would be grateful to all points of view.  My first post so I hope that I have provided good info to help me help you.

  Thank you

  Andrew

  As happens with the BM software as body, I will GUESS that the problem is with the pilot BM device that links software appliance

  I would check to see if they have a difficulty with BM

• using first pro cs5.5, when I opened the project opens as first cloud creative pro and asks me to renew my subscription which was canceled less than a year ago help needed please keith

  Why my project first pro cs5.5 opened as creative cloud when I do subscribe to creative cloud keith

  Thank you for your help no I don't have any apps cc on the computer, but what I did to restore to a previous date pre windows 10 and that seems to have solved the problem many thanks again keith

• First Pro CS5.5 never started place... error message each time. Help please?

  Hello...
  
  I recently bought the suite Production Premium CS5.5.
  
  Most of the work programmes. (I have not tried ALL the.) But the main - CS5.1 Photoshop and After Effects - work perfectly).
  
  But first Pro CS5.5.0 does not open. Keeps giving me the good old error message: "Adobe first Pro CS5.5 has stopped working". What happens whenever I try to open it. And it is never past the opening screen. He is MIGHTY frustrating. And there seems to be no coherent advice in this field all over the Adobe Forums. Maybe I've not spotted.
  
  I run a Fujitsu Lifebook T901, using Win 7 64 bit Version Service Pack 1 Build 7601 6.1.7601
  
  Processor Intel (r) Core i7 - 2620M 2.70 GHz, 2701 MHz, 2 Lossnay, 4 logical processors
  
  Version of the FUJITSU BIOS/Date / / Phoenix Technologies Ltd Version 1.04, 17/02/2011
  
  8 GB of RAM.
  
  Please guys... what should I do?
  
  Operating system: Windows 7
  Printer model / version of the driver: Intel HD Graphics Family
  Video display card / driver version: 8.15.10.2246
  He has already worked? If so, what has changed? (provide comments in the description field): No.
  Same results with different files? : not Applicable
  Same results with different computer? : not Applicable
  Change recent system hardware or software? : no

  Alan is correct.

  Here is an overview of the system requirements:

  http://www.video2brain.com/en/videos-5351.htm

• Satellite Pro L40 PLS4BE: Can I use more than 2 GB of memory

  Is it possible add more than 2 GB of memory?

  What happens if I add e.g. 2 x 2 GB?

  Intel says GM965 supports 4 GB max memory...

  BR,

  Mikko

  Hello

  No you can not use more than 2 GB of RAM. You can upgrade the laptop up to 2GB (2 x 1 GB).

  > What happens if I add e.g. 2 x 2 GB?
  I think that nothing will happen ;)
  Either your laptop will not start or will start the laptop but the full RAM will not be recognized

• What's new in Premiere Pro CS5. Questions: markers, shortcuts, key frames and more!

  Hi everyone, this is my first post. I'm an editor of Argentina, with background in Avid media Composer, but I go for first pro cs5 for a new job. I was very surprised and happy with it. But there are still one or two things that I have quite right yet.

  So, a few questions from newbie... you'll save me a lot of time if you can answer some of them.

  Markers
  1. can I use markers of different colors?
  1. is there a way to select more than one marker and remove them at the same time? Of course, with all of them, delete only links I need.
  1 c. How can I configure a shortcut for go to next\previous brand of element in the timeline? In shortcuts, I go to the marker > Go go Clip marker > and select a shortcut, but in the timeline, it's going anywhere I've done this work for brands of sequence in the timeline panel and this shortcut also knit to marker on an element next\previous in the source monitor.
  1 d. How to extend a marker in the timeline? I know I can set the duration of the marker in the pop up menu... but if there is a way to do it directly in the timeline?

  Razor tool
  2. a simple. After that I used the razor on a clip tool... How can I join the clip again?

  Track selection tool
  3. how the Selection tool track, select all the items to the LEFT, instead of all the clips right? In avid, there is a Select right command, which works like the track picker, but there is also a command select left, which does the same, but left.

  Master Audio meters
  4. another single. Can I put it horizontally? It fits perfectly in the toolbar then.

  Tab sizes
  5. the size of the tabs can be changed? I have 'Media browser', 'Info', 'History', 'Effects' all platform... but the size of the Panel is such that I never see the four legs at the same time, I have to drag the small bar at the top. Can I have the tabs be smaller so that I could see the four of them... as if they said «Media...» 'inf..' 'hist'... "' eff '... instead of wasting space with names long tab?

  Keyframes
  6. is there a shortcut to add - we? Where is it in the shortcut configuration? I know that I can put them with the pen tool, I need a shortcut to replace the "Add/Remove keyframe" button on the tracks in the timeline.
  6B. How can I align the time indicator to a shortcut in the timeline?
  6 c. can I lazo several keyframes?

  Any audio by rubbing
  7. in preferences > Audio > Play Audio while scrubbing I choose walking and stop. How can I define a shortcut for this?

  
  Well... that was a LOT! Sorry for so many questions. If all goes well they can help new users.

  From the top:

  1. No; but you can set markers numbered for the clips and the sequence.

  1. No; You can delete one or all.

  1 you must select the clip in order to activate the command.

  1 d. you can do this in the marker dialog box.

  2. no direct way to do it. Remove either the front or after editing and then extend the clip to fill this gap. Awkward, Yes.

  3. No, the track Selection tool doesn't work right.

  4 audiometers are vertical.

  5. the tab size matches the title of the tab; no way to change this.

  6. no keyframe shortcut.

  6B. This does not work in the timeline panel, but in the effect controls panel, you can hold the SHIFT key to snap the CTI by dragging.

  c. 6, you can catch several keyframes in the effects with the standard selection tool Panel, or you can use the pen in the timeline panel. Just be sure to start within the graphic representation of the clip.

  7. No, this is only a preference program.

  I'm sorry that many of them are negative! Don't forget to apply for feature for what you would like to see: Adobe feature request/Bug Report Form

• Video card for first Pro CS5

  I'm currently has the NVIDIA GeForce GTX 285, Win7, 6 GB RAM and periodically get the crash program and the following error when you work with projects: driver problem detected OpenGL NVIDIA with the display driver.

  I want to upgrade to a better video card and would like a professional recommendation. I want to stay in the range of $400-$500. Most of the recommendations that I looked on the forum seem obsolete compared to products currently listed on the NVIDIA site. Thank you.

  What Bill meant that with only 6 GB of RAM (which is IMHO not enough RAM to run Premiere Pro CS5 + to the satisfaction of most of the people), the high-end cards would have been a total waste of money: performance of the RAM and the large pagefile expansion will severely limit any provision of performance for the high-end cards to the point where these cards would not be a faster than cards much cheaper. In other words, there is a mounting system as fast as its weakest link (in this case, the low amount of RAM and the generally slow hard disks that are used to Exchange files). Increase in the total amount of RAM 12 GB (or better yet, 24GO) would significantly reduce the need for such a huge, slow the pagefile access. Even the fastest SSD can't stay with the RAM in terms of throughput and latency for access.

  And which causes this slow performance of your system is Windows increases generally the file exchange - and with only 6 GB of RAM and a relatively heavy such as Premiere Pro resources application, it would requre a rather huge swap file. By default, Windows sets the size of the initial pagefile roughly equal to the amount of RAM installed. What is happening here is that the difference between the amount of installed RAM, used by the first and the amount of space for swap file that requires the app is so great that it would have potentially forced the size of pagefile to mushroom in many more than 10 GB. This considerably reduces the performance of the total system, performance not only in first. Even if the size of the pagefile in Windows for an amount well above the RAM installed will not completely solve the problem of slow because no disc is nowhere nearly as fast as RAM. But if you do not use a swap file, especially with a low amount of RAM installed, the system will crash during a session of editing/rendering/encoding with "out of memory" errors.

• Transitions and effects in first Pro CS5-

  Hello

  I'm a new entry and so I have little experience. I just installed first Pro CS5 for Mac and in the effect controls panel, I find very little evidence. Is it possible to find more items to download? and in detail that can help me make a zoom on a clip effect?

  Thank you very much

  You are welcome.

  I also have pre with some of these Presets, but never use them. Whether it's pre or PrPro, I like the control I have with keyframes to these effects 'fixed '. Note: with all the video (and still images) Clips, there are effects that appear automatically. Those are fixed effects, as the movement, Rotation, opacity and Volume, if the Clip's Audio. Other effects are found in the effects Panel, and many can be alterations to the over time, in the effect controls panel.

  Good luck

  Hunt

• Import MXF on first Pro Cs5 (Panasonic P2) batch?

  Hello

  Does anyone know how to import several both mxf files without having to import the folder contents as separate files? To be clear. I know that several ways to import the mxf in first files. The first is to simply click on file > import, and then browse to the file. Another way via the media browser and yet another is to click with the right button on the project Panel and selecting import. They all share the same problem. You can only import one file at a time because you must select the mxf file in the video subfolder. First then composites the audio and video together. If you select instead the 00 files # you can select more than one, but you get lots of separate audio and video files for each clip. (You also get a composite file but the additional files are a nightmare when it comes to the Organization).  The file looks like when you navigate using the Flie > import or right-click > import methods:

  

  The media browser option is slightly different in the time you navigate to the folder 00 # you see the composite file instead of the content folder. But still you cannot select multiple files at the same time unless you navigate only in the parent 00 # s folder so you can select all folders 00 # but you get the same messy jumble of files you get trying this the other way. You can just drag them to the project or Panel right click > import to import the files. This is what it looks like:

  

  The problem is that it is what the file looks like when you import the file:

  

  The only necessary file in this folder all is the last. Then someone does know how to import several mxf files in an era that produced only a single file by sequence in first pro CS5?

  Yes, P2CMS is kind of stupid that way - it is really built for a FCP workflow, where you can not handle the MXF files natively. I'm not using P2CMS (or at least I have not for a while), but see if you can turn off the ability to split clips in folders like this.

  The mode of operation of the P2, is that a CONTENT folder is created, with AUDIO, VIDEO, CLIP, ICON, VOICE and PROXY files it contains. Each folder contains the part of the MXF clip that corresponds to the type of folder (ie. video goes into the VIDEO folder and so on). When you ingest with P2CMS, it grabs all the components of a specific clip and throws them in a folder named for the clip. The idea is that it facilitates asset management, because you can only select folders (clips) you want, and you will get all the files you need. I personally think it's a lousy way to do it, but it's me.

  If P2CMS won't let you copy a P2 card with the intact original folders, you can probably just use Finder to copy the CONTENTS of the folder and its, well well, the content on your local drive. So, when you look at the map "P2" of the media browser, you will see all the clips that are there.

• Why is-Premiere Pro CS5 slower on my system than Premiere Pro CS 4?

  I just upgraded Production Premium CS4 Production Premium CS5.  Have Windows 7, 64 bit OS, 9 GB ram,

  Processors Intel quad I-7 (over clocked to 2.90 ghz) 2.67 with hyperthreading.  I have nothing of any real substance

  running on my system in addition to Adobe.  I've just loaded in a ton of DVC PRO HD 60 images and am editing 30 minutes

  program.  Once I am in Adobe first Pro CS 5, it works quite well, everything works well in real time.  However, the time

  I click away from Premiere Pro as on my desktop, then try to click back in the Premier Pro, my screen goes white, Premiere Pro says

  "do not answer" in the title bar and everything freezes for a solid minute.  4 CS do not at all.  Anyone know what is happening?

  Eddiem TKS.

  The goal is to help and solve problems for all parties involved so that we can all be more productive.

  I never said or implied at all this:

  To say there is no problem with CS 5 software is just ignorant happiness and to be honest, deteriorate distorted.

  So... I'll put this another way for you then.  I will not have any issues that you and Sacha face with P2 files in particular.

  They review they rank, export etc...

  I have an ongoing project that has 54 GB of mxf source files.  Not a question that sounds like something that you mentioned above.

  It's a lot of files or a large project... I don't know compared to your projects... but combined with mixed graphic files more seq TIFF and tgas, wavs more notice of AEFX... it certainly adds to the top in my system.

  My material is not super computer. This is not even a system RAIDed.

  Must report... I go really far, or, to and from something else that applications of the Adobe Suite in my Suite CS5 but often many of them are open at the same time.

  I had a system glitch that caused 'go a little sleepy' apps, when left UN attended.  It was an advanced power management framework. (some what hidden)

  I also have a NAS, but this isn't for editing where to.  IT has Media Junction in my configuration between suites for the file archive and transfer only.

  Re: Why is-Premiere Pro CS5 slower on my system than Premiere Pro CS 4?

  My experience is that I said previously.  CS5 is much faster than CS4.  I suspect that many others have a similar experience to mine.

  So the question you guys are seen as being a little more unique to yourself.

  Good luck