Fix auto assistance window &

Similar Questions

• Ideas: Insert an error code or give a brief description of what you are trying to accomplish or fix.__Failures install windows update for Windows 7 for x 64-based systems (KB2345886)

  I'm having problems with my HP laptop and updated KB2345886 who don't want to not install. I reinstalled it and to start my computer it goes up to 75% and fails.  I ran will fix problems with Windows Update but troubleshooting couldn't identify the problem. I can't go back to restore Windows installed date of origin being on 15 October. When the update ran for the first time it was looking for Microsoft Works 9.0 disk I did not because it was preinstalled on my computer. I cancelled and uninstalled the app, but I still get the error. I don't know if the update is looking for a component of Microsoft Works 9.0 in the registry.

  Additional information:

  Update for Windows 7 for x 64-based systems (KB2345886)

  "WindowsUpdate_8007000D" "WindowsUpdate_dt000"

  Update for Windows 7 for x 64-based systems (KB2345886)

  Installation date:? 11 /? 24 /? 2010 11:39

  Installation status: failed

  Error details: Code 80004005

  Update type: Important

  Install this update to help strengthen authentication information in specific scenarios.

  After you install this item, you may have to restart your computer.

  Help, please.

  Thank you.

  Jesus Romero

  (And Norton) McAfee applications are known to not uninstall (or upgraded) themselves.

  1. download the McAfee Consumer Product Removal, save it to your desktop tool: http://download.mcafee.com/products/licensed/cust_support_patches/MCPR.exe

  2. close all open applications (that is, anything with an icon on the taskbar).

  3. click right on the file saved in #1 above, and then select run as administrator to run the utility. DO TAP not your keyboard until the race ends, then restart.

  4 reset the IE8 advanced settings by http://windows.microsoft.com/en-US/windows7/Reset-Internet-Explorer-settings

  5. open IE8 32 bit (only!) to http://support.microsoft.com/kb/971058 & run it in DEFAULT and modes difficulty then AGGRESSIVE. [1]

  6. restart a last time & test.

  ~~~~~~~~~~~~~~~~~~~~~~~~
  [1] full Disclosure: the difficulty operating in AGGRESSIVE mode will remove your update history but not the list of installed updates.

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install?

  Problems of updates Windows XP - how to fix the incorrect Windows XP updates KB2633952 keep asking to install? True, it is that it is already installed on your computer. If hide us, an another previous KB2570791 arises in our updates of Windows and asked to install anything, that it was installed... of the questions repeated and very annoying.  Help, please!

  (Microsoft Answers just sent us message have deleted our previous thread, ask for help!) We are simply not that these problems are problems with Windows XP updates related to DST or not?)

  Nadia. PA supporter said that your computer is hacked. He may be right. I can't weigh because I don't know what led him to this conclusion. If your computer is hijacked, then you should address that more that you need to fix this minor update. However, under the resolution of your problem to update, you can try this:

  Assume Windows XP

  Check the C:\Windows\System32\ directory for the presence of the file tzchange.exe

  If the file is not present or if the version of the file is not 5.1.2600.6171 or newer...

  Download the update appropriate 2633952 for your platform here:

  http://support.Microsoft.com/kb/2633952

  Run with - extract switch (e.g., Start > run > "[path to the downloaded file] \WindowsXP-KB2633952-x86-ENU.exe"-x)

  Of course, replace [path to the downloaded file] with the path to the downloaded file.

  Citations may or may not be required depending on the path. Place the x - out the citations if you use them.

  Choose a location for the extracted files (a new folder is recommended)

  Locate the extracted files. File tzchange.exe you want and copy it into C:\windows\System32

  That rerun Windows Update detection to see if the problem is resolved.

• How can I fix a popup window that says 'media usage rights acquisition' whenever I try to use my windows media player?

  How can I fix a popup window that says 'media usage rights acquisition' whenever I try to use my windows media player. Please answer!

  Whenever I try to use my windows media player I get a popup error that says "acquisition of rights of use media, error, Ref # 97.1e941645.1303713359.fefdlfe.» How can I solve this problem? Help, please.

  What version of WMP are you using? When exactly do you get this error?

  If you use Internet Explorer to access http://drmlicense.one.microsoft.com/Indivsiteand click on the upgrade button, which helps?

• How to fix - error 80073712 - windows component store is corrupt - after correctly installing the system update tool for windows vista.

  I get the error code 80073712 - windows component store is damaged - when you try to install windows vista SP1 and also the Cumulative security update to explore 7 (KB978207). Fails every time.

  I followed the advice and installed the system update tool for Windows Vista (does this twice), but still cannot download and install updates - get error 80073712.

  How can I fix the corrupted windows components store?

  Thank you

  Dan

  CMDC,
  If the SFC was not able to repair files then the best thing to do is to reinstall Windows.  You can try running a disk error check, if it fixes all of the problems, and then rerun the SFC and then install and run the System Update tool.  If there is still a problem with the SFC nto be able to complete then you should do a reinstall.

  Mike - Engineer Support Microsoft Answers
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to fix and clean Windows registry

  I want to know toll-free how Fix and clean Windows registry and repair registry problems with a tool:

  Easily open/repair. DRF files

  Optimize and increase the performance of the PC (up to 150%)

  Protect privacy and files everything online

  Start and stop more quickly

  Eliminate and prevent most accidents

  Eliminate the computer slowdowns

  Protection against malware

  Note: I use the Version of Microsoft Windows Vista Ultimate 32-bit.

  Hopefully I can get the help I need.

  e-mail: * address email is removed from the privacy *

  They are never recommended by Miscrosoft, but MS himself admits this register of overtime fills and creates problems. Registry Cleaner, I think, is the only one built in the MS utility missing in its operating systems.

  Microsoft Windows Live OneCare safety scanner had a free registry cleaner .

  As you can see live One Care has been abandoned

  And read this information and the views of these Forums on registry cleaners:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-performance/is-there-a-Microsoft-licensed-registry-cleaner-i/b03cd0ad-A92C-41B2-9bf0-b7be06c43047

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_xp-networking/does-Microsoft-have-a-software-that-cleans-repairs/4545749b-3c3e-41bf-8f9a-326a58135088

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/which-is-the-best-registry-cleaner-for-Vista/cb1d3b65-4396-4A42-b83c-a1db7602ba06

  See you soon.

• How can I fix a corrupted windows media player?

  How can I fix a corrupted Windows windows media player 7, it constantly downloads all the images of every web page I visit? It also regenerates files I tried to delete repeatedly, they KEEP COMING BACK! I can't do it without help to fix it and security essentials says I'm okay, wtf! I need help fixing my computer. its almost like its stuff display that should be in a hidden folder, so I don't see them, but nothing I tried removed weird pictures as well as unwanted baby boy and baby girl files from my pc

  Click the Start button and type in the browser box, change the temporary Internet files settings and into the House.

  Go to the section of the Advanced tab, scroll all the way down and check the box that says (empty temporary Internet files when browser is closed), apply and OK or save.

• Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Original title: Mr

  Acer aspire 5600U, auto repair, windows could not load correctly, restore is not started

  Hello

  Here are the instructions Acer for recovery to factory settings, new condition.

  Select Windows 8.1 it.

  "Using Acer eRecovery application to restore your system or to create a recovery media.

  http://Acer.custhelp.com/app/answers/detail/A_ID/29934/~/use-Acer-eRecovery-application-to-restore-your-system-or-create-recovery-media

  ACERS use these keys for years.

  http://Acer.custhelp.com/app/answers/detail/A_ID/35232/session/L2F2LzEvdGltZS8xNDQ0ODg5NTczL3NpZC9jRmhXNC15bQ%3D%3D

  See you soon.

• HP Pavilion Notebook PC g6: HP Support Assistant Windows 10 questions

  Op system was previously bfr Windows 7 update to Windows 10 in Dec2015. Since then, have never been able to open HP Support Assistant. Am constantly pop-up "HPSF.exe has stopped working. The app has encountered a serious problem and needs to close. »

  I tried to uninstall HP Support Assistant, and I also tried to install latest HP Support Assistant without uninstalling the existing HPSA and the RRs, the following error message "the component you are trying to use is on a resource not available network. Click OK to try again or enter a different path to the folder containing installation pkg "HP Support Assistant.msi" in the box below. I found two files in my C: drive containing this file, but RRs andother error 'the path "C:\ProgramData\{18165758-115C-4DC0-9EC2-FF89F725767F}\HP Support Assistant.msi" was not found. ((Or I get another error that says that the file is not a valid installation for the product package)) Make sure you have access to this location and try again, or try to find the installation package "HP Support Assistant.msi" in a folder that can install the HP Support Assistant product. If I click on 'Cancel' and RRs another error HPSA "error 1714. Cannot remove the old version of HPSA. Contact the technical support.

  Need help, am at a loss on how to fix me:.

  My problem is finally solved! Thanks to another thread.

  http://h30434.www3.HP.com/T5/notebook-operating-system-and-recovery/HP-support-assistant-doesn-t-work-in-Windows-10/TD-p/5238243

  morgane_1771 suggestion to try revo uninstaller and then reinstall HP Support Assistant worked!

• Tecra S10-142 - how to fix touch Assist from Toshiba?

  I have a Tecra S10-142, with Windows XP.

  The * Toshiba assist button * does not work because this utility is not loaded at startup.
  What can I do to fix it? Where can I find the drivers to install this utility?

  Thank you

  Hello

  I agree with the user above. You must install or reinstall Toshiba Assist, which can be downloaded from the Toshiba page.

  The installation should be performed in a few clicks only, and maybe you have to restart the laptop. After that, it should work.
  Can you confirm this?

• How to fix bisoncam in windows XP (3)

  Problems with my computer so I did a system repair, repair of the system fixed my problem, but lost Bisoncam?

  Hi Daniel,

  Thank you for writing to Microsoft Communities. From your problem description, I understand that you can not use your webcam. Please correct me if I misunderstood.

  Daniel , I understand how it could be frustrating when things do not work as expected. Please, I beg you, don't worry I'll try my best to resolve the issue.

  Until we start troubleshooting on this issue please provides us with additional information by answering a few questions below, this will help us better solutions to the problems.

  1. What is the number of brand and model of your computer

  2 did you change on your computer before the show?

  3. you receive an error message or code while turning on your webcam?

  4. is the webcam connected internal or external to your computer?

  Please follow the steps mentioned below:

  a. make sure that your webcam is firmly plugged into a USB port free and functional on your computer. If your computer is not recognizing your webcam, try connecting on another USB port or another computer altogether. If it works in another port or on a different computer you were trying to use port USB does not work.

  b. ensure that you have installed all the necessary software. Often the webcams come packaged with a CD-ROM filled with necessary software such as drivers. This software is necessary for your webcam work with Windows XP. Install any software that may be necessary and restart your computer.

  c. confirm that the program that you try to use your webcam with the support and is configured correctly. With the help of a webcam with software such as Yahoo! Messenger does not work automatically. Go into the settings of the program and make sure that it is properly configured to work in conjunction with a webcam.

  d. ensure that Windows XP is up to date with the latest drivers and software. Click on the "Start" menu and then on the "Windows Update" icon to download and install available updates more recent for Windows. Without these updates of some external devices, such as webcams, may not work.

  Please complete all of the recommended steps and if after following the steps to issue still persists, please come back to us and we will be happy to provide you with additional options available that you can use to get this problem is solved.

  If you are unable to perform the steps mentioned above, I recommend you to contact our live support by clicking on the link http://support.microsoft.com/common/international.aspx?RDPATH=dm;en-us;selectassist&target=assistance

• Auto-install Windows 7 update - each time approval message "Setup."

  Something seems to not work properly.  I chose the automatic download of the updates to the Windows 7 Home version.  They have always installed when I shut down the computer.  Now, every time I shut down my computer systems ZT I get the automatic message updates are installed and to not cut food.  Apparently, there is something wrong.  Any suggestions on how to fix?   This happened last month.  Thank you.

  Hi NYNJ.

  If you still receive the message to not turn off the computer, as updates are being configured or to proceed with the installation, you can try the following methods and check if the problem persists.

  Method 1:

  Try to run the next fixit and try to install all pending updates.

  The problem with Microsoft Windows Update is not working

  If the fixit does not help try to reset components Windows as shown in the following link:

  How to reset the Windows Update components?

  Note: Don't forget to re-enable services, as shown in the link above.

  Method 2:

  If method 1 does not work, follow these steps:

  1. Browse to the location: C:\Windows\winsxs.
  2. Find and rename the pending.xml pending.oldfile name.
  3. Restart your computer and search for the issue.

     Note: The steps above are for Windows installed on drive C:. If your Windows is installed in a different drive, please substitute the respective drive letter "C:".

  Please try these steps and check if the problem persists. After back with your results for assistance, we will be happy to help you.

• «View log...» ", tools->"copy the file... ". "Auto close windows journal

  We use 11i on sun solaris.
  
  I am not able to do "tools-> copy file...". "on the log file, the internet Explorer popup and auto close immediately.
  
  no problem with the copy of the file to the output file, it works accordingly.
  
  How to solve this problem?

  shng wrote:
  We use 11i on sun solaris.

  I am not able to do "tools of-> it copy the file...". "on the log file, the internet Explorer window and auto close immediately.

  no problem with the copy of the file to the output file, it works accordingly.

  How to solve this problem?

  Add the URL of the application to the trusted sites list and disable pop-up blockers. In addition, please confirm that you have no errors in the database log file.

  Tools > copy function to Notepad [ID 176023.1] downloads
  Tools: "copy file...". "Fails to copy a complete simultaneous report output file [ID 835620.1]
  How to fix internal server error when you use the feature to copy file [986935.1 ID]
  Implementation of Word or Excel as an Option of the observer [178133.1 ID]

  Thank you
  Hussein

• Using the smart fix auto in PSE 8 on a Mac

  I HAVE PSE 5 INSTALLED ON A DESKTOP WINDOWS PC.  ONE OF THE FEATURES I LIKE IS THE ABILITY TO AUTO SMART DIFFICULTY SEVERAL PHOTOS.  I BOUGHT A MACBOOK PRO WITH PSE 8 DEFINED AS EXTERNAL EDITOR IN IPHOTO.  DOES ANYONE KNOW HOW TO ACCOMPLISH THE SAME THING IN IPHOTO?  I CAN SMART DOES DIFFICULTY ONLY ONE PHOTO AT A TIME.  IF I COME BACK FROM A TRIP WITH 100 PHOTOS, IT IS A LOT OF YOUR TIME TO CORRECT ALL PHOTOS.

  You cannot run fix smart car on several photos at once.

• HP Support Assistant: Windows install you seek support Assistant.msi - HP Support Assistant already installed

  HP Support Assistant is installed on my laptop.   However, at startup, Windows Installer tries to find HP Support Assistant.msi how can I get rid of this message of Windows Installer?

  I was able to solve the problem.  I have removed HP Support Assistant and then restarted windows several times and then reinstalled HP Support Assistant.  Support Assistant works very well and I don't get the error from the installer.  Problem solved.  Thanks for the help. ... Jim