Tecra S10-142 - how to fix touch Assist from Toshiba?

I have a Tecra S10-142, with Windows XP.

The * Toshiba assist button * does not work because this utility is not loaded at startup.
What can I do to fix it? Where can I find the drivers to install this utility?

Thank you

Hello

I agree with the user above. You must install or reinstall Toshiba Assist, which can be downloaded from the Toshiba page.

The installation should be performed in a few clicks only, and maybe you have to restart the laptop. After that, it should work.
Can you confirm this?

Tags: Toshiba

Similar Questions

  • Tecra S10 - 11W: how to uninstall Win XP SP3

    I have successfully completed my Tecra S10 - 11W from Vista to XP with the recovery CD
    But since XP SP3 (had) problems with some software I want to uninstall it and install SP2.
    But even with the information from the Microsoft Web site, I was unable to uninstall SP3!

    Hello

    I put t know if it would be possible to remove the SP3 if it was not previously installed.
    But I found that MS document:

    + How to remove Windows XP Service Pack 3 from your computer.
    http://support.Microsoft.com/kb/950249

    Perhaps, it might be useful.

  • How to remove the application from Toshiba?

    Hello

    I registered my laptop when I got it, but since then, I always get a message from toshiba on the recording of my computer laptop-how can I remove this bit pre-installed program?

    Christian

    Remove it like any other pre-installed application Control Panel programs and features. There you should find it. Mark and go to uninstall.

    By the way: I hope you recorded your laptop.

  • How to fix explorer.exe from constant grave failure?

    AppName: explorer.exe AppVer: 6.0.2900.5512 ModName: unknown<><  is="" the="" error="" code="" it="" gives.="" it="" crashes="" when="" usually="" when="" i="" try="" to="" open="" or="" rename="" a="" file="" with="" a="" long="" name,="" or="" there="" are="" files="" with="" long="" names="" in="" the="" folder. ="" running="" xp="" sp3="" on="" a="" dell="" dimension="">

    First, you must run some respectable malware scanners to try to reduce the risk of malware infection.

    Secondly, you should tell us about your system.

    Thirdly, if the Windows Explorer (not Internet Explorer) crashes when you right-click on a file or folder, the problem usually happens as a shell extension for Explorer that you added some third-party programs or an extension of the Explorer shell that could be added without your knowledge.

    Explorer shell extensions make up right click menu when you right-click things (such as open, rename, etc) and there are a lot of extensions to explore afflicted that can cause an accident.  I hope you're able to repeat this crash when you want by doing something that you do.  If you can do explore crash when you want, it is usually easy to understand the problem.

    You don't describe symptoms suggestive of a need to run the System File Checker, but of course, you can if you wish, but note that if you have a genuine XP installation CD bootable with the same Service Pack as your installed Service (most people don't), the System File Checker will complain - much.

    No matter what you use for malware protection, follow these steps:

    Download, install, update and do a quick scan (not at the same time) with these free malware detection programs:
    SUPERAntiSpyware: (SAS): http://www.superantispyware.com/

    SAS will probably be just a bunch of Internet tracking cookies, but you can remove them.  Once you have done at least a full analysis, you can do quick scans in the future to save time and save the analyses complete for when you have more time or are really suspicious of an infection of the system.

    They can be uninstalled later if you wish.

    Since the implementation of the Microsoft Answers forum does not ask for any kind of information system when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

    Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

    Provide information on your system, the better you can:

    What is your system brand and model?

    What is your Version of XP and the Service Pack?

    Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

    What do you see (exactly) that you don't think you should see, and when you see it?

    What do not you think that you should see?

    If the system works, what do you think might have changed since the last time it did not work properly?

    Now the fun part:

    When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

    Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

    Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song...).

    If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

    First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of installed non-Microsoft extensions you don't know even being given that some installed software installs new without tell you about it.

    Download ShellExView here to see what Explorer extensions you have loaded:

    http://www.NirSoft.NET/utils/shexview.html

    ShellExView does not install anything on your computer, simply of runs and displays.

    After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

    Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

    Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.  Suspicious extensions are non-Microsoft extensions.

    You can also Google the name of a suspect add-on and see if there is any success on the mistakes and what other people have done about it.

    You can Google something like:

    Explorer XP crashing (you must fill in the name of add your suspect on.)

    See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

    I'm not a defender of trial and error, but I can't think of another way to do...

    Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish.  Disabling the extension does not uninstall the extension - it just disables it.

    The result of the change is immediate and no reboot is necessary.

    Test your right-click fault condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

    If you recognize all the extensions that have been added or recently downloaded, start with these first.

    Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.  In this way, you can switch back and forth, enabled to be sure, you have the right extension under control.

    Disable them one at a time until your right click on do not generate an error, then restart and test again to make sure the changes 'stick '.  You have disabled the last extension would be suspicious.

    You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

    If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

    The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

    I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

    If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

    If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

  • How to fix .muse file from PC to Mac and vice versa giving response "damaged file"?

    Hello guys, once again

    I just started working on a simple website in Muse on a PC and at some point, I've uploaded on my Mac and wanted to continue. Instead of loading the file, I received a message "cannot open, damaged... file. ». Did not know what to do so I started the same site from scratch on Mac. I came up to a certain point in the design, then I save the file and I put the file on a USB key to continue my work on PC. Now, I get the same message.

    Can someone help with this problem? THX.

    Muse versions are the same.

    Marko

    Hi Marko,

    I was able to open the file on the PC, both Windows and Mac. However, I was unable to open the MAC file in both. The message "file corrupted". I sent the MAC file to you. Please check whether or not you are able to open it.

    Kind regards

    Aish

  • How to remove the shortcut from Toshiba offers?

    I got a new computer, and it had a link to "Toshiba offers" in the start menu. I managed to delete the icon and the file but the link is still there and I can't find out how to get rid of. Here is a picture. If he were anywhere else on the start bar, I know how to get rid of it but don't here.

    http://imagesocket.com/view/annoying.JPGba3.jpg

    Does anyone know how I could get rid of this?

    Edit: I don't know if that makes a difference, but I am using Windows Media Center.

    Hello

    You may have a possible for you the problem. Make a start from the queue manager, you select all programs and remove offers Toshiba Point.

    By

  • Windows7 for Tecra S10

    I have Tecra S10 - 11A.
    My laptop supports windows 7? If that's what about additional programs as utility HARD drive protection, software fingerprint, pc monitor.

    Where can I download them?

    According to information document http://aps2.toshiba-tro.de/kb0/TSB9902P50000R01.htm Toshiba Tecra S10 is Win7 supported.
    I checked the Toshiba Win7 download under http://eu.computers.toshiba-europe.com/innovation/windows7_drivers.jsp page and your laptop model is still not listed there.
    Occasionally check this page to see if the drivers are available.

    For models Toshiba laptops will offer all the drivers, tools and utilities for Win7. So you will not have problems to run all the things you asked for.

  • How to fix corupt fileC:Documents and Settings\Victoria\Local Settings\Temp\toolbar_log.text also known as vprot.exe is file corrupted how can I do

    vprot.exe is the corrupted file, how to fix

    [Moved from comments]

    Hello

    (1) did you make any changes before the show?

    (2) which you use Windows operating sytem?

    (3) who is the program antivirus installed on the computer?

    Vprotection is a part of AVG Safe Search Toolbar; Some malware will be a miscarriage as vprot.exe.

    If you have installed the AVG program, I suggest you to uninstall and reinstall the moy.

    If you need help with the application, I suggest you to contact AVG support.

    Reference:

    AVG forums

    http://forums.Avg.com/in-en/AVG-forums?sec=theme&Act=show&ID=1

    Let us know if that helps.

  • How downgrade Tecra S10 to Vista?

    My friend asked me to fix his laptop. There Tecra S10-11 has. He had installed Vista, but it was installed Win7.
    Now, he wants to come back that Vista, but it does not create the recovery disk. I checked the laptop and there 1.46 GB recovery partition.

    It seems too small. How can I reinstall Vista and remove the installation of Windows 7?

    I don't know what your friend did exactly and how he had installed Win7, but you can try to start the operating system from the HARD disk installation > http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm but I don't think it will work.
    So to get Vista back you have two options:
    -To order the Toshiba Recovery disk under https://backupmedia.toshiba.eu/landing.aspx and have the factory settings or
    -To install Vista using the Microsoft installation disc. All the necessary drivers, tools and utilities that you can download at Toshiba support page > http://eu.computers.toshiba-europe.com

    The second option is not so complicated and with our help, you can do this. ;)

  • Tecra S10-I can't boot from the battery alone

    Hello

    I replaced my laptop battery and once I installed the battery pack with a compatible battery Toshiba-no, that my laptop won't start not from the battery alone (Tecra S10-114) after starting was performed by the power adapter (without fixing the battery), I installed it and the OS (WIN7 Professional) recognize and recharge the battery regularly.

    I can unplug the AC and the laptop works fine until there is enough battery power. Battery plug is almost the same as the original (5100mAh - 1BRS PA3588U 10.8V) - 10.8V 5200mAh replacement battery Toshiba PA3588U-1BRS PA3356U, etc..

    Can you help me understand why he has just this problem starting and the rest works well?
    You have a solution?

    Thank you
    Luca

    > I replaced my laptop battery and once I installed the pack of battery with a compatible battery Toshiba not my laptop does not start from the battery alone

    Maybe you should use a Toshiba original battery.
    Get in touch with Toshiba ASP in your country that could send you an original and right part that is compatible with the laptop.

  • How to fix the main button to paste constantly

    How to fix the main button to paste constantly

    Short of getting a replacement from Apple or risk a repair third shop there is nothing you can do. How about a button on the home screen? Go to settings > general > accessibility > assistive touch > on.

  • Tecra S10 - e-SATA with WD MyBook problem

    I have Tecra S10-10 loaded with win 7/32 final. From the beginning, there is fixation e-sata WD MyBook problem - most of the time cannot be reached
    and Device Manager hangs up refreshing devices. Only restart after sometimes he can be attached, but only those by boot allows. All other devices works fine. Before win 7
    I worked with XP no problem also.

    I tried to update the drivers for the chipset for win 7 - but it failed with the message that this computer does not meet the minimum requirements.
    The BIOS is 2.0. Trying to upgrade the BIOS to 3.0, he replied that Intel TXT must be disabled, but it is set in the BIOS, option cannot be selected.

    No idea how to fix e-sata?

    Hi Damir

    As I see that you do have a general problem with e-SATA, but just when you want to use this device to some so I think that the solution is not so easy.
    This device is not known to me, but I suppose you guessed it with USB cable. You can use it with any other standard USB port?

  • Since iOS recent upgrade to my 5s my battery drains too quickly.  How to fix this problem?

    I recently downloaded version 10.0.2 Apple software update on my 5 and the battery drains too quickly.  It never happened until this update.  How to fix this problem?

    Hello kellyfromrexford,

    I understand that you are having a singing of fast draining of the battery you upgraded to iOS 10 on your iPhone 5s.  To determine what application or process affect the life of your battery, take a look at the information in these resources:

    On the use of the battery on your iPhone, iPad and iPod touch

    Maximize the life of the battery and battery life

    Take care.

  • friends air grille iPad blushed. any ideas how to fix

    Hi my friends iPad air 2 has suddenly had a red screen, it was not dropped or damaged, any suggestions how to fix it.

    Hey Timothy,.

    Please use Apple Support communities to get help for your friend. I can see your post iPad friends Air 2 is a red screen but has not dropped or damaged. Having a job to display on your device is essential and I'd be happy to help you get it working again. If your friend has already tried, they should perform a forced reboot. These steps are in the link below.

    Restart your iPhone, iPad or iPod touch

    If this does not get the iPad screen to display normally, then we you will get it looked further at an Apple Retail Store or Apple authorized service provider. Your friend can locate one close to them with this link here: find

    We are here to help.

    See you soon.

  • Firefox is very slow and lag for most of the sites I visit, cannot figure out how to fix.

    It started about a month or two it y a. almost all Web sites that I visit Firefox lag or stalls pure and simple script error messages, giving me the advice (not responding) to the top of the page or do not respond.

    I tried all suggestions that I found in help, including "Firefox uses too many resources", "Firefox crashes or does not ', and 'Unresponsive script - how to fix. I deleted the history, cookies and cache, reset Firefox, reinstalled, all what I can. I disabled all my extensions and modules one by one to see that if they touched, I took care of everything, including Firefox is updated. Nothing has changed behavior.

    Here, any help would be appreciated.

    How about a whole new profile?

    SEE: use the Profile Manager to create and delete profiles Firefox

Maybe you are looking for