first problem of points

Similar Questions

• INSTALLATION OF ELEMENTS FIRST PROBLEM

  I recently installed Version 7.0 on an Adobe drive but when I open the program I get the following pop-up message: -.

  "A reduced set of content (themes of instant film, title and Menu Templates etc.) has been installed. To install the full content set, please insert your program DVD and run install Content.exe.

  
  

  If you do not have a DVD program please visit http / / www.adobe.com/support/downloads/productjsp?product=101platform=Windows to download the installation program content. »

  First of all when I run Content.exe install my computer can't find anything.  I searched all files on the disk but can't find anything not installed with the exception of the instant movie themes that later, I installed.

  Secondly, when I go to www.adobe.com/support etc, I get a message saying "sorry, this page is not available.

  Can anyone help please?

  Concerning

  PS This is my first time using this forum please excuse if I'm not using it correctly.

  Welcome to the forum. I think you will find us a friendly bunch and here to try to help.

  During the installation of media (not downloadable), regular installation should also install business content. If it doesn't, your method to do a separate install for functional content should then install. Functional content (Adobe name for the material of library) contains most of the DVD/BD menu, the themes/Instant film effects and Presets and also many more titles.

  It does not, either the initial installation, or with your secondary system is confusing. It should install seamlessly.

  A thought may be to download the content of functional files, as if you install from the download version. With a download, we need two files, the program, then the functional content and installation is then in separate facilities. I think that download pre 7 files are always at the link in this ARTICLE. Note: both files are archived and are in the format 7z. The files SHOULD be unpacked and their folder structure must be intact. Then, when the full Extraction has been completed, simply click on the executable. In the case with the downloadable version, you must first install the program (you already did that) and then install the separate functional content. It is possible that your media is damaged, and a point that affects the installation of business content. It was me, I'd get the functional content of download from Adobe site file and try that.

  Maybe someone else will have an idea, which is simply not come to me. Adobe technical support is free for installation problems, BUT I worry that pre 7 could not be filled, as PrE 8 has been out for about a year now. I don't know if they always manage pre 7 questions. In addition, Adobe has always had a good replacement of the damaged media policy, for a very nominal price. However, with pre 8 is the current version, I don't know if they're filtering alternatives for pre 7.

  Good luck

  Hunt

• First: problems

  Hi all!

  I got my new premium after Christmas 2015 and I have trouble with him...

  First of all, there is no STO > on the home screen, all the boxes are black.

  I can't type in the equations for the trace. It says number of bad argument, even when I take the manual examples!

  I tried to push the reset button, but the problem is still there! Any suggestion on what to do?

  Looks like you're in entry RPN mode.

  Could you try pressing:

  Early shift (to have domestic settings)

  Then in the original settings, select "Manual" in the selector to "enter".

• Dell latitude D-610 windows pack 3 service floor mat problems. Pointer freezes.

  My touchpad of Dell latitude D-610 does not often. The pointer will freeze for at least a few moments. I can sometimes resolve this problem for some time by putting the computer in standby mode and then resume the windows session. What can I do to fix this?

  Hello

  Download and update your http://supportapj.dell.com/support/downloads/driverslist.aspx?c=au&cs=audhs1&l=en&s=dhs&ServiceTag=&SystemID=LAT_PNT_PM_D610&os=WW1&osl=en&catid=&impidtouchpad drivers =

  Check if the problem persists, try to diagnosis of dell running from the dell cd and see if it's a hardware problem.

  I hope this helps.

• Problem of pointer to the top of the page turn mouse

  Hello, I have a HP Invent Lap Top, model computer HP G70 laptop with Windows Vista Home Premium.  Integrated the mouse pointer does not work above A CERTAIN POINT on screens online.  Do you know what could be causing this please?  I had the Lap Top new since February 2008

  Hello

  ·         Are you having similar problem when using an external mouse?

  ·         Online are which screens you referring?

  ·         Were there recent changes on the computer until it causes?

  I suggest you to install the most recent drivers touch pad from HP site.

  Please click on the following link:

  http://welcome.HP.com/country/us/en/support.html?pageDisplay=drivers

  See also:

   

  http://h10025.www1.HP.com/ewfrf/wc/document?LC=en&DLC=en&cc=us&DocName=c01876141&product=4051165&lang=en

• virtual miniport card wi fi has a driver problem AND keyboard filter does not have a pilot. When I trouble shoot for first problem I code 31__

  My virtual miniport card wi fi a driver problem, when I trouble shoot it said windows cannot reinstall pilot 31 code.  And the filter of my keyboard doesn't have a driver!  It is a laptop brand new which had no problem a few days ago.

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And don't forget, it is under warranty.

  See you soon.

  Mick Murphy - Microsoft partner

• BlackBerry Smartphones Android 6.0 first problems

  Buenos dias, ayer actualice mi Priv con Android 6.0, back links editor of captured pantalla in donde is can observar los problemas is completed. First no estan running some widgets, ayer, arranco el equipo no flight cuando y hacer luego a reset flight, pero hoy no how of nuevo, tanto el hecho is reset again no how. Otro lost are in Quebec no permite ver todas las options config Escalin acceso rapido, asi como pestana is ve en the foto, no is can bajar para ver las options ni con pantalla tactil ni con el teclado.

  https://www.dropbox.com/s/zmw232zyyc29zbt/Screenshot_20160427-074543.PNG?DL=0

  https://www.dropbox.com/s/npda22ib8d1dffo/Screenshot_20160427-080308.PNG?DL=0

  MUCHAS gracias.

  Hi @Cristian2

  What app widgets do not work? I tried a "weather" in the game store but couldn't find anything.

  Have you checked the client apps so to see others using Marshmallow are having problems? Some applications if the developer has not updated them may not work on the marshmallow with manual update of the permissions. For this application, in particular, check the permissions. To do this, go to settings > applications, tap on the app and in permissions check permissions are enabled.

  For the productivity tab number, what is your font size set to? To check, go to settings > display

  Whether its large or huge, normal value and see if you can adjust the parameters, and then return to big or huge.

• My first problem of java exception program (helloworld)

  Hello

  I am very new to java programming for blackberry, and I read an e-book - blackberry for beginners.

  OK, for the moment... I currently have 3 files in/src /...

  HelloWorldApp.java

  package com.beginningblackberry;

  Import net.rim.device.api.ui.UiApplication;

  SerializableAttribute public class HelloWorldApp extends UiApplication {}

  public HelloWorldApp() {}
  TODO auto-generated constructor stub
  Screen HelloWorldMainScreen = new HelloWorldMainScreen();
  pushScreen (mainScreen);
  }

  /**
  @param args
  */
  Public Shared Sub main (String [] args) {}
  TODO self-generating method stub
  HelloWorldApp app = new HelloWorldApp();
  app.enterEventDispatcher ();
  }

  }

  -------------------------------------

  HelloWorldMainScreen.java

  package com.beginningblackberry;

  Import net.rim.device.api.ui.component.LabelField;
  Import net.rim.device.api.ui.container.MainScreen;

  SerializableAttribute public class HelloWorldMainScreen extends form {}
      
  private LabelField labelField;
      
  public HelloWorldMainScreen() {}
  LabelField labelField = new LabelField ("Hello World");
  Add (labelField);
  Thread MainScreenUpdaterThread = new MainScreenUpdaterThread (this);
  thread. Start();
  }
      
  {} public void appendLabelText (String text)
          
  labelField.setText (labelField.getText () + "\n" + text);
  }
  }

  ---------------------------------------------------

  MainScreenUpdaterThread.java

  package com.beginningblackberry;

  Import net.rim.device.api.ui.UiApplication;

  SerializableAttribute public class MainScreenUpdaterThread extends Thread {}
      
  HelloWorldMainScreen screen;
      
  public MainScreenUpdaterThread (screen HelloWorldMainScreen) {}
  this.mainScreen = screen;
  }

  public void run() {}
  for (int i = 0; i)< 10;="" i++)="">
  try {}
  Thread.Sleep (5000);
  } catch (InterruptedException ex) {}
  }
              
  Queue a task on the event thread
  UiApplication.getUiApplication () .invokeLater (new Runnable() {}
  public void run() {}
  mainScreen.appendLabelText ("Update");
  }
  });
  }
  }
  }

  ----------------------------------------------------

  Okay, that's all the code I wrote so far according to the book it should display "Hello World" - and he does, but when 5 s passes, I get an error 104 of the JVM, the null eception exception pointer, but he should update my screen with "Update" every 5 seconds.

  I am writing my code word by Word, to learn as much as possible, but I have no idea how to solve this problem yet

  any advice would be greatly appreciated.

  BR

  It is here:

  public HelloWorldMainScreen() {}
  LabelField labelField = new LabelField ("Hello World");
  Add (labelField);
  Thread MainScreenUpdaterThread = new MainScreenUpdaterThread (this);
  thread. Start();
  }

  local variable hides the field from the class. Replace:

  public HelloWorldMainScreen() {}
  labelField = new LabelField ("Hello World");
  Add (labelField);
  Thread MainScreenUpdaterThread = new MainScreenUpdaterThread (this);
  thread. Start();
  }

• Problem of points of termination/Jabber presence

  Hello

  We encountered a problem on the publication of presence of endpoints and jabber via Highway VCS.

  These points of termination/jabber who are registered on the SCV - C do not publish "online" status, or a green icon on the phone book of the jabber, which is recorded on the VCS-E.

  Also the two jabber users registered on VCS - E even publishes state of evil presence. It displays 'offline' even that they are on VCS and connection status is set on the jabber client.

  No questions on the points of termination/jabber only recorded on VCS - C.

  Jabber client registered on the VCS-E may appeal to the point of termination/jabber registered on the VCS - C and vice versa.

  The VCS configuration - C and presence of VCS - E:

  User agent SIP Simple presence: 'ON '.

  By default the State published the saved settings: 'online '.

  Server SIP of SIMPLE presence: 'On '.

  User agent of presence and the State of the presence on the two VCS server are active.

  Thank you very much for the help.

  BR,

  Acevirgil

  Hello

  You must have the presence server enabled on VCS - C. The AUP should be enabled on VCS - C and VCS-E.

  Using FindMe?

  / Magnus

• Card problem OBIEE - points on the map illustrated with two different images.

  VI have obiee 11.1.1.7.1 where we have an analysis with a card.

  The base map and the theme is created in 11.1.1.7.3 mapbuilder.

  VI have a variable shape layer in the OBIEE plan. The shape is a circle, and has four different locations (using four different colors to show the differences).

  A query can show 20-30 positions on the map.

  So far so good.

  When we run the analysis, the following occurs:

  1. circles of 20-30 (with one of four different colors) are presented correctly on the map. These results appear directly on the map once we click on "Apply"

  2 an hourglass appears and we will have to wait for 20 to 60 seconds.

  3 then an "x" appears in each of the 20-30 circles and the hourglass disappears. The 'x' is the mapbuilder theme that we created if we do not have any Style 'Render' associated with the Style. If we have a rendering style, for example a simple small point, this point then appears with the circle.

  Our question is how we can force mapbuilder for not making the 'x' in the map. That's where we get terrible response time.

  
  

  Best regards

  Joel
  

  We have solved the problem using only the datawharehouse data to generate BI data layers.

  We have created a new BI data layers using variable forms. Then, we chose a layer of bridge custom rather than use the MapBuilder theme that we created earlier. Then, we used the points Long/Lat for the generation x and y.

• Adobe elements 12 program first problem opening

  Hello

  I have Adobe items 12 who worked FOR environment 10 days now at the June opening window indicates

  . problem United Nations made in Quebec the trabalho room constantly United Nations program t windows will fe program EC sea

  What is going on?
  

  Ocho 3546

  The button translate here (French to English) and Google Translate have problems with what you have written in French.

  Could you please write in English or with another description in French.

  I understand that you have first of 12 elements. What operating system is running your 12 items first?

  You have problems to open the program from the desktop icon? Or you have problems to open an existing project? You can open a new project? What error messages, if any, are associated with your problems of Premiere Elements.

  Please give as much detail as possible.

  Thank you.

  RTA

• The scale and the relationship between the problem of points

  I had a few problems with setting the scale of the objects and their appearance before and after the scaling.

  The relationship between the points change when I change things, and it's a little embarrassing.

  Before that I put across that circle with an arrow, it looked like this:

  

  Then after that I put across it, the lines on the arrow were not in place:

  

  It happens very often when I am scaling of paths in illustrator. Is there something I can do to prevent it? Often I make things evolve upwards or downwards and it is a little painful when I know I'm going to screw up the path.

  

  

  Go to the drop down at the top right of the Panel processing and disable "Align new objects to the pixel grid."

  Edit: If you select 'Web' in the new Document dialog box, "Align new objects of pixel grid" is enabled by default, at the bottom of the box. You can choose to disable it there before OK-ing the creation of the document.

• First problem with the flow

  Hello
  
  This is my first time using stream so maybe my questions are stupid... I have a knot two CARS in 10.2.0.4 with all patches necessary to use Oracle Streams (10.2.0.4.4 to be exact). This CAR has a few tables I need to reproduce a few columns. Aproach first mi was by using the following code to test an example of a table with three columns and remove from the lcr two of them.
  
  create or replace function removecolumns (inAnyData in SYS. AnyData)
  RETURN SYS. AnyData IS
  
  RET pls_integer;
  typelcr VARCHAR2 (61);
  lcrOut SYS. LCR$ _ROW_RECORD;
  SYS v_col3_old_anydata. AnyData;
  SYS v_col3_new_anydata. AnyData;
  v_col3_old_str varchar2 (512);
  v_col3_new_str varchar2 (512);
  
  
  
  BEGIN
  
  typelcr: = inAnyData.getTypeName ();
  IF typelcr = ' SYS. LCR$ _ROW_RECORD' THEN
  RET: = inAnyData.GetObject (lcrOut);
  IF lcrOut.get_object_owner () = "SCOTT" THEN
  IF lcrOut.get_object_name () = "T6" THEN lcrout.
  lcrout.delete_column('COL2','*');
  lcrout.delete_column('COL3','*');
  RETURN SYS. AnyData.ConvertObject (lcrOut);
  END IF;
  END IF;
  end if;
  RETURN inAnyData;
  END;
  
  
  This first replication has been for the entire schema (it's my first test...). The problem appears when I try an LMD. The error in the log of alerts from the node in which I am connected is:
  
  
  LOGMINER: Begin mining logfile for session 1 thread 2 sequence 22, +DATA/probid/onlinelog/group_4.266.735925225
  Thu Dec 2 17:51:21 2010
  Errors in the /u01/app/oracle/product/10.2.0/db_1/admin/probid/bdump/probid1_c001_4950.trc file:
  ORA-23607: invalid column "COL2".
  ORA-06512: at "SYS." "LCR$ _ROW_RECORD ', line 325
  ORA-06512: at "STRMADMIN. REMOVECOLUMNS", line 21
  ORA-06512: at line 1
  Thu Dec 2 17:51:24 2010
  C001 CAPTURE stream with pid = 32, OS id = 4950 order
  Thu Dec 2 17:51:24 2010
  Errors in the /u01/app/oracle/product/10.2.0/db_1/admin/probid/bdump/probid1_c001_4950.trc file:
  ORA-23607: invalid column 'COL3 '.
  ORA-06512: at "SYS." "LCR$ _ROW_RECORD ', line 325
  ORA-06512: at "STRMADMIN. REMOVECOLUMNS", line 21
  ORA-06512: at line 1
  
  
  Extrange most, is that the update works fine until I have create the COL3 column on source (and col2 already existed), it is then replicated to the target. Target database, I remove the COL3 column and try and insertion, it is the moment in which the error.
  
  I have two questions,
  -Suggest this error?
  -How should I focus this replication with a set of tables and a few columns in the target? I used only one capture-replicate-apply process and I think that I dno not need more. If it is possible I wouldn like to use dbms_streams_adm, or apply DML handler to solve the problem...
  
  TKS.
  
  Published by: user12046001 on 02/Dec/2010 13:17

  For a discussion on DML_HANDLER and DDL_HANDLER, you can start reading

  http://www.smenu.org/tutorial_streams_15_dmlh.html

  I stress the difference in between the MANAGER and the Manager of ERRORS

  The following Oracle Documentation is a must to follow.

  Regarding the tests on the presence of a column in a CSF, one can easily write this:

  create or replace function removecolumns (inAnyData in SYS.AnyData)
  RETURN SYS.AnyData IS
  
     oldColList         SYS.LCR$_ROW_LIST;
     lcr              SYS.LCR$_ROW_RECORD;
     OldCols        VARCHAR2(2000):='';
  
   .
   .
  Begin
     IF typelcr = 'SYS.LCR$_ROW_RECORD' THEN
          ret := inAnyData.GetObject(lcr); 
  
         oldColList:= lcr.get_values('OLD');
         FOR i IN 1..oldColList.Count
         LOOP
            OldCols:= oldColList(i).column_name;
               if OldCols = 'COL3' then
                   lcr.delete_column('COL3','*')
              end if;
         END LOOP;
  
         .
         .
         .
  
  end ;
  

• Import of AE Comp in first problem

  Hello. I, m trying to import a short animation (30 sec) made in its effects in the first. The sizes of images from these two projects are the same, but the composition of EI is tense when I import it.

  Parameters of sequence first 5.5-

  Mode - edit HDV 1080i

  Time - base 25.00 FPS

  Image - size 1440 x 1080 16:9

  Format of the pixels - HD 1080 (1.333) anamorphic

  Fields - high fields first

  Show format - 25 fps Timecode

  After Effects 5.5 composition settings.

  Preset - HDV 1080 25

  Image - size 1440 x 1080

  Format of the pixels - HDV 1080/DVCPRO HD 720 (1.33)

  Format - 16:9 (1.78)

  Rate - 25

  Resolution - complete (1440 x 1080, 5.9 MB per image 8bpc)

  System-

  Windows 7 Professional

  Intel Xeon E5630 @ 2.53 GHz X 4 processors CPU

  6.00 GB RAM

  64-bit operating system

  NVIDIA Quadro FX 1800

  I know it's probably something really basic, but I'm new to this game and tried to search but did not find the same problem everywhere. Thank you.

  Before filling your comp in AE with layers, you must assign the format of pixels.

  It is the fifth button on the right in the window of the model.

• Portege Z30t-A-11U problem of point fingerprint reader Windows 8.1

  Hello

  I have problem with player figerprint on portege Z30t-A-11U - in Windows 8.1 PRO
  It comes from the outset - (System factory pre-installed)

  Several times a week does not fingerprint reader in the morning or after the awakening of the laptop. (connection icon is not at this time see - the drive does not work even after a manual connection)

  Thanks in advance.

  Frantisek

  If this question of the fingerprint will not happen always, but only from time to time, then the troubleshooting will be very difficult
  These occasional problems are always tricky
  Anyway, if you haven't tried updating the software of the fingerprint in the past, I recommend you to do

  In addition, please check if the fingerprint sensor has been enabled in the BIOS.

  

  If this isn't the case, activate the fingerprint and save changes to the BIOS.