First pro red stripes

Similar Questions

• How can I fix? Vertical stripes in still picture first pro?

  How can I fix? Vertical stripes in still picture first pro?

  Hi Gemma,

  Go to the file/project settings/general and change the rendering on "Mercury Playback Engine software only" engine.

  Press OK, you will get a dialog box in which select "remove previews."

  Try these steps and it should work.

  The best suggestion is to update your OSX 10.11.1

  Kind regards

  Navdeep Pandey

• RED - Red Rocket and first Pro CS5.5

  First post here and happy to be on PP. I am a ship of FCP...

  I'm a RED avid shooter... mostly underwater since 2007 and have been appointed first RED cameras. I understand and know well the RED workflow...

  September 24, 2011

  Ok

  using Premier Pro on my desktop and love it. However, it is not using my rocket card.

  That's what I've done so far for downloads:

  1. download CS5.5

  2. download the latest updates for CS5.5 of any of the programs by going to help, updates

  3. Download last (9/12 update for PP) for the first Pro 5.5.1 to: http://www.adobe.com/support/downloads/product.jsp?product=98 & platform = Macintosh

  4. download RED EPIC importer to: http://labs.adobe.com/technologies/redepic_importer/

  5 downloaded the LATEST DRIVER of the ROCKET: 1.4.16

  EPIC footage plays very well with images R1 in PP as well as Recommissioning Pro beta 3... EVERYTHING works fine... With the EXCEPTION I can't get any acceleration of rocket in the FIRST...

  Questions or places Posible that I screwed up:

  1. should I also download RED ADOBE CS4 Installer page Support RED?

  2. is the LAST ROCKET actually taken 1.4.16 firmware supported - on most threads, I hear people talking about firmware Rocket 1.4.7

  FINALLY: perhaps I need to activate the card of the rocket? I went on settings of the project; and other places to see if there is a menu drop down to activate the map of the rocket, but I can't find anything... I know I have to be in the project under general settings, and then under video rendering and playback... but this box is greyed out and won't let me NOT change... it is the default software of Mercury playback engine...

  Thanks for your comments

  ANSWER: thanks to David McGavran and Steve Sherrick Forum Reduser for the ANSWER...

  SIMPLE: go into your project window: top left area... then right click ANY R3d file... and select parameters Source... go to the bottom of the new window and choose Activate Rocket... the rocket card is then activated for all clips and chronology...

• First Pro CC constantly crashes

  Hey people,

  I have problems with first Pro CC

  Create a new project, first Pro CC starts with a black window. The window said events 'space of unknown work.'

  When you choose "all the signs" in the window menu, everything is in place.

  BUT when I add a new first sequence always blocks and

  a dialogue window says:

  Premiere Pro has encountered an error.

  [/ ZigZag/releases/2015.08/PremierePro/HSL/Src/SequencePlayer.cpp-552]

  A red winow appears:

  A breach of contract of entry took place.

  And then another window dialog:

  Sorry, that a serious error has occurred which requires Adobe Premiere Pro stop. We will try to save your current project.

  I work on a Mac Pro OS X 10.10.5, NVIDIA Quadro 4000.

  GPU - and CUDA-drivers are up-to-date.

  I uninstalled the first, then reinstalled, I erased the media covers. Nothing helps.

  I need a quick fix, need a stable system in two days, would be very grateful for the help on this!

  Thanks in advance

  OLE

  This was the solution:

  http://www.larryjordan.biz/premiere-trash-preferences/

• Magic bullet operating is not in first pro cc 2015

  I have problems with magic bullet suite operating in first pro cc 2015. When I use the editing within the interface functions of creating the display shows loading icon and freezes there. I have then close first pro and restart. When I use "seems" because I hit the edit button and magic bullet looks interface opens, a message will appear asking if I participate in something to do with the future of magic bullet looks. I have to click ok or cancel, the loading icon shows and freezes the screen here. I then close the program and restart. Basically, I can't use this software without creating or gel magic bullet.

  

  I did some research. My operating system is compatible. My host application is compatible. I see only 2 questions are: 1. lock of CPU? Or 2. Graphic card Nvidia Quadro 4000 M in my computer, there is not enough grunt to supply the software.

  Does anyone know the solution to this?

  Thank you

  Hi Neil, red giant have solved the problem. The question was my pilot being obsolete. Here's what they asked, in case someone else has the same problem. Try to download the update with your host (host's first pro) closed here is the link for the update obsolete driver who needs an update. Then restart your system and the host (first) and check to see if that fixes the problem.

  Thanks for your comments

• . MOV stops flashing between black and the video in first pro cc

  I have created a. MOV in Flash cc and after that I have to export, it works fine. But if I import it in first pro; about halfway through it starts glitching on years spend my video and a black background. No effects have been used. just resized video to fit the image. How can I fix it?

  Purple?

  No, I want to say is yellow, green or red?

  If its red or yellow he return green see if that improves things.

• image corrupted when a break in first pro cc after update Mac OSX El Capitan

  Anyone who has just updated for Mac OSX El Capitan, noticed in first Pro CC 2015?

  The picture is fine when I play it in the monitor source, but any film that I interrupt me seems to be corrupted:

  

  

  Hi Nicolas,.

  See the link below:

  Re: Why am I getting yellow and red lines running through my images on pause?

  Also, we have reported this problem and works on until time try the workaround.

  Vinay

• First Pro CC15 crashing when I fast forward

  I've seen many other messages talk how the first Pro CC 2015 to upgrade the causes of their version of first planting, but I didn't know all the messages with my precise cause of the accident. Whenever I have fast-forward on a clip in the Source window (especially when you see the audio waveforms), first fails because of a "serious mistake." Sometimes he tries to load an automatically saved version of the project, sometimes it isn't. It happens fairly regularly, but not 100% of the time.

  I have a few plugins to Red Giant installed, but I do not use them. Videos I'm editing are comments from pure product, so it's pretty simple editing - not crazy no effects, no timeline AE linked dynamically, just clips a Canon XF305, some PNGs and a file MXF audio wav. That's all. There are a handful of chronologies that are open at the same time, but they all have the same basic content.

  I'm in first Pro CC 2015.0.1 Release, v 9.0.1 (36) Build, so there is no update to what remains to be done. It's a pretty standard machine with a boost of RAM:

  Mac OSX 10.10.4

  3.2 GHz Quad - Core Intel Xeon processor

  32 GB OF RAM

  ATI Radeon HD 5770

  Can anyone help? Everyone knows the same problem?

  Hi N McLaughlin,

  Try this: turn off the Audio preferences > multichannel sum outputs Mono Source monitor & maintain acute during rewinding.

  Let us know if it works for you.

  Thank you

  Kevin

• video quality goes bad after adding an effect first pro 6! Help, please?

  Hello

  The video is getting screwed after adding effects first pro 6! effects as - Transitions, text etc. Please let me know what I should do to fix this problem.

  Thank you and best regards,

  Bilel

  The red line indicates your computer hardware will have trouble reading in real-time in the section which is red and not yellow. But it must export very well, it's something completely different for a smoother playback that you'll just have to lower the quality of reading to say 1/4. Currently I see in your monitor window of the program, just under the left hand of Mr.... together to 1/2. When you get off the parameters of playback quality degrades the quality of the image in the monitor, but smooth playback. Or affect the appearance of the exported file, just reading while editing.

  And Yes, visited a section of the timeline of the PrPro forces to create previews (only quality screen, no export quality) for the part of your sequence, you select and tell him to go. It then creates insights that can be used depending on your setting of playback quality (Full, 1 /, 1/4...) for a smooth and clean your clip with applied effects view. The effects of the change, you will need to perform a new render an article, of course.

  Neil

• First Pro CS5.5 quit unexpectedly. Mac 10.10.2.

  Hey there,

  My Mac has just started popping up with the box of 'first Pro CS5.5 close unexpectedly.  Nothing has been done differently and the program works for years.  Any help?

  My Mac is a 17 2011 "and currently has OSX Yosemite 10.10.2.

  

  Problem solved.

  I couldn't find the Colorista file for some reason any. I looked at red giant through Finder (the company that manufactures the Colorista) and there was an application uninstall program they provide. In this App Uninstaller was able to uninstall the Application Colorista. After uninstalling, everything works fine.  Thanks for the help guys!

• GoPro HERO4 Black - edition 4K on first Pro CC 2014.0.1

  Hello, I'm new to the GoPro, and we recently bought a black HERO4.  I am editing with first Pro CC 2014.0.1 on a MacBook Pro, form below:

  Intel Core i7 2.8 GHz

  16 GB 1600 MHz DDR3

  Graphics NVIDIA GeFore GT 750M 2048MB

  OS X 10.9.4 (13E28)

  I have no problem reading a file of RED R3D 5 K or 4K mov of a GH4 but I get reading jerky in a timeline first Pro of the GoPro even MP4 to 1080 Superview.  I was wondering if there is something that I have to be able to change the native MP4 files or I just transcode the GoPro to ProRes files in order to work with them in first Pro CC

  Ideas, help or suggestions would be greatly appreciated.  I have a desktop PC tough at home with roughly the same characteristics and I would test the images but the MacBook Pro and CC 2014 is my work Setup and I understand this point for the configuration of work if possible.

  Thank you

  -Erik

  All together, I've updated for first Pro CC 20141, build 8.1.0 (81) and I can now rub 4K images from the GoPro without problem.

• I first pro cs6 and try cc pro - it will interfere with my installation of cs6 if I decide to uninstall cc pro?

  I first pro cs6 and try cc pro - it will interfere with my installation of cs6 if I decide to uninstall cc pro?

  See the warning RED on page Tweakers.

  BTW, wait 18 months before trying CC and by continuing to use the CS6 you saved a lot of money. About $900 in the United States, but a huge $ 1500 in Europe. Congratulations on a wise decision.

• First Pro CC will not import ANY audio file, be it a mp3 or a part of a mp4 video (or other formats)

  Any audio or video file that I drop at first will appear almost immediately with the window

  Audio compliance error

  Movie compilation error.

  Unknown error.

  

  When I check the log error/events (little red X in the lower corner) this window says:

  ' 21/11/14 09:47:28 disc error has occurred while trying to access the following files:

  \\ipsse01\home$\myusername\AppData\Roaming\Adobe\Common\Media cache Files\filename.mp3 44100.cfa ".

  (The file is on my desk)

  This happens at all, even that current audio files windows comes with in the folder 'Sample Music', I tried those too to nothing does not.

  I am at a total loss. I'm new to first pro, but these are generic file formats, so I don't think that the problem is with the file. I have not tried to reinstall because I have to go to our one network administrator / computer specialist (who is also the accountant of the company) so that it can enter the username admin/pass in the pop-up box and she's often so busy. I try to avoid listening to it, if I do not need to (which unfortunately I tend to always have to do a lot)

  For reference, I'm under Win7 Professional 64-bit, 8 GB of RAM and a processor i7 - 4610M @ 3 .00GHz.

  Hey Kevin,

  I had earlier tried to do, but it still doesn't work. Then the company we use for large it projects, suggested pointing where media cache files are saved to a new location, excluding my sync account (which is always saved on my hard drive) and a folder on the hard disk that has not been synchronized with the network. That seemed to fix finally!

  Thanks for all the help and answers, if I really appreciate it!

  -Neila

• Violence flare plugin for first pro cc

  I need help, find a plugin to flare large lence 3d for first pro cc. Can someone direct me to the good things...   Thank you.

  The Light factory Knoll did what you are looking for. But I recommend that you do not work like this in AE. Finnish your edit and make post in AE stuff. You can also make your own transitions with the alpha of the AE and import video in PP.

  Red giant Knoll Light Factory 3.0 - products - - compatibility

  VIDEO COPILOT | After effects, Plug-ins, tutorials and stock footage for Post Production professional

• How is it that I have to make it EVERY TIME I have an effect in first Pro CC?

  I use the version of first Pro CC 7.2.2 (33) on a 2.9 GHz Intel Core i5 iMac with 24 GB of memory and an NVIDIA GeForce GTX 660 M 512 MB graphics card. The images I'm importing is ProRes 422 1920 x 1080 pixel square 24 progressive frames of images.

  When I place the clips on the timeline, they play without any problem. In fact, they play beautifully! However, whenever I have an effect, the clips must be rendered. Here's the biggest problem, however, each effect must be made and I don't even need to change the parameters of the effect. Just placing the effect on the clip causes a red line appears above my clip.

  Help!

  Hi Ephraim,

  I can understand why this can be confusing. Just because a clip has a red on it, usually useless line to make it. The clips play back smoothly? Here's more on what means the red line (index: it is not the same thing as the PCF).

  Red, yellow and green make bars and their significance

  Thank you

  Kevin